Stereo Bluetooth and headphone jack at the same time?

I'm looking forward to the A2DP support in the firmware 3.0 update. I plan to get a motorokr s7hd. I'd like to be able to output audio from my iPhone 3G to my car via the headphone jack. Can I also connect a stereo Bluetooth headset and just use that in the event of a phone call? Will it mute/pause the music when a call happens?

You can set the iPod app to output audio to your choice of a BT headset, or the jack output (not simultaneously). A BT headset can still get call audio if paired, but working in one channel only - no stereo.

Similar Messages

TS4113 Is there a terminal or other type of workaround to allow sound to come from the HDMI and headphone jack at the same time?

I have a late 2012 Mini, running 10.8.2. I have a set of powered speakers plugged into the headphone jack. My TV is running on a direct HDMI connection. I can only stream sound through HDMI, or even select it as an output, if I unplug my headphone speaker plug. Apple's knowlege base says this is the case. I am looking for a way to have both plugged in all the time, and have the sound mirrored to both.
I use the speakers for itunes music, system sounds, skype, etc.. The HDMI sound is for steaming content to the TV. I don't want to have to reach around behind the computer and unplug/plug each time I switch, for a multitude of reasons. Any ideas out there? Google wasn't getting me very far. Maybe a terminal solution of some sort? Thanks in advance.

it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

Win 8 - How to use StereoMix and Headphones Mic at the same time?

I am using Windows 8 64 bit and believe I may have an IDT driver problem.
I need to enable StereoMix and my Headphones Mic at the same time. I know this was previously possible with windows xp and windows 7.
What happens is If I enable either Headphones Mic (Logitech headphones with Mic) or StereoMix the other one becomes " current;ly unavailable" I cannot get them both to work together. I can get StereoMix and the Internal Mic to work together ( both enabled at the same time) but the sound quality is bad because the internal mic picks up noises from the PC. I need to have both my headphones mic and stereo mix enabled at the same time.
The driver I'm using is the one provided by HP with the laptop. It is called sp59620.exe
Would another IDT driver solve the problem? Can you think of another reason this is not working?
Here are my specs.
System Manufacturer/Model Number HP Pavillion G7-2251dx
OS Windows 8 64 bit
CPU AMD A-8 4500M
Memory 8 Gigabytes DDR3 sdram
Graphics Card Discrete ATI Radeon HD 7640G with 2 Gigs
Sound Card IDT Audio
Monitor(s) Displays 17.3
Screen Resolution 1600x900
If you cannot help, where else should I look? i have tried Windows and Microsoft forums and no one can give me an answer.
Thank you.

