Stickies in dashboard revert to yellow when I restart my computer.
When I select a different color for the stickies on the dashboard, the color changes. When I restart my computer, however, all of the stickies have reverted to the original yellow color, but when I check in the i the color I selected prior to the restart is still checked. Any fixes for this?
No, you don't have a virus or other malware. Even though you don't say, I'm sure you are running Lion or Mountain Lion. This feature is known as resume. If you close all documents before quitting Numbers or Pages, you won't have them reopening when you launch the app again. If you don't want to have to close everything first try Mountain Tweaks. The option to turn off resume is at the bottom of the left-hand column under Lion. You can quickly close all open windows in an application by typing ⌘ ⌥ W (Command + Option + W) or hold down the Option/alt key while clicking the red close button. In Mountain Lion you can check a box in System Preferences > General to close all documents when quitting an application.
Similar Messages
-
Firefox kept trying to update v. 3.5.?.?, usually failing. So, I went to the website, then downloaded and installed v. 4. But, when I restart my computer, it reverts back to the old version, loses bookmarks added while using v. 4, and again tries to update v. 3.5. When I look in the folder which contains Firefox, "properties" says I have v. 4, even though what is appearing is not.
See:
* http://kb.mozillazine.org/Preferences_not_saved -
Flash quits working when I restart my computer and I have to uninstall and reinstall every time
HELP! I've been working on this for 11 hours non-stop!
I have Windows 7 64bit. I'm using the newest Firefox browser. I install Flash and it seems to sort of work. It is in my Control Panel Uninstall programs with the Flash icon.
When I restart my computer and go to the Adobe site it shows that Flash isn't working. It's still in the Control Panel Uninstall programs BUT it has no icon. So I have to uninstall it and reinstall it to use it.
When I go to any Zynga.com games and right click on the game window the Flash window opens but when I click on Settings it freezes and I have too right click and left click a lot for it to go away. So I can't allow the site to use 100% of Flash to run on the site. Once in a while if I wait a few minutes Settings will open and I set it to 100% but when I go back and look at it later it says I am using 0%.
I have Norton 360 and have turned it off and uninstalled and reinstalled repeatedly only to have the same problem occur.
Before I installed Windows 7 and had Vista Ultimate it worked better but still not as good as it should have.
Also in my Firefox plugins Shockwave is there but no Flash plugin is ever there with Flash installed or uninstalled. Should Flash be there and where did Shockwave come from? Firefox?
Do I need Shockwave for Zynga or Facebook games? Or at all for that matter. I'll install it for no good reason as long as it doesn't screw something up.
After 11 hours of this Adobe HELL I am burnt! So ANY help is greatly appreciated!
Thanks to anyone who can help me. THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Replied in your other post.
-
I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!
Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update. -
How do I disable Firefox from starting automatically when I restart my computer
When I restart my computer (MacBook Pro) Firefox (18.0.2) automatically starts up.
See:
* https://support.mozilla.org/kb/Firefox+launches+automatically+when+your+computer+starts -
After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.
Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
I just purchased my macbook pro yesterday and the update combined it downloads but when i restart the computer it says something went wrong and it won't work i don't know where to start to download this update
Try here:
http://support.apple.com/kb/DL1524 -
When I restart my computer, preferences are reset?
When I restart my computer after updates/etc., my dock is reset to include default apps, while removing custom folders/apps or "forgetting" (shown as "?") the location of certain apps. This happens regardless of whether I accept or deny a keychain-looking request on boot, pre-login that asks for admin confirmation to "modify" settings or so. This is annoying because i have to drag all unwanted apps off of the dock. It also resets all the desktop size/grid/alignment settings.
My harddrive was replaced by a certified Apple Technician and is now a solid state drive. The computer finds the startup disk "f", which shows up under the harddrive in disk utility. OSX.8.1, 4GB RAM, these updates on a mid-2009 13" Macbook.
