Stereo Audio settings for dual thunderbolt displays?

I'm Daisychaining 2 x 27 thunderbolt displays off my macbookPro,
How do I get the one display to play the left audio channel, and the other the right channel for stereo audio on my desk?
thanks
walter

Check these
http://www.barefeats.com/quad14.html
http://docs.info.apple.com/article.html?artnum=304122
Read the about the Expansion Slot manager in Apple Help.
I have the ATI 1900 XT in slot 4 and 16x, but if barefeats is true slot 3 ans 8x is nearly as fast. It depends a lot on waht other PCI express cards you have installed and how fat you need to run these.
G5 1.8 DP ATI Radeon X800 XT Mac Edition, PB G4 400   Mac OS X (10.4.8)  

Similar Messages

  • ATI 1900 XT Card Settings for Dual 30" Displays?

    Just installed the 1900 card with dual 30" monitors, and a window giving me 4 options appeared. I'm not sure what the differences are... which setting will give me the maximum speed for Aperture?

    Check these
    http://www.barefeats.com/quad14.html
    http://docs.info.apple.com/article.html?artnum=304122
    Read the about the Expansion Slot manager in Apple Help.
    I have the ATI 1900 XT in slot 4 and 16x, but if barefeats is true slot 3 ans 8x is nearly as fast. It depends a lot on waht other PCI express cards you have installed and how fat you need to run these.
    G5 1.8 DP ATI Radeon X800 XT Mac Edition, PB G4 400   Mac OS X (10.4.8)  

  • Dual Thunderbolt Displays in Windows 7? Retina Macbook?

    I understand you cannot daisy chain thunderbolt displays in Windows 7 to have dual monitors? Is there another way to run Dual monitors? I have a mid 2012 Macbook pro with on Thunderbolt display. I see the Retina Macbook has two thunderbolt ports. If I got one of those, could use dual Thunderbolt displays then in Windows 7, and then just hook each monitor up to it's own Thunderbolt port instead of daisy chaining?

    No, you still cannot drive 2 Thunderbolt Displays in Windows with the MBP Retina.
    However, you can use 1 Thunderbolt display (for USB hub and LAN connection), and then use 1 Cinema display as the 2nd screen. You can chain the USB ports, but not the displays, so you do have 1 extra connection to the MBP, but that's fine.
    Windows 7 will drive this setup without problems.

  • Best audio settings for mp3?

    Hi everyone,
    I was wondering what are the best audio settings for an mp3 to import into C4?
    Thanks,
    Tina

    Yes Tina,
    I had this issue before. here is what i found:
    Record at Sample rate 44100 Hz, 16 bit, high quality publish as MP3
    Captivate settings at near CD bitrate 96 kbps,
    encoding speed 0,
    44.100 KHz encoding frequency

  • Audio Settings for Premiere CS6

    Hi, I currently run a Mac Pro with a 27 inch Apple Monitor with built in camera.  The machine is also running Mountain Lion 10.8.5.  Could someone give me some clarification as to why the Audio Settings for Premiere CS6 are the way they are?
    Example with a Macbook Pro and an iMac when I plug in a headphone I can get the sounds from Premiere pro as well as something from youtube to the headphones.  However in the case of the Mac Pro with the Apple Monitor, when the headphones are plugged in the youtube sounds come through but the Premiere sounds go through the monitor.  I'm aware of the audio settings but I suspect this is working by design because of the different audio options the Mac Pro have and there is nothing broken about this.
    Please advise.
    Thank you.

    I've always found this a bit annoying.
    The intended behaviour is that if you go into Premiere's audio settings, and choose "System Default Input/Output", it should change along with the system (so that the audio comes out wherever YouTube does). In practice, I've found this to be inconsistent in pre-CC versions of Premiere (CC fixes this).
    One tip that may be helpful for you in general on a Mac Pro:
    1. If you don't already have the volume icon in the menu bar (by the clock), enable that in System Preferences > Sound.
    2. Option-click on the icon and you'll get a quick menu of your output options

  • Output to XDCAM HD - Audio Settings for Final Sequence?

    Hi,
    If the approval gods are smiling, it'll be time to export several programs back to disc for a client in the next week or so. The original clips and the sequence are all at XDCAM HD 1080i60, 35Mbs VBR. I've ingested using Sony PDZ file transfer with a PDW-F75 deck, and everything looks/sounds great on approval QTs so far.
    My question is on the audio settings for the final sequence on to XDCAM disc. I've got 2 tracks of talent audio, 2 of nat sound and 4 of music. If I understand the FCP manual correctly, I have to select 4 mono track outputs when doing a file transfer export of the sequence. What settings do I need to choose so that the mix I hear when I play back my sequence in studio is what anyone down the line will hear when they play back the final sequence I've exported to XDCAM disc? That is, if I've got 8 active tracks, what happens to them with the 4 mono track setting? Thanks very much for any suggestions and advice.
    Pat

    Agree that the HDV downconvert in the camera is optimal.. but the darn print to video needs to work reliably to GET the hdv material back to the camera
    i still have to use iMovie to get my files back to the camera in HDV...
    FCP 5.0.4 still doesnt work well

  • I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

  • Dual Thunderbolt displays on Macbook Pro

    I have a 15" MacBook Pro (mid-2011) with two 27" Thunderbolt displays. I very frequently boot my Macbook (laptop closed) and my two displays are out of order. I always know it's a problem because one of my wallpapers get's changed. It sometimes takes several reboots to get the monitors to order properly. I sometimes have to kill power to the monitors by turning off my power strip and then they boot up properly. I've tried swapping the cables around to move the monitors, but it still always seems to get jacked up. If I tried to reorder the monitors in the display settings my dock or primary monitor is always out of whack. The problem seems to have gotten a lot more frequenty with Mountain Lion. Any ideas?

