Stereo sound from all speake

Hii, I have a X-Fi Xtreme music and a 5. speaker setup, can someone tell me how can I get stereo sound from all of my speakers? thanks in advance.

Hmmm, I don't have an X-Fi, but to answer your question the first thing someone needs to know is how you have your speakers connected. If, for example, you're running throgh a receiver you need to separately output each channel (using 3.5mm mini plug to RCA cables/converters you would buy at Radio Shack) to the external decoder of your receiver. Of course, in that insance, you would output the DD source stream from the optical out of the card through the optical in of the receiver; stereo playback would be from a 2. signal. I run both configs on mine. Now, if you're running computer speakers already plugged into the correct outputs of the sound card that's a different question, and it's one I can only relate from my experience with the Audigy 2 software.

Similar Messages

No sound from center speaker

hello all,i have a inspire 5.1 5200 speaker system. i am getting sound from all speakers except center speaker. the speaker itself is working because i connected it to the right fromt location and got sound out of the speaker. any help with this matter would be greatly appreciated.

You're not the only one;
see the post http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=9489
I hope it helps, or at least comforts you in knowing that at least the speakerset can be in order...

No sound from right speaker on Pavilion g6-1353ea after installing Windows 8

I've had no sound from right speaker on my HP Pavilion g6-1353ea after installing Windows 8. I've checked all drivers, and have done the sound test in sound properties (left speaker beeps fine, but then nothing from the right). Anyone else having this problem/found a solution?!

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio in both speakers.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT1766 no sound from my speaker, headphones play normal, phone rings normal, alarm sound normal, re-installed software, will not play sound when music is played from speaker but speaker works for everything else....

No sound from my speaker iphone 4S, headphones play normal, phone rings normal, alarm sound normal, re-installed software, will not play sound when music is played from speaker but speaker works for everything else....(phone ring and alarm)... no notification sound for text messages......
I checked all settings..... good...
confused???
please advise,

it's a hardware issue read more about it here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more hits
https://www.google.dk/search?client=opera&q=4:3&sourceid=opera&ie=utf-8&oe=utf-8 &channel=suggest#client=opera&hs=UGk&channel=suggest&sclient=psy-ab&q=iphone+stu ck+in+headphone+mode&oq=iphone+stuc&gs_l=serp.3.3.0l4.412779.418971.0.420896.16. 9.2.5.5.0.86.545.9.9.0...0.0...1c.1.9.psy-ab.HHtp6aEcO5U&pbx=1&bav=on.2,or.r_cp. r_qf.&bvm=bv.45175338,d.bGE&fp=43d9a4347e8aaeda&biw=1535&bih=773

Sound from the speaker iPhone 4S 5.1.1. disappeared!?

About one hour ago I lost the sound from the speaker iPhone 4S 5.1.1. Lost in the middle of a conversation with a friend whom I put on speakerfon, first started to choking and after that sound is disappeared, and than appears in the fraction of a second and after is completely gone. On two occasions it choking when I put some videos and that's all. There is no sound even when someone call me, only vibrates. Note that phone was never dropped, as a new one, and I got it from July last year. Headphones works normaly. Any help without service?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
More Info Here > http://support.apple.com/kb/TS2802

FAINT sound from Side Speak

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

I am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones

i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones

You have your mute button on. In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side. If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad. If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear. Swipe your finger to the right until the Mute icon appears on the left side. Touch it and you will unmute system sounds.

TS1630 Hi I have a problem with my iPhone 4S, I have no sound from my speaker ,keyboard or notifications , and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
Thanks

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

No Sound From Center Speaker [Win 7]

$No Sound From Center Speaker [Win 7]? Hi,
I downloaded the Darkest of Days demo and noticed that the speech volume was very low if i positioned it center of the camera. But if i positioned it on the left or right of the camera, the speech volume would increase. I found it strange.
I closed the game. And ran my speakers through window's speaker test. Every speaker responded with a sound. Unconvinced, i opened a few songs. That's when i noticed the center speaker wasn't producing a sound. Even on 5. content (movies & music) the center speaker wouldn't work.
**bleep**, no wonder those AC3 movies had low speech and i had to manually boost the speech volume. I noticed the low sound in games before too...but i attributed it to the 5. surround thing. Guess i was wrong!
System Rig:
Intel Core 2 Duo E6400 @3.2Ghz
Gigabyte P965-DS3
[color="DarkOrange">ATi HD4850
Twinmos 3xGB DDR2 800Mhz + GB OCZ 800 MHz
Zalman 9700
Creative Audigy2 ZS
Creative Fatalty Gaming Headset
250GB Seagate SATA-II 7200.0 8MB
Enermax 535W PSU
Logitech X-540 5. Speakers.

