Stereo track is only showing audio in left channel in multitrack view

I have an echo Layla 3g soundcard. Whenever I place a mic into the front input and try to record into AA, I can get a stereo recording BUT with audio only on the left channel. However, if I record using the edit view, I can get both channels (L and R) recordings ok (this is from the same mic input from the echo layla. I have selected the correct drivers in the audio hardware set up. Anybody else having this same problem?
Quad core
Windows 7
4 gig RAM

With both Edit and Multitrack views, you get options to select what's going to happen in terms of recording behaviour, and they don't have to be set the same way.
With any input, you get options that typically say [01S] (stereo) or [01M] (mono). In Multitrack view,if you select a stereo input, but only plug a mic into one input, then any recording you make will only be on the channel that the input is connected to, and not the other one. If you select a mono input, then all you will do is patch that particular input to a mono recorded channel if you record in mono.
In Edit view it's slightly different. If you select a mono input, but then elect to make a stereo recording, that mono input will be patched across both mono channels.
If you only have one microphone to plug in, there's absolutely no point in making stereo, or dual mono recordings anyway. All you are doing is doubling up on the same information.

Similar Messages

Only have left 1.5memory in my iPhone 4 ... most is taken by "other" what's in it? ... it only shows audio-photos-apps-other

only have left 1.5memory in my iPhone 4 ... most is taken by "other" what's in it? ... it only shows audio-photos-apps-other

A lot of other indicates corrupt files.
A restore should resolve.

Airport Express only outputs sounds through left channel

Recently purchased a new airport express.
Sound is only audible through the left channel. Sound through the right channel is barely audible even at max volume (speakers and iTunes).
Speakers are fine (they work fine through the stereo, iPod earphones also only work through left channel).
If I turn sound enhance on and up to high, I can finally hear through the right channel, but only at about 40-50% of the left.
Is this a software issue, or bad hardware?
I've hard reset the airport express multiple times. Same issue whether wirelessly or connected via ethernet. This is running from iTunes 7 for Windows using a Linksys router.
Windows XP Pro

Doesn't sound promising for the AX. Since it was
recently purchased, do you have the option to visit
your local Apple Store to either return it for
replacement or, at least, have them verify the
problem?
The reason why I thought it might be software related was due to this effect of changing the sound enhancer, i.e by turning the sound enhancer on and setting it to high there was a considerable increase in sound output. If there was a loose connection somewhere I don't think I'd expect this behavior. It's almost as if the balance has been set all the way to the right.
Given that no-one seems to have seen this problem before (other than a unresolved single old post on the Airport Express board), it does seem that you're right and the AX needs replacing.

Dv6000t no speaker audio, low left channel on headphones

HP Pavillion dv6000t, running Vista
Out of the blue, I recently lost speaker audio entirely, and the headphone jack now only gives me the left channel, at a very very low barely audible volume. Bizarre...
I've updated the BIOS, did all the Windows updates, etc., tried 12 different Conexant HD audio drivers, nothing works. No change. I'm thinking hardware issue at this point?
I don't want to trash this laptop but I need the speakers to be working!
Help and new suggestions welcome!

Somebody? Anybody? Not even a hint?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

Can I copy right-channel only content to the left channel?

Thank you

Peter R. wrote:
Can I copy right-channel only content to the left channel?
no. what are you trying to accomplish?

Stereo audio in left channel only.

Hi,
I have a strange problem with one of my projects.
I have created a large number of "talking head" videos/projects. I export them to FLV using one of PREs default settings. For just one of these projects I get audio in the left channel only. All other clips are OK.
When I play the clips on the timeline the audio is perfect in both channels. So somewhere in the rendering/output process I loose the right channel.
What am I missing here?
Thanks in advance.

Hi and thanks for all input.
Yes I use a mono mic, but the camera puts the sound on both channels.
When I play the timeline I hear the voice in both channels.
The timeline audio track shows waveforms on both channels.
Here is a pic of the timeline:
The project is corrupt somehow. I just tried creating a new project with the same video files and made a short flv out of it and it comes out OK.
I will try to redo this one which leads me to another question which I will post in another thread if not already answered.
Thanks for your input.

