Still have fsb 133 problems need help !!

k7t turbo ltd
amd athlon 1800+ palimino
512 centon pc133
wd 40 gig hd
400w hercules ps
NVIDIA GEFORCE4 MX 420 64MB DDR MX420 AGP
New system
System stable and runs ok at fsb 100
When I set the fsb to 133 the system gets hung on the memory check according to the diagnostic lights, if i shut down for 15 minutes, the system will start once, it will not reboot even after only bios changes,if I let it boot, windows will blue screen after a few minutes giving a driver error
I've removed the cpu and fan and reinstalled
I've tried another mother baord (k7t turbo)
I've tried another 400W power supply
I've tried a different memory simm
I've tested the memory in a different computer (runs fine) and run the memory test from this site and have no errors
What next?
       12-17-2003 01:27            
sharmane
King
Registration Date: 06-08-2003
Posts: 761
Location: Colombo, Sri Lanka
What's the multiplier set to when you change to FSB133 Mhz?
KT4V
Athlon 2000+ XP
400W PSU
266Mhz 256MB DDR
17" Samsung flat
80GB 7200RPM Maxtor ATA-133
Asus DVD 16x ATA-100
Creative 5.1 Live
MSI CDRW 32x10x40x
Hitachi CD (No tray model!)
Microlab x4/5.1 Speakers (185W RMS)
32MB VGA TNT 2
TV/Radio Card - Aver Media
10/100 Network Card
Moded casing.
        12-17-2003 01:42            
rlamon
New Member
Registration Date: 12-13-2003
Posts: 3
Thread Starter  
multiplier is set 11.5  
       12-17-2003 02:47            
Bas
You can't touch this! Hammertime!!!
Registration Date: 07-03-2002
Posts: 4,532
Location: Heppen, Belgium, Europe
Did you grease the CPU cooler properly after reinstalling it?
Bas.
Always give the amps on 3.3V/5V/12V and check the CPU-cooler, guessing isn't good enough!  
K8T Master2-FAR BIOS 1.10
1x Opteron 240 (1.4 Ghz)
MSI CPU cooler
2x256MB Infineon PC2100-Reg-ECC
Enermax EG365AX 353W 3.3V/32A 5V/32A 12V/26A
ATI Radeon 9500pro modded to 9700pro
Onboard NIC
IBM DeathStar 40GB 7200 (Accoustic disabled)
Plextor 12/10/32A (Jump'd ATA-33)
Windows 2000SP4
>>TroubleGuide
Forum Administrator/Moderator in case you didn't knew already  
Merry Christmas and a Happy new year everybody!!!!
           12-17-2003 04:21            
rlamon
New Member
Registration Date: 12-13-2003
Posts: 3
Thread Starter  
removed the old grease, cleaned with alcohol, put on new grease  
       12-17-2003 04:55

yep i run the tests with no errors
 the only thing i can think is the problems is when i uninstall the nvidia chip set drivers and restart the pc as soon as it goes back to the desktop it starts redetecting and installs the chip set drivers again automatically.
 so i dont get chance to install say the 5.11 nvidia chip set drivers , so when i try to install over the ones windows has put on its self thats when the comp restarts and says its recovered from a serious error,wot u rec is this the problem or could this be a faulty mainboard
(windows seems to install any drivers i uninstall to any of my hardware automatically my graphics card any thing.   is there a option to turn this of)

Similar Messages

  • My phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

    my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

    Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
    http://support.apple.com/kb/ht1414
    Do not restore from backup.

  • I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

    I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

    Hi Prabhuram and falez,
    This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
    ~Surendra

