Stereo output has stopped working?!

Hey guys,
As of quite recently, any 3.5mm to RCA cable (stereo jack to RCA) I plug into my headphones out or line in won't produce 2 channels of audio. When I use headphones there are still 2 channels. I don't think anything in the Audio MIDI setup has changed, but I can't be certain. Can anyone give me some insight as to what might be wrong? Thanks!

ccf-
The only thing that comes to mind is to take a close look at the headphone plug and compare it's length to that of one that is not working. I have heard of some plugs being the wrong length, and therefore don't make proper connections when plugged in. The difference is very small so look carefully.
Is it possible that these are splitters and not stereo cables? I know, dumb question, but I'd hate to overlook the obvious.
Are the cables that you are using known good through testing on another piece of gear?
Just some thoughts. I know it isn't much but maybe it will help.
Luck-
-DaddyPaycheck

Similar Messages

Optical audio output has stopped working - can anyone help?

My optical audio output has suddenly stopped working. I use the Mac Mini as a music centre, so use the optical out all the time. The analogue signal works (when I plug in headphones, I can hear the music) AND I have checked my audio system by plugging another Mac mini into it and it worked.
I can see the red laser light from the cable when I unplug it.
I have not changed any settings.
I presume this is a hardware failure - but it seems like a strange one as the analogue audio is working.
Any ideas?

try some of the usual troubleshooting steps:
_*resetting your Mac's PRAM and NVRAM*_
_*resetting the System Management Controller SMC*_
also, run _*Apple Hardware Test*_, using the installation DVD that came with the mini, to see if any hardware problems are reported.
JGG

HT5783 My MacBook Pro (Mid-2009) digital output has stopped working. It turns on the red light at the other side of the plug, but fails to connect with my receiver. Output from Airport works fine.

It was working fine until now, and now suddenly, the sound is gone. I've tried PRAM and SMC reset. Nothing works.
Using the same cable with my airport express, through airplay, the sound comes out fine.
It wasn't working when on Mavericks, nor now, on Yosemite.

Hey marcalc,
Thanks for the question. I understand that you are experiencing issues with the digital output of your MacBook Pro. The following resource may provide a solution:
OS X Mavericks: If you can’t hear sound from your speakers
http://support.apple.com/kb/PH13841
If you’re trying to listen through a digital receiver
If you’re using your computer’s digital output port (not available on all computers), choose Apple menu > System Preferences, click Sound, then click Output. Make sure Digital Output is selected.
Make sure your computer is connected to a digital-ready receiver using an optical digital cable, and that your receiver is set up for digital input (see the information that came with your receiver).
Try adjusting the volume on your receiver. You can’t use the computer’s volume controls to adjust the volume while using digital output.
Thanks,
Matt M.

Please HELP, "iTunes has stopped working" error after connecting iPod video

People please help me out! I have a Razer Blade gaming laptop with Windows 8 64bit.
I have an iPhone 5, iPad 2 and an iPod video (80GB). I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video. I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
Procedures that I already tried and that were unsuccessful to solve the problem:
Uninstall Quicktime
Uninstall iTunes and reinstall
Reset the iPod (several times)
Delete TEMP files on computer
Restart the computer (several times)
Use a different cable and a different USB port
The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors. My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
Thanks very much!

It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
When the OUI tries to launch,the following error appears
setup.exe has stopped working.
Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
Thanks.
Edited by: 4joey1 on Apr 12, 2011 11:35 PM
Edited by: 4joey1 on Apr 12, 2011 11:36 PM

