Sticky: Bios & Startup Issues - Premature CMOS 2032 Battery Failures

Symtoms:-
Quote
DolphinBay
I am unable to save any BIOS updates.  I have tried to update the BIOS to v1.4, only to have the same problem.  If I make any changes to the BIOS information, the system will either A) Hang on F10/Save Changes, or B) if it does Re-POST the information, ALL of my changes are lost.
Neo4 Platinum (7125) BIOS Issues - BIOS Won't Save Changes 
tarheel  - System worked fine for two weeks then one morning - NO Boot. No Beep just the four red LED's on the D-Bracket
Solution:-
Quote
tarheel
If you haven't already done so please replace the CMOS battery asap. Then let us know how it works. I have had similar problems and the battery is the secret.
See also Premature CMOS 2032 Battery Failures  The reason for the failures is unknown at the minute.

Here are some of the Forum's references to CMOS Battery failures...
Please post results of any correspondence with MSI Tech Support concerning this problem so we can share the info.
mbga9pgf
https://forum-en.msi.com/index.php?action=profile;u=68466
mbga9pgf
https://forum-en.msi.com/index.php?action=profile;u=67074
tarheel
https://forum-en.msi.com/index.php?action=profile;u=65599
Heresy
https://forum-en.msi.com/index.php?action=profile;u=68531
tarheel
https://forum-en.msi.com/index.php?action=profile;u=65599
DolphinBay
https://forum-en.msi.com/index.php?action=profile;u=68451
Supershanks
https://forum-en.msi.com/index.php?action=profile;u=48465
Bob...

Similar Messages

  • Premature CMOS 2032 Battery Failures

    There have been many reports in this forum lately concerning premature CMOS 2032 battery failures.
    If there truly is a common CMOS battery problem with MSI systemboards
    we need to start to find the solution by identifing what vendors battery is failing and on what boards.
    My mobo is MSI K8N Neo4 Platinum (G52-M7125X1)
    My original CMOS battery was a KTS Lithium CR2032
    It lasted about 1 month then the systemboard failed to POST.
    I replaced it with a Energizer Lithium 2032
    It has worked for a week so far.
    The 2032 is a Lithium-Manganize Dioxide 3.0 Volt Button Battery.
    It is designed not for recharging.
    Life expectancy is least 2 to 4 years
    A new 2032 battery unused and right out of the package measures 3.26Volts DC.
    The new 2032 battery in the motherboard with AC power on, measures 2.97 Volts DC.
    A defective KTS CR2032 battery out of the motherboard for days measures 2.97 Volts DC.
    A defective KTS CR2032 battery in the motherboard with AC power on measures 1.41 Volts DC.
    I used a Fluke Series 77 Digital Multimeter for the measurements.
    My Phoenix-Award BIOS Version 1.4 - PC Health Status of the good Battery = 1.66 Volts
    I have no idea what that means other than the BIOS is not reporting accurate battery voltages.
    If you just have to know all there is to know about batteries try these sites:
    http://www.buchmann.ca/
    Energizer Lithium Photo/Coin Application Manual
    http://data.energizer.com/PDFs/lithiumcoin_appman.pdf
    Energizer Lithium-Manganese Dioxide Battery Datasheet
    http://data.energizer.com/PDFs/lithiummangdioxide_psds.pdf
    Hope this helps...
    Bob...

    Here are some of the Forum's references to CMOS Battery failures...
    Please post results of any correspondence with MSI Tech Support concerning this problem so we can share the info.
    mbga9pgf
    https://forum-en.msi.com/index.php?action=profile;u=68466
    mbga9pgf
    https://forum-en.msi.com/index.php?action=profile;u=67074
    tarheel
    https://forum-en.msi.com/index.php?action=profile;u=65599
    Heresy
    https://forum-en.msi.com/index.php?action=profile;u=68531
    tarheel
    https://forum-en.msi.com/index.php?action=profile;u=65599
    DolphinBay
    https://forum-en.msi.com/index.php?action=profile;u=68451
    Supershanks
    https://forum-en.msi.com/index.php?action=profile;u=48465
    Bob...

