Stereo turntable PS-LX300USB not recognized by Win 7?

Bought turntable with Sound Stage 9 to transfer vinyl back in 2009. Used only briefly on my PC and put away until now 2013. Seems, HP computer with Win 7 is not recognizing turntable on plugging in USB. You can hear the "ding" but no device is recognized. Thoughts?

Please make sure that the computer is set to USB Audio codec. Try the following steps:
Click [Start] and then click [Control Panel].
In the Control Panel window, click [Hardware and Sound];
Click on [Sound];
In the [Sound] window, click on the [Recording] tab.
Select [USB Audio Codec] from the list (If this is not visible, please try these steps)
Double-click on [USB Audio Codec];
Click the [Levels] tab.
Set the microphone level to [100 percent];
Click OK;
Click OK once more.
After performing these steps, please check if you can start recording using the Sound Forge Audio Studio software.
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

My Ipad works very well by itself but it's not recognized by Win 7 and Itunes on my PC and my PC's wife.

My Ipad works very well by itself but it's not recognized by Win 7 neither Itunes of my PC and my PC's wife.
The Ipad of my wife is well recognized on my PC which means my PC is OK.
I restored everything of my IPAD but when I connected it to Itunes of my PC nothing happened.
What does that mean and what to do ?

See if this link helps: http://www.apple.com/support/ipad/assistant/itunes/

My first gen ipod nano is not recognized by win or itunes. Plz help me!!!

After i plug my ipod it appears on my computer after 10 min as removable disk not labeled as (ipod drive H) and i am not able to access it, when i try the comp get frozen for some time and then i get alert that i should insert disk into drive H. When I open itunes it is frozen most of the time and when it's not it doesn't recognize the ipod, the updater doesn't recognize it either. Ipod worked properly for a month or so and then my comp get restarted while ipod was connected to him and then this problem started. I tried everything i found here in support section several times and still it doesn't work!!! Plz help me!!!

Hello Caitlin,
I'd suggest taking a look through the following article for a whole host of useful troubleshooting steps that can help get your iPods to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

My external USB drive is not recognized by Win XP

Hi!
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Thanks for any help!
/ Anders

Hi Anders and welcome to Discussions,
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Yes it will !!
Although with the BootCamp 3.0 Drivers (from the OSX Snow Leopard DVD) and the 3.1 Driver update (downloadable) Apple has introduced read-access to HFS+ partitions from Windows this feature seems to have some serious problems for some people.
Personally I see this feature as "experimental" at the moment.
XP itself knows nothing and therefor can not use/see HFS+ partitions and GPT (GUID partition table) harddisks.
You might wanna have a look (or buy) at MacDrive http://www.mediafour.com/products/macdrive/ which right now is the better solution.
Thanks for any help!
/ Anders
Hope it helps
Stefan

Tried everything i can find, ipod nano not recognized by win explorer or itunes.

ipod nano not showing in windows explorer or itunes. tried every fix i can find, still won't connect. It will connect to another computer, but don't want try a factory restore, it may not work and i lose all my music.

Hey pepperfromnl,
Welcome to Apple Support Communities! I'd take a look at this article:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
It'll guide you through troubleshooting steps to resolve the issue and get your computer to recognize the iPod nano again.
Best,
David

Car stereo (clarion vz401) sometimes not recognizing ipod 6th generation. it says unsupported usb?

I have a brand new 6th gen ipod nano. when i connect it to my car stereo (which says it supports 6th gen) most of the time it will say unsupported usb. after a long time it will eventually connect and work fine. this happens every day. any ideas?

The iphone and ipod are not the same device.
Perhaps your car stereo supports ipod and not iphone. Check with the manufacturer of your car stereo.

Ipod shuffle not recognized by win vista

Hi,
I just gave my sister my old ipod shuffle because i bought the iphone.
however when she tries to sync the ipod, when she connects the ipod to the laptop itunes won't recognize the ipod and it does not show up under devices
what do I do to fix this
thank you

I'm having the same trouble with XP. I have a shuttle and my daughter has the new NANO, both bought at christmas, both have been working but now come up as not recognised. Have tried all suggestions in the support section but nothing has worked.