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

Adobe Flash Player 11.3 r300 has stopped working

I have Firefox 13.0.1, Win 7 Home Edition 64 bit, latest adobe flash player version 11.3.300.262. Latest nvidia drivers 301.42 - WHQL, 260 gtx nvidia card. I did a clean reinstall for nvidia drivers, and flash drivers, still same problem.
Everytime I go to fullscreen mode, my screen turns white and I have to left click on my mouse so the white screen goes away(otherwise the white screen hangs indefinite), I get a windows message stating adobe flash player has stopped working. After that I get send crash report for adobe.
Image to when the flash crashes. http://i.imgur.com/fX7Ld.jpg
This never happened with Adobe flash player 11.2, never. With the latest update it crashes, everytime I go fullscreen. This happens on http://www.twitch.tv streams, any livestreams. Youtube seems to be fine, when going fullscreen mode. And no, I don't have RealPlayer installed. I only have 3 addons installed and enable. Adobe Acrobat, Flash, and Silverlight, all latest editions. Everything else is disabled, or uninstalled.
I've Disabled Hardware accelartion in firefox still same problem, but with flash hardware acceleration enabled. I've tried Firefox Safe mode with all addons disabled, same problem.
Crash Reports.
https://crash-stats.mozilla.com/report/index/bp-db458853-46d7-4652-be50-3f09f2120626
https://crash-stats.mozilla.com/report/index/bp-df9bc417-e54c-4f8e-b25c-6cf602120626
This issue does not happen when hardware accelaration is disabled in flash settings.
Please fix this issue.
Dxdiag.
System Information
Time of this report: 6/26/2012, 19:03:22
       Machine name: -------
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
           Language: English (Regional Setting: English)
System Manufacturer: Alienware
       System Model: Aurora
               BIOS: Default System BIOS
          Processor: Intel(R) Core(TM) i7 CPU         920 @ 2.67GHz (8 CPUs), ~3.2GHz
             Memory: 6144MB RAM
Available OS Memory: 6134MB RAM
          Page File: 1893MB used, 10374MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 32bit Unicode
DxDiag Notes
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
        Sound Tab 2: No problems found.
          Input Tab: No problems found.
DirectX Debug Levels
Direct3D:    0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
          Card name: NVIDIA GeForce GTX 260
       Manufacturer: NVIDIA
          Chip type: GeForce GTX 260
           DAC type: Integrated RAMDAC
         Device Key: Enum\PCI\VEN_10DE&DEV_05EA&SUBSYS_073810DE&REV_A1
     Display Memory: 4071 MB
   Dedicated Memory: 1767 MB
      Shared Memory: 2303 MB
       Current Mode: 1440 x 900 (32 bit) (60Hz)
       Monitor Name: SyncMaster 943BW/ 943BWX /943BWT,SyncMaster Magic CX943BW (Digital)
      Monitor Model: SyncMaster
         Monitor Id: SAM0350
        Native Mode: 1440 x 900(p) (59.887Hz)
        Output Type: DVI
        Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0013.0142 (English)
     Driver Version: 8.17.13.142
        DDI Version: 10
       Driver Model: WDDM 1.1
Driver Attributes: Final Retail
   Driver Date/Size: 5/15/2012 06:48:00, 18044224 bytes
        WHQL Logo'd: Yes
    WHQL Date Stamp:
Device Identifier: {D7B71E3E-46AA-11CF-E073-35271FC2C535}
          Vendor ID: 0x10DE
          Device ID: 0x05EA
          SubSys ID: 0x073810DE
        Revision ID: 0x00A1
Driver Strong Name: oem9.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section005:8.17.13.142:pci\ven_10de&dev_05ea
     Rank Of Driver: 00E62001
        Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
   Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
       D3D9 Overlay: Supported
            DXVA-HD: Supported
       DDraw Status: Enabled
         D3D Status: Enabled
         AGP Status: Enabled
Sound Devices
            Description: Speakers (Sennheiser USB Headset)
Default Sound Playback: Yes
Default Voice Playback: Yes
            Hardware ID: USB\VID_1395&PID_0002&REV_0004&MI_00
        Manufacturer ID: 65535
             Product ID: 65535
                   Type: WDM
            Driver Name: USBAUDIO.sys
         Driver Version: 6.01.7601.17514 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 11/20/2010 06:43:52, 109696 bytes
            Other Files:
        Driver Provider: Microsoft
         HW Accel Level: Basic
              Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
            Description: Speakers (High Definition Audio Device)
Default Sound Playback: No
Default Voice Playback: No
            Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_102802F7&REV_1001
        Manufacturer ID: 1
             Product ID: 65535
                   Type: WDM
            Driver Name: HdAudio.sys
         Driver Version: 6.01.7601.17514 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 11/20/2010 06:44:23, 350208 bytes
            Other Files:
        Driver Provider: Microsoft
         HW Accel Level: Basic
              Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
            Description: Microphone (Sennheiser USB Headset)
Default Sound Capture: Yes
Default Voice Capture: Yes
            Driver Name: USBAUDIO.sys
         Driver Version: 6.01.7601.17514 (English)
      Driver Attributes: Final Retail
          Date and Size: 11/20/2010 06:43:52, 109696 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF
DirectInput Devices
      Device Name: Mouse
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a
      Device Name: Keyboard
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a
      Device Name: Sennheiser USB Headset
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x1395, 0x0002
        FF Driver: n/a
      Device Name: Razer BlackWidow
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x1532, 0x010E
        FF Driver: n/a
      Device Name: Razer BlackWidow
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x1532, 0x010E
        FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x3A37
| Matching Device ID: usb\root_hub
| Service: usbhub
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x1532, 0x0015
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ HID Keyboard Device
| Vendor/Product ID: 0x1532, 0x010E
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ HID-compliant mouse
| Vendor/Product ID: 0x1532, 0x0015