Side note,
Microsoft Word also seems to be negatively affected by OSX.8. Autosave doesn't appear to work? It consistantIy tells me that autosave or autorecovery have failed. I have the latest MS Office and have google to try and solve--some files are suddenly "read only", and older .doc files cannot be opened. I have old reference data and passwords in some of these files! Losing them is not ok.I tried the disk verify/repair, but the same problems persist. Also ran all available udpates.
The warning dialogue/password prompt at boot asks to "modify network configuration". It seems unnecessary for it to always come up? Probably not related to the desktop/dock issues but confusing too. -
i have downloaded the updates for my macbook air and when i restart the computer it says that they can not be installed because and error occured i have tried 3 times
A common hangup for updates is corrupted file permissions.
Using Disk Utility, perform a Repair Disk Permissions on your main drive, then re-attempt the update. -
I am unable to open Safari. It was working yesterday before I installed the update. The update seemed to be automatic when I restarted my computer. I am running 10.9.5. I don't want to lose my contacts, bookmarks etc if I have to delete the app. Any suggestions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Losing iTunes library when I restart my computer
I looked and looked but didn't really see any discussions that solved my dilema. My problem is that when I retart my computer, I lose my iTunes library and everything else. It goes back to its default settings. What am I doing wrong? It really ***** to have to import hundreds of songs and re-do my playlists everytime it restarts. Any help would be greatly appreciated!
Have you tried reinstalling itunes? I think that when you restart your computer your files are lost because they aren't completely saved to the hard drive. Make sure the files are saved under itunes on your system before restarting.
Hope this Helps! -
Sometimes my maps and documents on my desktop are rearranged when I restart my computer
Sometimes my maps on my desktop are rearranged on the desktop when I restart the computer. Is there A way to go back to the original display and sort order?
That is a feature. Desktop folder acts as a holder folder.
When trouble shooting we move files to Desktop to keep the contents of the file as it is. -
My iPhoto keeps opening when I restart my computer
My iphoto keeps opening up when I restart my computer. Is there anyway for me to turn this off?
Sure
Do you have any FAT strorage devices attached to it? Is so unmount them or in the iPhoto preferences set actipon when a camera is connected to do nothing
Do you have iPhpoto set to launch on start up? Is so right click on the iPhoto icon in the Dock and under options uncheck that option
Do you have iPhoto in your list of programs to launch at login in the users and groups system preferences? If so then remove it
Was iPhoto running when you shut down and do you have the option checked to restart all programs ? If so quit iPhoto before shutting down or uncheck that option
LN -
My macbook air wont change songs for iTunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minutes then stop working again. Did i change a setting? what should i do?
Hello King Cutway
If you are having issues with the functions keys, then check the settings in System Preferences > Keyboard and look to see if Use all F1, F2, etc. keys as standard function keys is unchecked so you can use it properly.
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/HT1296
Regards,
-Norm G. -
my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?
Have you just tried repairing with Disk Utility?
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Maybe you are looking for
-
Changes are not reflecting in other users
HI all it's urgent One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction with regards vinod
-
Total records in database equals -1?
I have some code, accessing an Access database. As part of development I need to see how many total records there are, so I have the code I took off of bindings in CS 5: <p align="center">/<%=(Recordset1_first)%>/<%=(Recordset1_last)%>/<%=(
-
Wrong add_child info at table actions in Querybuilder at Apex 4.x
I found it in Apex4.0 (but not reported) and found same behaviour in Apex4.0.1 If you use qurybuilder for joined tables (create sql) you choose a table then click on "table actions"box and you will get add_parent, add_child. This works fine for DEMO_
-
Dear All, I have created a process order and the status of the order is REL. When i run the WIP KKAX, the value of WIP is calculated. While doing the settlement of the process order, the system responded that there is no accured amount, settlement
-
Splash screen when application packaged with captive runtime (Windows)
Is there any way to show your applications splash-screen while the Captive Runtime loads? After packaging my air app with captive runtime on windows the app takes a few seconds extra before showing on the screen. The taskbar-entry appears fast, but t