Stereo input for Value Live c

Hi
I have a Value Li've card and am using Cakewalk 2000.
This does everything I want to do well and at very good quality except I want to be able to record via mic in stereo (or voice and instrument at the same time).
If I understand the manual correctly the mic input is mono and that is all I seem to be able to get it to do?
The line input is stereo.
Is there any way to input from two mics
Thanks
Barry

You have to set the line input in GB's prefs, not the System's.

Similar Messages

Stereo inputs for ripping Lps on a g3 B&W, how can I do it?

First time caller / first time mac.
I just finished reviving a G3 system to use as a sort of retro-jukebox, only to realize that the mic input is mono only. Is there a pci card that I can get that will allow me to input a stereo line/mic level signal?
I am looking for a prosumer level of quality. Can i hack into the cd audio line that comes out of the back of the cd-drive? Or will that only work under os 9? Are there any other inputs on the motherboard that will take a stereo signal? I am ready with a soldering iron if need be.
Any sugestions would be greatly appreciated.
Can i use iTunes for Lp recording to mp3 and will it split tracks?
FunkyMonkeyPiE
G3 B&W/300mhz/1024M Mac OS X (10.4.7) LG cd r/w

As far as my CPU, I just recently added it, and am still making up my mind about whether it was a good upgrade from my previous OWC 533MHz G4. The Beige bus is already at 66MHz, so I don't have the bus-reduction issue of the B&W when used with this particular CPU upgrade. You might find some user reports of that CPU in the B&W at
http://www.xlr8yourmac.com
and see if they note any difference. I imagine potentially it may have some impact on PCI devices that really require the higher bus speed, but aren't most of those cards backwards compatible so they should function at either bus speed? I guess it depends on how performance sensitive your applications/hardware is and the trade-off you get with the faster CPU. I would guess that, typically the devices or interfaces themselves are the bottleneck, not the system bus, but that might not be true in all cases.
Off-topic - My one complaint with my Beige Desktop, is that the main reason I wanted to max out the CPU, and PCI graphics, was to get better performance with games like Nanosaur, OttoMatic, Enigmo, etc. but now I get random system freezes, also during DVD playback, after a few minutes of play. XPlane v6 and v8 also crash on me, the display just freezes and I get no response, I can usually reboot immediately just fine. I'm not totally sure what the culprit is, as I did several simultaneous upgrades, the 1GHz CPU, ATI Radeon 9200, and 10.4.7. My system had been very stable with a OWC 533MHz G4, ATI Radeon Mac Edition, and 10.3.9, but performance in the games was not very good. So, my maxed out sytem may be taxing the power supply or possibly overheating, I'm not sure. For normal Office apps, e-mail and internet use it is stable and fairly snappy. Booting, starting Classic and opening apps is faster now, but as far as my original goal of trying to upgrade to a semi-usable gaming machine, my attempt was futile. I might downgrade back to 10.3.9 and see if that helps. Eventually I will devote this machine to serve as a digital jukebox and photo album and get a newer machine for primary use and games, so it will probably continue to work well for a few more years. Adding the hardware has been a learning and enjoyable experience, if not an expensive one.

Stereo input on SB

When I send a stereo signal on SB 5. using a Y cable into the input, my computer only receives a mono signal.

picklehammer wrote:
Alright, I've been trying to record from various instruments and devices... (synth with /4 inch stereo output to /8 inch convertor, cd player with /8 inch output, guitar to amp to /4 inch stereo output to /8 inch convertor)Basically, I want to record in stereo sound.) Does line-in on the SB Audigy 2 Value card have stereo input? Whenever I've tried to record, I have only been getting the left channel. 2) Where's the game controller / midi input? Do I have to purchase the optical digital i/o 2 add on? And if I do, will this even work with the Audigy 2 value? 3) Does the SPDIF work as a stereo input for any of the devices I've been trying to record from at all? or does it require the I/O device I just mentioned?Thanks in advance,Tyler Pantella
You just can't record analog mono instruments as stereo without a stereo microphone.
If you mean to record a signal which 'stays in the middle' and not 'panned left or right' then you need
- mono to L+R (stereo) convertor adapter
or
- mono to R+L (stereo) cable
between (pre)amplifier output and soundcard input.
<i>Note: Normally instruments are recorded mono --> easier to set instrument positions in final stereo mix</i>.
) yes it is stereo
2) no game/midi on Value. Purchasing Digital I/O won't make any difference to this.
3) dunno, see yoyr user manual
.jtp