IPod videos now only show audio

I have an IPod 80 gig video (Black) and for some strange reason my videos are now audio. If I were to play them via ITunes they'll show as video, but on the IPod it only plays audio.
Even more odd, if I were to do a search on XP for .mp4 files it no longer shows as available, yet I can manually open the folders and play them. Is there anyway to restore it back? Thanks for any help.

To update I still have the files, but now they're on my audio playlists. Earlier I had accidentally unhidden the files and think this may be the cause.
On the IPod Summary it's showing as "Other" (And missing from Movies/TV) but if I go into the playlists the files are there

Clips only show audio in PE9, but run fine in Organizer

In PE 9 the preview of my clips only show the wave of the audio.
I have reinstalled PE9 but it makes no difference. Startup is incredibly slow, it easily takes 10 minutes for a project to open..
I have tried to delete the prefs file at appdata\roaming\adobe\prem elements\9.0\Premiere elements prefs but it makes no difference (is this the right file? it has no extension).
On the net there is a tip to click ctrl-alt-shift and then click to start up PE, whioch then supposedly gives you an option to delete the prefs, but I dont think anything happens.
Extra strange is that it all used to work all right, suddenly the clips were audio only. I cannot pipoint a change on my system that could the the cause.It happened after I worked a lot in Organizer.
BTW My program is on C, the data are on D.
Does Organizer treat clips differently then PE itself?
Thanks

My Event Log gives the following event linked to the refusal of Organizer to start:
Log Name:
Application
Source:
Application Error
Date:
12-3-2015 22:02:21
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
VENOM3
Description:
Faulting application name: PhotoshopElementsOrganizer.exe, version: 9.0.0.0, time stamp: 0x4ca3a3b5
Faulting module name: PhotoshopElementsOrganizer.exe, version: 9.0.0.0, time stamp: 0x4ca3a3b5
Exception code: 0xc0000005
Fault offset: 0x0018f549
Faulting process id: 0x1300
Faulting application start time: 0x01d05d07d222ed55
Faulting application path: C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe
Faulting module path: C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe
Report Id: 129a40d6-c8fb-11e4-b37e-20cf30f2fd34
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-12T21:02:21.000000000Z" />
<EventRecordID>127857</EventRecordID>
<Channel>Application</Channel>
<Computer>VENOM3</Computer>
<Security />
</System>
<EventData>
<Data>PhotoshopElementsOrganizer.exe</Data>
<Data>9.0.0.0</Data>
<Data>4ca3a3b5</Data>
<Data>PhotoshopElementsOrganizer.exe</Data>
<Data>9.0.0.0</Data>
<Data>4ca3a3b5</Data>
<Data>c0000005</Data>
<Data>0018f549</Data>
<Data>1300</Data>
<Data>01d05d07d222ed55</Data>
<Data>C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe</Data>
<Data>C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe</Data>
<Data>129a40d6-c8fb-11e4-b37e-20cf30f2fd34</Data>
</EventData>
</Event>

Mic only seems to record / playback audio in LEFT channel/speaker

when i record videos / audio with my phone, online playback only comes from the LEFT speaker.
ie:
http://www.facebook.com/video/video.php?v=427597527682&ref=mf
this has occurred with every video.
anyone else having this?

i'm not talking about on the phone itself.
if i import the audio from something i record, it's only the left channel. not the split mono, as it should be,

Only hear audio in left earphone

I only hear audio in my left headphone. At first, i thought it was the headphones i was using and changed them, but i am still having the problem. I have to push and maneuver the headphones to hear sound in both ears, but the longer i push it the harder i have to push it. I was wondering if anyone else had this problem and knew of a way to fix it.
Thanks!

