STILL have Proximity problems

Ok, so the antenna has never been an issue for me, I mean I lost signal with the death grip but I never dropped phone calls from it or anything. I hated the fact that it took focus away from the PROXIMITY issue. It was such a big deal for me that I downloaded the GM as soon as it was released last week cause I couldn't wait any longer. Worked great on my first phone call...THEN THE SAME THING HAPPENED. Anybody else having this problem with 4.1?? I'm getting sick of this Apple
PS. Please don't give me the "get a case" answer or a "don't hit the button" as I saw on another post earlier.

Update. Having installed iOS4.1 the problem with my proximity sensor was even worse than before! I immediately took the phone to my local Apple Shop in Bath where they tested it and proved that the screen would reactivate with the sensor covered. I was issued with another new iPhone 4 (my third!) and they downloaded iOS4.1 in the shop and installed same. Tested the new phone in the shop and all appeared good. Took it home and synced it with the backup of my old phone. Have now used it for numerous calls and not a sniff of the screen coming back on. Fingers crossed it lasts!!!!!!
My conclusion is that the proximity problem is a hardware issue and not software related. Apple are probably worried that to admit the problem is hardware related would result in a huge product replacement process which would cost a fortune.
For my part I now have the best mobile phone in the world and it actually let's you make long phone calls without putting them on hold! My iPhone 4 is now on a par with my magical iPad! Long live Apple!

Similar Messages

  • After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

    After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.

  • HT4623 my  phone 4s stop making sounds, I tried reset and still no sounds only vibrate reset  all settings under general and still have the problem, also sync again to see if this help. still no sounds

    my  I phone 4s stop making sounds, I tried reset and still no sounds only vibrate. Did reset - all settings under general and still have the problem, I also re- sync again to see if this help. still no sounds.

    Hi there,
    It sounds like you have tried a few things already, but you may still find the article below helpful.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    -Griff W.

  • I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

  • Emails are "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server.

    Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.

    No that is not it:
    Open Mail>Preferences>Accounts, the first page has this on it
    If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
    If you select Edit SMTP Server list you get this:
    Post it here and, select the Advanced Tab (which looks like this)
    Post this page as well.

  • I still have a problem clearing history and i did select time range to Everything

    I still have a problem clearing history and i did select time range to "Everything". I tested using Internet explorer and I could clear the history there so its not a problem with the Xp secondary account. I even disabled the add ons in firefox and still get the same issue

    sorry, scratch this, the first post did enable me to find a solution, it was the signon.sqlite file that had become corrupted.
    As an interesting aside, this has also fixed the problem with using Xmarksspace which was giving me an "error 3" synchronising problem.
    Apologies for the tone of my previous posting, you did provide the information that enabled me to find a solution, thank you and sorry.
    Regards
    Crashhot

  • My wifi still have a problem altough i updated it to 6.0.2

    my wifi still have a problem altough i updated it to 6.0.2 anyone plz help

    I would say that it is a shame, not only bad. My Iphone 5 worked great before upgrading to 6.0.2 and it seems it is not only my experience! Please Apple fix it otherwise I will give back my device ask I will ask refund.

  • If i buy an iphone in USA and don't buy a contract, could i use it in Denmark then and buy a contract their and still have no problems with the iPhone.

    If i buy an iphone in USA and don't buy a contract, could i use it in Denmark then and buy a contract their and still have no problems with the iPhone.

    If you buy an Unlocked iPhone from the US, you can use that phone on any carrier that supports that particular phone (either GSM or CDMA). So yes, this is possible. But if anything happens to the phone that requires Apple's help, you will have to ship it back to US for that service.

  • There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles and no errors reported.

    There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. Local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles, I get no further and no errors reported. Safari, Opera and Firefox. Deleted cookies and chain but still no action.

    If you have not already done so, read the router's user manual troubleshooting section and/or contact its customer service department/forums. 
    If still having problems, post back w/details of all you have tried to resolve the problems along w/the troubleshooting solutions that the "local techies" had you try.
     

  • I'm having trouble with a toolbar called searchqu that I do not remember installing, it will not allow me to have MSN as my homepage, I removed the add on but still have the problem. Thoughts?

    had an add on installed somehow called searchqu. It will not allow me to have msn as my home page. I removed the add on and still have the same trouble.

    Hi!
    My name is John and I'm a member of the Searchqu support team, I'm here to assist! :)
    When a software was installs onto your pc it offered two basic installs, typical installation, which lists the add-on features such as searchqu default search, and Custom installation, which allows you to select the add-ons that you wish to install. There's no need to worry if you did the typical install - this isn't a virus,
    nor malware, and there's no need to Perform a virus scan against it.
    In order to change Searchqu as your homepage please check the following: http://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page
    For visual instructions please check: http://bit.ly/searchqutoolbar
    We are here to help with any further question :)
    The Searchqu support team.

