Steve Jobs fails to show up in my Outlook contacts

My Outlook 2007 contacts have a single entry "Steve Jobs" which I try to sync with
iTunes 8.2 on a Windows machine to my iPod touch runinng 3.x firmware. There are a few dozend contacts on the iPod. The sync takes a while, in the synchronization
SqlLite database quite a few entries are created but Steve Jobs's contact is not transferred to the iPod and the iPod's contacts don't make it to Outlook.
What would you suggest to get things working? None of the FAQ stuff seems to help

More symptomps:
Adding a single entry on the ipod touch side will lead to a message that
more than 5% of the data have been changed. So it looks that iTunes believes the number of records in Outlook is zero.
Also when selecting a category of calendar entries to sync all other category entries will be deleted on the ipod. I'm happy that I have a backup pst file and that syncing works in two other enviroments that I'm running: on an outlook 2003 machine and another outlook 2007 computer there is no problem.
Upgrading to Outlook 2007 service Pack II also did not help.
Still I'm looking for a way to set a debug or logging option or someother way to find out why
iTunes does not sync anything to or from Outlook 2007
iTunes does not complain that there is no Outlook 2007 connection
iTunes believes there are zero entries in Outtlook 2007
iTunes does not complain when trying to sync a modified / new entry from the iPod Touch to Outlook
This is all very strange. I'd hope that an apple developer would join this discussion to give more insight on what is going on behind the scenes.
Making iTunes openSource would of course be the optimal choice to avoid problems like the one in this thread.

Similar Messages

Video cables Steve Jobs used??

What kind of video cables did steve job used when showing the iPhone on big screen, showing the entire iPhone screen ?

We have no clue. The cables were probably standard cables like the AV component cable, or the composite cable. The difference is that steve was using special iPhones which allowed him to use video out capabilities across all screens. This is not something that can be done with a normal iPhone.

Why is my iPhone camera not as good as the one showed off by Steve Jobs?

In the WWDC 2010, Apple's CEO Steve Jobs showed off the iPhone 4's 5MP camera. But mine is not that great, I get a lot of camera noise and the digital zoom *****, the video capture has a lot of noise too. What's up? Is my iPhone messed up Or are all iPhone 4 cameras like this?

neeraj_96 wrote:
In the WWDC 2010, Apple's CEO Steve Jobs showed off the iPhone 4's 5MP camera. But mine is not that great, I get a lot of camera noise and the digital zoom *****, the video capture has a lot of noise too. What's up? Is my iPhone messed up Or are all iPhone 4 cameras like this?
You are probably trying to take pictures outside of the lighting conditions that are optimal for the phone. Camera noise is almost always a sign of insufficient light.
And digital zoom is a hoax on the inexperienced photographer. All it does is use less of the sensor, so it is the same effect as cropping the photo on your computer after taking it. This is true of any digital camera, not just the iPhone's.

Adobe: Show Steve Jobs who's boss.

Adobe,
You, like many of us must be angry at Apple right now after the recent ban on 3rd party (flash) created i-phoine apps just days before the public unveiling of your new Creative Suite. I could only image the number of man hours put in by your flash team to get the i-phone app compiler into CS5.
I do not like Steve Jobs anymore. His open arogence and passive agressive maliciousness are beyond acceptable.
Would it be too much to ask if every application in CS5 could be released only for PC? Sure, most people who use CS would have to buy a new computer, but it wouldn't be a mac, so it would be pretty cheap. As a PC and Mac and Adobe user I can say there is no reason what-so-ever for Macs to be the standard for adobe products anymore. Processor speeds, graphics cards and memory are all so high now that it just doesn't matter if you are using a mac or PC.
I know this may hurt your sales at first, but don't worry, it'll be ok. Adobe products are the industry standard for all forms of multimedia development and the alternatives are either non-existent or crude and lacking. You own the market. Your customers will switch to PC if that is what you dictate. They will have no choice; Their livelihoods/jobs all depend on your products. In the end Apple will lose allot more money then you, which is all that matters to me anymore. Someone needs to bring Steve Jobs down a notch and you have the power to do it.

