Stereo bluetooth problems ( Volume control & Video out of Sync )

I just got a Sony HB-IS800 Stereo Blue-tooth Headphone for my iPhone 3GS.
There are a number of problems with 3.0 and stereo blue-tooth.
1) The biggest issue is no volume control on the iphone when you connect your blue-tooth headphones. the sound is set at a loud volume and there is no way to adjust it at all.
2) The second issue playing video on the iphone and the sound on the headphones are out of sync with the video's audio about a second or two. Sometimes I play a movie and don't see this issue or it is not that bad. All video Podcast are always out of sync.
I have test this on my iMac and I can adjust the volume and don't have audio sync problem at all.
I was wondering if in the 3.1 iphone firmware are these issues fixed in anyway?

Here's another thread on the same topic:
http://discussions.apple.com/thread.jspa?threadID=2043270

Similar Messages

  • IMovie Problems: Photo import and audio-video out of sync.

    Photo import problem:
    Some times, I have problems importing photos onto my new project, the photos will appear to be that just one same photo when played. It does not transit to the other photos following the first, it's just stuck on the first. Is this just an issue with iMovie '11? Are there any other ways to resolve this problem?
    Audio-video out of sync:
    I've checked some other discussions but I'd like to raise this issue again for APPLE. There are problems exporting my 7-minute film - the video and audio go completely out of sync no matter what format I export it to. There are not a lot of clips used. I'm now trying the method to detach the audio files from the video, hopefully it works.
    These issues are bothering me, in addition to a failed firmware update on Mac OSX 10.7.2 a few weeks ago. I couldn't open my computer and I had to go to the Genius Bar to have them help me backup my files on my computer and reinstall the whole system again. Anyways, any help to the above iMovie issues are greatly appreciated. Just wish that Apple will address these current issues and not just focus on improving their products with awesome features ._.

    Hello,
    Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
    <object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

  • Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

    I am having a problem with audio/video sync between my  PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

    I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored.  Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

  • Audio and video out of sync on short recordings

    I've scanned the discussions and see that alot of posters are experiencing
    the same problem I'm having which is recording quicktime movies
    and getting audio and video out of sync.
    In most of those posts the responses seem to be that the problem gets
    bad if you're making a long recording. I'm experiencing that, but...
    ...I'm also having the same problem on really short recordings...less than a
    minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
    I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
    Any thoughts on why even short recordings through Quicktime are out of sync?
    Thanks.

    I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
    I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

  • Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

    Hello,
    I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
    Any suggestions would be great.

    Hello,
    Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
    <object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

  • Stereo Bluetooth problem on MacBook Pro 13" 2.26GHZ

    I finally received my Jabra BT620s Stereo bluetooth headset. Connecting to the MacBook no problem. button controls work like a charm but the sound is terrible.
    It has a high pitch static through all the sounds from different players (iTunes, VLC)
    But there no problem with the sound when I connect it to on my HTC Dream, HTC Universal and asus EEEPC 1000.
    What can be the problem?
    What can I do to solve this problem?
    Thanks in advanced
    Tjikko

    Hi there,
    You may find the troubleshooting steps found in the article below helpful.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    -Griff W.

  • Optical cable is in-volume control greyed out

    Hi,
    I just wondered if it possible (when using external speakers via optical cable)to control the volume by using the volume control (on the top right of screen)
    -my slider is greyed out and the only way I can adjust the volume is within an application itself.
    kindest,becca

    You're welcome! I think they were trying to make it easier by having a single volume level leaving your Mac and adjusting it only on one device. If you turn down the volume on the Mac and turn it up on the stereo, things could get really loud later when you switch your stereo to the radio!
    -Doug

  • Bluetooth blocks volume control

    Hi everybody.
    I am having fun with my iMac (late 2011 + 10.7.3) aspecially with software bugs.
    One of them is following:
    Volume controll keys on my wireless keyboard do not controll sound. Doesn,t matter which one I press I do see the icons on the display but there is no effect on volume level. The sound "speaker icon" on the system bar is inactive and when I press it I see that slider is frozen at the very bottom and can't be moved.
    I found the problem is clearly linked to bluetooth. Solution is there although annoying.
    Switch your iMac off.
    Remove batteries from the wireless keyboard.
    Switch your Mac on.
    Sound is back, and after placing batteries back in your keyboard you can see also that sound keys are working again. Unfortunatelly you have to make this operation each time when you switching your iMac off.
    By the way, Macs were supposed to be so free of bugs. Crap.
    Can anybody help me if there is any permanent fix?