I have tried the instructions in that video and I cant get passed the very bad feedback i get when telling my recording device to Listen. His secone instruction from his notes here
["Right Click the Realtech HD audio device and set as default if its not already.
(note you may want to turn off any powered speakers you may have to prevent feedback.)
-Select the Recording Tab at the top of the window.
-Select the Stereo Mix device and set it to default if its not already.
-Right click and select Properties.
-Select the Listen Tab at the top of the window.
-Change the drop-down box to the entry for USB headset and check the Listen to this device checkbox.
-click ok to dismiss the window.
-Right click on the USB headset microphone device and select properties.
-Select the Listen Tab at the top of the window.
-Change the drop-down box to the entry for the Realtech HD Audio device and check the Listen to this device checkbox.
-click ok to dismiss the window.
So, essentially, the game audio will play through the Realtec, your mic is also set to play to the Realtec. both audio streams are now part of Stereo Mix. Stereo Mix is being listened to by your headset allowing you to hear the game and your voice.]
~~~~~~~~~~~~~~~~~
Don't know about turning off any powered speakers.. the only speakers I have besides the headphones are the internal laptop speakers. I get the same feedback if i have the headphones plugged in or not.

Dv6 - StarCraft II on Internal Speaker & Music Playlist on Headphone Jack at the same time?

OS: Windows 7 64-Bit (6.1, Build 7601)
HP Pavilion dv6 Notebook PC
BIOS: InsydeH20 03.60.48F.13
Intel Core i7-2670QM
8192MB Ram
Sound Device 1 (Default Audio Device): Speakers and Headphones (IDT High Definition
Driver: stwrt64 6.10.6345.0000
Sound Device 2 (Default Communications Device): Communications Headphones (IDT High Definition
Driver: stwrt64 6.10.6345.0000
I am playing music from Firefox, Internet Explorer or Chrome - music comes out nice on internal speakers OR headphone jack (connected to speakers or headphones).
I am also playing Starcraft II, the Audio is also awesome on eather headphone jack or internal speakers.
So far I can get Starcraft II to play on headphone output only and my music on the internal speakers, but not the other way around.
For this instance I'd like the in game Audio to play on my Laptop Speakers Only and my Music to play on Headphone (external analog speaker) Output only.
Please advise.
Also, I must figure out how to play both Headphone output and Internal Speakers to play together.
My ASUS Notebook PC has an Audio Console that allows me to designate which programs play with headphone output and/or internal speaker but my HP notebook does not have that.
Please help! :/

it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

HP Pavilion dv2000 headphones and speaker playing at the same time

Good Day HP
Sir/Ma'am,
I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
And please forgive me for my bad english..
Here are the system properties of my laptop.
Windows 7 Professional Service Pack 1
Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Installed Memory (RAM) : 1.00 GB
System Type: 64-bit operating system

HP Pavilion dv2000 headphones and speaker playing at the same time
germanok wrote:
Good Day HP
Sir/Ma'am,
I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
And please forgive me for my bad english..
Here are the system properties of my laptop.
Windows 7 Professional Service Pack 1
Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Installed Memory (RAM) : 1.00 GB
System Type: 64-bit operating system

Why can't I use Airplay/Bluetooth audio output and Guitar input at the same time?

Just trying to understand why it is not possible to use one of the 3rd party guitar input devices and have AirPlay/Bluetooth output turned on at the same time. it would be very nice to be able to play wirelessely to the stereo instead of adding yet another cable to the mix.
Thanks

I found the answer:
Use GarageBand for iOS with external output devices
You can use GarageBand for iOS with external devices, including AirPlay, Bluetooth, and HDMI-equipped media devices. When using any of these devices there is no support of audio input.
http://support.apple.com/kb/HT4622

HT1153 Can I sync my Apple Bluetooth keyboard with Mac G5 , iPhone5 and Apple TV at the same time ?

Can I sync my Apple Bluetooth keyboard with Mac G5 , iPhone5 and Apple TV at the same time ?

Thank's for the help, my only choice is to buy 2 more keyboards .
Too bad that there is no memory to recall different channels of Bluetooth.

Headphones and speakers playing at the same time on Win 8.1

When I plug in a headphone to my laptop the speakers don't cut out, both headphones and speakers play at the same time instead of one cutting out automatically.

You may try to reinstall the sound driver for your computer from this link http://www.sony-asia.com/support/product/sve15115en. We kindly recommend contacting the Sony Support Center in your region at http://www.sony-asia.com/section/support for your Asia Pacific model computer.

Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
So here is a summary:
BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
BT mouse and BT keyboard / Wifi OFF ----> works fine
Only BT keyboard / Wifi ON ----> works fine
Only BT mouse / Wifi ON ----> works fine
USB mouse and BT keyboard / Wifi ON ----> works fine
USB keyboard and BT mouse / Wifi ON ----> works fine
Where is the problem? Is there any solution?
Solved!
Go to Solution.

I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
Best regards, jC
Broadcom manual:
Bluetooth Collaboration
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

Dual Audio Outs? / HDMI and RCA Analog at the same time?

I am trying to figure out if the Apple TV supports dual audio output. My Onkyo receiver supports dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room). The problem is it can only accept an analog source for the second room.
I know that HDMI takes precedence over component video connections if both are connected.
Will the ATV send audio signal out of the HDMI and RCA Analog jacks at the same time so I can enjoy streaming music is two rooms simultaneously?

Iowabeerguy wrote:
I like to be a helpful soul, so I decided to pull the owner's manual from Onkyo and take a look at the receiver, without ever thinking about the model number, and come to find out, I have my Apple TV hooked into an Onkyo TX-SR606.
I appreciate that!
Iowabeerguy wrote:
Problem is, I have the HDMI into the Onkyo and the analog outs going to to another stereo receiver for the outdoor speakers. Both work at the same time, which means that the Apple TV will output both digital and analog at the same time.
Good to know.
Iowabeerguy wrote:
Now, let's look at the receiver - if you have the HDMI plugged into the - say DVD input, and it's playing through the main system, and you plug the analog outputs into the DVD analog in on the receiver, the Zone 2 out will automatically look at the HDMI input, and not put out anything to the Zone 2 outs, because it won't pass digital to the Zone 2 outs.
Oh yeah, that makes sense!
Iowabeerguy wrote:
I can't try it tonight, but I think if you plug the analog outputs from the Apple TV to an input that isn't assigned to an HDMI in, (like CD) and then set the Zone 2 amp to play that source, it should work.
I've set aside some "tinkering" time this weekend to try that. I'll let you know if it works; I think it will. Thanks again!

Can you use two bluetooth devices on iPad at the same time?

Want to use the wireless keyboard along with the Jambox wireless speaker. Will the iPad allow you to connect to two Bluetooth devices at once? Thanks!

Seven is the Bluetooth max, but you should probably not do more than three or four and then depending on the BT protocols that each device is using.
I use my Apple BT keyboard and my Cellular Innovations BT headphone clip at the same time without any issue whatsoever.

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do I do a split screen to show the contents of my Library and a playlist at the same time?

I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?

See this thread -> https://discussions.apple.com/thread/5666364

Stereo Bluetooth and headphone jack at the same time?

Similar Messages

Maybe you are looking for