The problem with Adobe Products is that most people use them without adequate training. A little study of various manuals, seminars and online tutorials can make one good and be able to solve those small glitches.
I don't have any problem with the CS3 as the integration is unique and unequalled by any other company. The shortcomings are the Non Realtime playback in PPro. but it renders very fast and also not accepting Inscriber CG and Title Deko like 6.5 but Photoshop, Fireworks and Afterfx are there.
Imagine this guy saying of the so called University removing Adobe Products
"Most people can not even install the latest software because of the changes to adobes install programs."
The Adobe installtion is still the same and I think the guy can not read or is new to Computers. Read the manuals Please

ITunes Truncate Track Ending, Unsolved in 2+ Years: My Letter to Steve Jobs

I have posted this problem twice in this forum. Twice they were answered with something totally irrelevant, and then marked "Solved" and deleted.
Finally, I am going to mail the CD, and this letter to Steve Jobs, to let him know personally the bug, after so many years of iTunes, and the bullish way his stuff has been treating my questions.
Dear Steve,
My name is Leping, Ph.D. in Physics, working in the San Francisco Bay area as a senior medical imaging scientist. I am a long time and loyal Mac user and promoter -- actually I have not yet really needed to use a PC in my life (except for serious music ripping -- see below), and in the graduate school days our five+ million dollar NMR lab was run from a Mac.
Unfortunately, I am also an avid classical music enthusiasts, and part time musician. Needless to say I am now with my 6th iPod, and I believe I understand all the bells and whistles of iTunes. I am not talking about the higher-level bit-wise accurate CD ripping, that is only available on the PCs, through the EAC software, since also, as a well-regarded and published photographer, I know when is the time to use the pro level applications, such as Adobe Photoshop instead of iPhoto. For my photography works please check out my website at http://www.lepingzha.com -- I will be more than glad if you and/or Apple have use of any of my images.
However, I know a long time iTunes bug, that have never been addressed. Actually I posted it twice to the Apple web discussion forums, but was twice offered irrelevant answers, followed by the subject flagged as "Solved", and subsequently deleted.
Please open the still sealed compact disc in this letter, which I got in a retailer just to show you the problem. The title, Deustsche Grammaphon (DG) B0003902, is "Lang Lang plays Rachmaninov Concerto for Piano and Orchestra No. 2 and Rhapsody on a Theme of Paganini". It happens I am a Chinese American, but I want you to listen a bit into the disc not because I am a fan of Mr. Lang's playing -- as a matter of fact I actually not, but for the much more serious reason.
Please rip the Rhapsody in iTunes, to any format (AAC, Apple Lossless (ALAC), WAV, MP3...) starting from track number 4. A few tracks after that point would be adequate -- these are very short (10-30 seconds) tracks that truly highlight the problem. Listen to the resulting music, and the original CD, you will immediately hear the big problem, start right at the end of track 4 and at the end of every of these short tracks -- fraction of the ending second(s) are harshly chopped off, brutally truncated, and uncover-ably lost.
The same thing happens anywhere I use the Apple codecs, for example, converting the EAC (bit-wise correctly, as confirmed by its check-sum feature against the known sum database) ripped WAV files to ALAC or AAC, for instance, either on a Mac or a PC. The very same thing just happen, while there is no problem to any other non-Apple codecs (mainly to flavours of MP3 -- since Apple has the AAC and ALCA codec nobody bothered to write their own, I guess). So for our serious classical listeners, the iTunes and the Apple codecs are very problematic if not useless in many cases (operas immediately in my mind)!
Please alse not that, over the time the same problem has always been reported here, there, and basically everywhere, but every time there are gurus made comments which does not solve the issue. The followings are some recent examples.
http://discussions.apple.com/thread.jspa?messageID=6246698&#6246698
http://discussions.apple.com/thread.jspa?messageID=6513266&#6513266
I hope you, my much respected and praised Steve, realize, that, how could, and mostly unthinkable, after so many great years, there can be still such very basic and serious issue the iTunes codecs can not handle in the right way? Does the track length information get truncated somewhere (or floored to an integer)? Why it is so difficult to acknowledge such a basic issue, and to have it fixed in the next release?
Thanks for your time and hope you enjoy the music.
Look forward to hearing from you soon.
Best regards,
Leping Zha, Ph.D.
San Mateo, California, U.S.A.

