Sticking notes problem - is this a bug? Is there a workaround?
Hi
does anyone have any advice for stopping "sticking midi notes" when played using a midi keyboard?
I think the instrument my friend has been having trouble with is specifically the evb6 and notes sticking - with the only way for him to remedy the situation is by starting and stopping the transport play.
He has tried two midi controllers: an old midi keyboard and a yamaha 1100. Both recreate the issue.
I have tried replicating it on my setup with an oxygen 8 - can't seem to make notes stick the way he describes.
He wants to use Logic live - so obviously this would be unacceptable. I'm gonna take a look through his Logic setup when i see him and wanted to know if anyone has any advice or tips on this one.
Cheers
Rounik
p.s i should mention he is on a macbook pro - logic pro 7.2.x (i'll find that out) and os 10.4.8 i think.
Message was edited by: rounik music
rounik,
don't have to read your post, as title says it all.
got the same prob here from day one.
given up on it.
also logic doesn't handle mono mode - same key/note repeated with overlaps.
my old roland midi sequencer did this properly over 15yrs ago.
best.
DR9.
Similar Messages
-
JBCL Field Control problem, is this a bug??
Hi,
When I use a JBCL Field control I get errors.I have already
developed an application using JDeveloper 1.02.Now I am using
2.0.184 beta.When ever I use a field control I get this error
even though i dont assign it to a dataset and column name.If i
remove the field control the program compiles and runs perfectly
this is the error mesg
at com.sun.java.swing.JComponent.paint(Compiled Code)
at com.sun.java.swing.JComponent.paintChildren(Compiled
Code)
at com.sun.java.swing.JComponent.paint(Compiled Code)
at java.awt.Container.paint(Compiled Code)
at sun.awt.windows.WComponentPeer.handleEvent(Compiled
Code)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Container.dispatchEventImpl(Compiled Code)
at java.awt.Window.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.run(Compiled Code)
Exception occurred during event dispatching:
java.lang.ClassCastException: borland.jbcl.control.FieldControl
at
com.sun.java.swing.plaf.metal.MetalTextFieldUI$TextFieldBorder.pa
intB
order(Compiled Code)
at com.sun.java.swing.border.CompoundBorder.paintBorder
(Compiled Code)
at com.sun.java.swing.plaf.BorderUIResource.paintBorder
(Compiled Code)
at com.sun.java.swing.JComponent.paintBorder(Compiled
Code)
at com.sun.java.swing.JComponent.paint(Compiled Code)
at java.awt.Container.paint(Compiled Code)
at sun.awt.windows.WComponentPeer.handleEvent(Compiled
Code)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Container.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.run(Compiled Code)
I am not able to run the appln that I had developed earlier due
to this.Is this a bug????
I would be thankful if I get a reply for this at the earliest
Ram
nullRam,
You are raising an important issue. I will answer this question
in a new thread so that more people will read it. The subject
will be: "Problems with upgrading version 1.x applications (using
JBCL)"
Thanks.
Ram (guest) wrote:
: Hi,
: When I use a JBCL Field control I get errors.I have already
: developed an application using JDeveloper 1.02.Now I am using
: 2.0.184 beta.When ever I use a field control I get this error
: even though i dont assign it to a dataset and column name.If i
: remove the field control the program compiles and runs
perfectly
: this is the error mesg
: at com.sun.java.swing.JComponent.paint(Compiled Code)
: at com.sun.java.swing.JComponent.paintChildren(Compiled
: Code)
: at com.sun.java.swing.JComponent.paint(Compiled Code)
: at java.awt.Container.paint(Compiled Code)
: at sun.awt.windows.WComponentPeer.handleEvent(Compiled
: Code)
: at java.awt.Component.dispatchEventImpl(Compiled Code)
: at java.awt.Container.dispatchEventImpl(Compiled Code)
: at java.awt.Window.dispatchEventImpl(Compiled Code)
: at java.awt.Component.dispatchEvent(Compiled Code)
: at java.awt.EventDispatchThread.run(Compiled Code)
: Exception occurred during event dispatching:
: java.lang.ClassCastException: borland.jbcl.control.FieldControl
: at
com.sun.java.swing.plaf.metal.MetalTextFieldUI$TextFieldBorder.pa
: intB
: order(Compiled Code)
: at com.sun.java.swing.border.CompoundBorder.paintBorder
: (Compiled Code)
: at com.sun.java.swing.plaf.BorderUIResource.paintBorder
: (Compiled Code)
: at com.sun.java.swing.JComponent.paintBorder(Compiled
: Code)
: at com.sun.java.swing.JComponent.paint(Compiled Code)
: at java.awt.Container.paint(Compiled Code)
: at sun.awt.windows.WComponentPeer.handleEvent(Compiled
: Code)
: at java.awt.Component.dispatchEventImpl(Compiled Code)
: at java.awt.Container.dispatchEventImpl(Compiled Code)
: at java.awt.Component.dispatchEvent(Compiled Code)
: at java.awt.EventDispatchThread.run(Compiled Code)
: I am not able to run the appln that I had developed earlier due
: to this.Is this a bug????