Wired Apple Keyboard not recognized in Win 7 64x bootcamp partition

I installed a bootcamp partition on an iMac late 2012 i5 running 10.8.3 following the Bootcamp instructions. Windows 7 64x installed fine. My wireless Apple keyboard and magic mouse work fine. However, when I plug in my previous Apple wired keyboard from my 2008 iMac, Windows doesn't recognize it, keyboard doesn't work, and the USB ports on the keyboard don't work. Called Apple support and they said to call Microsoft. MS said they didn't have an answer. Anyone else have this issue and any success resolving it? Would really prefer to use the wired keyboard for gaming and the numeric keypad.

Sorry - also meant to say that I had Win 7 x32 installed in a bootcamp partition on my previous 2008 C2D iMac and the wired keyboard worked fine.

KT3 Ultra2 onboard audio not recognized by win 98SE

I have a KT3 Ultra2 MB with the onboard audio enabled in BIOS and running Win98SE. I installed the drivers from the driver disk and followed all the prompts from windows. The device is listed under system and multimedia devices. But windows itself does not recognize that the device exists for playing sounds, recording et al. Multimedia properties says there is no playback device. Sound recorder sees no device. Volume control does not come up at all. The MSI sound manager will not open at all. I downloaded the latest drivers from the website, but there are no instructions as to how to install them, they just expand into a collection of files with no readme.
Silent in Texas

Reintalling Win98se certainly didn't do the trick for me. I've spent two days installing, trying a few changes, re-installing, trying something else, reinstalling. I even tried removing all my cards except the video but the problem was identical every try.
Can you think of anything special you did during or after the re-install that did the trick? Do you remember versions that you were using and where you got them? This may be a case of the latest drivers being worse than some earlier ones, or some combination of older chipset, newer audio or something crazy.
Speaking of the failed POST, I had a thing with a different MSI board a while ago, where it wouldn't hold the BIOS settings. Every so often (if it was unplugged for a few hours) it would reset (as if the RTC Reset had been jumpered and the checksum was off). If your video card was AGP, and the BIOS reset itself to "primary video = PCI" it might look like nothing was happening on boot up.
I admit that I am about ready to pitch this board too, (or try to return it at least).

My daughters iPod touch (4th gen and 4 months old) is not recognized by iTunes (PC) or our stereo docking station, but it will charge. Other devices (iPhone and another touch) work fine on PC and stereo. What is wrong??

We have an iPod touch 4th generation (4 months old) that is charging on our PC but is not recognized by iTunes. It is also charging on the docking station of our stereo but is not recognized by the stereo (will not play music). Other devices (2 other iPod touches and an iPhone) are recognized by both the PC and the stereo. What could be wrong with this particular iPod touch??

What are the model iPods and iPhone and iOSs that work?
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple l
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
The following may result in in the inability to regain full use of the iPod if iTunes does not see the iPod
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

USB Device Not Recognized (IPod Touch 5g) (Win 7 64 Bit)

I have seen many threads for this but nothing that they suggest has fixed this for me.
http://i165.photobucket.com/albums/u45/JediJake2429/Capture_zps9d26bcea.png
I have an I touch 5g Model MD724LL/A, IOS 7.1.1
I have two Win 7 64 Bit Machines.
I tried two cables,
I tried two computers,
I have restored it,
I have put it into recovery mode,
I have uninstalled all apple software, and removed all traces from the registry,
I have done a fresh install of Itunes on the laptop which had never had it on there before,
I have ran the windows troubleshooter, and the Microsoft fix it troubleshooter,
I have removed all traces of the ipod driver and tried updating,
I have updated the driver from the itunes folder on my pc,
I have tried everything listed here: My iTouch 5th generation is not recognised by my computer. why?
I have tried everything listed here: Windows 7 blocks my iPod Touch
I have tried everything listed here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/ipod-touch-5 th-generation-not-recognized/85dac803-680e-4ce8-842c-9f58b0df7f7f
My wife even took it to the apple store today and they told me that it is a windows 7 issue. they basically would not do anything for her.
Funny thing is, after trying everything that was suggested to me online, by those at the apple store, and using my own PC knowledge as I also work in IT, it still does not recognize the driver. So it seems to me that Apple need to get their drivers updated to be compatible.
I currently have a $400 piece of crap Ipod that I cannot use because apple cannot make a driver that works.
Anybody that has anything new to suggest, be my guest.