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
|
+ HID-compliant mouse
| Vendor/Product ID: 0x1532, 0x010E
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
Disk & DVD/CD-ROM Drives
      Drive: C:
Free Space: 246.4 GB
Total Space: 468.7 GB
File System: NTFS
      Model: ST3500418AS
      Drive: D:
      Model: PLDS DVD+-RW DH-24AAS
     Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
System Devices
     Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_3A3E&SUBSYS_02F71028&REV_00\3&11583659&0&D8
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A34
Device ID: PCI\VEN_8086&DEV_3A34&SUBSYS_02F71028&REV_00\3&11583659&0&E8
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub PCI Express Root Port 9 - 3410
Device ID: PCI\VEN_8086&DEV_3410&SUBSYS_02F71028&REV_13\3&11583659&0&48
   Driver: n/a
     Name: NVIDIA GeForce GTX 260
Device ID: PCI\VEN_10DE&DEV_05EA&SUBSYS_073810DE&REV_A1\4&101B7E8&0&0018
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Device ID: PCI\VEN_8086&DEV_3A3C&SUBSYS_02F71028&REV_00\3&11583659&0&D7
   Driver: n/a
     Name: Intel(R) 82801JDH SMBus Controller - 3A30 (Intel(R) SMBus 2.0 Driver)
Device ID: PCI\VEN_8086&DEV_3A30&SUBSYS_02F71028&REV_00\3&11583659&0&FB
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub PCI Express Root Port 7 - 340E
Device ID: PCI\VEN_8086&DEV_340E&SUBSYS_02F71028&REV_13\3&11583659&0&38
   Driver: n/a
     Name: Silicon Image SiI 3132 SATALink Controller
Device ID: PCI\VEN_1095&DEV_3132&SUBSYS_02F71028&REV_01\4&24931170&0&00E4
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Device ID: PCI\VEN_8086&DEV_3A3A&SUBSYS_02F71028&REV_00\3&11583659&0&EF
   Driver: n/a
     Name: Intel(R) ICH10R SATA AHCI Controller
Device ID: PCI\VEN_8086&DEV_3A22&SUBSYS_02F71028&REV_00\3&11583659&0&FA
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub PCI Express Root Port 3 - 340A
Device ID: PCI\VEN_8086&DEV_340A&SUBSYS_02F71028&REV_13\3&11583659&0&18
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A39
Device ID: PCI\VEN_8086&DEV_3A39&SUBSYS_02F71028&REV_00\3&11583659&0&D2
   Driver: n/a
     Name: Intel(R) ICH10R LPC Interface Controller - 3A16
Device ID: PCI\VEN_8086&DEV_3A16&SUBSYS_02F71028&REV_00\3&11583659&0&F8
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub PCI Express Root Port 1 - 3408
Device ID: PCI\VEN_8086&DEV_3408&SUBSYS_02F71028&REV_13\3&11583659&0&08
   Driver: n/a
     Name: Intel(R) ICH10 Family PCI Express Root Port 5 - 3A48
Device ID: PCI\VEN_8086&DEV_3A48&SUBSYS_02F71028&REV_00\3&11583659&0&E4
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A38
Device ID: PCI\VEN_8086&DEV_3A38&SUBSYS_02F71028&REV_00\3&11583659&0&D1
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub Throttle Registers - 3438
Device ID: PCI\VEN_8086&DEV_3438&SUBSYS_00000000&REV_13\3&11583659&0&A3
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub to ESI Port - 3405
Device ID: PCI\VEN_8086&DEV_3405&SUBSYS_02F71028&REV_13\3&11583659&0&00
   Driver: n/a
     Name: Intel(R) ICH10 Family PCI Express Root Port 4 - 3A46
Device ID: PCI\VEN_8086&DEV_3A46&SUBSYS_02F71028&REV_00\3&11583659&0&E3
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A37
Device ID: PCI\VEN_8086&DEV_3A37&SUBSYS_02F71028&REV_00\3&11583659&0&D0
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub System Management Registers - 342E
Device ID: PCI\VEN_8086&DEV_342E&SUBSYS_00000000&REV_13\3&11583659&0&A0
   Driver: n/a
     Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_02F71028&REV_90\3&11583659&0&F0
   Driver: n/a
     Name: Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
Device ID: PCI\VEN_8086&DEV_3A42&SUBSYS_02F71028&REV_00\3&11583659&0&E1
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A36
Device ID: PCI\VEN_8086&DEV_3A36&SUBSYS_02F71028&REV_00\3&11583659&0&EA
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub Control Status and RAS Registers - 3423
Device ID: PCI\VEN_8086&DEV_3423&SUBSYS_00000000&REV_13\3&11583659&0&A2
   Driver: n/a
     Name: Broadcom NetLink (TM) Gigabit Ethernet
Device ID: PCI\VEN_14E4&DEV_1698&SUBSYS_02F71028&REV_10\4&62990A5&0&00E1
   Driver: n/a
     Name: Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
Device ID: PCI\VEN_8086&DEV_3A40&SUBSYS_02F71028&REV_00\3&11583659&0&E0
   Driver: n/a
     Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A35
Device ID: PCI\VEN_8086&DEV_3A35&SUBSYS_02F71028&REV_00\3&11583659&0&E9
   Driver: n/a
     Name: Intel(R) 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers - 3422
Device ID: PCI\VEN_8086&DEV_3422&SUBSYS_00000000&REV_13\3&11583659&0&A1
   Driver: n/a
     Name: VIA 1394 OHCI Compliant Host Controller
Device ID: PCI\VEN_1106&DEV_3403&SUBSYS_02F71028&REV_00\4&342A71D0&0&00E3
   Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
LogMeIn Video Encoder,0x00200000,1,1,racodec.ax,
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
LogMeIn Video Decoder,0x00800000,1,1,racodec.ax,
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
LogMeIn Video Encoder,0x00200000,1,1,racodec.ax,
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
Fraps Video Decompressor,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
Xfire Video Codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
Audio Capture Sources:
Microphone (Sennheiser USB Head,0x00200000,0,0,qcap.dll,6.06.7601.17514
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
WDM Streaming Capture Devices:
Sennheiser USB Headset,0x00200000,3,2,ksproxy.ax,6.01.7601.17514
WDM Streaming Rendering Devices:
HD Audio HDMI out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
HD Audio Headphone/Speakers,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Sennheiser USB Headset,0x00200000,3,2,ksproxy.ax,6.01.7601.17514
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Audio Renderers:
Speakers (Sennheiser USB Headse,0x00200000,1,0,quartz.dll,6.06.7601.17713
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Speakers (Sennheiser USB Headset),0x00200000,1,0,quartz.dll,6.06.7601.17713
Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
    Enabled:
    Force throttling
    Allow half deinterlace
    Allow scaling
    Decode Power Usage: 100
Balanced Flags: 1424
    Enabled:
    Force throttling
    Allow batching
    Force half deinterlace
    Force scaling
    Decode Power Usage: 50
PowerFlags: 1424
    Enabled:
    Force throttling
    Allow batching
    Force half deinterlace
    Force scaling
    Decode Power Usage: 0