: I would be thankful if I get a reply for this at the earliest
: Ram
null -
We have 2 iPads (2nd and 4th generation). Both have been air printing without trouble to our HP 6700, which is on Apple's list of supported printers. Both iPads were updated to OS 6.1 last night. Now when attempting to air print something, the HP 6700 does not appear on the printer options list of printers to select from. Interestingly, the other supported printer, and HP 8500, does show on the list, but when attempting to air print to it, this results in an error message "An error occurred printing this document." This error happens in multiple apps that support air printing. Is this a bug in iOS 6.1?
The printers are visible in AirPort, AND I can print from a computer (MB Air and a Dell Win7) to the HP 6700 without problems, but no longer from the iPads. What gives? I have powered down the HP 6700 and back up. I even restarted the AirPort Express. The problem persists with printing from the iPads.Hi, everyone, I yesterday bought a HP 6700, after setting everything like supposed to be, I could scan to computer and by eWeb service but not Print directly from iMacs (10.7.5 and 10.8.5) or iPhone, after installing things as suggesting here and HP support site, I decides to called HP support, and they do something, first they force to eliminated all printers from Print & Scan pannel (system preferences) by right-click over printer list on that pannel, and then create the printer from the IP address instead of by default selecting it from list (bonjour), that make the iMacs start printing fine. But iPhone still not. Then HP support suggested that maybe my router didn't support bonjour or it was not activated, so I tried with my phone company with no luck, since they told me that they never hear about this and that my router didn't support it, even if I think they didn't know, period. So I decided to create a network over my regular network, using an Airport Express, I create a new network (connected the Airport through ethernet cable to the router), and then place the iMacs and iPhone over the new network, restarted printer and iPhone, and then finally the iPhone could print on the HP 6700.
So I suggest you try first force the printer using the IP address, thaht solved the problem with iMacs, and then if you can, used another router cause maybe the one you use have "issues" with bonjour/airprint etc....
Hope this help. -
Multiple Mail Forwards not marked-is this a bug?
This week I noticed, almost by mistake, that users can combine multiple inbox messages into one forward. That's a handy, Good Thing.
For instance, if I have two replies to a question I sent to someone, and I want to forward both to someone else, I highlight both replies in the message list pane, click forward, and a new message window comes up with both messages quoted in the new message. Still, good.
But after sending, the curvy arrow forwarded mail icon does not appear next to the two messages, as it would if I forwarded them in two separate emails. Not good.
Is this a bug? is there a way to make the combined forwards reflect that they've been forwarded?
Thanks!
daveIt does not look like timezone issue because of '-u' option for 'date'.
From "man date" (GNU coreutils 8.5 February 2011):
%W week number of year, with Monday as first day of week (00..53)
However I get:
date -u +%W
00
Good that
info coreutils 'date invocation'
has valuable addition:
Days in a new year preceding the first Monday are in week zero.
So, it registration does not calculate correct week number. They probably do not use posted expression, or their tool uses is of different version. Probably this issue happens only at the beginning of new year before first Monday.
Still this could be a hidden quiz for new users... -
How do I get Adobe to fix this bug/Is there a workaround?