  • Still have a problem with collage creation.

    My problem with trying to create a collage is still with me, I thank those that answered, and those that did answer are you Adobe staff if not where are they with the answers?

    Hi again,
    Adobe staff do frequent this space from time to time but as nobody on the forum has been able to help, I suggest you raise your problems with PSE9 directly with the tech support team. If you have paid for the current product you are entitled to help.

  • I'm back in the states and i still have a problem with iTunes account

    While I was in the dominican republic I wasn't able to make purchases in the iTunes store.  I found out it was because I have a us account.  But now I'm back but it still is not working and everything I try to do make it work is not fixing the problem.

    This is in Google searches? I suggest clearing your Firefox cache and deleting your saved Google cookies. Or you might try just clearing the cookies first.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using either:
    * "3-bar" menu button (or Tools menu) > Options > Advanced
    * Firefox menu > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (classic menu bar) Tools menu > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • HT5655 I have downloaded Adobe Flash Player several times still have the problem

    I am still having problems after downloading Adobe Flash Several Time     They keep asking me to download

    Who's "they?" Where have you been getting Flash from? Only get it from these two:
    http://get.adobe.com/flashplayer/
    http://www.adobe.com/products/flashplayer/distribution3.html
    Dumb question maybe, but downloading is not the same as installing. Have you installed it after downloading? You need to double-click the dmg.

  • I constatnly have to restart my computer to get my iTunes to open. I have updated to the latest version and still have same problem. What is causing this and how do I fix it?

    I constantly have to restart my computer to get my iTunes to open. Does anyone know of a solution?

    Here are the two ways that I run apps as admin in Win 7. Would recommend trying the first method to see if it works before you use the second method.
    First: I use this one if I only need to do it occasionally (you may find this way tedious after a few days). Right click on iTunes and the context menu will pop up. Click on "Run as administrator" then another popup will open asking you to confirm if you want to allow iTunes to have admin privilleges (this happens every time any app requests higher privelliges), choose yes and if our issues are the same iTunes should load.
    Second: The semi-permenant method, again I'd say try the other method first to see if this will work for you. Right click on iTunes like before but choose Properites, then go to the Compatibility tab. At the bottom you have the ability to give iTunes admin privilleges every time it loads. Check that box, then click apply then OK. You will still see the box I mentioned earlier (I can't get a screen shot of it) asking if its ok to run with higher rights, but this way is a couple of clicks less.
    Let me know if you have any more questions.

  • Iolo System Mechanic app failed and has caused FF not to act right - not loading buttons and some web pages to be a list instead of what the UI should look like.... I have reinstalled but still have the problem and not sure what to do

    Basically certain web pages are not loading proper since app Iolo System Mechanic failed. I have reinstalled FF but still not loading right. Buttons are not showing and some pages are in a list instead of the GUI view.

    I installed and uninstalled Firefox several times - finaly after I selected NOT to have Firefox as the default browser, the installation worked and pages loads correctly now! I made Firefox the default browser after the successful installation!

Maybe you are looking for

  • Terminating Event in PO Release Workflow. Workitem is not terminating

    Hi WF Experts,                         I have done Purchase Order Release Workflow with 10 level release With 2 days dead line. Since standard release supports only 8 level release i have opted for Role Resolution Via User Exit 9 . and i am picking r

  • Best practice SSL End-to-End in Exchange 2010 CAS loadbalancing

    Hi, I was wondering if there is a best practice for deploying SSL End-to-End in Exchange 2010 CAS loadbalancing. We have ACE modules A5(1.1) and ANM 5.1(0), although there seems to be a template available in ANM it doesn't work. It throws a error whe

  • Can't Add 2 of 3 host clusters' C/SystemState drive etc to a Protection Group

    I originally had my Cluster host servers added to one protection group and backing up at the same time, but this was causing some lag on the VMs due to the fact that all the hosts were being backed up as the same time.  So I removed them from the exi

  • Failed to send request/response to peer. send() failed with error code 32?

    hello, chris: recently we check the tterros.log, we found the following erros: 2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32 2009-11-12 09:48:

  • External keyboard problem

    I have a strange, reoccurring problem with a MacBook Pro when attached to an external keyboard: suddenly the computer reacts to keyboard input as if the Cmd key is being pressed at the same time (although this is not the case). Just pressing the tab