https://crash-stats.mozilla.com/report/index/bp-0a0b872f-5127-4ee1-a355-ca3cb2120721
https://crash-stats.mozilla.com/report/index/bp-9cd87dd7-205f-4844-9e6d-3ce262120721
https://crash-stats.mozilla.com/report/index/bp-8c07c846-b2ed-4535-8db4-4ee072120720
https://crash-stats.mozilla.com/report/index/bp-f29a89ed-f8b1-4a62-ba3e-983e22120720
https://crash-stats.mozilla.com/report/index/bp-e16d2b91-0f7d-4e5a-9e25-255852120718
https://crash-stats.mozilla.com/report/index/bp-1226c709-5f87-41c6-95d3-4310d2120718
https://crash-stats.mozilla.com/report/index/bp-4de2a0da-dd36-4ec8-8e53-c42742120714
https://crash-stats.mozilla.com/report/index/bp-e16d2b91-0f7d-4e5a-9e25-255852120718
https://crash-stats.mozilla.com/report/index/bp-4de2a0da-dd36-4ec8-8e53-c42742120714
https://crash-stats.mozilla.com/report/index/bp-eac1c5a5-2dce-4415-b645-07a1f2120714
https://crash-stats.mozilla.com/report/index/bp-1ede5bd3-8c72-4362-8d79-4f29c2120714
https://crash-stats.mozilla.com/report/index/bp-d4fd5dae-dacd-45f8-9549-2c3702120722
https://crash-stats.mozilla.com/report/index/bp-ca510991-de29-44b3-be02-0255a2120722
https://crash-stats.mozilla.com/report/index/bp-8600c221-3fd3-4eaa-a5af-a602b2120722
With Hardware Accelaration in Flash turned off. Still crashing.