Searching the internet shows that lots of people have the following problem:
when using Adobe products on Windows 7 64bit with Outlook 2013.
How does one get a 'fix' created for this, or is there a workaround? I have seen a workaround that involved editing the registry, and I've tried it, but it doesn't work properly.
Any help appreciated.
Thanks,
PBThank you for your reply.
This is Acrobat 9.5.5. I understand that 11.0.1 may be required to support Office, but accepting the 'default email' program is a basic function.
That said, I imagine it is not worth reporting a bug then, as the repsonse will be 'upgrade to the latest version'.
PB -
Problem with this version of DropDownLists, there is no removeItem function
Dear All,
I have a problem with this new version of the DropDownLists, in previous versions you had the removeItem function and others, but now you just have clearItems and addItem.
I have a list of elements in which a customer will be able to link and delete any element that he wants, I had selected a DropDownList to do that but considering that the removeItem function is not present I dont know how to do that...
Does anybody know how to delete a element in a dropdownlist?
If not, the solution will be to get all the elements in an array and reload the list but without the element "deleted" . Does anybody knows how to get all the elements of a DropDownList?
Thanks
Ruben.If you have a drop-down list named myDropDownList,with SOMExpression
Form.page1.myDropDownList then you can remove the
element at position
i using the following code:
var myItems = xfa.form.resolveNode("Form.page1.myDropDownList.#items");
myItems.nodes.remove(myItems.nodes.item(i));
Good luck. -
When I go into contacts and try to SHARE it via messaging, it doe snot SNED. It lets me go though the motions and hit send but never SENDS. Is this a bug that can be fixed?
No solution here, but another instance of the same problem...
I just got a Brother HL2270DW, great little laser printer. Running Lion 10.7, but I can't seem to get the driver's installed. Any help is much appreciated...
When I install the drivers that come on the CD, or downloaded from Brother, and then try to add the printer in System Settings, I get a popup that says "Software for this printer is available from Apple, would you like to download it ?".
If I click "Cancel" then nothing gets installed. If I click "Download and Install", then after a lengthy download process, I get another popup that says "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software"
Ok, now what ?
Thanks...
Tom -
Em bug - is there a workaround?
Hi
I'm using Dreamweaver CS3 for Windows.
On the Insert + Text toolbar, there is an "I" button and an
"em" button; but
*both* buttons insert <em> tags!! The only way I have
found to insert <i>
tags is by working in the code window and typing the tags
manually, which
rather defeats the object of using a wysiwyg editor. Is there
any workaround
for this bug?
The same applies to the so-called "b" button on the toolbar,
which inserts a
<strong> tag instead of a <b> tag.
The point being that <em> and <strong should only
ever be used for emphasis,
as they cause screen readers to change their tone of voice;
they should
never be used for purely presentational purposes, so this bug
is quite a
serious one.
DaveThanks Thierry, that's very helpful. You seem to be backing
up and
reinforcing my statement that Adobe's default setting for
Dreamweaver is a
very bad one, and that it encourages exactly the sort of bad
practice that
has so far prevented screen reader manufacturers from
supporting em and
strong properly.
In the meantime, I've implemented Danilo's workaround, so
that my site at
least can use those tags as they were intended to be used.
Dave
"Thierry" <[email protected]> wrote in message
news:[email protected]...
| "Dave Rado" <[email protected]> wrote in
message
| news:[email protected]...
| > Hi Thierry
| >
| > "Thierry" <[email protected]> wrote in message
| > news:[email protected]...
| >
| > | HTML elements have a semantic purpose and that's
what they should be
| > used
| > | for. For their meaning defined by the W3C.
| >
| > I guess, but in this specific instance I don't really
see the purpose of
| > it.
| > As I say, I had *thought* that its purpose was to
allow screen readers
to
| > distinguish between purely presentational
italicisation and bolding, and
| > text intended to be emphasised or read more loudly.
|
| But that's a problem with screen-readers (SR) vendors, not
with the
elements
| per se.
| As a side note, may be vendors chose not to "support"
em/strong because
they
| found that too many documents on the web were using these
elements poorly
| (for the wrong reason). Imagine a SR user landing on a page
where someone
| has used both to "style" (in bold/italic) most of the text
on his page
| (there are still a lot of these out there).