  • Re: Premature CMOS 2032 Battery Failures

    Hi,
    I have the problem with the CR2032 batteries dying on alot of 7F2WE 1G5D-OC-LF motherboards from Jetway.  Has anyone seen that?
    I measured and replaced batteries on the units a week ago.  The all read 3.25V to 3.3V.  I checked them all today and they were between 1.5V and 2.9V.  This is a serious problem for me since the product I make uses this motherboard and depends on the CMOS settings.  There seems to be no way for me to garantee that my product will actually work when it gets to the customer
    Don

     I would suggest you go to Jetway with your problem. This not a general forum and is for MSI products.

  • CMOS Errors/ battery failure in a Satellite L45

    I have a Satellite L45-S7423 laptop that is approximately 1.5 yrs old.  To give a bit of history on this baby..a week before the warranty ran out, the computer stopped working so we took it in to be repaired and it got a new motherboard and I believe power supply.  
    Fast forward 6 months to now, and as of last night I have started getting a black screen on boot up that goes to American Megatrends.  There are a bunch of self checks (I assume thats what they are) check out as ok and then it beeps, and goes to a second page where at the bottom it says "CMOS battery low, and something about the date and time not being set.  I have options for F1 to load defaults and F2 to enter set up.  Pressing F1 loads Vista properly.   The computer now thinks it is permanently March 4 2008...but the time runs as you would expect.  It just is in accordance to either 11:00 or 12:00 when I reboot.  
    I have noticed today after the reboot, that my antivirus vault settings have now been lost and I also started having issues with opening websites (security certificates not valid so it says or it completely blocks a regularly used site from opening).  Since the AV isnt working properly anymore I disconnected from the wireless network I use and turned off the wireless capability.
    I run this computer almost non-stop, it has a chill pad after the October issue, and is updated regularly.  I do run down the main battery at least once or twice a week and recharge it completely.  Most of the time the laptop is on AC power though.  This issue came up after it was unplugged during house chores and my husband and I both forgot to plug it back in.  At most it was unplugged for a little over 2 hours.   I plugged it back in for 24 hours, and the most recent reboot still brings up the CMOS message.  There was an SD memory card in the card reader when I rebooted which I had forgotten about.  The only other oddity is that these problems started after a windows update ran on 3/13. 
    What can I do for this?  Is it something I can fix by replacing the CMOS battery? It is NOT under the main battery where it was suggested to me that it might be....does this mean its on the motherboard?  If I press f2 for set up, what will happen? I also have a prompt to press f12 for BBS POPUP.  Thanks for your help and time.  
    Solved!
    Go to Solution.

    OK, I attempted to disassemble the laptop following the "destructions" that were provided in an earlier post.   This portion of the project went extremely well...the directions were really easy to follow.  
    The bad news is as follows....  I found the CMOS battery.  Either Toshiba, or the manufacturer of the mother board, american megatrends, soldered the stupid thing to the friggin motherboard.  I realized that this is above and beyond my level of skill, so I ran down the street to a small computer repair shop nearby and swallowed what little pride I have left.   I asked them if in fact my suspicions were correct in that the CMOS battery is soldered to the motherboard and they looked at it and went....EWWWW.  
    I truly appreciate their honesty b/c they wont even touch this because they do not want to fry the motherboard.  They reccommend that I contact Toshiba at this point.  I will keep these folks in mind if I need computer repair work done in the next few years...
    The experience was not a total loss to me though, because I now have a very good working knowledge of what different things look like in the laptop.  Even better, I put it back together and everything that did work, still works...haha.   One thing I did notice is that the repair place failed to replace all the screws...
    I appreciate all the advice.  I did try taking the laptop battery out and running the computer for several days on just AC power...in 5 days it went from March 4, 2008 to March 6, 2008.   I will post an update when I hear from Toshiba...