"Adobe Setup has stopped working" problem with XP, not Vista

Adobe has posted a tech note to work around the "Adobe Setup has stopped working" for Vista:
http://kb2.adobe.com/cps/408/kb408524.html
However, I am having almost the same problem with Windows XP SP3. I have tried installing and updating using both an admin class user and the actual Administrator. At first I thought it might be related to Symantec EndPoint until I saw the Vista thread, but I get the same problems even with EndPoint not on the machine. The posted technote (which seems oddly written by the way.. mentioning junctions AND folders?!?) does not cover XP, only Vista. My attempts to translate it over to XP procedures does not get very far.
The install goes fine, but any subsequent updates for the suite fail. Once the failure occurs, InDesign and other apps will refuse to open. I can't even right-click a file in Windows Explorer or it also results in a crash (I am guessing to the CS Drive and Bridge additions to the contextual menu). The main apps that fail to update appear to be the same ones mentioned for Vista:
Adobe Drive and Services update (aka Version Cue client 4.0.1, Creative Suite Infrastructure 1.0.1)
Adobe Version Cue Server 4.0.1 update
Flash Lite 3.1 Update for Adobe Device Central CS4 (aka Device Central 2.1)
Adobe Output Module update for Adobe Bridge CS4 (aka Output Module 2.1)
Extensions Manager CS4 2.1
Screenshots of the errors are here:
http://drop.io/tlzrsif
Luckily we use drive images for our systems so I can hop back to a freshly prepped notebook with out much delay, but given the long CS4 install time this has become a pain to try to solve.
Have any others run into this problem using XP and not Vista?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

LiveCycle Workbench ES2 - "Java(TM) Platform SE binary has stopped working" Error

Hi,
I am getting this error when I try to create a new process o open an existing process.
"Java(TM) Platform SE binary has stopped working"
The only option is to click on a "Close" button and end the LC Workbench ES2 program.
Also, when I try to open an existing form, it displays 'garbage' - a screenfull of control unrecognizable characters - instead of the form itself.
When this error comes up, I also get a pop-up window with a list of log entries / errors (please see attached: Java Platform SE binary has stopped working.jpg)
Environment:
Windows Vista Ultimate running on HP Desktop (e9107c Intel CORE 2 Quad Processor withy 8 GB RAM, 750GB HDD)
Downloaded and installed the Trial Version of LiveCycle ES2 package (Windows JBoss version)
The LiveCycle ES2 server is installed properly and is working with the following services. Are there any missing services?
LiveCycle Output ES2, LiveCycle Rights Management ES2, LiveCycle PDF Generator ES2 Evaluation, LiveCycle Process Management ES2, LiveCycle Workspace ES2, Applications and Services, LiveCycle ContentServices ES2, LiveCycle Forms ES2
I already had Adobe Acrobat Pro Extended 9.2 and the associated LiveCycle Designer instaleld prior to installing the Trial of LC ES2.
Basesd on the installation insttructions, I deleted the Designer ES from my Acrobat Pro Extended and instaleld the LC Workbench ES2.
Now I don't see a seprate entry for the LC Designer ES2 anymore on my Start >> Programs.
And th newly installed LC Workbench is not working
Any help in making the workbench 'work' is greatly appreciated.
Are there any tests we can do to troubleshoot this?
Thanks.

