Still Having BBC iplayer Issues

Why is this happening on a 50mb Infinity 2 renewed supposedly unrestricted in any way connection using a wired connection? Is it BT or BBC? I ran the BBC speed test and it came back as fine.

Neolithic wrote:
Managed to watch it all eventually but it shouldn't be happening, whatever the content. We pay a highter price to avoid issues such as this.
Wish I was smart enough to even think about being a part of Anonymous
Turning up to events and supporting Anonymous makes you part of it, any service is welcome.
Anonymous is a symbol for freedom of speech and equal rights.
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Similar Messages

  • Getting the error message"your apple ID has been disabled" . I reset my ID password last night and am still having the same issue.

    getting the error message"your apple ID has been disabled" . I reset my ID password last night and am still having the same issue.

    If you are still unable to access your account after resetting your password, you will need to contact iTunes Store Customer Support via http://www.apple.com/support/itunes/contact/

  • UK BBC iplayer issue

    Does anyone have a issue when watching a downloaded programme from BBC iplayer?
    The programmes download fine, but when I watch them, it plays for about 6 seconds, freezes for 2 seconds and the plays, but continues this process all through the programme. Also when closing down iplayer it does not close properly and just hangs. Very frustrating and I have never had this issue on any other android phones.
    I've checked all my settings and all looks OK.
    Any feedback would be appreciated.
    Solved!
    Go to Solution.

    Yes, you are correct, it does do what iplayer states, which is play normally for about the first 30 minutes and reverts back to freezing etc.
    I do hope Google sorts this out, as this is adding to the things I don't like about Sony and the Z3.
    May get to the stage of me ditching it and going back to a Nexus 5.

  • Is there another bug fix coming soon. IpadAir, iPod and iPhone are still having many, many issues even with the last update. IOS8 has been a disaste! 

    Many features are still having issues, including basic iPad, iPod and iPhone functions that used to be rock solid. When can we expect the next SW releases?

    The Real Big Mac wrote:
    Many features are still having issues, including basic iPad, iPod and iPhone functions that used to be rock solid. When can we expect the next SW releases?
    What troubleshooting steps have you taken?

  • Still Having Video Resolution Issues

    After latest software update only able to get 1024x768 with a couple of annoying lines of distortion on left side of screen. Xbox 360 and new Sony media player can be adjusted to use screen to full potential. Would sure be nice to be able to adjust video on Apple TV 2. Family really likes ATV2, besides this video issue.
    Make: Panasonic
    Model: TH-50PHD8 (plasma)
    Connected: HDMI to DVI input (w/ HDCP)

    Chenks wrote:
    you are using an unsupported method of connecting it to your TV.
    HDMI>DVI conversion is not supported by apple.
    But the problem is not with DVI (HDMI to DVI is no conversion, the video signal is the same) but with the implementation of the HDMI specification Apple is doing with the ATV2. Other devices with HDMI to DVI cable or adapters are working, so it must be possible with the Apple TV 2. There is even no need to support DVI only TVs, it will just work when the HDMI specification is fully implemented. And the more it should work if those affected TVs support HDCP over DVI. Even Mac OS X recognises my TV (it shows Philips FTV in the System Preferences in Displays) and is offering the possible resolutions for my TV (480p, 720p, 1080i, and some more). I sent feedback to Apple via http://www.apple.com/feedback/ 2 times already, explaining about my TV and the possible resolutions and refresh rates.
    I still believe it is possible to solve all those resolution problems with the ATV 2 via firmware update, and this will also include those with DVI only TVs, even without the need to specifically support it. There are so many articles in different threads here about various problems with the connection of the ATV 2 to different TVs, even when there is only HDMI involved.
    Edwin.
    Message was edited by: Edwin Cikan

  • HT5654 Hi, I have tried to update my itunes the way i usualy would but this has not worked. I have uninstalled it and then reinstalled it and I am still having the same issue. It keep saying that there is an error with the apples mobile device.

