Steresocopic 3D editing problems

PP CS5 v5.0.2, Win 7 – 64 bit, i7 940 @ 2.93 GHz, 15 GB, using Mercury Playback Engine GPU Acceleration. I have an nVIDIA Quadro 4000 graphics card (with the 296.700 graphics driver, and the Quadro-3D-Vision-275.33-USB-driver), and it supports Cineform 3D just fine in First Light (note – I have Cineform Studio Professional – v1.1.2.100). However, when I then go to edit the Cineform 3D AVI files in Premiere CS5, they only show as 3D in the program monitor when playback is paused. As soon as Play is pressed, the image starts flickering like crazy and then just goes to black. The clip is still playing, but there's no picture and I can't stop the file until the clip finishes. When I look at the Cineform 3D Display Types from the Taskbar, there is no "page-flip" or "sequential-frame" choice offered. Curiously, Premiere does offer an nVIDIA page-flip option, but it doesn't work properly.
Any suggestions how to fix this?

These suggestions, courtesy Jake Seagraves of Cineform Tech Support, solved Premiere problems:
HDLink does not support the Sony HXR-NX3D1U. Those files need to be transcoded into cineform 3d files using the GoPro CineForm Studio interface. I suggest converting these as progressive files as those work much better in 3D.
Have you set up your nVidia card using these instructions?
http://support.cineform.com/entries/515533-nvidia-pageflip-3d-setup
I did have my NVidia card set up as per your instructions, except for I’m using Stereo - Display Mode “Generic active stereo (with NVIDIA 3D Vision)” because my video card does not have the 3-pin synch cable port. According to nVidia, that is an option for the Quadro 4000 card, but mine doesn’t have it. Thankfully Premiere is working fine now anyway, just with USB synch.
Thanks again for your prompt and professional help Jake.

Similar Messages

Font / text edit problem in photoshop CS6

Hi there,
I have a strange text edit problem in Photoshop CS6 running on Mavericks.
Every time I use the text-tool in PS, write a sentence, mark it and change something like color, font size etc., the marked text vanishes.
I have to "undo" the last step and the changed text appears again.
Every time!
I have a clean installed CS6 with no plugins and no other than system fonts installed.
Everything on a new Mac Pro with OS X 10.9.5
Any clues? Thanks.

Do you have the latest updates for photoshop cs6?
You can use Help>Updates from within photoshop cs6 to check if there are any available.
Also, if you go to Help>System Info from within photoshop cs6, you can see the Photoshop Version in the top line.
You should be on version 13.0.6
See if turning off Dictation solves the issue.
Go to System Preferences ---> Dictation and Speech -----> select OFF radio button .

Launch and edit problem from Dreamweaver to Fireworks

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266405159_588474
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi
Not sure if this is a Fireworks or Dreamweaver problem but
here goes.
I¹ve created a graphic in Fireworks CS3 on the Mac and
Exported the HTML and
related images. I open the HTML file in Dreamweaver CS3, all
fine so far.
Then I highlight the table and click the Edit in
Fireworks¹ button and it
throws up a warning dialogue saying Cannot launch and
edit. The Fireworks
table could not be found in the HTML. Please export from
Fireworks and
re-import the HTML into Dreamweaver.¹
What?!!
I¹ve only just exported it from Fireworks! It¹s
even got the Fireworks table
code in the Code section, so what¹s going here?
Has anyone else had this?
Gaz
--B_3266405159_588474
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
Hi<BR=
>
Not sure if this is a Fireworks or Dreamweaver problem but
here goes. 
I’ve created a graphic in Fireworks CS3 on the Mac
and Exported the H=
TML and related images. I open the HTML file in Dreamweaver
CS3, all fine so=
far. Then I highlight the table and click the
‘Edit in Fireworks&#821=
7; button and it throws up a warning dialogue saying
‘Cannot launch an=
d edit. The Fireworks table could not be found in the HTML.
Please export fr=
om Fireworks and re-import the HTML into
Dreamweaver.’ 
What?!! 
I’ve only just exported it from Fireworks!
It’s even got the Fi=
reworks table code in the Code section, so what’s
going here? 
 
Has anyone else had this? 
 
Gaz
</BODY>
</HTML>
--B_3266405159_588474--

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266407908_747577
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
When you export the sliced graphics from Fireworks it places
them into a
table. In my instance the code says...

So it recognises Fireworks was the the graphics app and jumps
back to it
when you want to edit the image. Fireworks then displays (or
should) a
Done¹ button over the window. You do your alts and
press Done to update the
HTML and graphics back in Dreamweaver automatically.
That¹s the only table I was referring to Murray.
On 4/7/07 3:02 pm, in article
[email protected], "Murray
*ACE*" <[email protected]> wrote:
> Why would you be wanting to edit the table in a graphics
editor, instead of
> an HTML editor?
--B_3266407908_747577
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Re: Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
When =
you export the sliced graphics from Fireworks it places them
into a table. I=
n my instance the code says... 
 