| May be that's also why support for Definition Lists is
poor, because they
| are (were) not very common in documents.
|
| > | Note that the default styles sheet of most visual
browsers will style
| > these
| > | elements to carry this meaning. Screen-readers are
not the only UAs
out
| > | there to benefit from semantic mark-up.
| >
| > Now you've lost me. Are you saying that in my browser
I should be able
to
| > tell the difference on screen and without looking at
the source between
| > text
| > marked up with <b> and with <strong>, and
between text marked with <i>
and
| > with <em>? Because I can't.
|
| You're right, I was talking about HTML elements in general,
not the 4 you
| mention in this thread. But again, this "default styling"
is a vendor's
| choice and we could imagine that visual browsers would
render these
| differently (not the "i" and "b", but the "em" and
"strong") depending on
| "lang". As "we" associate emphasis with boldness and
italic, but it may be
| different in another "culture" (see Internationalization
and
localization).
| In any case, if we write markup using the proper
vocabulary/grammar we can
| only hope that some UA will take advantage of it (I believe
decent SEs do
| that already).
|
|
| --
| Thierry
| Articles and Tutorials:
http://www.TJKDesign.com/go/?0
| --
| Keep your markup *clean* with these DW extensions and
scripts:
|
http://www.divahtml.com/products/scripts_dreamweaver_extensions.php
|
| -
HT201071 Help! Mavericks will not recognize my Canon 8400 scanner--is there a workaround?
Help!
My Imac 10.9.1 will not recognize my canon8400 scanner! Is there a work-around? Canon no loger provides software or drivers for Mavericks.I was looking here to post my problem with the 7350 and lo and behold, someone else has the same problem. I have gone through a significant amount more trouble shooting than the original poster with no positive results. The printer worked fine until I upgraded from OS 10.3 to 10.4. Since then I have been unable to print at all. I tried to install the driver via the disk. I tried to download the updated drivers from the website. I have spoken with HP tech support ad nauseum about the issue without any luck. I downloaded the latest GIMP-print version, the driver was not in there. I downloaded GhostPrint and Foomatic, the driver finally appeared in a list as an available selection, but the printer came up with GenericClass:waiting for device. I have used the HP util to install. I have installed via the Printer Browser (printer is connected via USB, direct, no hub). I have gone into the advanced feature of the Printer Setup Utility and add the printer this way with the same results. The printer works on the PC machine that sits on the adjacent desk. I am at wits end! I am this close from going "Office Space" on this machine and buying something else!
Any other thoughts would be greatly appreciated.
Brian -
Could not register -- is this a bug or a feature?
On "2012-01-01 12:20" the answer which I was getting for
What is the output of "date -u +%W$(uname)|sha256sum|sed 's/\W//g'"?
on my system was different from what was expected by registration.
I replaced your expression with:
echo 52Linux|sha256sum|sed 's/\W//g'
and finally was able to register. Looks to me like a bug in registration.It does not look like timezone issue because of '-u' option for 'date'.
From "man date" (GNU coreutils 8.5 February 2011):
%W week number of year, with Monday as first day of week (00..53)
However I get:
date -u +%W
00
Good that
info coreutils 'date invocation'
has valuable addition:
Days in a new year preceding the first Monday are in week zero.
So, it registration does not calculate correct week number. They probably do not use posted expression, or their tool uses is of different version. Probably this issue happens only at the beginning of new year before first Monday.
Still this could be a hidden quiz for new users... -
Folder contents not displayed - Is this a bug or a feature?
If I import a complete folder structure from my harddisk (referenced file mode), I get a neatly reproduced folder structure in the Aperture project window. However, if I click on of the folders, no pictures are displayed in the Aperture browser. Apperently, you have to click on the automatically created albums within the folders to see the pictures.
Am I doing something wrong or is this (another) badly implemented feature of Aperture?Feature. But not a very good one.
