Still can't load Apple OS X

My problem is after first screen where you choose your language a yellow warning triangle comes up and says you cannot load apple on this computer. At this stage there is the usual row of options on the top of the screen. You cannot access these until you quit the warning message.
I am at my wits end with this.Any help would be very gratefully appreciated.
P.S. I did not install windows it was already installed when I bought the Macbook.

There are at least 3 variables to your problem. The hard drive, the ram, and the optical drive. You need to change one of them to see where the problem points to. I don't think the order of the change will make much difference. Problems are always found at the last place you look
To get rid of the variables on your existing drive you could try to install Leopard to an external hard drive that is properly partitioned with the right Partition Scheme for your CPU and formatted as HFS+ Journaled. If that works you can SuperDuper! clone the new OS onto the old boot partition on your original drive. This would leave the existing Windows partition alone.
If you can't install to an external drive, then I suspect any 3rd party ram is getting in the way or the optical drive is having problems reading the DVD.
If it's 3rd party ram, it can usually be removed during installation and replaced later (your profile doesn't say how much you have). The installer seems to be more sensitive than the actual OS.
If it's the optical drive you can try to use the drive in your iMac by booting it in target mode and connecting it to your Laptop.

Similar Messages

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages

Settings > General > Reset > Reset Network Settings.

Firefox says that in order to load a webpage, I have to have javascript enabled. When I follow the instructions, it shows that java IS installed, but I still can't load the page. What can I do to fix this?

When I try to load certain webpages, a message says I have to have Javascript enabled with instructions on how to enable Javascript. Javascript IS enabled, but I still get the same message. What can I do to fix this?

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
http://kb.mozillazine.org/Java <br />
http://kb.mozillazine.org/JavaScript

Still Can't Load GART drivers & AGP is MIA

This is driving me nuts...
Despite my best efforts, I (still) cannot load the GART drivers which means DX9 is saying AGP Texture Acceleration is "Not Available".
I have flashed my BIOS with the current version, removed all the drivers, downloaded and installed the latest ATI Catalyst drivers and downloaded and semi-installed the latest nVidia drivers. I say "semi-installed" because when I run the nVidia set up, the install wizard pops up, scans my system, and then shuts itself off. So I wind up manually installing only the audio drivers via "Add New Hardware"
So, does it take to get the rest of the nVidia drivers in??
You guys helped me out earlier today, can you work some magic again??

note this for k7n2 delta-L with XP also using nforce unified 5.10 with out audio keys
for to large post here, use the nvmcp.inf keys for audio
sample audio string
%PCI\VEN_10DE&DEV_01B1&SUBSYS_838410DE.DeviceDesc% = NVMPC_Install,PCI\VEN_10DE&DEV_01B1&SUBSYS_838410DE
can try fixing MS to see your hardware correctly by adding these keys in C:\windows\inf\machine.inf
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[NVIDIA_SYS]
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_01b4
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_0064
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_00D4
%PCI\VEN_10DE&DEV_01AA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AA
%PCI\VEN_10DE&DEV_01AB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AB
%PCI\VEN_10DE&DEV_01AC.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AC
%PCI\VEN_10DE&DEV_01AD.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AD
%PCI\VEN_10DE&DEV_01EA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA
%PCI\VEN_10DE&DEV_01EA&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB
%PCI\VEN_10DE&DEV_01EB&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EC
%PCI\VEN_10DE&DEV_01ED.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01ED
%PCI\VEN_10DE&DEV_01EE.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EE
%PCI\VEN_10DE&DEV_01EF.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EF
%PCI\VEN_10DE&DEV_01B7.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_01B7
%PCI\VEN_10DE&DEV_01E8.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_01E8
%PCI\VEN_10DE&DEV_00D2.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_00D2
%PCI\VEN_10DE&DEV_01C3.DeviceDesc% = NVENETXP_Install,PCI\VEN_10DE&DEV_01C3
%PCI\VEN_10DE&DEV_0066.DeviceDesc% = NVENETXP_Install,PCI\VEN_10DE&DEV_0066
%PCI\VEN_10DE&DEV_0065.DeviceDesc% = NVHDC_Install,PCI\VEN_10DE&DEV_0065
c:\windows\inf\AGP.inf
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[NVIDIA_SYS]
%PCI\VEN_10DE&DEV_01A4.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A4
%PCI\VEN_10DE&DEV_01A5.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A5
%PCI\VEN_10DE&DEV_01A6.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A6
%PCI\VEN_10DE&DEV_01E0.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01E0
%PCI\VEN_10DE&DEV_01E1.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01E1
[Strings]
NVIDIA_MFG = "NVIDIA"
PCI\VEN_10DE&DEV_01A4.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01A5.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01A6.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01E0.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01E1.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"

Can't load Apple Special Event 2010 Keynote video?