Finally found the reason: in the track's option field for some reason the "stop time" flag is checked and the timing is always about a second earlier than the actual track length.
Searched Doug's scripts and there is nothing to batch reset, or unflag the "stop time" tag. Anyone has a better idea rather than trying to deselect the tag track by track?
Once the "stop time" is unset the converted tracks will play through without truncations at the end.

SQL Server Agent Job Failing on Job Step

Hi,
Firstly, apologies if this post has been made in the wrong group. Running SQL Server 2012. I'm attempting to add a SQL Server Agent Job which calls a stored procedure that sends a Database Mail message. The SQL Server and SQL Server Agent
both run under the NT AUTHORITY\NETWORK SERVICE account. The Database Mail service has been enabled, and a public profile created. When running the stored procedure manually, I receive no errors - everything runs as expected and I do receive an
email containing the expected information.
I've created the job, job step, job schedule, attached the schedule to the job, and assigned the job to server, all using T-SQL without error. I've also enabled the mail profile on the SQL Server Agent, and I know that part is working because when
the job fails, I get an email notification of the failure.
I've checked the command text in the job step and parsed it within the SQL Job Step Edit window to confirm, it shows as parsing correctly. However, when I manually run the job itself, I get the following:
Execution of job failed. See the history log for details.
I check the history log and it shows:
[474] Unable to refresh Database Mail profile Database Mail Profile. (reason: ) (Not a typo, the history log shows no reason)
[260] Unable to start mail session.
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
The command text on the failing job step is as follows:
DECLARE @date [varchar](10)
SET @date = CAST(GETDATE() AS [varchar](10))
EXEC [dbo].[GetExceptions]
@company = 'MyCompany',
@checkDate = @date
With regard to the date value being passed as varchar: This stored procedure is used to check for exceptions against multiple databases on this server (hence the company parameter) via dynamic SQL. I'd much prefer to use proper data typing but this
is the only way I could get it to work.
Does anyone have any suggestions on anything else I could check, or insights into why this is failing? Any help is greatly appreciated!
Best Regards
Brad

I am not sure if this really helps but I would do follow the below steps:
1. make sure sql server agent has database mail enabled(rigt click on server agent--properties--alert system--enable database mail and choose right profile.) and RESTART THE SQL SERVER AGENT.(i know you said it i working, but sometimes, restart the
sql server agent might fix)
2. check agent error log and check if any error messages.
3. run the command text you mentioned in sql server and see if it is working.(i know you said it is working but just to make sure).
4. make sure sql server agent service user has permissions to run database mail in msdb. check this https://msdn.microsoft.com/en-us/library/ms186358.aspx
5. Check the output from select * from msdb.dbo.sysmail_log and if it says anything
6.it does not look like the job log is getting truncated but to make sure, get the job step output to a text file.to do this, edit the job step and on the job step properties click on advanced, enter path to the output file. this will give the complete
output for the step.
Hope it Helps!!