Hi
Can you clarify that are getting the voice when you play the DVDs/CDs?If you are not getting the voice and you are getting the sounds only? Then there could be some connectivity issue for Center Speaker.Pl check the connections .. Regds Balu

LIVE 5.1 - NO SOUND FROM CENTRE SPEAKER - WIRES

NO SOUND FROM CENTRE SPEAKER ?WIRES & PLUGS SEEM OK !ANY IDEAS

plus I have switched around speakers & wires, so its not a speaker problemit must be the centre output ?could it be a hardware fault or software related

No sound from the speaker and missing speaker device listed with Window 7

I have Window 7 and with SB X-Fi card installed for a long time now but yesterday, there is no sound from the speaker which connected to the normal speaker output of the card. I check the output device and the specker device is missing. I tried to run the software but it says no device.
How do I correct the problem?
Thank you.

Take it to your local Apple Store along with US$149 for a replacement.

No sound from left speaker headphone out

Suddenly no sound coming from left speaker through headphone output only. Records in stereo plays in stereo but no sound on left. Tried all the usual suspects ....no luck. Any suggestions

Nowhere near enough information to go on, really. If this is a switched socket and the speaker works when it's not connected, then there's either a socket fault or a headphone fault. Try it with another pair of headphones and see if it still happens. If it doesn't, you have faulty headphones. If it does, then you have some sort of a wiring or socket fault.

Poor sound from left speaker hs-1200

My headphones were working fine until yesterday. Now even in the test the sound is fine from the right headphone speaker but seems very faint from the left speaker. I have a vista ultimate system, have tried all available usb ports, reinstalled the drivers and confirmed my external speakers do pick up stereo sound fine. Ive checked the balance and both are equal. Any suggestions?Message Edited by elasalle on 02-11-2009 05:30 AM

RMA would help e-mail cerative

4.1 Speaker Setup - No sound from rear speak

Opsys: Windows 2000 (just installed)
Card: Audigy 2 ZS Platinum
Software: Installed full sets of Creative software, everything runs
I'm trying to set up a 4. system where I'm using 2 set sets of stereo speakers plugged into line outs # and #2.
The problem is that I get sound only from line out #. All attempts at plugging the second set of speakers into the other line outs doesn't do anything for sound. I have switched the 2 sets around and they both work from lineout #.
The speaker calibration program only works for the front left and right speaker (i.e. no rear speaker output). I have tried more than just the 4. option, but none of them produce any sound to the rear speakers.
I have enabled EAX and CMSS, but this hasn't done any good. Still no sound from the rear speakers.
I checked the speaker set up and the volumes are midway for all speakers, both front and back.
Soooo. My guess is driver problems or maybe the 2 way stereo plug doesn't work with the 3 way plugs of line out #2 and #3.
Any ideas?
Rick

Okay, I get the stupid award for this one. I didn't notice that I was plugging my rear speakers into to the mic instead of the lineout 2. Well, in my defense, they are symetrically located around lineout and they do fit.
I would suggest people with sound issues to look at the other utilities. The one that helped was the Thx Setup console. This displays all info about the speakers, analog/digital settings, and even a picture showing the card plugs (that got the noodle thinking).
Also the Surround Mixer showed the correct configuration of the 4 speakers but without a sub hooked up. This fits my 2 stereo connections exactly.
Cheers.

Inaudible sound from rear speak

hi,
i recently brought a soundblaster li've 24 bit sound card , and creative inspire 5. speakers. When i try to play dvds on powerdvd with prologic on, on power dvd software i can hardly hear any sound at all from my rear speakers. And also please explain what is the difference between software decoder prologic on power dvd and the hardware decoder ddts-00. will the surround quality be better on the ddts 00 decoder

NOOOO, wait. If you enable CMSS, you will get the same STEREO signal to all speakers. You will not get 5.. CMSS is for a 2 channel stereo signal to be sent to all speakers. Its mainly for music and not 5. DVDs.
EG: If you have a Divx movie which is 2 channel then you can turn on CMSS to get all speakers working, but this is not 5..
What you need to do is dissable CMSS.
Make sure everything is set to 5. also in windows control panel.
Now with WMP 0 you then need to go into the options for sound and also set it up to use 6 channels. This is 5..
You can also get WIN DVD as it will give you 5.
The best way to know what is going on is do this.
Play a movie with CMSS on, like you have it.
Now while playing the movie open up media CC. and then go to Surround mixer. Now go to advance and play with the sliders for all speakers. Lower the centre one to Zero. You will still hear vocals, This is not right. Lower the front and centre speakers and you will still hear all sound FX. This is not 5. my freind. Try it for your self and then you will see what I mean..

Stereo sound from all speake

Similar Messages

Maybe you are looking for