Here is some additional information that may be helpful in identifying the cause for this problem.
Here is the Exact ERROR :
Java (TM) Platform SE binary has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
Button: "Close Program".
On clicking that button, the error window goes away; the main LC WB ES2 program also closes; but a long error window appears. The full screenshot was attached in my original message. The top few lines are reproduced below.
JVMterminated. Exit code=255
C:\Program Files (x86)\Adobe\AdobeLiveCycleWorkbench ES2\workbench\jre\javaw.exe
-Xms128m
-Xmx512m
-XX:PermSize=256m
-XX:MinHeapFreeRatio=40
========Here is teh cutrrent status ===================
Adobe LiveCycle Designer ES2 is working properly: Good
Adobe LiveCycle Workbench ES2 has ONE problem
1. Program Starts properly
2. I am able to login to the LCES2 server
3. I am able to Browse and select sample projects
4. I am ble to create an Application, a folder, and a Form
5. I am able to invoke the LC Designer ES2 from within Workbench (while creating a form)
6. I am able to "invoke" an existinmg sample process in a web browser (not within workbench environment)
The main problem is...
I am NOT able to create a new process or open existing process using workbench.
Since it gives Java Platform SE error, I checked the versions of various Java Run Time Environments on my pc.
Properties of javaw.exe in different folders:
1. My Computer's JRE (common to all apps)
Folder: Program Files\Java\jre6\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.170.4
2. Adobe LiveCycleWorkbench ES2
Folder: Program Files (x86)\Adobe\Adobe LiveCycleWorkbench ES2\jre\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.20.6
2.1 Adobe LiveCycleDesigner ES2
Folder: Program Files (x86)\Adobe\Adobe LiveCycleWorkbench ES2\LiveCycleDesigner ES2\jre\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.140.6
2.2 workbench
Folder: Program Files (x86)\Adobe\Adobe LiveCycleWorkbench ES2\workbench\jre\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.70.6
I tried to use the same versions of JRE in all these folders; that didn't work..
I hope someone can throw more light on this and find the real cause.
Thanks a lot in advance!

Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

I am experiancing this unbelieveably annoying and constant Flash error; Adobe Flash Player 11.4 r402 has stopped working.
But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer. So what's causing this?

There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.  If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
So, third party stuff aside, I'd like to know more about the crashes your seeing:
1.) Please provide links to the Firefox crash reports. If you have multiples, the first few would be great.
     In Firefox, type about:crashes in the address bar
     If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
     If not, click it to submit it, and copy the subsequent link.
2.) In firefox, type about:support
     Just copy and paste the output into the reply.
3.) In Firefox, type about:plugins
     Please copy and paste the output into the reply
4.) Please provide the output of the DirectX Diagnostic Utility
     Click Start > type "dxdiag" [enter]
     Click Save All Information
     Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful. My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
If you're not comfortable sharing that diagnostic information publicly, send me a private message. Just click my name and use the options on the right.
Thanks!

Kinect Configuration Verifier has stopped working

Hello Guys,
I'm trying to set up my Kinect v2 and I keep getting a crash with the KinectV2 Configuration Verifier. When I run the exe it instantly stops on the main screen.
I'm not able to click anything on that screen.
Shortly afterwards I get the following crash KinectV2ConfigurationVerifier.exe has stopped working.
Full log from the crash:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: KinectV2ConfigurationVerifier
Problem Signature 02: 2.0.1410.16000
Problem Signature 03: 5441126a
Problem Signature 04: System.Management
Problem Signature 05: 4.0.30319.33440
Problem Signature 06: 520042ce
Problem Signature 07: da
Problem Signature 08: 3f
Problem Signature 09: System.Management.Management
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2108
Additional Information 1: 5861
Additional Information 2: 5861822e1919d7c014bbb064c64908b2
Additional Information 3: a10f
Additional Information 4: a10ff7d2bb2516fdc753f9c34fc3b069
Any help would be greatly appreciated!
===============
Computer Specs:
Operating System: Windows 8.1 Pro 64-bit (6.3, Build 9600) (9600.winblue_r5.141029-1500)
System Manufacturer: MEDION
System Model: X681X
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (8 CPUs), ~1.7GHz
Memory: 4076MB RAM
Available OS Memory: 4076MB RAM