SSIS job fails on connection to target db - works in debug

the ongoing saga...
I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package. The website and the instance of SQL Server with the agent and SSIS package are
on the same windows 2008 r2 server. When the button is operated no exceptions are raised but the SSIS package did not execute. The SQL Server Agent job owner is sa ...that seemed to resolve some issues as originally I had the owner being another
admin on the same box. Now the job seems to be failing on connect to the target database on an IBM iSeries DB2 server. The job runs fine in debug connecting to the db and doing its task successfully.
The log indicates that the user specified in the connection manager is using an invalid password or is otherwise unable to connect, although it works fine in debug mode and save password is specified.  I use BIDS remote desktoped to the server
when developing and debuging.
Can anyone show me whats wrong now? Thanks much in advance for any help, Roscoe
The log shows as follows...
The job failed. The Job was invoked by User DOMAINNAME\myuserid. The last step to run was step 1 (Step1).,00:00:00,0,0,,,,0
06/12/2014 13:34:50,runWebDevSmall,Error,1,NTSVR59,runWebDevSmall,Step1,,Executed as user: WINDOWSSERVRNAME\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 10.0.5500.0 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights
reserved.    Started: 1:34:50 PM Error: 2014-06-12 13:34:50.31     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node "DTS:Password"
with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error:
2014-06-12 13:34:50.84     Code: 0xC0202009     Source: vbTestsmall Connection manager "iSeriesname.DBNAME.iSeriesuserid"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE
DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 Session" Hresult: 0x80004005 Description: "CWBSY0002 - Password for user iSeriesuser on system iSeriesname is not
correct ". End Error Error: 2014-06-12 13:34:50.86     Code: 0xC00291EC     Source: clear iSeriesname libraryname tablename Execute SQL Task     Description: Failed
to acquire connection "iSeriesname.DBNAME.iSeriesuserid". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:34:50 PM Finished: 1:34:50 PM Elapsed: 0.703 seconds. The package execution failed. The step failed.,00:00:00,0,0,,,

Hi Arthur, Thanks for the reply,
BIDS would not let me save the package with ProtectionLevel of ServerStorage giving error...
Failed to apply package protection with error 0xC0014061 "The protection level, ServerStorage, cannot be used when saving to this destination. The system could not verify that the destination supports secure storage capability.". This error occurs when saving
to Xml.
(vbTestsmall)
...but it would let me change the ProtectionLevel to EncryptSensitiveWithPassword so I did that and provided the jobstep in the agent with the password and the agent was able to run successfully.
Thanks for all the help...I will follow your blog, Roscoe

BO Data Services 3.2-Job fails with 'TNS:No appropriate service handler err

Hello all -
One of our DS jobs has started failing intermittently showing the following error in its log:
Data flow DataFlow_1 - OCI call <OCIServerAttach> for connection <abc> failed: <ORA-12519: TNS:no appropriate service handler found>.
This has started happening recently after we've upgraded the repository database form Oracle 10g to Oracle 11g (11.1.0.6). The source and target are also 11g.
If anyone has encountered this error before, please can you provide some pointers on how to troubleshoot/resolve this.
TIA.
Regards,
Tarun.

I have found this thread which talks nearly same about your issue.
TNS:listener could not find available handler witht matching protocol stack
The session count has to be decreased, that is the crux that comes out from this thread.
Listener some how have a count of the incoming connection request. If that number tries to go beyond process parameter value,this error is reported.Now I amnot sure that why this is happening in your case as the parameter value is already higher than the incoming connections.
And voilla!You are using XE I believe so its a bug in it. Read this thread,
Re: Intermittent ORA-12519 error on 10g XE
HTH
Aman....

SQL Server agent job failing to back up database

I have set up a SQL server agent job to back up database on regular basis.. For some reason the back up fails.. Could not find any meaningful info in the logs.. Transaction logs are getting created for the same DB but not the database back up..
The below is my environment..
MS SQL Server 2005 - 9.00.1399.06
Windows 2003 server SP2
Any pointers would be helpful.. I checked the event logs and the agent logs and did not see obvious error.
Thanks

I have set up a SQL server agent job to back up database on regular basis.. For some reason the back up fails.. Could not find any meaningful info in the logs.. Transaction logs are getting created for the same DB but not the database back up..
The below is my environment..
MS SQL Server 2005 - 9.00.1399.06
Windows 2003 server SP2
Any pointers would be helpful.. I checked the event logs and the agent logs and did not see obvious error.
Thanks
NO answer can be provided unless you show us the error message. There can be numerous reasons for backup job to fail. See job history for details please post complete information present in job history.
Check errorlog and note what error message is there at time when the backup job failed. You could find something useful. Please learn how to post question in forum just saying I have a problem will not help both of us.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SEND_SYSTEM_RELATIONSHIP_TO_SUPP job fails with "No customer numbers ..."

