Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

Similar Messages

Battery problem while recording videos.

I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
Does anyone have the same problem?
Thanks!

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

I'm having a problem while recording a video

'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.

Nokia C5-00 5MP

Logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

Hi there,
I also wanted to thank you for your response and let you know that I have tried all those trouble shooting things you suggest to no avail.
it seems to me that the first explanations are most likely to be the case.
namely that the program can multithread while the plugs only use one processor (particularly EXS24) which is bloody useless.
also increasing the buffer to 1024 is not an option cause you gotta bloody lay tracks, which means you gotta hear the BG tracks and play yours on top in time otherwise, you record your new tracks and they are so out of time that it sounds like a little kid wanking on a guitar or whatever...
and of course for composition with midi intruments it doesn't work at all cause your latency becomes so huge that you would need a miracle to quantize your off time notes back to normal so that you can arrange, print score, etc.
either way, I hope that my tone is not disrespectful, it is aimed at apple in frustration, I'm grateful for your help.
thank you
David

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

I have mic problem while making video and while on loudspeaker its reduce the mic volume alot.

i have mic problem while making video and while on loudspeaker its reduce the mic volume alot. plz help me out

iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Pause button problem while recording audio

Someone talked about that problem on another post but I think
that problem deserve a post for it...
We have a probleme when using the pause button while
recording audio on a slide.
If we hit the pause button, it completely deletes all
previous recording in the slide.
If someone have a long text to read for a slide he cannot
take a break and think if everything is ok. Our clients are
disappointed and calls this function.
Do you have an idea when that problem will be solved ?
Thank

Hi Edji, I could not agree more. We reported this to Adobe
months ago and it has been acknowledged, but no information will be
made availlable about any fix release date. We have over 500 staff
users making recordings using Presenter and have trained the
majority on version 6. Imagine the number of supports calls we have
had to deal with when suddenly the pause button deletes all
previous slide recordings in version 7.
Depsite many attampts to get a resolution for this we have
had nothing aside from the suggestion above which certainly does
not fix the issue. It is a significant bug in the program that has
caused us endless hours of support work.
We are quite dissappointed at present with the lack of
reponse to the need for a fix and are currently evaluating a number
of other products.
Pityful but true.

IPod Touch/iPhone 4s in a BMW - Screen size problems while playing videos since iOS5

Hi,
I have an iPod Touch 4th generation 64GB that i use connected to my 2011 BMW M5 purchased with all multimedia and iPod/iPhone options available from factory.
The car lets me play music and video playlists from the iPod and the videos can be seen on the BMW iDrive screen, when i was in iOS4 everything worked perfectly, but then i updated to iOS5 and one problem arised and then updated to iOS6 and now to iOS6.1 but the problem still persists, basically the problem consists that sometimes video size and aspect ratio of videos displayed in the car display are wrong, and some times the same videos are displayed correctly. It is just random, sometimes is OK and sometimes it is wrong, but when it starts to display wrongly, all videos following are displayed wrongly.
After trying everything i discovered that while a video is playing with wrong size and aspect ratio, i can correct this behavior, sometimes manually unlocking the iPod and entering the "Music" app and exiting, and sometimes entering the iPod configuration and exiting, just entering and exiting, and sometimes doing both of them one after another. This is a temporary sollution because it is really disturbing to do this process while driving with the iPod inside the cradle in the armrest. I wish i could downgrade to iOS4.1 where i was before and everything worked perfectly, as there are no new features i care in iOS5 or 6.
I tried restoring the device in iTunes... 5-6 times in total since iOS5 release, tried using an iPhone 4s with iOS6 and the same problem happens, so obviously it is a bug present in latter iOS that it is not initializing correctly the screen when requested by external accessories.
you can see in this BMW forum other people with the same isue: http://www.bimmerfest.com/forums/showthread.php?t=602131
I can provide photos or testing if needed
Thanks and excuse my english.

You say your turning it off does that mean you are holding in the sleep button and sliding the unit off or does it mean you are just locking the unit with the screen off?
If you have the Wifi enabled and only have the IPT in standby mode then this is why it's depleting the battery so quickly. Charge the unit till it's full with the little plug showing and then eject it and turn off wifi and leave the unit in standby overnight and see if the battery depletes at all.
I've noticed that Wifi really ***** the life out of the battery very quickly so give it a try and report back to us.

