Still going crazy getting memtest to work!

Hi. I know I've asked this before, but I'm desparate.
I’ve got a Athlon 64 FX-51 system with an MSI K8T Master2 motherboard. It’s running on 2 sticks of pc3200 512mb ram. I’ve used the latest version of memtest before and it ran fine. However, I tried running it recently, but it always gets stuck on test 2 between 48-50%. The timer freezes and everything locks (although the memtest logo still flashes). I’ve tried the other versions of memtest and I get the same results. Also whenever I try to manually run other tests (other than test 1), I get the same problem. I also tried other memory sticks with the same result.
I'm not overclocking or anything like that.
Have you heard of this before? Is it likely a system problem? Is there something in the bios I may have screwed up that could cause this?
Thanks for any help.

Quote
Originally posted by gabeg
I got it to work. It was the legacy usb settings in the bios - they need to be disabled.
Thanks for any advice.
No, its actually that MSI STILL HAVENT FIXED THEIR BIOS FOR THE SMM MODE BUG!!! you shouldnt have to disable legacy usb, smm mode shouldnt fandango on core, it only does because MSI have yet to issue a bios correction for AMD erratum #93.

Similar Messages

Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Still can't get airplay to work!!!!!

Grrrrrrrrr. Still can't get airplay to work with either my iPad or my iPhone to my atv2. Everything has the latest firmware, including my airport extreme. Airplay is turned on in options on the atv2.
Everything is on the same network. I even switched networks but still nothing.
I do not see the blue icon that let's me stream to the tv.
What the heck am I doing wrong?

Hi,
Your profile indicates you are running v10.5.7. If that's the case, you need to update your system software to v10.5.8 which is the minimum requirement for the iPad.
Click the Apple () menu then click: Software Update...
And make sure Bluetooth is not enabled on either the iPad or the iPhone. Tapping Settings / General / Bluetooth.
Carolyn

Tried both ways in the Wiki, still can't get network printing work

Hi,
I have tried both the client and server ways following the Wiki, still could not get network printing work.
For the first way, I tried to put either the host name or the ip address (starting with 192) of the remote printer into /etc/cups/client.conf. But both Okular and Evince failed to see the printer in the dialog.
For the second way, with cups-browsed running, it only managed to discover printers in my local network (ip starting with 137) which I have no access. I tried to manually add the printer using its ip, but it still did not work.
What can I do? I have spent hours trying to work it out but failed. I would appreciate a lot your help. Thanks.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.

My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

Contact itunes support. Click Contact Us at the bottom of this page.

I have changed my password and still can't get homesharing to work. Get the message "Homesharing could not be activated because the account or password was incorrect. It's what I have used to sign in here!

I have changed my password and still can't get home sharing to work. Get the message "Home sharing could not be activated because the account or password was incorrect." It's what I have used to sign in here! Any help much appreciated.

So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID.

I think I'm going crazy getting my CSS11501 to work as intended!

I've been posting here before regarding CSS and NAT'ing and how our web servers just log the VIP address of the CSS.
Now it turns out after a talk with our programmers, we can't use NAT at all because the backend servers will deliver services based on source IP addresses.
So here's my configuration: backend servers -> HP Procurve 2650 -> CSS11501
The CSS interface where the servers are connected to have the following configuration:
interface e5
bridge vlan 2
redundancy-phy
phy 100Mbits-FD
And circuit VLAN2 is as follows:
circuit VLAN2
description "LAN"
redundancy
ip address 192.168.1.4 255.255.255.0
I tried yesterday to separate two servers as a test in a vlan so that the CSS would act as a bridge between the servers and our firewall (which acts as a router).
So on the switch, I assign the ports for e5 on the CSS as untagged in the default vlan and tagged in vlan2. I then assigned the server ports for untagged in vlan2 and 'no' for the default vlan.
They can't see each other with this configuration, and setting the e5 interfaces as untagged in vlan2, tagged in vlan1 and the server ports untagged in vlan2, they still can't see each other!
And I really mean they can't see each other, if I clear the arp cache for the servers, the CSS doesn't pick up the MAC addresses again, so it's clear that there's something with the vlan tagging.
I've been working on this for a week and it's just getting more frustrated as I try different things which still doesn't work, what am I doing wrong?
Also there's a potential additional problem which I hope I can get an answer to: The servers has two nic's active. The primary nic has an IP address which is on the same subnet as the CSS WAN interface. If I get the servers and the CSS to talk across the vlans, will this be a problem with bridging, as the CSS finds a host on its LAN segment which has an IP address that belongs to its WAN segment?