    Hi, i have tried to update itunes in the normal way as when i opened it, it said that there was an update available. However it would not let me saying that the was a mobile device error. I have unistalled and reinsatlled it and I am still getting the same error. Does anyone know how I can fix this?

    You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.

  • Still having WiFi connectivity issues. What can I do to fix this?

    I have the new Macbook Air 2013, and since day one i have had WiFi connectivity issues. I know that this problem has been worked on and that a recent release of an update could help fix this problem. However; nothing for me has changed. I connect to my home internet and sooner or later my MBA disconnects and i have to reconnect it by either turning the WiFi on and off or going into network diagnostics. The time of my Air actually being connected varies from a coulpe second to a couple minutes and occasionally I may get 30 to 45 minutes before a disconnect.
    If you could help it would be much appreciated.

    That statement is unfounded, actually. ALL of those currently with wifi issues are able to connect via their iphone hotspot, or by means of their homebase AIRPORT base station, .....indicative of a software/ firmware issue.
    Most dont consider a minor software/firmware issue an empirical defect, anymoreso than "forgetting something" is an empirical defect in a human being is.
    The "speaker issue" is now uttterly proven a simple software issue, soon to be fixed, same is the case with the wifi issue.
    You're forgetting that Apples 802AC  wifi is "next generation"  'tomorrows' technology. That a minor bug exists, soon to be fixed, is understandable.    Look on the bright side, ....the Macbook AIR is #1 seller and most beloved superbook out there for many reasons

  • U330 Bios v.68? Anyone still have this available? Still having white bar issues.

    Requesting u330 bios update v.68 beta.
    Had put away the u330 into storage last year thinking it was unfixable due to a broken LCD.  Learned through reading through the massive discussion, http://forums.lenovo.com/t5/Windows-7-Discussion/U​330-Windows-7-Drivers-Problem-amp-Solutions/td-p/1​... , it was fixable bios/driver issue concerning the graphics cards.  The link for the v68 bios update no longer exists on the thread.   
    What I did: Per instructions, Flashed with v.67 (latest from Lenovo website). Then fresh install of Windows 64 and updated everything through Windows.
    This fixed the power issue and most of the white bar issue. There are a few lines that pop up sometimes and the bar sometimes flashes on and off depending on the graphics use. For example, when I wash something on youtube or hulu. 
    New issue: Doesn't detect the discrete ATI card.  Only the integrated Intel card is shown on device driver and the bios doesn't allow me to enable vtx/discrete card or whatever. ATI is nowhere to be detected. Tried installing ati and the new amd catalyst drivers and neither can detect the driver either. 
    Reading through the thread indicated that the bios 68 beta would solve my the switching issue and the remaining white bar issues.  So I gotta ask. Does anyone have it available????

    I can't imagine that it is really a hardware problem... It only happens for me when there is some kind of moving graphics on the screen and it isn't at the front of the windows or switching between windows. And it all kind of depends on whether I'm running programs with moving graphics or am at websites with graphics/video. For example, if I go to the Hulu homepage (which has a changing banner) and then simultaneously open the start menu or a folder in windows, the flashing white bar appears. In this case, the moving graphics is now "behind" the start menu or the window. But if I then click on the maximized homepage again, the flashing white bar disappears. Interestingly, this seems to happen only when I use Google Chrome as my browser. I can also make it reliably happen by just going to the desktop. Pressing on the bottom of the screen doesn't help me at all.
    Given that this problem started for many people around the same time, which, to me, suggests that maybe there was a update to the graphics card or windows update that led to some kind of funky incompatibility. 
    Do other people have "symptoms" that are as specific as mine? Maybe we have multiple problems here ...

  • We had a tower problem in our area and now I am unable to sign into my google account on my phone. I have tried to remove my account and set it up again, but am still having the same issue. It does not let me sign in keeps saying that sync is not respondi

    I am unable to sign into my google account after a tower being down. Any ideas

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Cannot forward or send emails. I have deleted and re-added the acount still having the same issue.

    helpppppp

    Hello RonYuval,
    The following article provides further troubleshooting steps that can help get your mail account working.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Cheers,
    Allen

  • Anyone else still having iOS 8.1 Bluetooth Connection issues.

