Sticker Faded
Good day,
Yesterday, I reformatted my Lenovo Y560 as it has been slightly over a year that I've owned it. I feel that it is always good to keep the Windows install fresh. What I didn't know, however, is that the CD key had faded off the bottom on my laptop. The sticker is not legible. Is there a way where I can find out my CD Key based on my Lenovo's serial number? Is there anyone at Lenovo who would have access to this kind of information?
Thank you,
Joga
Has worked for me before.
Also I have used AB Restore, find it on the web.
Sorry, I thought you still had the original windows installed.
You will either have to order restore disks, if available,
or purchase windows.
Similar Messages
-
Reinstalling, serial "Invalid," Windows 7 sticker faded
I have an HP CQ60-615DX with Windows 7 Home (64 Bit) pre-installed.
My computer was running increasingly slowly so I uninstalled and attempted to reinstall ran into a roadblock with the serial number.
The 25 digit number on the back of my computer was not the serial or is now invalid. The number was not on the "Windows 7" sticker, but was underneath the battery. If there was a serial number on the Windows 7 sticker, it is no longer legible. The only readable lines on the sticker are a barcode, the software version, and a ###### ### formatted code.
Is it possible to retrieve a working serial from the visible information or tmy laptop's serial number? My computer is currently unusable. Please help if possible, thank you.I'm not sure that this is what you have done but if not try it:
Call Microsoft Using Manual Phone Activation
1. Open Windows Activation - click the Start button, right click Computer, click Properties, then click the option to activate Windows now or change your key.
2. Click Show me other ways to activate.
3. Type your Windows 7 product key, and then click Next.
4. Click Use the automated phone system.
5. Click the location nearest you from the drop-down list, and then click Next.
6. Call one of the available phone numbers listed.
7. Do not select any options and wait for a person to pick up, then explain what happened. -
I have 2 of these laptops and both of the COA stickers on the cases are so faded out I cannot read them. I have taken pictures and maginified them to the highest point of clarity. On one I can now read 3 sections clearly and partials of the other 2. On the other one it is a total fade out. Does anyone know or can you suggest a resolution that does not require me purchasing a retail version of Windows 7? I had this problem with a Dell laptop and when I contacted them them mailed me a set of recovery disks for free even though the machine was out of warranty. Hp wants $30 plus to send me a set and I have to order a set for each machine. Help requested please!
Coinhunter wrote:
I have 2 of these laptops and both of the COA stickers on the cases are so faded out I cannot read them. I have taken pictures and maginified them to the highest point of clarity. On one I can now read 3 sections clearly and partials of the other 2. On the other one it is a total fade out. Does anyone know or can you suggest a resolution that does not require me purchasing a retail version of Windows 7? I had this problem with a Dell laptop and when I contacted them them mailed me a set of recovery disks for free even though the machine was out of warranty. Hp wants $30 plus to send me a set and I have to order a set for each machine. Help requested please!
If the O/S is still factory install you can use free Product Key readers online to find your COA keys on both laptop and then write it down so you won't loose it.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
Re: I need to activate Windows but my code sticker has faded
My computer died so we have reinstalled Windows only problem is though is the activation code that
comes with the computer has faded off and the stickers all kinda weird.
Microsoft have told me to ask toshiba if they can track which activation code was for my computer (I think it registered the computer serial info when I first got it). I can't find a way to ask Toshiba unfortunately.
Help? I can't afford to buy it again. I already paid as part of the computer cost.Hi
> I can't afford to buy it again. I already paid as part of the computer cost.
You are right about that. Toshiba offers notebook with preinstalled operating system and when you buy notebook you pay for hardware, preinstalled software and valid licence for this preinstalled OS.
Please note this product key belongs to preinstalled OS version and it is not some kind of universal key that you can use for activation if you use own OS version.
When you buy new notebook recovery image is saved on HDD as backup. This allows notebook owner to reinstall original recovery image ans start to use notebook with factory settings again.
In case that HDD is defective or owner hat installed own OS version this recovery image will not be usable anymore.
To avoid this situation Toshiba has preinstalled small Toshiba recovery media creator to allow notebook owner to create recovery media as DVD or USB and make recovery image back-up.