For new entries pass input screen values to PBO of maintenance view

For maintaining Z table using a customized program with selection screen and FM   'VIEW_MAINTENANCE_CALL' is called . Its working fine for selecting existing entries as per selection screen values. In case if there is no entry found as per input values the maintenance screen comes blank with "No entries found that match selection criteria".
Instead of this want to pass input screen values on maintenance view if no entry is found thru PBO selection screen. The total & extract tables are empty. No suitable event is found. How this can be done.
Thanks
pt

You could try in a first step to read database to check existence :
CALL FUNCTION 'VIEW_GET_DATA'
EXPORTING
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist
    data        = data
EXCEPTIONS
    OTHERS      = 1.
If data found, call the view maintenance
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    action      = 'U'
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist.
else create one new record providing required value in a work area
CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
    EXPORTING
      action               = 'INS'
      view_name            = 'ZXXXX'
      insert_key_not_fixed = ' ' " if full key provided
      no_transport         = 'X'
    TABLES
      dba_sellist          = it_sellist
    CHANGING
      entry                = wa_zxxxx
    EXCEPTIONS
      OTHERS               = 1.
Regards,
Raymond

Value input for screen and to apply it to formula in Query Designer

Hi Gurus !
How could i input an value for screen in BEx and soon to apply it to formulas resident in cells in Query Designer, the result must be appear for each cell in the report.
Thank You for your helps.

create a variable with Manual/user input option.
use its value to populate the calculated field.

Formula variable for a user input DATE value

Hi All,
I want to create Formula variable for a user input DATE value as I need to use it in a formula to compare between user entry date & date in the DSO. Does any body has any idea about it?
I tried to create formula variable with manual entry but then I am not getting DATE option.
Regards,
Sonal

Hi ,
You have to create a formula variable in the formula.
The formula variable in the general tab would have the reference characteristic as your date characteristic on which you have created a user entry variable or on which you intend to create a date entry variable.
Give the proceesing type as replacement path.
Next in Replacement path mention you would replace the variable with value of another variable.
Mention the variable name.(This is the actual varaible created on the selection screen),
Also mention you would replace only from value/to value of the variable.
Check the following help link
[Replacement path type formula variable|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
Hope this helps,
Best regards,
Sunmit.

Is there a way to have some sort of stereo mix audio input for mac?

Is there a way to have some sort of stereo mix audio input for mac? also so i can have a voice over?

polyglotinc wrote:
Actually, after scouring the web, I see that RogueAmoeba also has a free utility called LineIn which simply sends the audio in to the audio out and doesn't interfere with other programs like iTunes!
On the other hand, after downloading and trying it, there is a noticeable latency between what goes in and what comes out.
The latency is in the computer, not the software. Most of the latency is in the A/D and D/A conversion.
You need to connect the analog input to the analog output directly to get zero latency.
Check this page:
http://forums.macrumors.com/showthread.php?t=368834

Every value of an InfoObject as input for a customer exit in Query

Hi,
I have a Query which shows a contract number in rows and an amount in columns. Now I want an additional key figure in columns which should be filled through a customer exit. This exit should read from another DSO an additional amount for every contract number (that means every contract number per row should be used as input for the where statement of the DSO select).
Can anyone tell me if this is possible and which is the best way to realize this?
Thanks and greetings,
Sebastian

you cannot have customer exit for such requirement
then use virtual KF concept
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true.

Max voltage input for 16 PCI & Live 24-b

Does anyone know what the max input voltage is for the 6 PCI model SB4740 and the Li've 24-bit Model SB040 is?