         Hi there just wanted to see if anyone is still having the Vehicle "Hands Free" Connection issues via Bluetooth on the iPhone 6? I drive a 2009 Acura TL and I am still having the connection issue. Oddly enough before the 8.1 update I was running 8.0.2 and it worked fine. Now when I get in my car and the phone connects it cripples the entire system. It won't allow me to change to the USB mode for my connected iPod and when I try to place a call via the "Hands Free" system it beeps as if it is activating and then does nothing.
         I have tried everything that I can think of with no results. I was hoping there was someone out there with the same car or similar having the same problem that might have found a fix. Chime in and let me know.

    I am having similar problems with Bluetooth connectivity but not with a car.  I use a Planatronics Legend.  Everytime that a call comes in, my Legend announces the call then immediately disconnects from my iPhone.  All of this started after upgrading to ios 8.1.
    Apple should not advertise fixes to problems without truly confirming the repairs.

  • IPhone 3G running 3.1.2 still having intermittent loss of data services

    My wife's 3G is randomly indicating that she has no internet connection, so she can't get data and/or send SMS messages. Even though she's in a spot at work where it used to always work fine.
    Her 3G has the latest 3.1.2 firmware and has gotten all of the updates from 2.0 to 2.1, all the way up to 3.1.2.
    I think people that have the earlier 3G's and have gone through multiple updates seem to be having the most issues.
    Let me know if anyone know of some way (ANY WAY) to fix this. Again, she has a 3G running 3.1.2 and has applied updates from 2.0 on up to 3.1.2...with instability issues showing up first with 3.0.
    I personally have a 3G (just as old) and have gone through almost the same updates, BUT...I didn't update from 3.01 to 3.1. My 3G began getting squirley (Safari crashing with muliple tabs open and general lag doing text entries...stuff like that) after I updated to 3.01 (or was it 3.0?), so I held off doing any more updates until the coast seemed clear to do one. I'm glad I held off as the 3.1 updates made matters worse for my wife and many others.
    3.1.2 still has issues. I'm sure the phone hardware is fine, but installing multiple updates over each other seems to create instabilities.

    Here is my post when I first started having problems with the 3.1 update:
    *+Model: iPhone 3GS 16GB+*
    *+Location: Los Angeles+*
    *+Firmware Version: 3.1+*
    *+Symptoms after installing 3.1:+*
    *+Battery Issues - Since upgrading to 3.1, battery life has become dismal. If leaving the house in the morning at 8am, by 2pm or so, phone is down to 10 percent or less with minimal to no browsing. Before, 3.1, iPhone would last at the minimum 24 hours with medium browsing and multiple text messaging.+*
    *+Texting - Text message sending is non-existent. All text messages fail on send. To alleviate situation, I must reboot phone and then it works for an hour or so. Before 3.1, text messaging worked flawlessly with text message failure once every 50 or so text messages.+*
    *+Reception - Signal strength has gone from great to really bad. I've always had reception at work. Now, nothing. Calls don't come through and go straight to voicemail. Before 3.1, reception was perfect. No dropped calls, no reception problems, no phantom calls.+*
    *+Syncing: Multiple problems trying to sync phone to computer. "Disk cannot be read" errors as well as freezing on initial sync. Before 3.1, never had syncing issues.+*
    *+No freezing issues or shutdown issues experienced as others have stated.+*
    *+I went to St. Louis this past weekend and discovered that to alleviate the situation, I have to turn off 3G (Settings>General>Network). Phone is now only on EDGE network. Works fine but it shouldn't be like this. If 3G is turned on, iPhone moprhs into doorstop/ throwing weapon.+*
    *+I don't believe the phone itself is the problem. It's firmware based. Seems like there's a conflict with the firmware and the 3G network. I am an end-user and do not have a technical background.+*
    After upgrading to 3.1.2, I'm still having the same issues. The only way I can get my phone to function is by disabling the 3G. I'm currently using Edge. IN laymans terms, this is ********.
    Message was edited by: prince.buster