This recovery media is bootable device and recovery image can be installed without any problem.
If you check users manuals document that you got with your notebook you will see that the whole theme is described there. With other words every notebook owner is informed about all this.
Due to all these reasons recovery media creation is very important.
Back to your problem: after reading your posting I don't know what is your problem exactly and I don't know if HDD is defective but I presume you didnt create this recovery media, right?
In your situation you have two possible options:
1/To install Windows using original Microsoft installation disc but in this case you must obtain valid licence
2/ To install original recovery image using recovery media.
Sorry but there is no third option. -
TrackPoint pointing stick not working on brand new ThinkPadE440
I recently purchased a Lenovo ThinkPad E440 from the official lenovo website and received it two days ago. I would like to use the TrackPoint pointing stick but I can't enable it via 'Mouse Properties' in Control Panel as the entire TrackPoint section is faded out (you can't check the box that says enable). Could someone please advise me on how I can enable the trackpoint? Not sure if this is important but the laptop has Windows 8.1 installed.Thank you.
Hi Pbahal,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with Track Point on ThinkPad E440.
I suggest you to uninstall current version of ThinkPad UltraNav driver, and download the latest driver for Windows 8.1 OS from the Lenovo link and install to resolve the issue.
Below is the link to enter the downloads page and install Wifi driver and check accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Liquify (CS6) is fading the affected area
When I use liquify under CS6 (not previous versions of Photoshop), the affected area (as defined by a bounding box) appears to be strangely faded if it had any alpha on it.
Example: I make a smooth gradiant from full-alpha black to nothing. I then use liquify to make squiggles in the lower right. The result: a rectangular area defined by the squiggles is visibly lighter than the surrounding region.
http://i45.photobucket.com/albums/f57/ADamiani/LiquifyProblem.png
Seems to work fine if (but only if) the whole image is fully opaque.
Not really sure what to do about this.Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3093 MHz
Built-in memory: 8175 MB
Free memory: 5588 MB
Memory available to Photoshop: 7243 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 6800 Series
Display: 2
Display Bounds:= top: 0, left: -1600, bottom: 1200, right: 0
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: AMD Radeon HD 6800 Series
OpenCL Version:
Driver Version: 8.982.0.0
Driver Date: 20120727000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 6800 Series
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 91198198868649495769
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\ANTHON~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 465.8G, 179.0G free
C:\, 59.5G, 4.22G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
Hi guys
I am having a bit of a problem with mpeg1 playback in quicktime (7).
When i open the movie in QT the first few seconds stick and jerk (the audio is ok).
This is happening with the mpg1s that i try -they all run fine in windows media player however...
Unfortunately i am on a pretty tight deadline here, has anybody else encountered this problem??Hi, been checking this out a bit. Seems to me that the problem occurs with the movies fading in from black (this fade in added in Adobe Premiere Pro 2.0).
When I take the fade out the movie no longer sticks when converted to mpeg1.
But i would still like to use the fade-ins if at all pos...
Can anybody explain this? -
Windows license key from sticker are unreadable
I was looking at the bottom of my T400 today, and I noticed that both the Windows Vista sticker that the machine came with and the Windows 7 sticker that contains the license keys are unreadable. It appears that the license keys have faded the same way that something printed on thermal paper (like an old school fax machine or a cash register receipt) fade over time or when exposed to heat.
Obviously I don't care about the Vista sticker as I upgraded for free to Windows 7. However, if something were ever to happen to the machine and I needed the license key (such as a reinstall) I'd like to know how to go about getting one.
I noticed on the T420 that the sticker is located in the battery compartment, and this sticker shows no signs of fading.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.nibs wrote:
It appears that the license keys have faded the same way that something printed on thermal paper (like an old school fax machine or a cash register receipt) fade over time or when exposed to heat...
I noticed on the T420 that the sticker is located in the battery compartment, and this sticker shows no signs of fading.
It looks to me that the serials are printed using some sort of laser printer on top of preprinted sticker stock. The fused toner that forms the characters is prone to wear from abrasion such as when you slide the ThinkPad in and out of a sleeve. Print something that has a lot of black on standard paper using a laser printer. Fold the paper over the black and you'll see that the toner has cracked. I believe something similar happens with the stickers on the bottom of ThinkPads.