I just had my iPod repaired for this problem on Friday. For months, I only had audio coming out of the right headphone.
I e-mailed the support center (I did not go through Apple as I got a better price from an independent supplier in Toronto) and without even looking at it, they told me that the headphone jack was shot.
So, I took it in, and they fixed it right away. When the associate came out with my fixed iPod, I got my headphones out of my purse and went to test it out... and she immediately said "THAT's your problem," pointing at my headphones. I said, "What's my problem?" She took my non-Apple headphones and held up the plug alongside her Apple earbuds... the plugs on non-Apple headphones are ever so slightly longer than Apple earbuds and she said that that's the main reason why headphone jacks give out - because non-Apple headphones are too long and they push it out of place.
You can send it in to Apple to get it fixed, but it'll cost you. My advice is to find an independent service provider and send it in or take it in. It cost me $50 to get mine fixed, and she did it in about ten minutes while I waited.
... and then find some different headphones.

CAPTURE AUDIO MIXES LEFT CHANNEL TO MONO

Everytime I capture now, or batch, or capture a single logged clip, the stereo audio comes in as mono, using only the left channel. The right channel audio is lost.
I searched the postings, and found this was happening with a lot of people, not just FCP 5.1 HD, but with FCE, too. No resolution or fix as far as I could see.
Anyone know how to correct this major bug? I really need stereo audio!
Thanks,
Norris

After a lot of research, and NO help from calling Apple tech support, I finally determined this (which has to do with HD/1080i/60 only -- I am not sure about NTSC settings):
In the Clip Settings tab, in "Log and Capture" (in HD) there is a little box next to the simulated VU audio levels meters. Click that box. It should toggle on/off two little lines that combine audio channel 1 and audio channel 2. When the little lines are there, that is STEREO. WHen they are not, in my FCP 5, it mixes both tracks to mono from channel 2 (Left).
As for your other question -- yes, you can manually go into the logs and change the settings, and then recapture.
a pain this is, huh? And no written mention of it in any manual.
NOW - as for previewing the audio while logging and capturing? I still cannot do that and have been waiting two (2) weeks for a reply from an Apple tech support guy who was supposed to be researching this for me.

Soundcheck lowers audio in left channel.

So if you have soundcheck on it lowers the audio in the left channel in most tunes. I don't know why it would do this, you'd think it would be a bit more even of a distribution but it's heavy on the left channel. The only reason I have soundcheck on is I have various mp3s from widely different sources, and it can be annoying to be suddenly blast by a particually loud tune, and then barely hear the next one.
Soundcheck is too lopsided for me to use. Any solution besides soundcheck? Would MP3 Rage do the trick?

You can Reset the iPod, by pressing Menu and Center button simutaneously for about 10 secs till the Apple logo comes ON, then release it.
If this doesn't work, then the left channel audio electronics is leaking, which mean bringing it in to Apple Genius Bar or a 3rd party service center, if it is out of warranty.

Events over multiple days only show on the first day in 'Month' view

Hi,
I've noticed that if I create an event that spans over two days (for example 23 May 2008 at 6 PM to 24 May 2008 at 1 PM) are only displayed on the from date in Month view.
This is unfortunate because if I look at my calendar in Month view, I think I'm free on the 24th, when in fact I'm busy until 1 PM.
Is there a way to get the Month view to display an entry for the event on both days (other than creating one event running from 23 May 2008 at 6 PM to 11:59 PM and a second from 24 May 2008 at 1:01 AM to 1 PM)?
Message was edited by: Sam Watterson

Hi Sam
I just had the exact same problem the other day. I was asked to make an appointment with someone, I checked my calendar (actually on my iPhone) and I looked available that day so agreed and even entered the event. Turns out I will be working 70 miles away on the event I entered on the day prior. I've had the embarrassment of having to reschedule - makes me look disorganised.
The month view on iPhone is just the same as iCal - if it's not an 'all day' event it only shows on the first day. This is poor. I recall even outlook and windows mobile calendar manages to display this sensibly. Apple should be fixing this pronto.

No audio from left channel on my iphone 4

All of a sudden, I have no sound from the left channel. I tried several different headphones and my stereo and car - no sound at all from the channel. Please help!!

Did you check to see if it was muted?
Be a Shepard and not an iSheep.

Stereo track is only showing audio in left channel in multitrack view

Similar Messages

Maybe you are looking for