Thanks Gilles.
I read the list of advantages and disadvantages.
However the only disadvantage I can see, is that the CSS yelds lower performance since it has to shuffle inbound and outbound traffic on the same interface.
For instance: "When using this configuration, the load balanced servers will see all traffic as being originated from the CSS rathar than the real client source IP address. You do not get a true representation of where your traffic is coming from."
and in the following example:
"The CSS is now configured to load balance to the services, however, there is one problem. When the traffic goes through the CSS to get load balanced, the destination IP address is changed but the source IP address is not changed. When those packets head back to the client, they bypass the CSS through the switch because the servers' default gateways are set to the router IP address and the source IP address of the load balanced request is not on the local subnet.
You must not only NAT the destination address of the packet but the source addresses as well. In order to do this, configure the source groups."
This could be considered a bit misleading; I set the default gateway for the servers to the CSS, and not only do I *not* need to NAT, I *do* see the real client source IP address not the CSS VIP address, and furthermore, the servers have full access to all of our network resources as well as the internet if we chose to.

I can't get CS6 to recognize R3D files. I put the plugin and the server files in the proper spot and I used 64 not 32 like it said. I still can't get it to work

The only thing to do to get the R3D files working is download a plugin pack with 2 files in it. one goes in your plugin folder the other in some other folder. I found both original files and replaced them with the new ones. I have rebooted twice... nothing. it won't recognize R3D files. The Camera is a Red brand Epic Dragon and it puts our R3D files. R3D's are easily manipulated in Redcine, but I can't add my .mov files on it so I need to be able to work with these files in PP.

I'm sad now
Good thing I have a PC with 32-bit windows!
Now, I can only assume apple is working on a 64-bit
fix? I suppose that info/ETA is on the itunes page,
I'll go take a look.
Who knows what Apple plans are? I do know that they do not discuss upcoming releases of anything until its available.

No Password Keeper on 9100 - spent hours on forums, still can't get it to work! HELP!!!

Guys, before you ask me to search the forums etc, believe me I've exhausted every possible avenue to try and find out where the hell my password keeper has gone to!
So here we are, this is the situation;
1. Have an old Pearl 8110
2. Bought a new Pearl 9100
3. Backed up the 8110
4. Restored everything onto 9100
5. Where the password keeper? It's not there!
So what did I do next?
1. Factory reset/wipe - still not there.
2. Downloaded the OS6 from the website and reloaded that - still not there?
I've used the application loader and all I see in the application manager is the email set up. All the forums are saying that I can select/deselect applications to load and unload, but I can't see the password keeper anywhere.
Isn't there just a simple binary or something which I can download which I can then use the DM to upload onto the 9100?
Surely someone out there knows what to do and get this working again?
Anyone?
Thanks in advance!
G
Solved!
Go to Solution.

then I think the OS you installed on your PC for 9100 is incomplete. I suggest you download it once more entirely,
uninstall the previous one, install the new one and at one point while using loader.exe you will be able to select financial dictionaries as well as applications including the Password Keeper.
In any case, you cannot use the ALX file for one specific model with another model.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

STILL trying to get Oracle to work on linux -- HELP!!

