Still have problems with my blackberry Z10

A few days ago a posted a problem i had with my Z10 but never got a solution.
Everytime i am connected to wifi and i leave the coverage area i lose connection to the internet, BBM & facebook in fact all my data services despite the fact that my service plan includes these data services and i have never experienced this on my previous bold phone.
I have to reboot the phone each time and it works fine, until i reach my wifi coverage area, then when i leave again i lose data services again & have to reboot, Very frustrating. Has anyone else experienced this. It is definately the Z10 Phone.
PLEASE HELP.

Instead of rebooting try this:
Go to System Settings. Mobile Network. Turn Mobile Network off and then on again to re-set it.
In the meantime, while in the Mobile Network menu, make sure Network Selection is set to Automatic.
Try this and see if the network data will re-set without needed to re-boot the phone.
If the problem still persists you should contact your mobile service provider. You may have to contact Blackberry support to find the answer. I have strong doubts it will be a hardware fault.
Jerry G.

Similar Messages

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
Try disabling App Nap for all your Adobe App files...
Go to your Applications folder
Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
When the info window opens up, add a checkmark beside "Prevent App Nap"
Restart the application
This fixed all my performance issues.
-Pete

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Serious problems with my blackberry z10 STL 100-1

sir,i had bought blackberry z10 in the last december.in the 1st month it worked like anything,but after the update it had many issues like battery draining,mobile reboots or turnoff itself automatically.even after many updates after that those issues have never been solved..i had reinstalled with several different os,which is useless.i have been using 10.2.1.2941 now.please help me soon...!!!

Hi! Welcome to the forums.
How often do you charge you BlackBerry smartphone in a day?
What is the battery level on your BlackBerry smartphone when you plug it in to charge?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

One year later, I still have problems with the 975X PUE

A year ago, I bought the 975X PUE board and turned out to be one of the biggest mistakes I've ever made when purchasing something computer-related.
To start with, the board didn't recognize the OCZ memory that I had bought, so I had to change it for some gSkill memory. That, however, involved a trip to Argentina since at the time it was very hard to get DDR2 memory @ 800 Mhz here in Uruguay. I had also complained about how the temperature monitor was unreliable and problems booting the computer.
I still have those problems, but I learned to live with it since no major problems arised. Sure, I'd have to boot three to six times just to get it running, but hey, no big deal.
Later, I decided to go for RAID1 and surprisingly, it worked so I had no new complaints.
However, lately something new has been happening. The computer seems to reboot randomly and without warning. This had happened before when lightning struck nearby (I blamed it on electro magnetic something) but now it happens all the time and I can't find a solution. I leave the computer on during the night and in the mornings, I come to find that it has rebooted when I was sleeping.
Here's what I have:
MSI 975X PUE (7.1083006)
INTEL E6600
GSKILL 4 GB DDR2 800 Mhz RAM
WD 320 GB 7200 RPM
2x WD 500 GB 7200 RPM (RAID1)
NVIDIA 8800 GTS
Windows Vista 32 bit
PSU Biswal 780W 30A +12V
I've looked over the latest firmware thread that used to be a sticky on here and noticed that everything else seems to be beta. MSI never released something better for this board? Here's that thread: https://forum-en.msi.com/index.php?topic=99818.0
The only thing that I could think of for these random reboots is that maybe the unreliable temperature sensors fool the computer and make it seem like the CPU is a lot hotter than it actually is. I've fired up Everest and right now, with only Firefox and a couple of IM clients running, CPUs are at 50 and 54 degrees celcius. Taking into account that the case is open and I'm in an air conditioned room set to 24 degrees celcius and that there's a mini Typhoon on top of the E6600 as well as a couple of fans in the case, these CPU temperatures are nearly impossible.
What's going on with this? Can anyone help me out?

Quote from: daiver on 04-January-08, 21:59:50
Ok, lets say my PSU is degraded. That solves my spontaneous rebooting issue. How about everything else?
I still have to boot my PC 3-6 times to get it to start. Temperature monitor still sucks as well.
Is 7.1 the latest official firmware for this high-priced mobo?
Daiver the biswall brand is a very cheap one, I think you should buy a trusted PSU. In Argentina you can find many brands, like Topower and Power Cooler, that are good PSUs and at a fair price.
The latest bios for this mother is 7.7, but some users find it not so good as 7.6. I use 7.6 and works perfect.

HT6030 Do you still have problems with Mail in Maverick after the Mail update 1.0

After the Mail Update 1.0 in Maverick I stil had problems with my passwords and with syncing my mail acoounts (google, icloud and my provider), Finally I removed Avast Antivirus and ..... all my problems are gone. Everything is working fine now. Avast is incompatible with Apple's new mail client!!!