Input for SoundBlaster cards is listed as 2 VRMS (for PCI cards) with a recommended input limit of volt. AFAIK, this applies to all SoundBlaster cards.
http://developer.creative.com/faq/fa...topic=80#faq52

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Variables/Input Parameters Value help not showing texts

Hello,
I have created a crystal report based on a calculation view in Crystal Reports for Enterprise 4.1 SP5, which has a input parameter on the field "Region". For the value help, I am using a custom view based on T005U in which I have made sure that RegionName field is present in the "Label Column" property of the Region field.(Required for viewing descriptions of LOVs).
In the crystal report, while previewing data in the query builder, I am able to see the value help for the input parameter in the prompt screen, which displays only the key part, but does not display the description of it. Moreover, after accepting the prompt value, the preview runs into an error(as shown below). Please note that I get the error below only when Region is a part of the output fields of the query.
Instead of input parameter, when I create a variable on the region field in the main calculation view, with the same value help view, I am able to do data preview in the query builder as also data appears in the report on running the query. But, just as in the case of input parameter value help in the prompt screen, even over here, I am only able to see the key part and not the description.
Are variables/input parameter LOV's supposed to display descriptions or just the key part? As also, any reason why I should be getting this error while using Input parameter?
Kindly let me know if I am missing something in the development of this report.
Regards,
Alston

Hi,
I hope you are taking the BEx Query as a source to the crystal report. In the BEx query check region info object should is maintained as Text and Key. If text is not maintained over there you will not be getting text in Crystal reports.
Krishna.

Bind input field value to a variable fails

Business need : The user wants to re-evaluate lines by a percentage value which he fills via his BI-IP screen.
I created an INPUT FIELD in WAD and I am trying to link a variable value (initially created in BI-IP through transaction RSPLAN)
to this INPUT FIELD.
Whenever I fill the input field with a value, the value is not being transferred to the variable.
Please help how to bind an INPUT field value to a variable to be transmitted to a planning function.
I have made many trials but in vain.
Please help.

Hi.
I will present my scenario (it works in my system). From this scenario you may "cut" implementation for your scenario.
Lets sat I have an input fileld item and I want to read value (in my case numeric value) and pass this value to any planning sequence.
1. Create in Bex variable (in my case it is formula variable) lets say Z_INPUT_VAR
2. In WAD, when you executin planning sequence (lets say by pressing button execute) in command EXEC_PLANNING_SEQUENCE_SIMPLE define data binding.
When you clicked data binding->variable input MANUALY your variable name (Z_INPUT_VAR) in popup window.
3. In variable type select (ITEM_INPUT) type
4. In web item select your input field item.
This way you will pass inputed value to vaariable and planning sequence.
Then in planning function you also may use VARV() to read value of Z_INPUT_VAR variable.
Regards.

Unable to Give Input for my Program in JDEV 11g(11.1.1.3.0)

I'm using Windows 7_Ultimate -32 Bit OS with Administrator Priviliges
I'm trying to Run The Following Program
package appln;
import java.util.Scanner;
public class arr {
public static void main(String[] args) {
Scanner so = new Scanner(System.in);
System.out.println("Enter a value into variableID");
int id = so.nextInt();
System.out.println("Variable ="+id);
I'm getting the following errors in "Extensions" Sub window of Output window
oracle.BC4J:
Warning: Classpath entry D:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
oracle.xsqldt-ide:
Warning: Classpath entry D:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
Unknown Source: "Error: Field {0} of analyzer {1} references undefined bean {2}
The MAIN purpose of the program is to Accept input into variable named id and display to output.
Program Compiled Successfully but while the program is running,
Out put is "Enter a value into variableID"
And i'm unable to give input i.e unable to place cursor to give input
Also i've configured the Input Settings as Mentioned in the BLOG at "http://blogs.oracle.com/shay/2008/02/enabling_user_input_when_runni.html"
Even though the same thing thing is being repeated
But when i've run the program in NET BEANS IDE 6.9.1, the program is compiled and runned well.

