Still cant find good export settings for clean blacks/fades...

I have been a professional videographer for years now working full time and STILL dont have default export settings that will give me nice clean footage. If its just straight footage without any fades to black, cc, or that kind of thing then im just fine. but in my current project i fade to black a couple times and fade back into my footage to create dramatic pauses, but the fades are always very pixelated, and if i darken footage, i can never get clean blacks, even if my iso is at zero, i always get tons of artifacts in my export even though it looks fine in my viewer before export.
im using a 7d with cs6 and have done tons of searching for people's export settings and have tried all of what ive found but none have helped. mostly i hear h.264 for codec and target/max bitrate at 5-10 / 10-30.. lots of variation there but either way, nothing works. doesnt matter what level i put it at, even at 5.1..
looking for export setting for a clean master cut thats not going to be 7gb for a 1 minute thing that will play back on my computer..
to make it short - how do i export to get clean blacks/dark areas and smooth fades?? THANKS

>My movies are in native MOD files. I convert em by simply changing the extension to mpg
You are starting with compressed files... and then you compress again... that is a DOUBLE hit on quality
You might try some other software (no, I don't know which one) to edit your files and export without re-compressing

Similar Messages

  • Good export settings for Mpeg stremeclip

    Hi I could not find a quicktime section so i am posting this hear.
    Ok I posted a few weeks ago about converting a lot of mpeg2 clips for editing in iMovie and Final Cut Pro. Well I just got some more clips but these are not going on DVD.
    Ok I want an export setting that will either make the video smaller or as big as the mpeg file. I want it in mov format. I want good de interlacing. I also want the quality to be a little blurred not much. You see these movies used a bad camera so the lighting was poor and the video is kinda pixelated. So i want it smoothened out.

    [Forum: Quicktime for Mac OS|http://discussions.apple.com/forum.jspa?forumID=932]
    However, if you are doing this with MPEG Streamclip you should really ask this question on their forums as yo will get many more users who are familiar with encoding with MPEG Streamclip. Usually third party software questions are referred to the party's own support forums.

  • I'v read all over the internet for decent export settings for mpg but cant find any. Please help.

    Hai!
    I have been searching for good export settings to use as I export my mpg files in adobe premier cs4
    But all my results are so crapy!
    I can see they are good in premiere, but after export they are as bad as if I would use windows movie maker.
    I found that AVI uncompressed only gives out the sound, no images.
    Avi compressed gives that bad look.
    QT animation gives also bad look.
    Mp4 got a max resolution of 340 x 240, so we not even gona discust that one..
    My movies are in native MOD files. I convert em by simply changing the extension to mpg
    720x576 resolution
    25 fps
    48k Hz compressed audio
    Any more info needed?
    Thanks alot for helping me, I really looked at many threads and stuff
    over internet to find a solution but i couldn't.
    This is really urgent, the movie MUST be done within 2 days. Or else i get an F

    >My movies are in native MOD files. I convert em by simply changing the extension to mpg
    You are starting with compressed files... and then you compress again... that is a DOUBLE hit on quality
    You might try some other software (no, I don't know which one) to edit your files and export without re-compressing

  • Imovie08 export settings for good quality

    I'm using iMovie08 with my Canon HF100 but cannot find the best export settings for my MP4-files. The exported movie needs to run on my PS3 and my macbook. I want to export in 720p and 1080p format, using H.256 and ACC, but I'm not sure what bitrate to use for my movies to get acceptable quality. Tried using 5000k for 720p but that left me with lots of compression artifacts.
    Any hints?

    For 1080p try unlimited bitrate or a minimum of 16000.