Hello is anyone from Adobe out there? Is anyone from Adobe monitoring the forum? The 1.6 update has stopped the app from crashing when you were trying the sync function to the creative cloud.
However, the sync function is not working as it did in the past. If you make a change in an already existing file in the Photoshop touch app and save it, the sync to the creative cloud results in an explanation point instead of a check to the left of the filename. Toggling the sync button on and off doesn't change the exclamation point to a check. The blue line goes across the file as it normally would when syncing but the explanation point remains. As a result, the changed file is not being synced with the creative cloud.
I am not sure of the exact amount of time it takes, I am guessing about 24 hours. After about 24 hours when you do a sync, the file that had the explanation point to the left of it does change to a checkmark. However, you now have two files. One that reflects the change and has the word conflicted now added to the file name. As well as a file with the same name that doesn't reflect the change and no conflicted added to its file name.
For me at least the sync function no longer causes the Photoshop touch app to crash. However, the 1.6 update also doesn't sync properly to the creative cloud.
Making a change to a file in the Photoshop touch app and trying to sync it shouldn't result in the file not being synced or in a conflicted file. Could someone please help me in regard to this issue.

Did I mess up by downloading MacKeeper? Downloaded last year and today my computer is doing all kind of weird stuff and Mackeeper kept popping up to renew and I did. Still have problems with my browser and popups!?

I downloaded MacKeeper last year. Today my browser is messed up and I am getting popups. MacKeeper keeps popping up to download, so I updated my subscription-still messed up. Is this malware and if so, why did it show up a year later and after I paid again to update!?

You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.projectx.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.projectx.daemon.plist
/Library/LaunchDaemons/com.projectx.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/projectx
/System/Library/Frameworks/v.framework
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT6030 hello I did the mavericks update 10.9.2 but I still have problems with my gmail accounts ... impossible receive and send messages! what can I do please ?.... thanks

Thanks to help me please

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

I still have problems with Error 1402 in Adobe Reader 9.5 Installation. Can anyone help me?

Hi, I have a Compaq Presario C500 Laptop with Windows Vista installed. For the past year, I've been trying to upgrade from Adobe Reader version 8 to either a version 9 or 10. However, when I download and begin the installation, I always get two error messages:
The first one is the error 1402 could not open key. The registry path is HKEY LOCAL MACHINE\Software\Classes\PDFShellServer.PDFShelllnfo2\CurVer. Verify you have sufficient access to that key or contact your support personnel.
The second one occurs when it retrys: It say error 1402 could not open key. The registry path is HKEY LOCAL MACHINE\Software\Classes\AcroAccess.AcrobatAccess\CurVer. Verify you have sufficient access to that key or contact your support personnel.
I went to the troubleshooting page and followed the instructions given. But when I go into the Permissions area and do as the instructions say, regardless whether I click Apply or OK, I get a Windows Security message saying - Unable to set new owner on Cur Ver, Access is denied.
This does this no matter how many times I repeat the instructions for troubleshooting. Can anyone recommend another possible solution? Thanks!

from: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/access-denied-setting-ow ner-andor-permissions-on/71cdd66a-75ce-4e79-bace-89637e0dacae
First be sure you run RegEdit as Administrator
Right click the key in the left hand pane ... select permissions from the context menu
In the permissions dialog, click the advanced button.
In the advanced security settings dialog switch to the Owner tab
I assume your usercode is a member of the local Administrators group
Click the Replace owner on subcontainers and objects box.
If Administrators is NOT the owner, select it in the change owner to box...press Apply...OK.
You are now back at the Permissions dialog box.
Select Administrators and give them Full control by selecting the Full Control checkbox in the Allow column...press Apply ... Ok
It has been a while since I have had to do this ... so I might be off a little on the steps.
The key is IGNORE any messages that say you don't have enought rights...
You must do each key... one at a time....:)

FIREFOX HANGING: I still have problems with Firefox hanging, in the middle of operations (ie typing an email), or switching tabs. Have tried all suggested remedies in the Firefox help section.

I have updated all plug-ins, cleared download history, deleted sessionstore files but this still happens regularly - every few minutes.

I think that I have found a solution: [ha ha ha ha ha h a]
I am running XP SP3
1 - uninstall Firefox - whatever version you have
2 - search for ANY file related to 'Mozilla' that is left behind BECAUSE much crap is left & DELETE it
3 - then search & DELETE every 'Mozilla' entry in the registry - DELETE THEM
4 - then reinstall the latest VSN without any add-ons or plug-ins - only install them when they are asked for - like Flasplayer etc
seems to have worked for me
whew

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

Hello zukafu,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I have problem with my iphone 5 the battery still running so fast

i have problem with my iphone 5 the battery still running so fast

Click the link below choose your country then choose service and see if you have an Apple Authorised Service Provider in your country.
https://locate.apple.com/au/en/
If you dont have any Apple Authorised Service Providers near you either then contact AppleCare and ask them for options for postage in your country/region. You can find the number for your country below:
http://support.apple.com/kb/HE57
Hope this helps

Still have problems with my blackberry Z10

Similar Messages

Maybe you are looking for