Hi all-- a dumb newbie problem if I may:
I have Oracle 8.0.5 installed now on Linux (RH5.2).. As per the
install instructions, I created a file /etc/rc.d/init.d/dbora
containing the following:
# Set ORA_HOME to be equivalent to the ORACLE_HOME
# from which you wish to execute dbstart and
# dbshut
# set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME
ORA_HOME=/home/oracle/8.0.5.0.0
ORA_OWNER=oracle
if [! -f $ORA_HOME/bin/dbstart -o ! -d $ORA_HOME]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
su - $ORA_OWNER -c $ORA_HOME/bin/dbstart &
'stop')
# Stop the Oracle databases:
su - $ORA_OWNER -c $ORA_HOME/bin/dbshut &
esac
In the instructions, it then says:
5) Link dbora by entering:
# ln -s /etc/rc.d/init.d/dbora /etc/rc0.d/K10dbora
# ln -s /etc/rc.d/init.d/dbora /etc/rc2.d/S99dbora
.. this is where I am assuming it is set so that this dbora gets
executed on system boot.. correct?
Anyway, it doesn't work. First of all, I am logged in as root.
Second of all, I am assuming the # signs in there are a mistake
since they are comments in the bash shell. Third of all, if I
just try:
ln -s /etc/rc.d/init.d/dbora /etc/rc0.d/K10dbora
It returns an error saying:
ln: cannot create symbolic link `/etc/rc0.d/K10dbora' to
'/etc/rc.d/init.d/dbora': No such file or directory
So, I tried a 'ls /etc/rc*' and I got:
init.d rc.local rc.sysinit rc1.d rc3.d rc5.d
rc rc.news rc0.d rc2.d rc4.d rc6.d
... so, rc0.d IS there... so, THEN I tried: ls /etc/rc0.d and
got:
ls: /etc/rc0.d: No such file or directory
huh?? why won't this work? does it or doesn't it exist?
Thanks for any help.
null

A very obnoxious feature of ls in many UNIXes is that
'ls foo*' will show you the contents of the
subdirectory that matches foo* without reminding you that
the file names you are seeing displayed are NOT in your
current directory but, rather, in some subdirectory whose
name happens to begin with foo (you have NO IDEA, precisely,
WHICH directory contents you are seeing.)
For example, in RedHat 5.2, do the following:
cd /etc
ls pp*
What you will (probabably) see displayed APPEARS to be a
list of files in /etc:
chap-secrets ip-down ip-up options pap-secrets
What, IN FACT, you are seeing are files in /etc/ppp.
One way to avoid this confusion is to use the -d option to ls.
'ls -dl pp*' will display one line, showing you the existence
of the directory ppp within /etc, rather than its contents.
As an exercise, also try doing: ls -dF /etc/p*
And, don't forget to thourougly read: man ls
Continuing to the specific problem at hand...
Derek Bumpas (guest) wrote:
: ln: cannot create symbolic link `/etc/rc0.d/K10dbora' to
: '/etc/rc.d/init.d/dbora': No such file or directory
: So, I tried a 'ls /etc/rc*' and I got:
: init.d rc.local rc.sysinit rc1.d rc3.d rc5.d
: rc rc.news rc0.d rc2.d rc4.d rc6.d
: ... so, rc0.d IS there... so, THEN I tried: ls /etc/rc0.d and
: got:
: ls: /etc/rc0.d: No such file or directory
: huh?? why won't this work? does it or doesn't it exist?
: Thanks for any help.
The problem here is [email protected] thinking that ls /etc/rc*
was showing him files in /etc. This was not the case. Rather,
ls /etc/rc* was showing him a list of file names in /etc/rc.d
and rc0.d in in /etc/rc.d, not in /etc.
This further implies that the Oracle instructions (as quoted by
[email protected]) are incorrect. Instead of:
ln -s /etc/rc.d/init.d/dbora /etc/rc0.d/K10dbora
On should instead do:
ln -s /etc/rc.d/init.d/dbora /etc/rc.d/rc0.d/K10dbora
(and similarly for other startups)
(at least this is how the file system on my RedHat 5.2 is
structured -- your milage may vary -- another somewhat
annoying issue with the different UNIXes -- but they all
still make NT amd its registry nonsense look silly)
Cheers,
Dennis
http://oceanpark.com
null

I STILL can't get Bridge to work, Help

I have had Photoshop CS2 installed and activated for months. However, I have never gotten Bridge to work.
I get the apparently common, "Adobe Bridge cannot be used at this time because of licensing restrictions. You must have installed and launched at least one other Adobe application to use Adobe Bridge." I have consulted TechNote 331871, and have tried its suggestions. Solution 1, Photoshop CS2 IS activated. Solution 2, everything IS in its default location. Solution 3, removing and reinstalling Bridge doesn't help. Solution 5, I have removed and reinstalled Photoshop CS2 twice. (I have not removed the activation)
Which leaves Solution 4. Whenever I try to rerun the Common File Installer, I get "Setup has detected that a newer version of this product is already installed. Setup will now terminate.", and it does.
I have had uninstalled Adobe Premiere Elements 4, thinking that might be the problem. I also have Elements 3.0 and 6.0 installed. I have tried uninstalling 6.0 to no avail.
Anyone have any idea what may be going on, and what I might do next?