Illaass,
It works connected to another apple device. I have TWO windows 7 64 Bit Machines both with widely different configurations, and they both have the same exact issue. This IS a driver issue, that much I agree with apple on. However its not a WINDOWS issue. APPLE makes the driver that is installed with Itunes. That Driver does not work. (As a side note, Apple really should get their head out of their A$$ and come up with better solutions vs telling their customers to restore their windows config. That's straight up BS.)
JEM24,
I have done that. I have also taken a PC that had never had any apple software on it and installed itunes on that. Tested, same result.

Hi my computer(win XP) not recognizing my iphone 4G but other iphones the same comuter recognizing

Hi
My computer(win XP) not recognizing my iphone 4 and i am unable to connect to itune but the same comuter recognizing other iphone devices
using the same USB cable

If you sync to another computer the iPhone will be erased and the content replaced with the selected content of the new computer.
You don't maintain a regular backup copy of your computer?
You can transfer iTunes purchases from your iPhone to a computer from iTunes. File>Devices>Transfer Purchases

Device not recognized by stereos / speakers?

Hi, we have a few different stereo's / speakers in our house that all have ipod docks and usb and other plugs for miscellaneous devices but for some reason every other music device is recognized except blackberry products. I've tried my playbook and two different phones including my Q10 and it alwasy says the device is not supported or not recognized? Why? how can every other music device work fine except blackberry?

Errors? Specific issues?

LaserJet p1102w not recognized by Toshiba A505 S6005 in WIN 10

the printer is not found during setup

This is not a one off, it is repeatable on brand new disks.
I previously had the original win10 preview build installed on this hard drive = no problems.
I then did a fresh install of build 9879 from CD. Install completed untill it got to the reboot phase = it would not reboot - the hard drive was not recognized in the bios anymore.
tested broken hard drive in another computer = works
tested broken hard drive in 2nd connector on my laptop = fail (still not seen by bios).
tested a few other sata disks I have laying around on both connectors of my laptop = pass.
upgrade my bios as there is one version higher than I had. = fail (still not seen by bios).
boot from broken hard drive on another computer and finish the OOB portion of the win 10 preview install = pass
So it seems clear that the hard drive is still working, but just not recognized on the original computer. It is only 2 months old so I get it replaced under warranty. Replacement disk is recognized by bios, yeah! I then restore image of broken hard drive
to this replacement. Disk is still recognized by bios. I boot up from this disk on my laptop. It works OK until first reboot, then is not recognized by bios anymore.
Computer = Toshiba Satelite P305 PSPC8U-01400Q
Hard disk = WD blue 1TB model: WD10JPVX-22JC3T0
Note: also with windows 8 running on this computer and the broken hard drive installed in second connector, windows also does not see it, neither through disk manager nor through diskpart command line. But if I boot up in Linux from a bootable USB flash
drive, then I can see the (broken disk) on this same computer. Yes I can see it and I can read and write to the filesystem, even though it is still not seen by the bios.
HI
Disable PUIS (Power-Up In Standby) with HDAT2.EXE With PenDrive BOOT MS-DOS

Adobe products are not recognized in my Internet Explorer 10 on my Win 7 64B professional

Adobe products are not recognized with my Internet Explorer. I cannot open PDF documents on websites and I cannot play MSN games since Flash Player is not found. I have tried manage add-ons and enable status without success. Can anyone supply detailed information on how to fix this problem?
C-adobe

Are you running IE10 in 64-bit mode? The Adobe Reader plugin is 32-bit, and can only run on a 32-bit browser.
Regarding Flash Player, do you have ActiveX Filtering enabled? Disable it.

Stereo turntable PS-LX300USB not recognized by Win 7?

Similar Messages

Maybe you are looking for