  • SO 8.0 + prod.updt 2 ... ... still having difficulties

    Dear All
    Anyone else is having difficulties with SO 8.0 (prod.updt. 2 installed)? StarWriter
    It seems I can not do same things with 8.0 than with 7.2. For instance, I use almost all toolsbars & buttons, so, from 'View --> Toolbars --> Customize I practically activate most of toolbars & buttons. Once I finish my session I close SO 7.2 (obviously) and when later or next day I open again SO 7.2 all toolbars stay where "I left them"; this could sound funny or silly, ... but it's not the same with SO 8.0. It does not matter how many times I open StarWriter 8.0, I activate all toolbars and buttons, anchor toolbars ... ... after I close SO and reopen all toolbars have vanished. And this is quite nasty.
    Next thing, with 7.2 'Export as PDF' function is great even for large docs. 500 or more pages. With 8.0 ... ... wow! forget it.
    So I do not mind wheter I have to wait for more patches to correct it, because hopefully I have 7.2
    In the meanwhile, I wonder if there's some settings or 'clics' somewhere and I still have not seen them.
    I should really appreciate some help or directions on these subjects.
    By the way, I apologize for my aweful English Grammar.
    Best Regards
    Pedro

    Here is my post when I first started having problems with the 3.1 update:
    *+Model: iPhone 3GS 16GB+*
    *+Location: Los Angeles+*
    *+Firmware Version: 3.1+*
    *+Symptoms after installing 3.1:+*
    *+Battery Issues - Since upgrading to 3.1, battery life has become dismal. If leaving the house in the morning at 8am, by 2pm or so, phone is down to 10 percent or less with minimal to no browsing. Before, 3.1, iPhone would last at the minimum 24 hours with medium browsing and multiple text messaging.+*
    *+Texting - Text message sending is non-existent. All text messages fail on send. To alleviate situation, I must reboot phone and then it works for an hour or so. Before 3.1, text messaging worked flawlessly with text message failure once every 50 or so text messages.+*
    *+Reception - Signal strength has gone from great to really bad. I've always had reception at work. Now, nothing. Calls don't come through and go straight to voicemail. Before 3.1, reception was perfect. No dropped calls, no reception problems, no phantom calls.+*
    *+Syncing: Multiple problems trying to sync phone to computer. "Disk cannot be read" errors as well as freezing on initial sync. Before 3.1, never had syncing issues.+*
    *+No freezing issues or shutdown issues experienced as others have stated.+*
    *+I went to St. Louis this past weekend and discovered that to alleviate the situation, I have to turn off 3G (Settings>General>Network). Phone is now only on EDGE network. Works fine but it shouldn't be like this. If 3G is turned on, iPhone moprhs into doorstop/ throwing weapon.+*
    *+I don't believe the phone itself is the problem. It's firmware based. Seems like there's a conflict with the firmware and the 3G network. I am an end-user and do not have a technical background.+*
    After upgrading to 3.1.2, I'm still having the same issues. The only way I can get my phone to function is by disabling the 3G. I'm currently using Edge. IN laymans terms, this is ********.
    Message was edited by: prince.buster

  • I'm having lots of issues with Dreamweaver CC on my 2nd monitor.

    I cannot open new files, or create new files... the pane doesn't display. Works fine on my Macbook Pro Display, but not on the 2nd monitor using Thunderbolt. I also have lots of odd behaviors when attempting to edit code. The selection jumps all around... I tried uninstalling and reinstalling fresh, but still having the same issue. Has anyone else been experiencing this?