Have you seen the topic about 2/3 down this page "Premiere Elements has broken Bridge"? May provide some clues.

Still can't get Epson driver working....any help?

Hi all, I've posted elsewhere and this site and am new to mac so bear with me. I really cant seem to get my epson 3800 (and my old 830U) to work, even after downloading what I thought were the most current drivers. Am I missing something... I've been at it for so many hours now, and would love to love my new mac after swapping (from a very functional) PC system. Forgive me if I'm asking already answered questions but I've followed all the advice I could find and still no luck. Al i get is a single, generic printer dialogue with no options worth speaking of... what happened to all my printer functions...I really need them for my work, and can't bear the thought of having to re-install my PC to get me through.
Any help much appreciated.
SN

Thanks for you help...sadly I have done this several times now with no luck. After deleting all drivers, I download the latest version direct from the Epson site (pro 3800), I then delete any printers in print menu, re-add the new printer driver, navigate to select the driver again. I check the details are correct (driver version 6.1).
Still no luck...what am i doing wrong? Is there something I am missing here?
I am just about at the end of my teather here...Is it possible to revert a previous version of OS x...I've not done this before but I just have to get working and I've been trying to solve this problem for nearly a day now...
Sorry, not anyone's fault.
SN

3 weeks and Indesign cs5 and Illustrator cs5 are still going crazy

To sum up my problem simply about 3 weeks ago I loaded up Indesign cs5 on my wonderful macbook pro that still runs snow leapord (so it isn't an os issue) to work on a project I had saved the night before on the exact same computer and the exact same program.
No fonts had been added, nothing had been changed in setting, I had merely saved and closed it down.
Then out of nowhere it starts auto crashing on startup, I have literally run this program for the past 3-4 years with no problems at all (in fact PS tends to be the angsty one) and it suddenly rainbow rings on me on startup?
What I have tried:
restarting my computer
loading with no other devices attached and offline
new user, that did not work
cleaning the preferences file
re installing the program
I have also denied the CS5 extension manager all this time as well, so I am wondering of that program is part of the issue.
I have tried the reset key combo it didn't do anything.
I need this program working to finish up a manual, stationary, and letterhead for a project and to refine a logo in Illustrator.
I do have the student version and my license is still active.
I tried cc and I hate it, truly I do and it isn't worth what they charge you per month.
It isn't just Indesign Illustrator is acting up too doing the same thing, both programs went nuts at the same time, I have never had a problem with them before and I just got my laptop fixed so that isn't the issue.
One of those projects is due by tonight at the latest, I really would love any advice you could give, thank you.

Welcome to this customer to customer user forum.
BT do not provide or maintain the external network. This is done by Openreach who work for all service providers. BT do not get any special treatment.
Openreach have a backlog of work due to the recent bad weather, so installation and repairs are taking much longer than normal.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I have a Macbook (original 1.1) and it's in good condition. However, the mouse -selector- doesn't work. I can't click on anything. I've tried to reload the DVD and I still can't get it to work. Suggestions??

I have done the following:
1. Turned it on. Workes fine, screen comes up, programs appear to load normally.
2. Can drag the pointer on the glass touch pad, but cannot click at all. So cannot select ANYTHING. Not ANYTHING. The only thing I can do is turn the power button off and on.
Things I have tried: Plugging an external mouse in. Display response: does not recognize the keyboard, however the pointer does move with it. However, still, cannot select or accomplish anything with Enter.
Please help! There definitily is a click when I touch the mouse button below the glass, but maybe it's the battery? I don't know. Please advise. I have the set up discs but without being able to click select, I can't reinstall.

Can you play the song in iTunes?
If you can't the song file is probably corrupt and needs to be replaced.

I have changed my password 4 times and still can"t get it to work work

i have changed my password 4 iimes and it still won"t work

'tis not your Adobe® password that you need... but your Operating System Adminsitrator password.

Still going crazy getting memtest to work!

Similar Messages

Maybe you are looking for