  • Cisco Server VCS C220 M3 Server BIOS password issue

    We have a Cisco Server VCS C220 M3 Server BIOS password issue.
    We needed to turn on Bit locker in the Cisco Server VCS C220. To do this we needed to create an administrator password for the BIOS to turn on trusted Platform Module (TPM). After we set up the administrator password and turn on Security for TPM. We were prompted for the administrator password. It would not let us log in with the administrator password that we created for the BIOS. In the next few days we received a BIOS is corrupted screen (BIOS Flash Image Corrupted *****).We follow procedures to recover the BIOS with the USB stick with recovery .cap file in the root folder. We tried reseating the jumper pg. 35 of the Cisco Server VCS C220 M3 Server of the Installation and Service Guide.
    http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/C220.pdf
    We were able to bring up the server, but we are still not able to get pass the Admin password issue. We tried to clear the CMOS header with Header J37 page 2-18 but we had no success with clearing out the password prompt. Figure 2-6 Service Header Locations shows the J41 BIOS RCVR boot and J37 Clear CMOS.
    Can anyone provide us documentation of where the pins are located on the motherboard to clear the BIOS password? We are looking for more of a detail picture of the pins please. The documentation is only showing a basic diagram of the header locations.

    You need to look at the CUCM logs for further info on what might have happened, and to make sure your servers are fit for the amount of users, devices, etc. you have in your environment.

  • P45 platinum bios/oc issues / Click bios info

    damn board is annoying me, it's currently running bios 1.7b9 but it's being a twit, firstly getting it to run the memory at 1066 (I've got 2*2gb kingston hyperX pc8500) is proving really difficult yet it was easy on my previous gigabyte p35 board. The only success I have had so far is to knock the multi down to 11 from 12.5 and thats got me fairly close, cpu is an E5200 btw and currently at fsb of 341 with the ram at 511 , ram voltage doesn't have any effect though I haven't messed with the finer voltages which are on auto
    more annoying is the fact that it will do the power up / power straight back off thing 2 or more times when switching on before staying on yet is completly stable when it's on, also it seems to have trouble with the time which keeps changing when powered off, bios battery is fine and I've cleared the bios several times including with the battery removed
    I'm putting the time and possibly the power up issues down to the bios version as it was fine on the old 1.6, but is there any other bios between 1.6 and 1.7b9 that would be better to use or shall I just go back to 1.6?
    also this Uefi "click" bios which seems rather secretive and mysterious, noticed that there is one available for the P45 platinum but there is absolutly no info on it, has anyone tried it and is it worth me trying it?
    tia   

    Quote
    firstly getting it to run the memory at 1066 (I've got 2*2gb kingston hyperX pc8500) is proving really difficult
    Try:
    - DRAM Voltage = 2.1V
    - DDR_Reference Voltage Settings (Both): 0.9550V
    - Spread Spectrum = Disabled
    Quote
    more annoying is the fact that it will do the power up / power straight back off thing 2 or more times when switching on before staying on yet is completly stable when it's on, also it seems to have trouble with the time which keeps changing when powered off, bios battery is fine and I've cleared the bios several times including with the battery removed
    >>Posting Guide<<
    Quote
    also this Uefi "click" bios which seems rather secretive and mysterious, noticed that there is one available for the P45 platinum but there is absolutly no info on it, has anyone tried it and is it worth me trying it?
    If you expect it to solve system and memory overclocking issues:  No. 
    If you have no special needs for an UEFI Implementation (Software Wise): No.
    If you simply want to look at it and see how it works:  Well, go ahead.

  • CMOS / RTC Battery for Satellite A100-326?

    Hi,
    I'm after a replacement CMOS/RTC battery for my A100-326
    I've got my machine open and located the battery but it has no model number on it.
    I have contacted a Toshiba assistance center and they replied that the battery is part of the board and the whole board has to be replaced. However, if I can find the reference for the battery, I have a friend in a computer store that will replace it with a new one.
    Any help would be great. Thanks!
    Regards
    Srgio

    Hi
    Why you want to replace this
    Such battery is reachable
    To charge the RTC battery you have to connect the AC adaptor to the notebook.
    The main battery should be inserted too and the notebook should run for 20.24 hours.
    Anyway, as far as I know its a Lithium Ion RTC battery 3V and 14mAh

  • Toshiba portege model A605-P200 won't POST bios unless I take out the battery and put it in again

    toshiba portege model A605-P200  won't POST bios unless I take out the battery and put it in again
    though, at times, it will, generally all i get  is a flashing cursor   NO  toshiba splash screen.  this seems to have started as an unsucessful  windows update
    i am getting  driver  freezing at crc.disk.exe   when i safe boot  when  i get  the machine to boot  past the bios
    thanks

    Unfortunately, it sounds like it might require servicing.
    - Peter

  • Cmos (rtc) battery replacement for hp G62-b25sa

    Hello!
                 Could anybody help me to replace CMOS (RTC) battery for my laptop HP G62-b25sa pls? And How can I find the correct CMOS battery for this model HP G62-b25sa ? 