 
 
So it recognises Fireworks was the the graphics app and jumps
back to it wh=
en you want to edit the image. Fireworks then displays (or
should) a ‘=
Done’ button over the window. You do your alts and
press Done to updat=
e the HTML and graphics back in Dreamweaver
automatically. 
That’s the only table I was referring to
Murray. 
 
On 4/7/07 3:02 pm, in article
[email protected], "Murr=
ay *ACE*"
<[email protected]> wrote: 
 
> Why would you be
wanting to edit the table in a =
graphics editor, instead of 
> an HTML editor? 

</BODY>
</HTML>
--B_3266407908_747577--

Premiere Pro 7.1 serious Multicam Editing problems

Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
I have two serious Multicam Editing Problems.
PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
I would be grateful with your help.
Thank you,
Stavros Symeonidis

The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
I remind you that this only happens when multicam monitor is toggled at the program monitor.
Did all these help at all to even reproduce this situation?
Thank you,
Stavros Symeonidis

FC studio2 editing problems with western digital my book home for mac

hi--bought a 1TB WD my book home for mac coupla years ago because it seemed like a good deal for so much space, and provided and eSATA hookup, too. Worked ok for a while. Now, with a growing Motion project that I bring into FC for overall color/levels/export adjustments, I'm getting a long-term beachball every time I try to do anything with it. Just did a complete reinstall of FC studio (after running Techtool pro 5 rebuild and optimizing files and volume), trashed the project and recreated it incase the file itself was corrupted, but the beachball keeps showing up once i try to get past a particular edit and play the file through -- something I haven't had problems with before. Have read this harddrive is a real POS/PIA for many because of its internal "sleep" setting and other weaknesses, and am thinking of cracking the drive out of its case and putting it into a plain eSATA/FireWire enclosure. Anybody else tried this or heard of it working? Money's a big issue right now (too many slow/no pay clients), so can't just run out and get a new drive and transfer w/out trying cheaper route first. Would appreciate feedback, cuz this is makin' me lose what little hair i got left!
Message was edited by: jayvee56
Message was edited by: jayvee56

My question says: "Final Cut Studio 2 editing problems"; I formatted the drive for the mac when i bought it: journaled HFS+, Apple Partition Map; 2 partitions (and connected via eSATA); which has been working fine as is up till now. The sequence and settings are those in which I've worked on many projects for years with no problems up until now. I am also completely up-to-date with all my app and system updates. I did begin to wonder after posting if the reinstall might be the source of my problems, but it was the interminable beachball waits that prompted the reinstall in the first place.

Editing problems with iTunes 64-bit in Vista

Hello!
Just bot a new computer with Win Vista 64-bit and had to install new iTunes 64-bit.
It's somewhat slow when switching between Windows and iTunes.
Also, what happened to the "quick" edit feature?
As in.... highlight song, hit F2 or just click ONCE with left mouse button and you can EDIT the song title, artist, etc...
It's NO longer available!
What happened to it?
I'm RE-importing my HUGE collection of playlists and backed up library and songs, which is all MESSED up and.... I have to spend TONS of time now EDITING the title info!!!
Anyone have problems or any solutions to this "editing" snafu????
Thank you!

Responding to own post.... Found answer!
Must set permissions!
Highlight iTunes folder..
Right click..
Properties..
Securities tab...
Click on EVERY group/user names..
Allow..
Full control..
OK!
Saved!
Darn Windows Vista!
Screwing up the file/folder permissions due to the hated UAC feature!

SAP ISA R/3 Edition problem with TREX

Hi!
We are migration our Internet Sales (R/3 Edition) 4.0 with SAP J2EE Engine 6.20 to SAP J2EE Engine 6.40.
Weve already migrate your Java Basket data. And weve installed TREX 6.1
for catalogue replication and weve created a WEB SITE in IIS.
Weve created a B2B scenario and weve configured xcm for: b2b, Shopadmin
and trexr3.
Apparently TREX is working fine... I can create and replicate catalogs, view the catalogs within TREX, etc. But I'm getting the following error when I try to see the content of catalog within http://10.125.25.57:50100/trexr3/b2x/admin/catalog.do.
Exception from the PCAT API: Index has not been assigned to this
IndexServer;location=sapisaqld01:30203,index=index_id1204052895687pindex(Errorcode 2004) Retrieval of trex index failed!
I've just updated TREX 6.1 to SP33 and the problem persists.
We can find the following messages within TREXindexserverAlert.trc:
[01176] 2008-02-29 11:55:46.812 e indexserver TREXIndexServer.cpp(00632)
: ERROR: not assigned to index: 'index_id1204053610211pindex', function:'showIndex'
and when we try to see the catalog information within
http://10.125.25.57:50100/trexr3/b2x/admin/init.do
we get the message:
Exception from the PCAT API: Index has not been assigned to this
IndexServer;location=sapisaqld01:30203,index=index_id1204052895687pindex(Errorcode
2004) Retrieval of trex index failed!
Any hints?
Cheers,