Thanks for your reply Carmine. There have been no other SDK installs or runtime updates recently. I have run a full uninstall of the SDK and the Verifier. Rebooted. Reinstalled the SDK. Rebooted. Reinstalled the verifier. Connected the Kinect then ran the
verifier resulting the the same crash. I debugged the crash and got the following output from VS2010:
============
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\KinectV2ConfigurationVerifier.exe'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework\v4.0_4.0.0.0__31bf3856ad364e35\PresentationFramework.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\WindowsBase\v4.0_4.0.0.0__31bf3856ad364e35\WindowsBase.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\PresentationCore\v4.0_4.0.0.0__31bf3856ad364e35\PresentationCore.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\en-US\KinectV2ConfigurationVerifier.resources.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework.Aero2\v4.0_4.0.0.0__31bf3856ad364e35\PresentationFramework.Aero2.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\Microsoft.WindowsAzure.Storage.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\UIAutomationTypes\v4.0_4.0.0.0__31bf3856ad364e35\UIAutomationTypes.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\EnumUSB.dll'
An unhandled exception of type 'System.Management.ManagementException' occurred in mscorlib.dll
Additional information: Invalid parameter
The program '[5616] KinectV2ConfigurationVerifier.exe: Managed (v4.0.30319)' has exited with code 0 (0x0).
===========
Also I have just check the driver for the Kinect and the "WDF KinectSensor Interface 0" driver has a yellow exclamation beside it. My Kinect does not seemed to be turned on. It's connected to a 3.0 usb slot but the usb slot doesn't have a super
speed symbol on it like the Kinect adapter does, could this cause problems?

Safari in Lion has stopped working.

Safari in Lion has stopped working. All my peers that have lion have been having this problem, and those that still have Snow Leopard have no issues with their Safari. The loading animation only gets to about as far as "http://" and just hangs there. It says it's connected to the internet (i've tried with both wi-fi and ethernet). I have no idea what happened, as it had been working for a solid month before this.
I'm sadly writing this message from the firefox browser .
In the past to get it to start working again (for a short period of time), i would:
Emtpy Cache in Safari
Reset Safari
Remove my Wi-Fi remembered internets
Delete Wi-fi
Reboot the computer
Re-add Wifi
Reconnect to the internet
it would still hang for a bit, but eventually it would load a page.
If anyone has any advise, it's much appreciated.
TroublesInToronto

Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are actually shell commands -- little programs. They’re harmless, but they must be used exactly as given in order to work. Some of the lines will probably wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Step 1
Launch the Terminal application, copy or drag -- do not type -- the line below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address will appear in the output of the above command. Change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