  • Cant Find the Call Settings On My Z30

    Hello, I need some help.
    I bought my z30 this past Saturday March 29 from an authorised dealer in Dubai who told me that the phone can work anywhere as I reside in Dubai. Sunday March 30 I arrive to Cairo and go to my network carrier Mobinil who chopped my old SIM and made it into a new micro one to fit my z30.
    I set up everything, including wireless and the network was working fine, as well as emails and text messages, however I never thought about making calls until yesterday April 1st. The following are the problems I am facing now, I would really appreciate any HELP:
    1. I am unable to make or recieve calls. When someone calls me, they get a ringing tone but I recieve no notification on my z30.
    2. When I try to make a call, it says "call failed unable to make call try later"
    3. I cant find the call settings that show call forwarding, diverting, waiting, when I swipe down the call settings from the main menu.
    4. I keep updating the latest software but nothing happens after, it just tells me software update available, and its always the same one OS 10.2.1
    5. Everytime I power off the phone completely, it turns back on, on its own.
    6. I returned to my network carrier to check if there was something wrong with my new micro chip; the customor relations person took out my chip, tried it on his Iphone, and it was able to make and recieve calls normallly.
    7. I did a security wipe, but still, nothing changed.
    This is a brand new phone and I am quite bewildered at what is happening. There are no Blackberry retailers in Egypt and CS from Mobinil are unable to help, and the forums online are not helping me either. I would appreciate if a seriously BB z30 buff can help me as soon as possible.
    Thanks.

    NadaH1 wrote:
    The exact model number is STA 100-2
    OS version: 10.2.0. 1521
    You can try a manual upgrade if you want to... 
    Upgrading OS10 devices using Autoloader
    You would want this version 
    Software version 10.2.1.2102 (same as OS version 10.2.1.2141)
    For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2102 file here
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Best PE7.0 export settings for Youtube HD, Vimeo or Smugmug?

    Hi all,
    I'm really new to video editing and I can't find any recommendations on the best Premiere Elements 7 export settings for Youtube HD, Vimeo or Smugmug. It seems like most of them want you to upload in 1280x720.
    My original source is 1920x1080 30p AVCHD from a Canon HF100. Obviously, I would like to keep it at the same frame rate. There doesn't appear to be a preset in PE7 (or a way at all) to output 1280x720 30 into an MPEG container with H.264 encoding. When I go into the advanced properties of a preset like "H.264 1920x1080i 30" or "MPEG2 1920x1080i 30" and choose 1280x720, I no longer have an option for 29.97 fps - the only options are 23.976 or 24 fps. It seems bad to change this, right?
    I see the preset for "HD 720p 30" which appears to be MPEG encoding of the video stream instead of H.264. This seemed to work OK, but I wasn't sure about it, because when I choose it I see in the description a line that says TV Standard: NTSC. A number of web sites indicate that H.264 is preferred, but I don't really understand why.
    I also found a way to do H.264 in a Quicktime container. This seemed a little suboptimal because you can't do variable bitrate. When I unselected the "select bitrate" checkbox, it seemed like a quality of 50 yielded a .mov file with a bit rate of 2.87Mb/s, and a quality of 100 yielded a .mov file with a bit rate of 26Mb/s. It is confusing to me how the quality setting affects the bitrate on the quicktime containers.
    I'm leaning towards using the "HD 720p 30" preset and working with the bit rate choices, but am open to comments. What do others think?
    And on a related question - assuming we choose the "HD 720p 30" preset as a starting point, given the 1GB file restriction at Youtube, it seems to make sense to choose a bitrate that allows both good quality and reasonable file size. I don't know much about whether VBR 1 pass, 2 pass or CBR would be best for this kind of online HD video. Google is a little unhelpful here: http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132461
    This page (http://webvideotechniques.com/123/bigger-and-better-encoding-for-youtube-hd) seems to indicate aiming for a bitrate of 8Mbps with a minimum of 4Mbps, including 2 pass VBR.
    So, basically, I'm confused and a little overwhelmed. I think I have solutions that work, but it's hard to tell. What does the greater community think? Thanks.

    Thanks very much E Mann, that was a very helpful thread. I think it actually would apply for youtube as well. For other users, here's a direct link to the settings for Premiere Elements:
    http://eugenia.gnomefiles.org/2007/12/08/exporting-with-adobe-premiere-in-720p/
    Roughly, the answer is:
    Quicktime container
    Video codec: H.264
    Quality: 80 (I used 100 and it just takes longer to encode)
    Frame Rate: 29.97 (I guess if you are shooting in 24p, this might be different)
    Bitrate: 5000 (I might try 8000)
    Audio codec: AAC
    Output channels: Stereo
    Frequency: 48kHz
    Now, my own personal changes to this recipe are:
    Quality: 100 - takes longer to encode, no file size difference
    Bitrate: 8000
    Frequency: 44kHz (recommended by youtube)
    One final note is that for Vimeo it appears you may have to try encoding in 29.97 or 23.97 and test to see which you like better. Apparently Vimeo caps fps at 24.
    The nice thing about this is that you can get a quality video directly out of Premiere Elements and you don't have to pipe it through another program.