I'm not able to load the Apple keynote video! Quicktime player opens but nothing happens after wards even when i click 'play' button. Was able to view the iPad video without problems though. Any help?

I shared your frustration until I gave up and checked out the iTunes store. Just subscribe to the Apple Keynote podcast and you can download the iPad announcement. The good thing about it is that I can save the podcast on my iPhone and annoy my PC friends with the coolness of the iPad.
It would be nice if Apple would see fit to post a link to the podcast for those having trouble with the video. I can't believe we are the only ones.
Hope that helps!

Can't load Apple TV

'An error occurred loading this content. Try again later.' This comes up on the TV screen when I open my Apple TV. What did I do wrong? I keep trying and it's been several days. We don't seem to have any loose wires or missing connections. Can anyone help?

Answers can only be as helpful as the details provided, and really none were given here. What were you doing when you got this error? Selecting a Movie, TV show, Podcast, etc. Where were you selecting it from? iCloud, local iTunes, something you ripped? Can you play the content in question from your computer?

STILL CAN'T LOAD ANY WEBSITES IN FF, ALTHOUGH NO PROBLEMS WITH IE OR AOL. I BELIEVE I'VE TRIED EVERYTHING SUGGESTED.

Mozilla FF page loads, but no websites whatsoever will open in FF. I've checked the No Proxy box, I've turned off my Windows Firewall. There is a Firewall for my Norton, but that's been there since day 1. One day I'm doing all of my FF things with no problem; the next morning I turn the computer on & nothing in FF will work. IE works fine; AOL works fine so my internet connection is not the issue. This is the message I get no matter what website I try to open (I also copied the troubleshooting text below this): Thank you for any help - this is truly driving me nuts!
Unable to connect
Firefox can't establish a connection to the server at www.aol.com.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Troubleshooting "copy text to clipboard"
Application Basics
Name: Firefox
Version: 33.0.2
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: AVG SafeGuard toolbar
Version: 17.1.3.3
Enabled: false
ID: avg@toolbar
Name: InfoAtoms
Version: 1.5.0.0
Enabled: false
ID: [email protected]
Name: Norton Toolbar
Version: 2014.7.8.23
Enabled: false
ID: {2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Name: PasswordBox
Version: 1.20.0.2308
Enabled: false
ID: [email protected]
Name: RealDownloader
Version: 1.3.3
Enabled: false
ID: {DF153AFF-6948-45d7-AC98-4FC4AF8A08E2}
Name: Skype Click to Call
Version: 6.13.0.13771
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Graphics
Adapter Description: Intel(R) G41 Express Chipset
Adapter Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM: Unknown
Device ID: 0x2e32
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 2-11-2011
Driver Version: 8.15.10.2302
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) G41 Express Chipset Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 1
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141027150301
browser.startup.homepage_override.buildID: 20141027150301
browser.startup.homepage_override.mstone: 33.0.2
extensions.lastAppVersion: 33.0.2
gfx.direct3d.last_used_feature_level_idx: 1
network.cookie.prefsMigrated: true
places.history.expiration.transient_current_max_pages: 103947
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSMIME
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSSL
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSUTIL
Expected minimum version: 3.17.1
Version in use: 3.17.1
Experimental Features
---------------------

An update: as mysteriously as this began last Fri., it fixed itself (apparently) today. I left my computer on when I went out early this afternoon after again trying to open all kinds of websites in FF with no luck. When I returned from my errands it was back to normal - able to open all websites again. Evidently, the firefox elves snuck into my house while I was out & fixed whatever the issue was. I'd love to know what!

80073712 Error Message can't load Apple Application Support Windows 7

I cannot get iTunes to load. Apple Application Support error message 80073712. I have tried all Apple website solutions and they don't work.

I would like an aswer to this too if anyone knows it.

Can't load Apple Discussion page in Safari

The phone Tech support people have tried to help me with the problem I am having loading the discussion pages on Safari. The only way I can get to it is on Firefox. In the Safari cache, there are several files filled with binary codes, and the last rep I talked to thought the Safari cache might have something to do with it. Also, weird console logs. Any ideas? Thank you very much.