JTable.changeSelection() has stopped working for me in Java 1.5

The application I'm working on has a search function for a large table of data. In addition, you can restrict the search to a selected area of the table. This worked fine when compiled on Java 1.4, but has stopped working on Java 1.5. It appears the problem is with changeSelection not actually changing the selection to the cell that was found in the search.
I've been able to reproduce the problem with some small modifications to the SimpleTableSelectionDemo.java tutorial program. I've included the code below with my changes.
Basically all I did was modify the mouseListener so that instead of printing the table contents, it calls changeSelection to a fixed location (simulating the search going to a matching cell).
If I compile/run in 1.4, I can select a cell or region, right-click the mouse and see the specified cell selected. If I start typing the selected cell is edited.
If I compile/run in 1.5, when I right-click the selected cell is not changed (the second selected cell of the select region stays selected). If I start typing the wrong cell is edited.
Hopefully someone can tell me if this is a run-time bug, or a change in behavior (and what I need to do to get it working again in 1.5).
* SimpleTableSelectionDemo.java is a 1.4 application that requires no other files.
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JComponent;
import javax.swing.ListSelectionModel;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.ListSelectionListener;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
* SimpleTableSelectionDemo is just like SimpleTableDemo,
* except that it detects selections, printing information
* about the current selection to standard output.
public class SimpleTableSelectionDemo extends JPanel {
    private boolean DEBUG = true;
    private boolean ALLOW_COLUMN_SELECTION = true;
    private boolean ALLOW_ROW_SELECTION = true;
    public SimpleTableSelectionDemo() {
        super(new GridLayout(1,0));
        final String[] columnNames = {"First Name",
                                      "Last Name",
                                      "Sport",
                                      "# of Years",
                                      "Vegetarian"};
        final Object[][] data = {
            {"Mary", "Campione",
             "Snowboarding", new Integer(5), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new Integer(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Knitting", new Integer(2), new Boolean(false)},
            {"Sharon", "Zakhour",
             "Speed reading", new Integer(20), new Boolean(true)},
            {"Philip", "Milne",
             "Pool", new Integer(10), new Boolean(false)}
        final JTable table = new JTable(data, columnNames);
        table.setPreferredScrollableViewportSize(new Dimension(500, 70));
        table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
        if (ALLOW_ROW_SELECTION) { // true by default
            ListSelectionModel rowSM = table.getSelectionModel();
            rowSM.addListSelectionListener(new ListSelectionListener() {
                public void valueChanged(ListSelectionEvent e) {
                    //Ignore extra messages.
                    if (e.getValueIsAdjusting()) return;
                    ListSelectionModel lsm = (ListSelectionModel)e.getSource();
                    if (lsm.isSelectionEmpty()) {
                        System.out.println("No rows are selected.");
                    } else {
                        int selectedRow = lsm.getMinSelectionIndex();
                        System.out.println("Row " + selectedRow
                                           + " is now selected.");
        } else {
            table.setRowSelectionAllowed(false);
        if (ALLOW_COLUMN_SELECTION) { // false by default
            if (ALLOW_ROW_SELECTION) {
                //We allow both row and column selection, which
                //implies that we *really* want to allow individual
                //cell selection.
                table.setCellSelectionEnabled(true);
            table.setColumnSelectionAllowed(true);
            ListSelectionModel colSM =
                table.getColumnModel().getSelectionModel();
            colSM.addListSelectionListener(new ListSelectionListener() {
                public void valueChanged(ListSelectionEvent e) {
                    //Ignore extra messages.
                    if (e.getValueIsAdjusting()) return;
                    ListSelectionModel lsm = (ListSelectionModel)e.getSource();
                    if (lsm.isSelectionEmpty()) {
                        System.out.println("No columns are selected.");
                    } else {
                        int selectedCol = lsm.getMinSelectionIndex();
                        System.out.println("Column " + selectedCol
                                           + " is now selected.");
        if (DEBUG) {
            table.addMouseListener(new MouseAdapter() {
                public void mouseClicked(MouseEvent e) {
//                  printDebugData(table);
// ==============================================
// Changed to do a changeSelection() on a right-click
// without clearing any existing selected area.
                    if (e.getButton() == MouseEvent.BUTTON3) {
                        System.out.println("mouse clicked");
                        table.changeSelection(2, 3, true, true);
// ==============================================
        //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
        //Add the scroll pane to this panel.
        add(scrollPane);
    private void printDebugData(JTable table) {
        int numRows = table.getRowCount();
        int numCols = table.getColumnCount();
        javax.swing.table.TableModel model = table.getModel();
        System.out.println("Value of data: ");
        for (int i=0; i < numRows; i++) {
            System.out.print("    row " + i + ":");
            for (int j=0; j < numCols; j++) {
                System.out.print(" " + model.getValueAt(i, j));
            System.out.println();
        System.out.println("--------------------------");
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("SimpleTableSelectionDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        SimpleTableSelectionDemo newContentPane = new SimpleTableSelectionDemo();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

Running on Mac OS X 10.4.3
java version "1.5.0_02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_02-56)
Java HotSpot(TM) Client VM (build 1.5.0_02-36, mixed mode, sharing)
The same problem occurs here.

Sqr.exe has stopped working

Hi Experts,
I came across sqr.exe has stopped working error message while executing sqr programs through command line as well as production reporting studio,
For some of the programs No such error,and for some programs its complaining above error after producing output.
Could anybody help me in resolving this error.
Installed epm 11.1.2.3 in windows server 2008 64 bit and using SQL Server 2008 database.
Thanks,
Aravind

found the reason for app crash. Its due to command "USE database_name" in the begin-setup section. I dont know why its causing issue .It si supposed to work for Sybase and SQL Server database but not working with SQL Server. Anyways I have commented that and made it work.

Google maps has stopped working in Safari

Within the last week, Google Maps has stopped working in Safari 6.1.1. It previously worked fine. The page starts to load, and then hangs. It displays the small rectangle that says "loading...". I have tried deleting Safari preferences. This had no effect. Any suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Natan turbo hadar,
I have the same exact problem.
I put an iPod shuffle on the Bose system, it plays just fine.
My iPhone 4s works just fine connected to my car stereo.
My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
So it's not the Bose, it's not connections, it's the iOS 7.1.1
Everything worked fine before, any one else have suggestions?

Stereo output has stopped working?!

Similar Messages

Maybe you are looking for