Still can't get airplay to work!!!!!
Grrrrrrrrr. Still can't get airplay to work with either my iPad or my iPhone to my atv2. Everything has the latest firmware, including my airport extreme. Airplay is turned on in options on the atv2.
Everything is on the same network. I even switched networks but still nothing.
I do not see the blue icon that let's me stream to the tv.
What the heck am I doing wrong?
Hi,
Your profile indicates you are running v10.5.7. If that's the case, you need to update your system software to v10.5.8 which is the minimum requirement for the iPad.
Click the Apple () menu then click: Software Update...
And make sure Bluetooth is not enabled on either the iPad or the iPhone. Tapping Settings / General / Bluetooth.
Carolyn
Similar Messages
-
have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciatedYou are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network. -
My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone
Contact itunes support. Click Contact Us at the bottom of this page.
-
hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?
In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have changed my password and still can't get home sharing to work. Get the message "Home sharing could not be activated because the account or password was incorrect." It's what I have used to sign in here! Any help much appreciated.
So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID. -
Tried both ways in the Wiki, still can't get network printing work
Hi,
I have tried both the client and server ways following the Wiki, still could not get network printing work.
For the first way, I tried to put either the host name or the ip address (starting with 192) of the remote printer into /etc/cups/client.conf. But both Okular and Evince failed to see the printer in the dialog.
For the second way, with cups-browsed running, it only managed to discover printers in my local network (ip starting with 137) which I have no access. I tried to manually add the printer using its ip, but it still did not work.
What can I do? I have spent hours trying to work it out but failed. I would appreciate a lot your help. Thanks.Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
-
Can I get airplay to work on other applications than Itunes on my Macbook Pro?, How
How to get airplay to work on macbookpro, on other applications than Itunes?
How to get airplay to work on macbookpro, on other applications than Itunes?
-
How can i get airplay to work
From what Mac or iOS device? Have you gone through these steps? What happened when you try?
Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch
About AirPlay Mirroring in OS X
Matt -
HT201335 I can't get airplay to work between my 5c and apple tv
I've tried just about everything I've read on it and still can't find a way
they have to be on the same network airplay does not work across the Internet
the appletv has to be appletv 2g or later -
The only thing to do to get the R3D files working is download a plugin pack with 2 files in it. one goes in your plugin folder the other in some other folder. I found both original files and replaced them with the new ones. I have rebooted twice... nothing. it won't recognize R3D files. The Camera is a Red brand Epic Dragon and it puts our R3D files. R3D's are easily manipulated in Redcine, but I can't add my .mov files on it so I need to be able to work with these files in PP.
I'm sad now
Good thing I have a PC with 32-bit windows!
Now, I can only assume apple is working on a 64-bit
fix? I suppose that info/ETA is on the itunes page,
I'll go take a look.
Who knows what Apple plans are? I do know that they do not discuss upcoming releases of anything until its available. -
Activated phone but still can't get it to work.
I have spent all day activating my iphone, set up an account, etc. and now it when I send a text or someone tries to text me it tells me "recipient has insufficient funds to receive message". I have tried to call customer service only to be disconnected every time by your automated service. How in the world can I get some help with this?????
Brooks, I am sorry to hear that you are having difficulties activating your device! You can activate the device right here: http://bit.ly/xB4iTc ! Do any other services work on the device (i.e. Data or Voice)? Please share more details. We are here to help!
SammuelP
VZW Support -
Can't use airplay on my av receiver since I downloaded ios7 was working fine with ios6 no airplay icon showing on ipad
Try rebooting your router.
-
How can I get Airplay to work with my 3TB Time Capsule and my two AV receivers
I have researched the net to death and my only solace is I don't appear to be alone. I have a 3TB Time Capsule that has a Denon and Pioneer receiver attached to it by ethernet. Also connected to the time capsule our three apple TV's. I can use airplay with my iPhones and iPads to the Apple TV but can't get either the Denon or the Pioneer to show up as Air Play options on any IOS Devices or my two Mac's.