For the past several years, starting with T60 series, I've always put a layer of standard 3M office tape over the serials on the bottom of every ThinkPad. These serials include MTM, Windows, MAC addresses, etc. All of these serials are as readible today as they were when the ThinkPad was new. This also suggests it's an abrasive wear not thermal degradation issue.
I suspect the stickers got moved inside the battery compartment (or elsewhere like inside the SIM/SD compartment on TPT2) for this reason.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30 -
Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
Can no longer write to USB stick when formatted as FAT/FAT32
I had about 2GB worth of mixed content on an 8GB stick, which I use daily on my Mac (OS X 10.6.2) and at work (XP).
I copied all the files off it onto a folder on my Mac so I could use it to transfer some big files to my mum's laptop (Windows 7).
Having finished the job, I formatted the stick in OS X as FAT, but when I tried to copy my files back, I got an Error Code -36 when writing one of them. I tried formatting the stick in Windows 7 as FAT32, and got the exact same problem.
I then formatted it as Mac OS Extended in OS X (after doing a Verify & Repair), and this time the files all copied across to it perfectly. However when I plug the stick into Windows 7 now, it doesn't show up.
I tried formatting as FAT again in OS X, but again the files won't copy and give an Error Code -36
Any ideas?
Thanksmarkmc78 wrote:
I formatted the stick in OS X as FAT, but when I tried to copy my files back, I got an Error Code -36 when writing one of them.
Two things to try: (1) On your Mac in Disk Utility, verify that the "Partition Map Scheme" of the USB drive is set to "Master Boot Record". If it's not, repartition the drive to have that scheme. (2) Format that USB drive in Windows. -
System Preferences no longer stick after 10.10.1 update
I've upgraded from OS X 10.10 to 10.10.1 today.
The upgrade caused various system preferences to change, and now I cannot change them back.
While System Preferences.app seems to accept my changes, they are reverted after I quit and restart System Preferences.
For example:
Language & Region:
- I used to have various languages in the list of my preferred languages. Since the update, only German remains in the list. Adding other languages does not stick.
- My Region is set to Germany - English, which causes german text but english number formats to be used. Changing the number format to german does not stick.
General:
- When I click the scroll bar, this now causes the document to move by one page. I used to have the other setting (move to that location), but cannot reenable that.
- Windows are now closed upon quitting applications. I don't want this, but removing the check box does not stick.
Does anybody have an idea what the root cause may be and how to fix this?
With kind regards
Piers WalterBack up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Making a Windows 7 Installation USB Stick
This is a discussion of making a bootable Windows 7 Installation USB-stick Media. It might apply to making other USB connected "Disks" like Smartcards bootable too.
I recently had to do this (a Laptop with no build-in DVD drive and no USB DVD drive around). And it turned out to be surprisingly simple, using nothing but build in Windows tools from the Disk. I only found
this german langauge guide and nothing in english (but I might just have searched after the wrong terms, google has been wierd regarding langauge lately), so I thought I write it up (along with some problems I ran into).
Making a USB-Stick into a bootable Windows 7 (and propably Vista) Media is a 3 step process:
1. Create a Active, Primary, FAT32 Partition of 4+ GB on the stick
2. use bootsect.exe from Windows Disk to create the MBR and Partition Boot Record for that Partition
3. Copy all files from the Disk to said Partition
4. Test if it boots
Detail analysis:
Step 1 is so simple I doubt it needs explanations. Create enough free space on the USB disk (at worst delete all previous Partitions). Make a Priamry Partition of 4+ GiB. Mark it as Active. Format it in FAT32. The Guide used Diskpart,
but this step can be done with any Partition Tool under any Windows, Linux, UNIX or DOS.
While the choice of FAT32 seems a bit outdated, theye propably did not gave the relevant bootlaoder the ability to read NTFS. Or maybe they just though FAT32 is enough for a media that is mostly read. I have not tried what happens if I format it in NTFS, but
it might be possible.