While executing SOLMAN_CONNECT tcode, I get the error
SEND_SYSTEM_RELATIONSHIP_TO_SUPP job fails with "No customer numbers in transaction AISUSER".
SAP note
Note 1351731 - Termination SEND_SYSTEM_RELATIONSHIP_TO_SUPP/SOLMAN_CONNECT
says problem fixed against ST 400 with SP SAPKITL431.
I'm running NW 7.0 SPS 15 which has ST 400 SAPKITL425.
I need to get SAPKITL431. but when I search SWDC for this package, I can only find SAPKITL430. I need to get SAPKITL431 in the download basket and have someone at SAP to turn off the MOPZ requirement so I can use DLManager to get the SP dlownloaded and installed. Are there other dependent SPs required. Or am I better off downloading SPS 16 or later.
I need the MOPZ requirement turned off for this until I can get the fix and get MOPZ up and running.

Hi Andreas,
AISUSER was unchanged, which contained the S-user # for user DDIC and myself.
I went thru the steps in note 1140822, eventhough I had turned off BAdI months ago when I was setting up the RFCs for SAP-OSS. I maintain just one S-User. Therefore followed option 2 in the note.
Trying to implement snote 114822.
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
Exception of class CX_SY_NO_HANDLER
An exception of type 'CX_SY_OPEN_SQL_DB' occurred, that was not caught anywhere in the call hierarchy. It was not handled locally or declared using a RAISING clause.
TC SE19 shows AI_SDK_SP_RFC_RP as active.
Selected New BAdI and Display.
Re-executed note 1140822 and it worked this time. Apparently, the display of AI_SDK_SP_RFC_RP activated this implementation.
Snote 1140822 completed. I set process status to completed.
I reran MOPZ under tc solution_manager. I now get a different error. ERROR: E:/TMWFLOW/MO_BACKEND:025.
I forced a run immediately on SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT, whcih ran successfully NOW.
Now MOPZ runs fine and I can see my files to download. I did not have any logical systems to select, but MOPZ did pickup some patches anyway. Not sure why no logical systems at this point. I defined a few logicals for both SM and satellite systems. I'll address this issue separately and open new thread, if need be.
The one question that remains is using SE19 to display status of AI_SDK_SP_RFC_RP appears to of activated it. Is this right? It fixed something such that now the applying the snote worked in de-activating it.
Thanks for all your help.
-Don Isler - HP SAP CC.
P.S. Is there a way I can upload or email you a word doc that has my screen shots and details of what I tried?
Edited by: Don Isler on Jul 29, 2009 1:36 PM

Job errors but shows warning

We have a situation where we have a job with multiple workflows, each with multiple dataflows. When the job ran we received an error on one of the dataflows.
However the job itself only shows a warning. The HDBODBC is a known warning that we ignore so our Ops team did not pick up that this job had failed.
Subsequently the steps after the failed step did not run and the monitor log shows it died in the middle of the failed step.
This is how the workflow is set up and it was the first dataflow that failed.
Long story short is this a known bug that is fixed with subsequent versions (we are on 4.0). Is there a way to work around this so that the rest of the job can continue?
Thanks,
Ken

See my comments....
1-Can you please check that your DSN created for HANA database is working fine. as it says HDODBC is unknown. (KEG - My understanding is this is a known bug with 4.0 and HANA that will be fixed in subsequent versions. We plan to upgrade in the summer).
2- PLease increase the field length for WBS_TEXT. (KEG - I believe this is also a known issue where SAP ERP and HANA have datatypes of NVARCHAR but data services does not. Data services treats the nvarchar field (because if unicode one byte is represented as two) as varchar and it causes the error. This again will be fixed with an upgrade).
3 - For the first run don't create any sub_data flow. (KEG - I will look into this but I have another case where I have a job with a workflow and three dataflows. First dataflow is an RFC call back to an SAP function, 2nd dataflow processes the data, 3rd dataflow is another RFC call. No sub dataflows. In this case we get an error in the 2nd dataflow, the log shows the step marked with "proceed", but the job itself is marked Green as if it completed successfully. The 1st and 3rd dataflows show "stop" in the log).
The known issues aside in 1 and 2 above my concern is more about how data services seems to be operating when there are errors. Sometimes running additional dataflows, sometimes not. Marking the job with a warning or as successful even when there are errors. I am trying to understand if that is a setup issue with how the jobs are constructed or a known bug with 4.0.