John Stegeman WROTE: " Any way to avoid what, exactly?"
I mean that every time we need to insert the cursor into INPUT field using mouse then input the value and press enter.
But for large input's it becomes tedious to each time place the cursor in Input field.
SO i meant to avoid this.
How can i avoid this.
Also you've mentioned me to run program's out of JDEV, if i do so i will be mising the Beauty and Advanced Capabilities of "ORACLE JDEV 11G".
So i can't use any other IDE Than JDEV.
Also can we Modify the way JDEV prompts for input's rather than this INPUT Field i.e by enabling the user input field for every program.
If there any, please mention.
Thanks for help in advance :)
Edited by: Tejaswi.B on Jan 22, 2011 11:30 PM

To Display Input Field Value in Pop Up

hii guys i want to display a input field value in a pop up dialog box.
For this i have taken a input field, a pop up component and a button.
In the dialog box of pop up element i have taken an output text which will display the value of input field.
Everything seems to be work fine if i am giving the value to input filed at design time.
But when i want to display the input field value entered at run time, the dialog box of pop up displays nothing..!!!

Thank you so much Arun for your help.
I did as you told me to do.
But somehow i think i am not getting it right.
I created a private String variable named value in my Bean Class and then i created its accessors..
setValue and getValue..
Then i set the value property of both input text and output text as #{package.BeanClass.value},
but its not working...!!!
Can you help me out with problem..!!

How to pass the ObjectType as input for search Criteria

Hi All,
I have search function that takes the input parameters and returns all the matching rows. this is straight forward only. My problem is having multiple types as a input parameter. that is the reason i am not able to pass the input value for these types.
My Input Type table looks like this.
CREATE OR REPLACE TYPE T_T_PARTY_REQUEST_CRITERIA
AS TABLE OF T_O_PARTY_REQUEST_CRITERIA;
CREATE OR REPLACE TYPE T_O_PARTY_REQUEST_CRITERIA
AS OBJECT
SYSTEM_IDENTIFER VARCHAR2(50),
PROCESS_TYPE VARCHAR2(50),
UPDATED_BY VARCHAR2(50),
STATUS VARCHAR2(50),
CHILD_REQUEST_INDICATOR VARCHAR2(25),
TRACKING_REQUEST_INDICATOR VARCHAR2(25),
REQUEST_TYPE VARCHAR2(50),
REQUEST_TYPE_CLASS_NAME VARCHAR2(50),
PARTY_KEY_IDENTIFIER T_T_PARTY_KEY_IDENTIFIER,
ADDTN_IDENTIFIER_INFO T_T_ADDTN_IDENTIFIER_INFO
Last two inputs are type again.my question here is how to pass the values for these two T_T_PARTY_KEY_IDENTIFIER and T_T_ADDTN_IDENTIFIER_INFO. I have defined the the last two types following.
CREATE OR REPLACE TYPE T_T_PARTY_KEY_IDENTIFIER
AS TABLE OF T_O_PARTY_KEY_IDENTIFIER;
CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_INFO
AS TABLE OF T_O_ADDTN_IDENTIFIER_INFO;
CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_VALUES
AS TABLE OF T_O_ADDTN_IDENTIFIER_VALUES;
CREATE OR REPLACE TYPE T_O_PARTY_KEY_IDENTIFIER
AS OBJECT
PARTY_KEY_TYP_NM VARCHAR2(50),
PARTY_KEY_VALUE VARCHAR2(50)
CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_INFO
AS OBJECT
ADDTN_INFO_KEY_TYP_NM VARCHAR2(50),
     ADDTN_IDENTIFIER_VALUES T_T_ADDTN_IDENTIFIER_VALUES
CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_VALUES
AS OBJECT
ADDTN_RQST_VALUE VARCHAR2(50),
ADDTN_RQST_VAL_DT TIMESTAMP(6),
ADDTN_RQST_VAL_NUM NUMBER(19, 2)
I have pasted the query here from my function. when i pass the null as part of input for these 2 types my query is working. otherwise it is saying invalid Identifier.First I tried with first Type.
I am passing the value as
(PRKYTP.PRTY_KEY_TYP_NM = ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM IS NULL);
Error is Error(34,147): PL/SQL: ORA-00904: "ITTPRC"."PARTY_KEY_IDENTIFIER"."PARTY_KEY_TYP_NM": invalid identifier
SELECT DISTINCT T_O_PARTY_REQUEST_IDENTIFIER(PR.PRTY_RQST_ID) BULK COLLECT INTO T_T_P_R_CRITERIA
FROM TABLE(CAST(I_T_T_PARTY_REQUEST_CRITERIA AS T_T_PARTY_REQUEST_CRITERIA)) ITTPRC,
PRTY_RQST PR
JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
WHERE (BIAP.BUSN_APPLC_NM = ITTPRC.SYSTEM_IDENTIFER OR ITTPRC.SYSTEM_IDENTIFER = 'ALL' OR ITTPRC.SYSTEM_IDENTIFER IS NULL)
AND (INTPTY.INTN_PROCES_TYP_NM = ITTPRC.PROCESS_TYPE OR ITTPRC.PROCESS_TYPE = 'ALL' OR ITTPRC.PROCESS_TYPE IS NULL)
AND (PR.UPDT_BY = ITTPRC.UPDATED_BY OR ITTPRC.UPDATED_BY = 'ALL' OR ITTPRC.UPDATED_BY IS NULL)
AND (INSTS.INTN_STATS_NM = ITTPRC.STATUS OR ITTPRC.STATUS = 'ALL' OR ITTPRC.STATUS IS NULL)
AND (PR.CHLD_RQST_IND = ITTPRC.CHILD_REQUEST_INDICATOR OR ITTPRC.CHILD_REQUEST_INDICATOR = 'ALL' OR ITTPRC.CHILD_REQUEST_INDICATOR IS NULL)
AND (PR.TRACK_RQST_IND = ITTPRC.TRACKING_REQUEST_INDICATOR OR ITTPRC.TRACKING_REQUEST_INDICATOR = 'ALL' OR ITTPRC.TRACKING_REQUEST_INDICATOR IS NULL)
AND (RQSTYP.RQST_TYP_NM = ITTPRC.REQUEST_TYPE OR ITTPRC.REQUEST_TYPE = 'ALL' OR ITTPRC.REQUEST_TYPE IS NULL)
AND (RQSTYP.RQST_CLASS_NM = ITTPRC.REQUEST_TYPE_CLASS_NAME OR ITTPRC.REQUEST_TYPE_CLASS_NAME = 'ALL' OR ITTPRC.REQUEST_TYPE_CLASS_NAME IS NULL)
-- AND (ITTPRC.PARTY_KEY_IDENTIFIER IS NULL);
-- AND (ITTPRC.ADDTN_IDENTIFIER_INFO IS NULL);
AND (PRKYTP.PRTY_KEY_TYP_NM = ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM IS NULL);
can some one tell is this approach is correct. if not suggest me.