Step 2 was the only tricky part. You need the programm "boot\bootsect.exe" from the Installation Media. It also must be run on a non-UEFI booted OS (otherwise it cancels out).
I had a Windows 8 on a new Laptop so I had a UEFI booted system. Luckily I also had a VMWare Windows 7 lying around. I just assigned the Windows 7 ISO image to the Windows 7 VM, then connected the USB drive to the host.
Once you have the USB stick in a a proper Windows mount the Parttion you created under 1 under any driveletter (should happen automatically under Windows), and open a console as Administrator (asumes DVD is drivletter is D: and the USB stick's partition
ins Driveletter E:):
//Go into the boot directory on the Install DVD
D:
cd boot
//You should see a command promt like "D:\BOOT>"
//Run bootsect.exe
bootsect.exe /nt60 d:
Step 3 is to either copy the contents of the DVD media (copy and paste) or the Image (Mount into Virtual DVD Drive and copy/paste, unpack ISO images contents) into the partition.
How does this compare to other Distribution ways?
To DVD:
There is no need for a DVD drive. Even if a bootable USB-DVD drive is avalible, the Stick or Card will only need only USB port (most USB drives need 2 Ports due the 1 Ampere energy need of the drives).
Flash Media has no seek times and much better throughput (the old weakpoint of any Disk and DVD/CD in particular)
A FAT32 partition is inherently writeable. So modifications to the "Installation media" like Implementing Service Packs and other Windwos Updates, Modifying ei.cfg/preactivation/setup answer files, implementing special Disk/RAID drivers into the Windows
PE or adding stuff that should be installed with Windows is easy (and do not requrie reburning a 4 GiB Image file).
Since it only needs a 4 GiB partition, on a big USB stick there would still be place for other Data Partitions
Since it relies on old techniques (Generic Bootloader + Active Primary Partition + partition boot loader), multiple Installation media on a big enough stick might be feasible (with a more advanced bootloader like GRUB). Have to test that part.
However, the cost/media is a lot higher then a DVD. So if you need multiple Medias it will propably be cheaper to use the old DVD approach.
Due to the needs of bootsec.exe, first creating the media can be more difficulty then just burning an image. But once it is bootable this programm is no longer needed.
To PXE/network Distrubution:
If you have the nessesary setup already (DHCP/PXE Server, powerfull network), the USB stick is likely inferior. The USB stick should beat a 100 MBIT Network easily, but will propably be beaten by a 1 GBIT Network. Network isntallation uses existing infrastructure
(that you need for other reasons anyway) so the cost per media is even lower then the DVD.
The PXE way also has even better modifyability - sending out different answer files or even automatically booting different images based on the Compuers MAC adress are tried techniques.
If you lack the nessesary setup, the USB stick is a lot easier to implement and a lot easier to transport.
Advanced things:
Need to check if the partition could be formated as NTFS. I prefer a Journalling Filesystem for my USB-sticks.
Need to check if using a advanced boot manager techniques (like Grub or modifciations to the BCD of the Windows PE) allows me to put multiple install media on one Stick (with one primary partition per "media"). Especially combining the x32/x86 and
x64 Windows Installation Media would be worthwhile. As would be inlcuding a Window 8 or Vista installation media.
Current Step 3 and 2 can propably be switched. I see no reason bootsect could not run from the USB stick as it runs from the DVD (it only accesses the MBR and
VBR of the Disk, areas not in use by Windows)
Steps 1 through 3 might be possible from the Windows PE environment. If so, only a computer with legacy BIOS boot would be nessesary (no actuall installation).
Windows 7 can be installed on a (U)EFI system, but I have not checked if I can use the boot from teh stick on such a Computer. Latest for Windows 8 Media UEFI compatibilty is nessesary.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.Advanced things:
Need to check if the partition could be formated as NTFS. I prefer a Journalling Filesystem for my USB-sticks.
Windows 7 can be installed on a (U)EFI system, but I have not checked if I can use the boot from teh stick on such a Computer. Latest for Windows 8 Media UEFI compatibilty is nessesary.
I converted the stick to NTFS using the convert.exe and it continued booting. So chances are high they only choose FAT32 in the example because no feature of NTFS was per nessesary in a "almost only reading" scenario like installation media.