Hi Dick,
Guess how I solve this problem?
Well.... I've reinstalled SAP TREX 6.1 SP33 and started from scratch.
Thanks
FF

Editing problem in PSE 12

I have recently updated to PSE 12 and have (at least) two problems.
First, the edited versions of images edited in Photo Editor do not save to Organizer or Version Set, although they do appear in the relevant Windows folder. I have checked the various settings in the Save function and they appear to correct. This problem does not arise if I use Instant Fix.
Second, tags in the People, Places and Events groups do not appear when Remove Keyword Tag is clicked, even though they are visible on the screen with the relevant image and work normally to select images. However, tags in the Keyword group do appear normally when Remove Keyword Tag is selected.
I have tried the Catalog Repair function and it tells me that there is nothing to repair.
If I move the images to a different (new) catalog created in PSE12, the problems disappear. This is not a solution to my problem as I have far too many images to organise in a new catalog.
The problems also disappear if I use PSE 10 on the same images.
Advice welcome.

globaltraveller200 wrote:
Michel,...However, the tag issue appears even worse than I thought. The upgrade has
placed my (hundreds of) sub-categories and tags into the new Places, where
I can't find a way to move or reorganise them or add new ones. Do you know
a way to recover from this? Or can I remove PSE 12 and reinstall it in a
different way, so that the tags are preserved (or is it too late to do
this?)
Maurice
Maurice,
Reinstalling is not a solution. I suppose you still have PSE10 and that you have not done many additions and changes to your catalog since upgrading.
To understand why I was not bothered by the migration of people and events tags from PSE10 to PSE11, remember that you can rename categories as you wish, even if they are default categories in PSE10. With my English PSE version, I had renamed People = Personnes, Family = Famille, Friends = amis, and so on. Since the catalog conversion is based on the default category names, the conversion ignored those pre-defined categories et considered them as custom ones.
So, just try to rename the categories in PSE10; MyPeople instead of People, MyEvents instead of Events and so on. Then from PSE12 (would be the same for PSE11) convert again the catalog from the catalog manager menu of PSE12. You have to check the box to 'show already converted catalogs'. That should convert it to the old way. You may have to re-import new items, but that should not be too big a problem.

Can't edit audio tracks anymore FLEX EDIT PROBLEM

Due to year long problems with my Mac, Apple replaced it with a brand new one but it came with the updated Garageband '11 with Flex Time. I currently have a podcast and am over a month behind and because I can't figure out this new audio/flex time edit thing. It appears that I am not the only one on disccussion forums and YouTuve but I need HELP!
PROBLEM: I can't edit tracks. Flex Time turns on and analyzes over and over and over and over. I can't edit or cut things out. It wants to stretch them out! HELP!
FLEX TIME is terrible.

jaysenpluto wrote:
Flex Time turns on and analyzes over and over and over and over. I can't edit or cut things out.
http://www.bulletsandbones.com/GB/GBFAQ.html#noflex
(Let the page FULLY load. The link to your answer is at the top of your screen)

Red eye editing problem

Hi all, I am new here and this has probably been asked and answered but I have not been able to find the answer yet, so please don't slam me to hard for asking for help. The problem I am having is with photos that have red eye in the original. I can edit the red eyes out and the photos look fine on my new imac but when I e-mail to friends they can't believe that the photos I send them have big black eyes. I am guessing it is something to do with the red eye editing. Am I doing something wrong or do I need to use a different program for red eye edits on photos that I send to others, particularly Windows users?
Thanks so much in advance for any help.
Jim Morris

turtle21:
Log into another account on your MBP and see if the problem persists when using iPhoto there. If it does then it's system wide. If the problem is gone then you've narrowed it down to your account.
If it's system wide the 10.4.0 COMBO updater that TD suggested would be the first thing to try. Next to that would be as reinstall of iPhoto. If or when you do try a reinstall of iPhoto you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. The reapply the updaters in the following order: 6.0.4, 6.0.5 and 6.0.6. The last two require the previous version to run.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Strange editing problems in Mail

I have been having two quirks in Mail while editing.
When composing emails I sometimes send several articles from online sources such as NY Times. After copying into mail, I delete the garbage such a "print" links from the original. If I do not select just right, Mail deletes everything from there to the top of the email instead of just the highlighted text.
When responding to an email I received, I do a reply and then add text at various places through out the original. At times I will click some place to enter text but the entry point will be in a completely different place. Areas of text appear to be inaccessible even though I can see them. Later the problem may go away although I am not sure what I did to cause it.
And of course the problems are not always consistent.
Is this just a quirk that I have to live with, it is a bug I should jus report [where?] or is there something to do about it? I have found ways to work around these problems most of the time, but sometimes I forget and the results are not what I thought that I was sending.
iMac intel 24" Mac OS X (10.4.8) canon printer & scanner

I have this same issue. Your image is down,but here is mine http://twitpic.com/f9cye. I'm going to hope the upgrade to Snow Leopard on Friday fixes it. I'm doing a clean install rather than an upgrade.