Quicktime Pro audio synchronization problem when recording

My hardware is an Intel Based Macbook Pro with the latest Quicktime Pro S/W.
I have just upgraded to Quicktime Pro and I am trying to record video from a DV source (Canon camera acting in AV in/DV out mode). The problem I am experiencing is that the video and audio are out of sync by around 1 second, th sound seems to be in advance of the video.
Are there any setting which will affect this?
Has anyone been able to solve a similar problem?

I don't know what causes the problem, but I can give you a way to solve it:
Open your DV file with latest version 3.0 of SimpleMovieX and open the tools panel, go to Audio, and resynchronize it.
The do save, either as mov or reexport as dv format, depending on your workflow.
Website to download:
http://www.aeroquartet.com/
Note: I'm the developer of this app.
Regards, BJ

Strange Problem While Recording

I have a PushBufferStream that I separated in 4, because the first one have 4 videos multiplexed. Then I tried to record one of the new PushBufferStreams by wrapping it in a new DataSource in a new Processor. I created the DataSink and started to record and it worked well. But the video file generated (an .AVI) have a strange problem. It has the duration of the original DataSource, not the duration of the recording time. If I start the original DataSource now and after one minute record the PushBufferStream by 5 seconds, the video file created have 1minute and 5 seconds. In the first image just a static image (the first frame) is shown, and in the lasts 5 seconds the video is shown normaly.
Does anyone could help me, I don�t know what could I do to solve the problem? Thanks.

just a thought, check how much memory your app is using, is it storing a minuites worth of video in memory, then when yu record for your five seconds, it's dumpng the whole lot into your avi file.
maybe empty your buffer before you record.

Audio breaking up while recording at low volumes, 1212m

emu 1212m
amd 3.7 ghz
vst 5.1
Could you help me with the proper patch mix setup?
I recorded my synth with no problems.
when I record the drums at low levels, like light cymbal work , the sound breaks up and there is noise.
When the full drum set is playing it seams to be ok, maybe there is low level noise that is just being covered up. thanks

If you record a drum-set w/ microphones through some external board (w/ mic-preamps) which is then connected though stereo or ADAT path into 1212M ...have you
- tried another mic(s)?
- checked connections (weak signal + weak connection may cause issues into signal)
jutapa
Message Edited by jutapa on 01-30-200712:59 AM

Audio line in while recording with ipod touch

Looking at buying a 5th Gen touch to record local basketball games. Need the ability to record the audio live broadcast into my live video of the game so I am wondering if I can use the video camera of the touch and record a seperate audio track with the video being recorded with a line in option. I have used a sd camcorder with a line in capability playing the local radio station audio as I record but dont know it this can be done with a ipod touch. I could use the camera app or imovie app to record but not sure if separate audio track is possible with them or will it just record from the mic of the ipod touch?

You can connect a mic to the iPod via the headphone jack and that mic will be used by the video app you use for the video camera on the iPod. I do not remember if the built-in mic gets cut off when yo do that so you may have to cover the mic hole on the iPod.

ITunes audio problem while playing video.

I have purchased several TV episodes which play just fine in iTunes on my HP Windows 7 laptop. However, on my Dell Windows XP desktop, the same videos lose the audio after a few seconds in iTunes, but the same videos play just fine in Quicktime on the Dell. Can anyone shed some light on this problem? Why would a video work in Quicktime but not iTunes using the same computer?

Hello dogsters,
The following article details a number of troubleshooting steps that should help stabilize playback.
iTunes for Windows XP: Troubleshooting video playback
http://support.apple.com/kb/TS1386
Cheers,
Allen

Problem while recording BDC

Hello Gurus,
My problem is when i run through PA40 Hiring action,the dynamic actions are working properly,but when i do the recording dynamic actions infotype screens are coming up.Could anybody help me on this.
Thanking all in Advance.
Regards,
Manoj.

That is the Std behavior of Dynamic Actions. You have to code for such infotypes with separate transaction calls.PL check the OSS Note# 386027 wherein the Dynamic Actions are explained in detail.
~Suresh

Problem while Recording Result

Hi,
While performing result recording using QE01, I am getting error like
The operation does not exist for the insp lot (and work center) entered
Please help

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

Stereo Audio Record problem (While recording video as well)

Similar Messages

Maybe you are looking for