I am passing the value as
(PRKYTP.PRTY_KEY_TYP_NM = ITTPRC.PARTY_KEY_IDENTIFIER.PARTY_KEY_TYP_NM OR Here PART_KEY_IDENTIFIER is a Nested table. So you cant join it like that.
Try like this
prkytp.prty_key_typ_nm in (select party_key_typ_nm from table(ittprc.party_key_identifier)) orHere is a example based on EMP table.
I have created following nested table.
SQL> create or replace type my_emp_list as table of number(10)
2 /
Type created.
SQL> create or replace type my_dept_obj as object(deptno number(10), emp_list my_emp_list)
2 /
Type created.
SQL> create or replace type my_dept_tbl as table of my_dept_obj
2 /
Type created.I am going to use the below nested table data in a query to get value from emp table
my_dept_tbl
   my_dept_obj
     10, my_emp_list(1,2,3,4,5)
   my_dept_obj
     20, my_emp_list(6,7,8,9)
)The query would be like this
SQL> select e.*
2    from emp e
3    join table
4         (
5           my_dept_tbl
6           (
7             my_dept_obj
8             (
9               10, my_emp_list(7839,7782)
10             ),
11             my_dept_obj
12             (
13               20, my_emp_list(7566,7369)
14             )
15           )
16         ) t
17      on e.deptno = t.deptno
18     and e.empno in (select column_value from table(t.emp_list))
19 /
     EMPNO ENAME JOB              MGR HIREDATE         SAL        COM     DEPTNO
      7839 KING   PRESIDENT            17-NOV-81       5000          0         10
      7782 CLARK MANAGER         7839 09-JUN-81       2450          0         10
      7566 JONES MANAGER         7839 02-APR-81       2975          0         20
      7369 SMITH CLERK           7902 02-APR-81       2975          0         20
SQL>

Stereo input for Value Live c

Similar Messages

Maybe you are looking for