  • I have lost the export settings for FCP7. How can I get these back?

    I accidentally threw a folder in the trash. I got a lot of stuff back using Data Rescue, but not everything.
    I have lost the export settings for FCP7. How and Can I get these back? tia

    Sorry for the delay in response. It sounds like you have somehow deleted your quicktime ProKit with the codecs by what ever process you were trying to restore  you trashed files.
    Go to the Apple Menu > System Updates and see if the updater sees a need to install them.
    If this doesn't work - it might be
    the best thing to do would be to get FCS Remover from Digital Rebellion (free)
    http://www.digitalrebellion.com/fcsremover/
    and try to remove all traces of your corrupt installation and then do a clean install from your original disks, followed by updates to restore the new ProKit codecs.
    If your system has been corrupted by whatever you did, it might be best to wipe the drive and start from scratch - but understood this is not a pleasant choice.
    Other posters may have different or better suggestions. The FCS Pro Apps require a lot of files and file structure that may or may not be apparent, and were never drag and drop installable. They always needed to be installed with the proper installer.
    MtD

  • Import/Export Settings for Canon T4i Video

    Hey folks,
    I'm new to Premiere and loving it, but I'm wondering what the best sequence settings, as well as export settings, will be for video captured from my Canon Rebel T4i camera.
    I prefer to shoot either in 1080p with 24 fps, or 720p at 60 fps––what settings within premiere should I use when setting up my project, and what are some good export options for Youtube/Vimeo?
    thanks!

    FAQ: How do I choose the right sequence settings?
    FAQ: How do I export a movie for YouTube, Vimeo, iPad, iPhone, or Apple TV?

  • Best Export Settings For Fast/Low-Res QuickTime Movies

    I couldn't find a discussion room for FCP 7 so I figured if anybody is proficiant with FCP X, they could help me.
    Hello,
    I really could use some help with my export settings using FinalCut Pro 7.  Most of my shows are no more than 20 minutes and I pretty much know the best QuickTime export settings for uploading to Vimeo, Exposure Room,YouTube...etc.   But now I am trying export a lengthy project at 53 minutes.
    The footage is mixed and some of it was not converted to ProRes but it plays great and renders fine in the timeline. The sequence settings were picked automatically at 1920x1080 because of the main footage that was brought in.
    This upload is for client viewing purposes ONLY so I really don't care about the quality as much as the export speed.  As far as what I’ve tried - I am using the H.264 codec.   I tried lowering it to NTSC 720x480, then tried 1280x720 HD.  I set the compressor lower than medium and the Kbps (?) settings to AUTOMATIC when I typically set it manually, between 3000 and 5000.  My audio is set at AAC.
    It’s a crappy project because of the way it was frankenstein’d together in the field (I’m just cutting it), but I'm committed now and have a huge deadline.  I'm getting a bit nervous because of how many hours it’s taking to export.  The client is going to make inevitablec hanges and will want to see those changes quickly again - online.
    NOTE: My Compressor does not work and I’ve never needed to use so far so that option is not available.
    I could really use could some wisdom today!
    Thanks so much to whomever can steer me in the right path.
    `Patrick
    Message was edited by: prepstein

    Try here
    https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • FCE-HD export settings for slideshow

    Hey dear specialists,
    I need to have a help for the export settings for a slideshow
    I am using FCE-HD 4.01 on either MacBookPro with Mountain Lion or on my old G5 with 10.6
    Input are slides in JPEG with 15MByte Pixel.
    As soon as I am using transition of a picture the result in export in all setting I can choose from FCE, which I found out is very bad, because picture has the interlacing effects at the borders
    What can I change to get a good result
    Thanks in advance for the feedbacks
    Best regards
    FJ
    N.b.:  screenshot abstract >>>> see right hand video lines