  • On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

    On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

    I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
    Daniel
    Codecs audio
    Type
    Nom
    Format
    Binaire
    Version
    ACM
    Codec Microsoft IMA ADPCM
    0011
    ACM
    CODEC A-Law et u-Law Microsoft CCITT G.711
    0007
    ACM
    Codec audio Microsoft GSM 6.10
    0031
    ACM
    Codec Microsoft ADPCM
    0002
    ACM
    Fraunhofer IIS MPEG Layer-3 Codec (decode only)
    0055
    ACM
    Convertisseur PCM Microsoft
    0001
    DMO
    WMAudio Decoder DMO
    0160, 0161, 0162, 0163
    WMADMOD.DLL
    6.1.7601.17514
    DMO
    WMAPro over S/PDIF DMO
    0162
    WMADMOD.DLL
    6.1.7601.17514
    DMO
    WMSpeech Decoder DMO
    000A, 000B
    WMSPDMOD.DLL
    6.1.7601.17514
    DMO
    MP3 Decoder DMO
    0055
    mp3dmod.dll
    6.1.7600.16385
    Codecs vidéo
    Type
    Nom
    Format
    Binaire
    Version
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.1.7601.17514
    ICM
    Microsoft Vidéo 1
    MSVC
    msvidc32.dll
    6.1.7601.17514
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.1.7601.17514
    ICM
    Codec Intel IYUV
    IYUV
    iyuv_32.dll
    6.1.7601.17514
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.1.7601.17514
    ICM
    Codec Cinepak de Radius
    cvid
    iccvid.dll
    1.10.0.13
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.1.7600.16385
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.1.7601.17514
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
    wmvdecod.dll
    6.1.7601.18221
    DMO
    Mpeg43 Decoder DMO
    mp43, MP43
    mp43decd.dll
    6.1.7600.16385
    DMO
    Mpeg4 Decoder DMO
    MPG4, mpg4, mp42, MP42
    mpg4decd.dll
    6.1.7600.16385
    De : sarika02 
    Envoyé : 17 juin 2014 19:26
    À : Daniel Cloutier
    Objet :  On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
    On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
    created by sarika02 <https://forums.adobe.com/people/sarika02>  in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

  • I tried dowloading Skype yesterday and my Safari browser crashed.  It gives the message "Safari quit while using the librooksbas.dylib plug-in.  I trashed Skype but still have the browser problem.  I also tried logging in under guest, and no Safari.

    I tried dowloading Skype yesterday and my Safari browser crashed.  It gives the message "Safari quit while using the librooksbas.dylib plug-in.  I trashed Skype but still have the browser problem.  I also tried logging in under guest, and still
    no Safari.

    Julie --
    Backing up QuickTime's advice --
    Unless your bank's website is insecure, you're fine.  Go up to the Safari "Search" bar and type in Rapport.  You'll be amazed.  It may  "work" on PCs, but definitely not Macs.  And it's not needed for Macs.

  • Have an 8800 and need help

    Hi,
    I have an 8800 and need help. The charger socket doesn't work anymore, the trackball doesn't go horizontal (occassionally) and the screen light turns on and off at random. I've had my Blackberry less than a year.
    Before sending it in for repair or replacement I need to back up all my data (apparently it gets cleared when a repair is done) so ordered a cradle and spare battery so I cound charge a batter externally. To compound the problem I keyed in the wrong postcode on the order (it never rains but it pours) but quickly mailed billing to tell them and with the correct PO number.
    Needless to say the items haven't arrived so I called and was fobbed off and told that this is a matter for their partner Globalware Solutions even though I paid via the Blackberry.co.uk website
    I've scoured the site and found no contact details whatsoever by which I can follow this up properly (Why do large companies do that? Are their customers not important enough to them to allow direct contact?).
    Rim/Blackberry/Globalware now have my money and have ignored all my emails. In other words I have no way of finding out the status of the order, what's happening or where my required items are.
    On top of that one of the email addresses I mailed to bounced and this site is a nightmare to use. If you're going to want a capital letter and a number of part of a password to access a forum then tell people in advance. If you're not going to let someone buy in Euros from the UK because you don't consider the UK as part of Europe then tell them. Don't let them go through the entire purchase process before letting them get to the Euopean drop down list of countries and then not including the UK in it. I could go on.
    Can someone please tell me how I chase up my order (it's only a small one) without wasting too much more time on this.
    I have to say that this is all a great shame because I've been happily using Blackberries for years now and think they're superb products. I've been an evangelist for them actively spreading the word about how great they are. I've never needed service or support before though.
    If anyone from Blackberry, Rim or Globalware is reading this then you have my order number and just an email would at least begin to resolve this. The delivery of the items paid for would entirely resolve it.  I wait for your contact.
    One thing you should know if you wish to continue to ignore me though is that I am 'Mr Persistent'.
    Jeremy 

    Thanks. I remember now that is exactly what they said. Which means I need to do it over again.
    Here's what happened. I went to my laptop to try restoring since it was my desktop that was giving me the message. I was able to install the newest OS onto my iPhone. Then I reconnected the phone to my desktop, which now gave me a different message. It said it could not sync with this iPhone until I updated to the newest version of iTunes. I was one version behind.
    So I updated and then since my iPhone had the newest OS and iTunes had the newest version, everything spoke to each other fine. At that point I got the message asking me to whether I wanted to restore from backup or set up as new.
    I thought that restoring from backup would potentially bring back the problem, but discretion being the better part of valor decided to try that first.
    Woke up this morning to your message and of course now realize that I must go through the process again, only this time set up as new. And yes I made sure to back everything up before I did any of this.
    So now it's just a matter of doing it again, which will have to wait until tonight when I don't need to use my phone.
    So thanks for the info!