    You can use any of the USB solutions such as the Diamond BVU195, which is available for $75 and is fine for anything other than gaming or video playback.
    It works very well for spreadsheets, word processing and productivity, you can control exactly what is on each monitor and you can hook up two and go to 4 screens!
    I'm hoping thuderbolt versions will appear that will be faster and allow us to have multiple monitors at full speed!

  • When playing any audio the audio quality on my Thunderbolt display steadily worsens over an hour period and becomes garbled. Restarting the media player fixes it. Does not occur when MacBook Pro is undocked.

    When playing audio/video on my MacBook Pro docked to Thunderbolt display the audio quality steadily worsens until it is garbled beyond understanding. I don't know if it occurs when using the MacBook undocked. It takes about an hour to become noticeable and steadily worsens. Simultaneously when the computer speaks the time this is also gargled. As the problem develops it sounds like there is a static halo around each spoken word.

    Hi GeoChester,
    Welcome to the Apple Support Communities!
    I understand that you are experiencing some sound issues on your Mac that worsens over time. In this situation, the first troubleshooting step that I would recommend would be to reset your computer’s PRAM. To do this, please follow the instructions in the following attached article. 
    OS X Yosemite: Reset your computer’s PRAM
    Best regards,
    Joe

  • Dolby audio settings for Lumia 520

    As every nokia Lumia windows phone 8 device has a Dolby audio settings with a equalizer in the settings menu, there are presets and a
    custom one. This is not available in Lumia 520. This is utter discrimination,just because it is a low end Lumia device. If Nokia didn't want to give us Dolby audio settings, then why show a audio menu like in other devices and when we open its blank. This is teasing us. They shouldn't have put the audio settings in the settings menu for Lumia 520. Firmware. This is very bad nokia. Either update the firmware by removing audio from the settings or just give Lumia 520 users a equalizer. All the devices have the same chipset 520,720,620. A qualcom msm8227 with 2 krait cores and same adreno 305 gpu. But 520 doesn't have the equalizer , the other devices do have it. I expect a. Prompt reply. Nokia.

    I am so disappointed with the way this lumia 520 turned out to be. There is no speed dial function, when even typing the numbers you have to type it,fully without the phone giving suggestions. There is no means to go forwards when using internet explorer, and you cannot set personal ringtones unless you use a computer or an app that does that. It is so messed up and uncool. I just hope all these are corrected in the amber update, speaking of which we don't even know when it would be released.

  • Replacement part for a Thunderbolt display

    Hi!
    A Thunderbolt display doesn't turn on. Investigation led to a faulty chip marked as:
    ATMLH122
    04B
    IF5966B
    The problem is, we can't find a replacement chip online. Maybe it is an Apple ordered chip. Replacing the whole board is a bit pricey, as the display is not covered by warranty anymore.
    Any suggestions?

    The standard practice today is to change an entire board ilo just the bad part (I guess just easier).  Your best bet is to find a damaged TBD like on Ebay and use for parts.

  • Audio settings for airplay mirroring

    I am using MBP late 2011 mountain lion OS x and just started using the 2nd generation of apple TV and the airplay mirroring work just fine but what I want to know is how make the audio only from the mac and not the TV when I play a video and have only the video playing on the TV so I can use the earphones on the mac?

    I've always found this a bit annoying.
    The intended behaviour is that if you go into Premiere's audio settings, and choose "System Default Input/Output", it should change along with the system (so that the audio comes out wherever YouTube does). In practice, I've found this to be inconsistent in pre-CC versions of Premiere (CC fixes this).
    One tip that may be helpful for you in general on a Mac Pro:
    1. If you don't already have the volume icon in the menu bar (by the clock), enable that in System Preferences > Sound.
    2. Option-click on the icon and you'll get a quick menu of your output options

  • Dual Thunderbolt Display Order

    I have a MBP i7 with two external thunderbolt displays.  The displays are, of course, daisy-chained.  Every time I plug them in to the MBP, the order is different.  It forgets what the previous order was, and puts the menu bar on the wrong one, and moving their relative location, causing me to re-shuffle the displays in the prefpane.  Is there any way to make the preference stick?

    I called apple regarding this problem in mid january, they told me that this is a know problem.
    Also USB-Devices attached to the display get a new ID every time you re-attach the display (parallels asks me if I want to assign SnapScan #827 to Mac or Windows...).
    I just don't get why it is that complicated to re-detect the displays correctly and fix this.

  • Mouse Settings For Dual Displays

    Hi Gang
    Just  started using Dual Displays for Final Cut. Was wondering if anyone had  some tips for maximizing mouse settings? Its taking some time aquiring control of the mouse.
    Should I go to Preferences for adjustments?
    Screen Shots:
    http://www.locationstudio.net/Left.jpg
    http://www.locationstudio.net/Right.jpg
    Thank you
    Mike

    Solved
    Thank you

  • What are the best settings for a retina display image?

    If we Export for Web then view it on a retina display monitor, the image lines look blurry and it's not as crisp as non-retina display monitors.
    What are the best settings when intended for retina display monitors while keeping the file size down?
    Thanks!

    Mark, yes a DVD will play back on a HDTV, just the quality will not match the capability of the playback device. This is certainly the easiest approach though.
    As the article you referenced says, ensuring that your previews are set to a larger pixel dimension than your required output will ensure maximum quality, given that you will more than likely have movement on the images in the slide show I would suggest going with pixel dimensions that are at least 1920px.
    Let us know how you go.
    Tony

Maybe you are looking for