I have the latest firmware on the Denon and Pioneer, the latest firmware on the Time Capsule and Mac's. I have tried power cycling, inserting a switch between the receivers and the time capsule but to no avail.
Any suggestions would be greatlyYou can't officially as it relies on hardware.
A potential software solution is Airparrot.
http://airparrot.com
AC -
Guys, before you ask me to search the forums etc, believe me I've exhausted every possible avenue to try and find out where the hell my password keeper has gone to!
So here we are, this is the situation;
1. Have an old Pearl 8110
2. Bought a new Pearl 9100
3. Backed up the 8110
4. Restored everything onto 9100
5. Where the password keeper? It's not there!
So what did I do next?
1. Factory reset/wipe - still not there.
2. Downloaded the OS6 from the website and reloaded that - still not there?
I've used the application loader and all I see in the application manager is the email set up. All the forums are saying that I can select/deselect applications to load and unload, but I can't see the password keeper anywhere.
Isn't there just a simple binary or something which I can download which I can then use the DM to upload onto the 9100?
Surely someone out there knows what to do and get this working again?
Anyone?
Thanks in advance!
G
Solved!
Go to Solution.then I think the OS you installed on your PC for 9100 is incomplete. I suggest you download it once more entirely,
uninstall the previous one, install the new one and at one point while using loader.exe you will be able to select financial dictionaries as well as applications including the Password Keeper.
In any case, you cannot use the ALX file for one specific model with another model.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Still can't get Epson driver working....any help?
Hi all, I've posted elsewhere and this site and am new to mac so bear with me. I really cant seem to get my epson 3800 (and my old 830U) to work, even after downloading what I thought were the most current drivers. Am I missing something... I've been at it for so many hours now, and would love to love my new mac after swapping (from a very functional) PC system. Forgive me if I'm asking already answered questions but I've followed all the advice I could find and still no luck. Al i get is a single, generic printer dialogue with no options worth speaking of... what happened to all my printer functions...I really need them for my work, and can't bear the thought of having to re-install my PC to get me through.
Any help much appreciated.
SNThanks for you help...sadly I have done this several times now with no luck. After deleting all drivers, I download the latest version direct from the Epson site (pro 3800), I then delete any printers in print menu, re-add the new printer driver, navigate to select the driver again. I check the details are correct (driver version 6.1).
Still no luck...what am i doing wrong? Is there something I am missing here?
I am just about at the end of my teather here...Is it possible to revert a previous version of OS x...I've not done this before but I just have to get working and I've been trying to solve this problem for nearly a day now...
Sorry, not anyone's fault.
SN
Maybe you are looking for
-
BW-WebI Report: MDDataSetBW.GetCellData. System error in program
Hi, I'm trying to run a WebIntelligence Report connected with BW Query but return error before showing the results. The error is: Error in MDDataSetBW.GetCellData. System error in program CL_RSDRC_MULTIPROV and form SETRESOLVE-01- (consid.TxtDescrit
-
Radeon/xkeyboard error when starting X server
Hello. How can I fix the following errors that I get when I'm starting X. (WW) RADEON(0): Failed to set up write-combining range (0xe8000000,0x1000000) (EE) RADEON(0): Static buffer allocation failed. Disabling DRI. (EE) RADEON(0): At least 17325 KB
-
I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.
-
Im posting here since the MacBook doesnt have one yet
hey does anybody this is probably a stupid question but here goes. does the apple logo on the back of the screen still light up on the Black MacBook?? i think that would look pretty sweet. ~ChRiS
-
Hold indicator value after threshold is exceeded
I have a portion of my VI that uses an auto indexed for loop to view an array of 10 boolean values indicating whether a test threshold has been exceeded. If a false value is recieved on any of these 10 channels, I need to have an indicator display t