    Hello:
    Try resetting the PRAM and SMC.
    Barry

  • Audio and Video Out of Sync  -AV sync problem

    Edited a bunch of clips together from Canon T1i 720p, iPhone 3GS, Canon SX110, and Sony DSC-W70. About an hour long. Everything looks great when played within iMovie '11, but when exported, the audio and video get out of sync. It gets progressively worse the farther along you are in the sequence. AV is as much as 6 seconds off by the end!! Audio is ahead of the video. I've tried exporting in several different ways including: Export to iDVD, Export to Media Browser 720p, with the same results.
    Anyone else having this problem? I know I've done this with success in the past with iMovie '09.

    Im having the same issue I have a project that is 9 minutes long tried all before even looking at the forum but It will not sync. Some one even told me to repair the permissions so nothing worked. I went to the Mac store no body knew what I was talking about so they asked me to call Apple so I did and was hung up on 3 times not only that but I was advised since I just bought the product I did have 3 months of tech support.
    I mean I'm having an issue and they tell me I have 90 days of free service? This has got to be a joke. I than asked well can I just take it back and instal my 09 back? I was advised nope you wont be able to do so and you cant get your money back.
    After this whole mishap I did learned that the less snips and clips and editing is on the project the sync and video will be ok but if you have lots clips such as most of us than we will continue on having this issue.
    We need a fix ASAP

  • Why is the volume control grayed out?

    Hi,
    I am attempting to record from a Sony ECM-MS957 mike that is connected to my iBook with a Griffin iMic onto GarageBand3.
    I am following the "Learn to Podcast" tutorials from Apple. With the Sony mic connected the volume control in the track info window is grayed out. If I un-plug the Sony mic and use the built in mic the volume control becomes active.
    I have the iMic selected in the System Preferences and the volume indicator responds to the mic. The iMic is also selected in the GarageBand preferences.
    Can someone explain to me what I am doing wrong here.
    Thanks

    http://www.thehangtime.com/gb/gbfaq2.html#volumesliderdimmed
    (BTW, there's no need to select the iMic in System Prefs) --Hang

  • Photo booth - audio video out of sync problem

    Hi
    I'm using Mountain Lion 10.8.1 and Photo Booth 5.0
    Photo Booth has severe audio video syncing problems!! When I record a video, the audio is out of sync with the video.
    I managed to get it to "sort of" work: every time I want to record a video, I restart the program. I also wait a few seconds to say something after I started to record. Movies longer than a couple of minutes are always out of sync, even when I restart the program....
    Untill now I haven't been able to find a sollution for this problem. I searched the web and more people are having these difficulties and don't know how to fix it either....
    Maybe someone here knows the answer to fix this problem?
    I hope apple will fix this problem in their next update???
    Nice regards!

    Hi
    I found the solution for the audio / video sync problem in Photo Booth!!!!!
    Go to your Launchpad and open audio/midi configuration. Make sure that your input and output has the same settings. I changed the input and output to 2 channel 16-bit 44100,0 hz. And this did the trick for me!!
    Now I can record as many video's after each other without restarting the program and they are all synced one hundred procent!!!!
    PROBLEM SOLVED ;-)

  • FX5900 Problems with S-video out

    I've been trying to get a signal to my miniDV video camera, Cannon Optura PI, through S-video cable. Here's what happens:
    1. Monitor connected to VGA, Camera to S-video out - Camera goes black when windows loads.
    2. Camera only connected to S-video out - It works fine on camera, full color.
    3. Leave camera plugged in, reconnect monitor to VGA - Now monitor goes black when windows loads.
    How can I get both the camera and the monitor to work at the same time?
    As a test I hooked an LCD projector to the DVI out. I was able to get the projector and the monitor to work simultaneously. S-Video wouldn't work at all with the projector.
    I've used MSI live update to ensure all my drivers/bios are current.

    I bought two of those cards on eBay when I was looking for a second Video Card for some Video Editing systems.
    The largest chip in the Component side of this PCI-slot card has the ATI-3D logo, and characters below call it RAGE LT PRO AGP. A chip nearby has a paper label that says: LTP 328 and 54104. PN 109-54100-00 is silk screened next to the ATI logo on the corner.
    There is also a 20-pin rectangular connector labeled "DEF". I have never seen display gear that plugged into that. Any ideas what that one is?
    These cards worked great (off the VGA connector) in Mac OS 9, But OS X 10.3.9 would not deal with them except in 256-color mode.

  • Audio and video out of sync after exporting sequence

    I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
    My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
    Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
    Video is 61 minutes and 27 sec long
    Audio is 61 minutes and 38 sec long
    That means exported video is shorter than original sequence.
    What could that be ?

    I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
    Good luck!
    Message was edited by: Anthony M Kassir MD

  • Why is audio & video out of sync in the source monitor?

    It is my second day with Premiere Pro CS5.5. I dit something and now is the source material out of sync. I re-imported the clip but it is still out of sync. All the other videos are fine. Please help!

    Not nearly enough information for anyone to try and help
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some is general about your computer and OS, some is specific to video editing
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Maybe you are looking for