    According to Adobe staff, a problem was introduced in Yosemite that is causing funkiness with secondary monitors is what I meant.
    It seems related, not that it's the same exact issue.
    Personally, I'd roll back to an older version of DW if that second monitor was necessary to my workflow within the program until Adobe or Apple push a patch.
    Make sure to file an official bug report: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Still having data problems after all the fixes. Should I wait to return?

    Hi there, I've had the Thunderbolt for about a week now.  I've been having the data connection problems like everyone else, especially right after I end Internet Connection Mode.
    I did all the fixes, like factory reset, dialing the *#*#4636#*#* and the ##778 options, but to no avail.  I can only guess it's the network that's having problems.  I live in Spokane, WA and I know that they're probably testing out 4G in the area, so this might be the reason why the phone may be having connection problems.
    But what should I do?  What will happen when 4G turns on and yet my phone still has the connection problems?  Will I be out of luck, since I'll be out of my 14 day return window?  Overall, I still like the phone, but I don't want to keep it if there's somthing wrong with the phone itself.

    JaySean wrote:
    i also had data issues, i called them but they said the sim card is fine. I'm still having alot of issues here to the point where im contemplating getting the iPhone 4
    I'm sure they did say it was fine and in that techs opinion it might be but that tech or csr might not have the proper training or knowledge of what you or HTC is asking them to do. Example: I called and told them to reprovision my sim card and the first tech I got then instructed me on how to clear my cache and internet history. So I called HTC back and they told me "no that is not a sim card reprovision and to insist that a tech do the procedure". So I called vzw tech support again and requested the same thing " reprovision the sim card " and what do you know the tech said ok no problem. 
    If they do what your asking they will have you power down the device > remove the battery > pull the sim card out > wait > then reinstall everything > and power up the device. After that they might have you check a few settings and your done. 
    So don't let a CSR that doesn't know how to address this issue give you bad feelings toward your Thunderbolt. I will admit that at first I was a little upset about the issues I was having and started to think I was going to have to deal with it till the next 4G device that I would consider a reputable replacement came out ( cause I won't go to an Iphone ever ). Now that I've had my T-Bolt for a few weeks you can't take it away from me. My issues with it have dwindled and my love for it has sky rocketed. 
     But if you want to jump ship for a 3G, tiny screened, locked down, no widget, pay for everything, itunes, update via usb, soon to be / already out dated, expensive device then more power to ya. In few months when updates roll out and when gingerbread becomes available for the T-Bolt you'll be looking over the shoulders of those that stuck with it and say " I wish my phone could do that ". lol I kid but seriously stick to your guns and demand VZW to the reprovision because if it does for you what it did to my T-Bolt you will regain confidence and love this device. 

Maybe you are looking for

  • Apple DVI to video adapter problem

    Hello I have a problem this FPS in 10.7.5 then I use dvi to video adapter 480i  FPS 25 good 720x576. FPS 25 good 1024x768 FPS 12.5 ???? FPS I see in QC, modul8 , vdmx  programs MacBook Pro 4.1

  • Urgent Need for Freeing space on time machine

    unable to free space on time machine for backups. Unable to see option to delete various backups by right clicking on the file name in the list on the right side of the screen. I clicked on the "gear icon" on the actual picture of the backup in Time

  • Post processing of defect records from automatic Goods movement

    During the run of COGI transaction, we got the List of all goods movements with errors.The list of errors can be <b>saved at once</b> and the other option is <b>save for background</b> (when we choose option List-> Save-> Save at once or Save for Bac

  • Work Flow - FCE to QT then compress and convert to AVI for web upload

    I am creating movie clips that will be 5 to 10 min in length to be streamed on my website. At the current time, my CMS (content management system) for the web cannot accept H.264 (MP4) files, but can accept FLV, AVI and WMV. So, given this constraint

  • Same loop, different result

    The function below contains two virtually identical for..in loops. The first one produces the expected result, the second one only returns the last value of the object. Output: first loop 0 => [object LED] 1 => [object Math_Add] 2 => [object Math_Mul