    Hi,
    The following manuals will shows you correct part # and how to replace it:
       http://h10032.www1.hp.com/ctg/Manual/c02641795.pdf
       http://h10032.www1.hp.com/ctg/Manual/c02542455.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • New StartUp Issue

    My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
    After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
    The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
    I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
    Any ideas guys??

    you can try to boot to safe mode ( restart holding Shift )
    - you can attempt to boot to install disc and disk utility
    - you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
    - chances are, this is a hardware issue though. you will probably need repairs.

  • Startup issue - Process 'Starting Framework'

    Hi
    I seem to have a startup issue with NM2004s.  I get a Half Green/ Half Yellow icon in the MMC.  The 01 instance is always yellow and never progresses onto green.  I have a process status of 'starting framework'.
    Anyone else had this issue?
    Cheers
    Ian

    Hi Ian,
      I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
      Any hints would help.
    Thank you

  • Managed server startup issue!!!

    hi all,
    i am facing managedserver startup issue
    i am start the managed server it will up take the 6 min
    how to reduce the time
    1)i am trying differnt ways 1)threaddump 2)GCparamets
    but no usee
    can u see the log and give me suugestions
    below log one perticuler area it will load the application 4 min
    please see the time stamps 8:31:01 to 8:35:09
    please give me suggistions!!
    ======================================
    ####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

    hi sandeep,
    i take the thread dump 10 times at the start the server can u look into this one...
    ===============================
    CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
    PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
    Your environment has been set.
    QCHTTPHeaderIdentityAsserter.initialize
    AgileAuthenticationProviderImpl.initialize
    2010-04-10 20:03:14
    Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
    "Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
         - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at java.lang.Thread.run(Thread.java:619)
    "LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d820a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
    "LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d920a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
    "VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at java.lang.Object.wait(Object.java:485)
         at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
         - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
    "ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
    java.lang.Thread.State: RUNNABLE
         at weblogic.socket.PosixSocketMuxer.poll(Native Method)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
         - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
         at java.lang.Object.wait(Object.java:485)
         at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    "Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
         at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
         - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
    "weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
         - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
         at java.lang.Thread.run(Thread.java:619)
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
    java.lang.Thread.State: RUNNABLE
         at java.util.HashMap.<init>(HashMap.java:209)
         at java.util.jar.Manifest.<init>(Manifest.java:37)
         at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
         at java.util.jar.JarFile.getManifest(JarFile.java:146)
         at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    "Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2d76210> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2da0170> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
    java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
         - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
         at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
         at java.lang.Object.wait(Object.java:485)
         at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
         - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
    "main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
         - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
         at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
         at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
         - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
         at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
         at weblogic.Server.main(Server.java:67)
    "VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
    "GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
    "GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
    "GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
    "GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
    "GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
    "GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
    "GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
    "GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
    "GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
    "GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
    "GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
    "GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
    "GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
    "GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
    "GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
    "GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
    "VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
    JNI global references: 957
    Heap
    PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
    eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
    from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
    to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
    PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
    object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
    PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
    object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • Another startup-issue

    I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
    After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
    Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
    Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
    Thanks in advance,
    Timo

    Hi
    +"Would you say the USB-slot is broken in any way?"+
    Possibly? Running an Apple Hardware Test might say?
    +"Is it something that can be fixed?"+
    Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
    You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
    Tony

  • Have any ideas re: G5 startup issues? Long post...

    My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
    Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
    Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
    Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
    I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
    My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
    I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
    Thanks in advance.

    Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
    That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
    I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
    Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
    To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
    Thanks.
    G5 Dual 2.5 MHz Mac OS X (10.4.8)

Maybe you are looking for