The second part depends on the BIOS. I have a more advanced one where I can choose legacy boot options (like USB stick) in the boot option menu even when the default setting is UEFI, as long as I don't need Secure boot (wich I do not).
Another question arose: Windows 7 has the Kernel/BCD level ability to boot from .VHD Files. The only thing preventing version below corporate from using this feature is a license check that is run just before the login (so way after the booting has been
completed).
Starting with 3.0 Windows PE is based on the kernel of Windows 7. So the instlaltion system might have the ability to boot from .VHD too and might have no such check in place. If so, I could put both versions of the Windows 7 installer into .VHD, reducing the
need to have physical primary partitions for those.
Windows bootprocess vs. Linux boot process under BIOS:
The BIOS goes over all the boot media. If it finds one with a MBR, that one is executed and the BIOS part of the boot process is officially over.
-> Under Windows the MBR contains the "generic boot loader". A simple piece of code as old as BIOS (25 Years) that looks for the primary partition with "Active" Flag on "it's" disk. If it finds one, the Partition Boot Record of that parition is executed.
The MBR has done it's part
-> NTLDR (NT too 2000), this one reads the boot.ini file and gives/executeds apropirate options
-> BOOTMGR (Vista, 7), this one reads the BCD files
-> Since Windows 7 BOOTMGR can also chainload the Partition Boot Record that is inside a .VHD File
-> Wicher was used in Windows 3.X/95/98/ME
Higher versions can chainload lower versions, but must be designed for this and (re)installed in the proper "order".
The sometimes odd behavior that Windows 7 tries to keep 100 MiB in a seperate primary partition is there to have proper places for later additions to the BOOTMGR settings. Specifically it allows multiple BOOTMGR OS to use/edit the same BOOTMGR instace without
running into problems with "whose partition is active?" (since it is always the System Reserved one). It's not disimilar to having an extra /boot partition in Linux or how a GRUB's stage 2 works.
-> Under a typical Grub Legacy the MBR contains the Stage 1. It directly reads the Stage 2 from the proper partition/file system with a hardcoded path, but due to size limit of the MBR cannot do more. In some cases it starts a stage 1.5 wich has more
space to do work (63 sectors between MBR and first partition), but I never used this Setup
-> Stage 2 loads the Grub Configuration from the disk. From here it depends on what OS you want to boot.
-> For Linux or Unix the kernel is started directly.
-> Any Windows OS up to 7 can be booted using the chainloader command. For the OS this is identical to having the partition choosen by the Generic Bootloader.
While it can be chainloaded by the Generic Bootloader from the active primary partition, GRUB and thus Linux has no
requirement for any Primary Partitions. Stage 1 is designed to directly access the specific File System containng the Stage 2. In fact it does not even need to reside on the same disk (as the Generic Bootloader has to).
If one does not need the Active Flag to control the Generic Bootloader (because a proper Stage 1 is installed in MBR) it is adviseable to mark wichever Windows Partition is chainloaded as active (up to Vista at least I had very odd behavior if the Windows boot
partition was not marked active, down to randomly shredded Partition boot managers).
After running a Windows Setup usually the Stage 1 has to be restored, as Windwos Setup will always write it's Generic Bootloader in the MBR. In order to get "rid" of a Grub all one has to do is overwrite the MBR with the Generic Bootloader and set the active
flag properly.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively. -
USB Stick Won't Appear on Desktop or Disk Utilities
Hi there,
One of my USB sticks doesn't seem to appear on my iMac. I have looked in disk utility and it doesn't appear there so I can't format it, and I have plugged it into another Mac and have had the same issue.
My external hard drive still appears and continues to back up using time machine, and I have tried the other USB ports in case one was faulty.
Has anyone come across this? Any tips?
Thanks a lot.I have plugged it into another Mac and have had the same issue.
It is possible the stick has failed since you are having problems on 2 computers and not getting the correct response from what arthur suggested. -
1,1 running Lion with XP Boot (re-install and what should i use for recovery disk or usb stick)?
i am trying to give my 1,1 mac pro a little love and would like to keep this machine running lion. i also have a boot camp installation of XP on it.