IPhoto editing problems

I'm have an iPhoto problem. I'm currently in version5.0.4 (263). In
edit mode when I try to bring up a photo with a date before October
2005 I get the spinning gear wheel and the image never loads. The
thumb nail is at the top of the page but the large, editable
picture doesn't load. There are only a very few photos pre-10/05
that will load. (All photos after that date seem to work fine.)
I went to the iPhoto library to check out those photos and find
that the information is available for the photo but under "Size" it
says "Zero KB on disk". However, on the iPhoto information window (lower left) the same photo's size is 1.5MB.
I tried opening some photos is Preview and Photoshop. In Preview I
get a blank screen. In Photoshop I get this message: "Could not complete your request because a JPEG marker segment lenth is too short (the file may be truncated or incomplete)."
So, it seems like the thumbnail is still intact but the main file
is gone. Fortunately, I have all my photos backed up. But if I'm
going to use iPhoto (which I would like to do) I need to solve the
problem. I figure either there is problem with the software, or I
did something wrong in handling the photos.
In regards to the second, the only thing I can think of that might
effect the library is when I backed up. At this point I don't
remember the procedure I followed. But, if I dragged the folders
from the library to an external hard drive without making a copy,
would that remove the original information from the iPhoto library?
Any help on this will be appreciated.
iMac PowerPC G4/1GHz/768 MB Mac OS X (10.4.6)

Welcome to the Apple Discussions. Try the standard fix: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

IPhoto editing problems...please help!

Hi! I have iPhoto on a Mac bought in 2008. Recently, it's started not to save all the edits to a photo, especially the 'reduce noise' which I use a lot for portraits. It also fails to retain some edits when I export or email a photo. Help me!
Thank you in advance, you very clever people!

Welcome to the Apple Discussions. First try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, reboot, launch iPhoto and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

PSE 7 Editing Problem using Photoshop CS4

I recently upgraded to PSE 7 and am totally confounded by a recurring problem using Photoshop CS4 as my editor for photos from PSE 7. When I enter Ctrl + H, Adobe Photoshop CS4 opens the photo just fine and I am able to edit without any issues. When I am done editing, I save the file, close Photoshop (or close the file) and the photo is immeditealy deleted from the directory even though it was just saved in the directory.
I recently re-installed Windows XP, PSE 7, and Photoshop CS4, and the problem continues. Any help or suggestions? I really prefer to use the Photoshop CS4 editor.

Thanks for the response. However, I don't believe the article you you referred to actually refers to the problem I'm having. It seeems more specific to thumbnails from .PSD files created in CS4.
However, the work-around you mentioned is a possibility for me as well. However, instead of overwriting the original, I can also save the edited file to another directory and copy it back to he directory once I exit PSE. This gets to be a REAL PAIN, though, when you're editing several photos at a sitting.
Thanks, again, for the suggestion.

IPhoto Editing Problem

I have a Mac OS X running Snow Leopard version 10.6.8. I have iPhoto '09 version 8.1.2.
I have been having a problem the last two times I have imported photos to my iPhoto library from my camera. I edited a few photos, and it worked, but when I double-click to view them they just show a black screen. They will show the edited picture in the thumbnail and in full-screen view, but not when I double-click them. Also, when I click "show file" the original file shows the thumbnail of the picture, but the edited file just shows the generic jpeg file picture. When I try to open that file in Preview, it says it cannot open the file because the folder is empty. But, if I revert the file back to the original, it is fine again.
I have already re-installed and fully updated the Snow Leopard version I am running, as well as rebuilding my iPhoto library, and re-installing iPhoto on my computer. I have also deleted the pictures from iPhoto and imported them again from my camera. (This problem occurs under both names on my computer.)
I would also like to add that I am only having this problem with the last two imports from my camera. The photos from my iPhone work fine, as well as all of the previous pictures already exsisting in my iPhoto library that I imported from the same camera.
I would love to solve this problem without having to lose all of the pictures I am trying to edit. Please help!

Hi there,
You are not alone, I did that one time, took a nice 3 minute video, downloaded, and assumed it could easily be rotated. We were both wrong, your video cannot be rotated. Sorry...
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Steresocopic 3D editing problems

Similar Messages

Maybe you are looking for