  • Big problems need help fast

    i have a k8n neo platinum edition, nvidia nforce3 250gb chipset mobo. recently i was playing on my computer then out of no where it just shuts off. went to try to turn it back on and the computer fans spun for less then a second then went off and nothing else happened. i assumed immediately that it was probally a bad psu so i bought a new one, and i still have the same problem. ive taken everything but the graphics card,processor, and psu out and it still wont work. i get no post or anything and the fans on the out side are the ownly things that react to me hitting the power button. i have no clue what else to try or do. i really need to get on it for work very soon. also i built this computer 2 or 3 years ago and havent had a problem till now.
    specs: radeon 9800pro 128mb
    80gb hd
    amd athlon 64 3000+
    k8n neo platinum edition mobo

    Quote from: njo on 09-October-06, 02:00:55
    i did list specs tho in the first post at the bottom. the only thing i forgot was the ram which is in one of my other posts.
    Put it in your forum signature so people don't have to hunt for the info. You might also try a minimal out of case setup as well.

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • I have a PC.  I would like to sync my iPad2 via itunes.  My computer recognizes my iPad but itunes does not.  I have deleted the itunes program, shut down my computer and restarted and then reinstalled itunes.  I still have the same problem.  Suggestions?

    I have a PC.  I would like to sync my iPad2 via itunes.  My computer recognizes my ipad but itunes does not.  I have uninstalled itunes, shut down the computer and restarted plus reinstalled itunes.  I visited the Apple store there is no problem with the iPad or the cord. I still have the same problem and am unable to sync when I plug in the iPad via the USB cord.  Does anyone have further suggestions? 

    Try going into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, apple application support. Then redownload and reinstall iTunes and see if it'll work
    If the computer sees your iPad you know the cable and connection is good, so the issue has to be software.

  • Now i have tryied everything i need help getting premier pro trial real help pls!

    now i have tryied everything i need help getting premier pro trial real help pls!

    Hi,
    Are you facing issues installing Premiere pro trial?
    Please mention your operating system.
    Error(If you're getting any)
    Thank you,
    Mohd Naseem

  • I have 2 i4 phones.  I can sign on to iCloud on 1 but never on the other.  Does anyone have the answer to this.  I have tried to change my password but I still have the same problem.  I keep getting message "Verification Failed The request timed out"

    I upgraded to 2 -  i4 phones with 2 different phone numbers.  I can sign on to iCloud on 1 phone but never on the other.  I have changed my my password twice but no matter what I do, I still have the same problem.  I keep getting a message "Verification Failed The request timed out"  no matter how many times I try to sign on it always times out.  Before I upgraded to the i4, I had a i3GS and had the same exact problem.  Does anyone have any ideas???

    Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
    If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.

  • My software is updated to 3.0.2 but I still have the same problem. My content keep on disappearing. Any suggestions? Apple TV, iOS 5.0.1 and windows 7

    My software is updated to 3.0.2 but I still have the same problem. My content keep on disappearing. Any suggestions?
    Apple TV 1st gen., iOS 5.0.1 and windows 7.

    Thank you for your reply. I tried but it didn't work. I also tried rebooting the atv. Any other suggestions?

  • When using firefox I cannot signin to sites, but can get to sites with tabs on toolbar but cannot signout when I siginin, I have uninstalled the program and reinstalled it but still have the same problem?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/891666]]</blockquote>
    When using Firefox I cannot signin to sites, but can get to sites with tabs on toolbar but cannot signout whe signin, I have uninstalled the program and reinstalled it but still have the same problem.

    That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    You can keep an eye on this thread:
    *[[/forums/contributors/707748]]

  • Every version of firefox 6 won't open, I just get that crash report. Every time this has happened I reinstall firefox 5 which works fine. Anybody out there have a similar problem, any help would be appreciated

    every version of firefox 6 won't open, I just get that crash report. Every time this has happened I reinstall firefox 5 which works fine. Anybody out there have a similar problem, any help would be appreciated

    I had this issue. I went to c:\program files (x86)\Mozilla Firefox\
    I renamed my plugins folder to plugins.old.
    It recreated the Plugins folder and all was good again. I have since reinstalled the plugins I've been prompted to install.

  • HT5019 Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

    Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

    What have you bought?
    What model Mac are you running?
    What input sources are available on the display you are connecting it to?

Maybe you are looking for