1. can anyone give me instructions on how/whether i can basically do a fresh install of Lion on this machine and minimize the system so it is not cluttered up with all my previous software etc, etc while still maintaining the original XP boot camp partition which i really need to have?
2. can anyone clarify for me what i should have on hand /if/ i need to boot into recovery mode or some other safe boot mode? i recently ran into an issue where i may have had to use the old Disk Utility format function and there was a reference to booting using the DVD install disks. however i am really confused as to what i should have on hand. ALSO the last time i had to do something on this machine i was told to boot into the Recovery Partition and it appears for some reason (perhaps because i had a "non-standard" windows 7 boot camp installation on the drive at the time??) that there was no recovery partition created when i upgraded to Lion.
- /anyway/ i am finding that i have the two ORIGINAL install disks for the mac pro on hand, a Max OS X Leopard and a mac OS X Snow Leopard DVD on hand but i am thinking that i should be creating some kind of USB stick similar to the one i created with yosemite? actually, i am not even sure what this USB stick for yosemite is for but i guess i can use it to boot into safe mode or something?
THANKS for any help as i'd like to get this business under control a little better in case i have an issue.
i'd also like to install Lion so that there is a Recovery Partition if possible and i think this may be possible if i don't have the windows 7 partition in the machine when i do a fresh install. any help would be great. thanks.You have to go out of your way to build the Installer Disk yourself. But this tool makes it easy, and this site contains instructions:
http://diskmakerx.com
the bootable installer is basically to re-install the OS if i have to
Yes.
the recovery partition is somehow for fixing a problem
Recovery can go and get you the software and re-download it and start the Install, and allows the use of Disk Utility and can reset passwords.
or is there some overlap?
Yes. Both give you access to the Utilities that used to be on the Installer DVD. Disk Utility to Repair or initialize and a few other tools that can allow you to set up to install on an otherwise-bare disk or change your password.
is "Safe Mode" something completely different
Safe Mode is a way to start the fully-Installed Operating System in a special way. It first does one pass of Disk Utility (Repair Disk) against the Boot Drive. [Normally this would require booting from a different drive to make repairs.] Then it loads a minimal set of Apple-only kernel extensions, and uses a one-size-fits-all screen resolution. Then it demands your Username and password to proceed.
From there you can fix settings, use the Finder to add or delete things, and check operation with minimal extensions versus all your daily-use extensions. Very helpful for debugging extension conflicts and graphics settings problems, and fixing damaged settings. The next Restart builds a new extensions cache. -
Can I install Windows 8.1 as Bootcamp partition from OSX Mountain Lion using a USB stick?
I have the following:
Bootable USB stick with Windows 8.1 - 64 bit
MacBook Pro with Mountain Lion 10.8.5 - it's probably 3-4 years old.
The Bootcamp partition currently has Windows 7 installed.
I want to know whether I can install Windows 8.1 from a USB stick into a Bootcamp partition. Apple's article on the topic refers to Bootcamp 5.1, but my OSX install has Bootcamp 5.0 - I am assuming 5.1 comes with the Mavericks version. I don't want to upgrade to Mavericks because I am running out of space as it is on the OSX partition.
Thus my question. So can I?Your laptop has a DVD drive, right? If so you need to burn your ISO to a disc, will not work off USB
Maybe you are looking for
-
Changing the order for printing portfolio files in adobe acrobat 9 pro
Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro? The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order. This won't w
-
Hi Friends, My requirement is that when user Clicks on pushbutton in module pool screen,popup window with 4 radio buttons to be displayed.Once user selects the push button and said ok...Then Search help has to be displayed with Selection Criteria
-
CS4: conflict with third-party plugin
Hi We face the issue that our plugin conflicts with an existing closed-source plugin. We use a unique developer ID and I believe that all declarations in our plugin are correct. My question; how can I get indesign to yield more informative error mess
-
Blocking iMessages in Mavericks OS?
Can I block iMessages from a specific person with Mavericks operating system?
-
Hi, Why do we need Lumira Server, when we have the Lumira Desktop to build visualizations and import into Lumira Cloud and access it anywhere. What is the purpose of Lumira Server? Regards. Kumar