Every day Expired subscription clean up job fails on publisher server

Dear All,
Few days back I configured transactional replication b/w 2 server after that every day I noticed
Expired subscription clean up job fails on publisher server but not any effect to replication it's going smooth.
ERROR MESSAGE:
Only functions and some extended stored procedures can be executed from within a function. [SQLSTATE 42000] (Error 557). The step failed
please help me!!!
Thank In Advance!!!
mastanvali shaik

Actuvally already I configured replication for this server 3 database after we moved to another server for some h/w issue.
that time we deleted subscriber and publisher and break transaction replication.
after new server configuration it's allow to configure replication for 2 databases only.
as per above query I found category 1 for 3 databases but 2 databases are in replication.
the another databases that showing category 1 is past in replication, but it doesn't allow to configure replication.
please give me solution for same .
Db name
dbid
sid
mode
status
status2
category
cmptlevel
version
ABCD
7
0x010500000000000515000000C953D90F09EF4A00F4EBEF3281230000
0
65536
1090519040
1
100
661
-replication running
FGH
11
0x010500000000000515000000C953D90F09EF4A00F4EBEF3281230000
0
65536
1090519040
1
100
661
- not allowing for replication
XYZ
12
0x0105000000000005150000006FE21C5B049413F15AD147AEF4010000
0
65536
1090519040
1
100
661
-replication running
past replication working for three databases
mastanvali shaik

Re, "Podcasts about Podcasting" area on itunes and thank you, Steve Jobs.

Hi,
I've just started my About.com Guide to Podcasting and was hoping to eventually be listed in this prestigious list of folks. Knowing that I'm a total "newbie," wondering if any of the iTunes folks/fellow podcasters have any advice about getting listed in this area?
I also searched through the Technology Podcasts (as well as the podcasters on podcasting page) and couldn't find my show listed. Is this just because it's so young? I've heard you need to have four to five shows up before you're considered more than a flash in the pan.
Tangent: In this first episode (at the end) I talk about how watching Steve Jobs present at last year's Apple conference (talking about latest iLife suite) transformed my adult life (obviously for the better!) Didn't know if anyone at Apple (PR folks, etc.) would be interested in hearing it, but I'd love their feedback. I'll have the podcast listed on the about.com site (front page of the podcasting channel) so I hope to have lots of listeners/subscribers.
Thanks for the advice and best regards to all,
John C. Havens
About.com Guide to Podcasting
http://podcasting.about.com

Hi S,
Thanks very much for your help. I'll keep on podding.
Tangent: Do you have any MAC mail experts over there? For my about.com emails, people have said the "reply to" button says, "[email protected]" instead of "com" at the end. about says it's not on their end, and I've done the preferences/account checking thing multiple times. Any thoughts? If you could respond to: [email protected] that would be great because you might be able to see what's happening.
Or here. Not sure what the protocol is, so thanks.
John C. Havens

Steve Jobs tributes- thoughts?

With so many tributes popping up, I'm curious which have been particularly inspiring or well-done. It's amazing how many Apple fans are showing their memories and grief for Steve Jobs. He truly was a legend of our time. So thanks for pointing me to inspiring tributes.
One I found interesting: www.reeltributes.com/stevejobs. They're making a film out of users' submissions. Seems like a cool idea.

With so many tributes popping up, I'm curious which have been particularly inspiring or well-done. It's amazing how many Apple fans are showing their memories and grief for Steve Jobs. He truly was a legend of our time. So thanks for pointing me to inspiring tributes.
One I found interesting: www.reeltributes.com/stevejobs. They're making a film out of users' submissions. Seems like a cool idea.

Steve Jobs fails to show up in my Outlook contacts

Similar Messages

Maybe you are looking for