-
Our application uses below snippet of Flex 4.5 sdk code for detecting flash players :
var camera:Camera = Camera.getCamera();
if (camera) {
camera.setMode(640,480,60,true);
camera.setQuality(1000,10000);
videoDisplay.attachCamera(camera);
else {
Alert.show("No Camera found with your computer");
Above code is fine for the Logitech webcam which am using, We have a requirement to detect Canon EOS digital cams to be recognized as well to detect with the flash player.
but its not recognizable in flash player.
Any help is appreciated!That connection is supported for tethering....
Barry -
File Locking!!! Is this a BUG or there is something wrong in my code.
In new JDK v 1.4. new means of file locking are introuced, and it seems it is a little bit buggy yet (or maybe this one isn't a one). though it's better than nothing :)
here is 2 classes. first locks a file, the second attemts to change it.
import java.io.*;
import java.nio.*;
import java.nio.channels.*;
class FileLocker {
static File targetFile = new File ("D:\\Java",
"manual.chm");
public static void main(String[] args)
throws Exception
RandomAccessFile fin = new RandomAccessFile (targetFile, "rw");
FileChannel fChan = fin.getChannel();
FileLock lock = fChan.lock();
// to let other process to attempt to change the same file.
Thread.currentThread().sleep(100000);
lock.release();
fChan.close();
fin.close();
}and the other class
import java.io.*;
import java.nio.*;
import java.nio.channels.*;
class FileWriter {
static File targetFile = new File ("D:\\Java",
"manual.chm");
public static void main(String[] args)
throws Exception
// this is better/more secure way to access files.
RandomAccessFile f = new RandomAccessFile (targetFile, "rw");
// next line deletes the file content even if file locked.
// FileOutputStream f = new FileOutputStream (targetFile);
//--this parts is not needed as the problem is in first 2 lines
FileChannel fChan = f.getChannel();
if (fChan.isOpen()) {
System.out.println("File is Opened, can't write");
} else
f.write(-1);
}so when i use FileInputStream for open stream to write,
constructor deletes the targetFile (makes it size equal to 0)
at once i create new FileInputStream object. Since, when i
use RandomAccessFile to open stream for writting nothing happens.
after that, f.write (-1); throws exception regardless the way the
uoutput stream was created.
So i think there is some problem in FileInputStream class' constructor.OK, I know you mean FileOutputStream instead of FileInputStream in the above message. Looks to me like you've discovered a bug in the way Java is locking the file - locking the whole contents of a file (using the no-args lock or tryLock methods) doesn't prevent other programs, including Java, from overwriting some, if not all, of the file. Note that this occurs even on Windows 2000, where exclusive locks appear to be well supported.
I've found a similar problem where saving from Outlook appears to zero the whole of the locked file. Saving from other programs that are a little more careful, such as XEmacs, appears to only (!) truncate the file to 0, as the FileOutputStream does.
From what I can tell, in JDK 1.4.2 RandomAccessFiles respect each others' locks, but nothing else does. -
Seems to be any page with these characters.
This happens when the website is viewed with the wrong character encoding.
Try view > Character encoding > UTF8 (or some others) -
i purchased music from itunes and now itunes will not open. how do i get it back??
Hmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now?
Maybe you are looking for
-
Create another purchase order for a material ordered in full
Hello friends, I have a little MM question for you. I've created a purchase requisition with a material A and quantity 100 UN I've then created a purchase order in reference to this PR. This PO has been released. Is it possible, in standard SAP, to c
-
Day/Week view problem with times not showing
When I view the Day or Week option I do not get the times listed. Where the times should be it has "Sat PM" and "Sat AM" (the AM and PM are in the right place but all the times have been replaced with "Sat"). I have trashed all my plist files and sta
-
In updating iPhoto 7.1.5 to 9.4.3 I have four different Libraries. Is there a problem in updating all four Libraries from 7.1.5?
-
Acrobat X Pro won't save document b/c it thinks a file is already open, but it isn't
I get an error message when I try to save a pdf. It says that it couldn't save the file because it is already open, but there's no other pdf file open. What is causing Acrobat to think that more than one file is open when there is only one file open?
-
Hi all, I made some changes in a mapping. I validated it and checked it in succesfully. When running the task in the dac, it gives me a unknow error. So i ran the workflow in the workflowmanager to see wich errors and warning he come up with. The map