    Hey Russ,
    the video rate of the object does not change when I manipulate on the easy setting
    If I import pictures, I do this directly from pircture folder into the BIN, and that should be independently from video input setting
    The frame rate should also not be a problem for me here in Germany, because working directly from MAC to flatscreen
    I put you a screenshot of the new sequence
    The Mov output looks not that bad, even if one looks into detail see picture attached, the steps between one and next frame creates problems
    I try also to send you the latest version of a slide transiltion example in iPhone quality ( this can not be attached ) it is a 2MB file. If you like I send you by email.
    looks a bit improved vs the morning, but I do not feel confident.
    What do you think?
    Best regards and will come back tomorrow
    FJ

  • FCE export settings for higher quality video

    Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
    Douglas Eye
    http://hundredmountain.com

    The simplest way to produce good quality video for the internet is:-
    1. File>Export Using QT Conversion.
    2. The "Format" window should say, "QT Movie".
    3. In "Use" select "LAN/Intranet" from the dropdown menu.
    4. Click "Save" and when it has finished encoding, upload it.
    Do not mess about altering audio settings, frame rates etc.
    Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
    Is that too big?
    Message was edited by: Ian R. Brown

  • Best export settings for dvd

    Im sure this question has been answered already but i dont see it anywhere. So what is the best export settings for getting the highest quality from my original footage for making dvd in encore? My original footage is recorded in AVCHD

    >require this much memory
    Just a comment to help with future communication... memory is RAM, file storage is on a hard disk
    Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication
    My 3 hard drives for video editing are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
    2 - 320Gig data for Win7 paging swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folders and files
    3 - 1Terabyte data for all video files... input & output files (1)
    (1) for faster input/output with 4 drives
    - use drive 3 for all source files
    - use drive 4 for all output files
    (2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
    Search Microsoft to find out how to redirect your Windows paging swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    Drive C space http://forums.adobe.com/thread/1007934?tstart=0

  • Export settings for high quality, high resolution screen cast

    I am trying to use iMovie for editing some software demo screen casts, and while my movie looks dandy in iMovie shown full screen, my final export looks like there is a lot of compression and antialiasing going on.
    I am starting with a 1920X1080 screen capture via iShowU HD Pro, using Animation as the compression type. For final output I am using the Export using QuickTime option, and I have tried MPEG-4 at Best Quality, H.264 with Best Quality Compression and Multi-pass Encoding, and both look pretty bad. Anyone have any recommendations on the best export settings for a screen cast? Especially one that I would ultimately like to make available cross platform as well as via iTunes?
    Thanks,
    Gordon

    I understand iMovie 6 won't compress the import. Everyone complained when apple changed away from iMovie 6 and but a link to download ILife6 (no cost) but they have since removed the link. I am looking for ILife 6 myself to get an uncompressed import if you find it please post so I can get it too, thx dan

  • HT201304 Hi! My My mom bought me an iPhone 5 and I have a problem with my facetime I cant find it! Cant find it in settings and restrictions. She bought this in Bahrain both my iPhone and she ipad mini and she has facetime on her. What should I do?

    Hi! My My mom bought me an iPhone 5 and I have a problem with my facetime. I cant find it! Cant find it in settings and restrictions. I remember when she gave me this I see facetime in settings and after a couple of days its gone! She bought this in Bahrain both my iPhone and her iPad Mini. And I'm just wondering why she has facetime and why mine is missing? Please help! My iMessage is perfectly working. I lived in the Philippines

    Are you trying to use the phone in Bahrain with a supported carrier there? I suspect not. If you try to use this phone outside of Bahrain, you won't have FaceTime. This is done to prevent folks from simply crossing the border to purchase iPhones in Bahrain...FaceTime is banned in Saudi Arabia & the UAE. Sorry, but you'll only have FaceTime on that phone while using it in Bahrain on a supported carrier's network there.

  • How do i retrieve my pictures from photo stream that has dissapeared from my phone ? I backed ut up on icloud but still cant find it

    I have currently lost things from my notes and picture stream how do i retrieve them? My phone gets backedup very week on icloud but i still cant find those things that have been deleted on there own

    Unfortunately, you cannot retrieve the pictures from iCloud without an Apple device.

Maybe you are looking for