It appears to be fixed I am using Safari right now.
All I had to do was Toss my Cookies.
I could browse Discussions as long as I never logged on but as soon as I logged in I would get Error "The page cannot be displayed" and then I would not be able to get anywhere in the discussions without getting that error. I would have to quit and restart Safari just so I could read Discussions, as long as I never tried to log in.
Just delete your cookies I did not try to figure which one was bad I just deleted them all.

Can't load any webpages but internet works

I ran into an odd issue on a work computer running OS X Mavericks 10.9.2.
Every morning when I come in, the computer is unable to load any webpages using Chrome or Safari. Other things that rely on an internet connection (but are not accessed through the browser) still work (i.e. LogMeIn Hamachi, Accessing a remote file server, etc).
I don't think it's a DNS issue. I am able to successfully ping any website. AFP requests that rely on DNS lookup also go through. But I am unable to access any website, located on the internal network or the internet even if I know the IP address.
I tried manually setting the DHCP settings and rotating the DNS servers. Still can't load webpages.
I also tried restarting mDNSresponder and it still didn't work. The only thing that works is restarting the computer.
This happens every once in a while on other computers in the office, too.
I'm stumped. Any ideas?
Thanks in advance.

Log out under the Apple in the Menu bar.
Log into Guest
Open Safari and see if you see the same behavior
If no, it's an issue in your User's folder.
If yes, it's an base issue.
Even though you are fully updated, running the combo updater can help.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install.
"Delta" updaters can only take you from one version to the next. For example: 10.9.3 to 10.9.4. If somehow the 10.9.3 is missing something it should have, and that something isn't changed between 10.9.3 and 10.9.4 it will still be stale after the delta update.

How can i make Apple ID without Credit card if I'M stay in Indonesia..??

IM come from Indonesia and i get some difficult to create the Apple ID without Credit Card. Anyone can Help me...? I Have followed this link http://support.apple.com/kb/ht2534. But I still can't make Apple ID from that solution.
Is there any win win solution to make my Apple ID..? If u can make it for me, this is my self information
( I have registered Apple ID with this Account but Still can't login to istore becouse the apple system request me to fill the credit card form).
Please Help me ...
Best Regards,
adit
<Personal Information Edited by Host>

I've tired to try that solution,
Create New Account - Click Continue - then Error ( Like this Picture). I have followed the solution that show on More Info Link, but still can't acces to Itunes Store Term & Conditions..

HT201209 If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be? I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be? I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

If you haven't already contacted iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I did erase my iphone Erase all content and setting since 4 hours and still it is loading ?????? what can i do ?????????????????

I did Erase my iphone Erase all content and setting since 4 hours and still it is loading ??????
what can i do ???????????????
i am using iphone 4

Hi soulhaib elroumi,
If you haven't already done so, does restarting or resetting the iPhone help the issue?
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, you may want to restore your iPhone in recovery mode using a computer with iTunes.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

I have brought Lightroom 5 for a new MACBOOK PRO, but wondering, am I still alllowed to load on my desktop as well running Win 7? It looks like the office enviroment that says you can!

I have brought Lightroom 5 for a new MACBOOK PRO, but wondering, am I still alllowed to load on my desktop as well running Win 7? It looks like the office enviroment that says you can!

Eww, thanks for your reply, as it makes good sense, and common sense is practical when you walk into an Apple store.
I guess all the reviews and great specs of the new MB pro's made me want one...
I should probably use my current setup till it is totally outdated or simply is beyond repair.
I could ask Santa Claus for one, but by than, the 2012's will be coming out..:)
Thanks Eww for your reply, IAN....

While i insalling the latestest update, i have to go for basketball, then i stupidly interruped the udpating by turn off the power key, now my apple mini cant see the login interface, only can see an apple and a loading symbol.does any1 know how could ido

hello every one:
        while i am downloading the latest version of the update, it was fully downloaded, and then it need me to reboot the apple mini to instll the update, so
i did reboot it, then i have to go outside for a basketball game, then, i stupdlly interrupted the installation by turn off the power key.
       and now, i only can see an apple and a loading symbol in a white background. how could i do?
does anyone can help me. thx.
gangspn

Hello Barney:
        thank you for your reply, this helped a lot. but I faced a new problem, when i get into the interface, you mentioned, recovery HK, and i want to reinstall lion, after i get connect to the internet, it saids, i can't download the OS component without install the lion. thats really bothering me.
thank you for your help anyways. do you still know any other solutions?
i tried disk utility function, and repaire all the errors, still can't get into the login interface.
gangspn

Still can't load Apple OS X

Similar Messages

Maybe you are looking for