STILL having permissions trouble with 7.2 and vista premium.

I thought permissions was supposed be fixed in the 7.1 update?? I downloaded that and i still was having the 'You do not have write access' window when i tried to connect my ipod.
So i waited for the full vista version, 7.2. Which i just downloaded, and i still cannot sync my iPod. Nothing will copy to it. Still getting the permissions dialog.
Im so ****** off that i waited all this time, and it still doesnt work.

Mark, you need to have a bit of patience. No one here gets paid to help; everyone is just a fellow user, helping out as they have time, knowledge and inclination. Reposting multiple times in less than half-hour isn't likely to get you a response more quickly, and it just a bit rude. I know that it's frustrating, but hang in there and with luck someone will offer suggestions within a few hours.
Good luck.

Similar Messages

Trouble with itunes upgrade and Vista

I upgraded to 8.0 last night. The upgrade seemed to go as normal, but all I have is a blank itunes icon on my desktop which doesn't work. I reinstalled and still the same thing. Any suggestions?

This happens to me every single time I upgrade iTunes since as far back as version 6.x I think and its happened on both Vista and XP PC's.
Every single time I upgrade it does something with the desktop and quick launch icons to where they get "blanked" out and are no longer valid. This forces me to re-copy the "Start Menu\Programs\iTunes" shortcuts (that are created by default with the installer) back to the desktop and quick launch every single time I upgrade.
Does anyone know why this happens? The iTunes installation is the only program Ive ever seen this issue with and its really gotten pretty annoying.
Thanks a bunch!!

(Cross Post! SORRY!) Having trouble with Mac Pro and Vista/Boot Camp

I feel like this board is more populated, so I thought I'd post this here as well. Forgive me.
Ok, so it took me forever to install Vista. It kept saying my partition wasn't valid even after I'd format it. After restarting like 15 times it finally went through. So, it installed.
BUT, now I have two issues. When Vista starts, I get this weird jumble of like MS-DOS text talking about partitions, weird numbers, my monitors just flash and kinda go nuts with the text then at the top after like 10 second of text, it says 'booting windows vista' with more ms-dos text. Finally after 30 seconds of that, it shows me that green bar that shows up to load Vista then voila, Vista is up and running. The OS works fine, but no matter what, I go through that jumble of text. Any way to get rid of it? What's wrong with it?
Also, now that I've installed Vista, I can't get back into OS X. I have a wireless PC keyboard and a wireless bluetooth Apple keyboard, so I don't know what to do. When I go into Vista's Control Panel to select Startup Disk it says it can't load the program. So I'm at a loss. I really wanna get back into OS X!
Any help would be fantastic!!

Ok, I fixed the issue by using the wireless PC keyboard. I put the Vista install DVD in the drive and restarted the computer. The computer wouldn't recognize the OS X DVD.
I remembered that the computer would register the keyboard inputs after restarting from the Vista Install Screen, so I restarted, held down alt on the PC keyboard and it worked!
Now with the apple keyboard working, I restarted and reset the PRAM which made the computer boot into OS X by default instead of Vista.
BUT, I still get that weird DOS text every time I load Vista, and now after keeping Vista running for a few hours, it starts kinda glitching over time. It loses connection with the network (I had to physically unplug and plug back in the ethernet cable to get it to recognize the network) and for some reason in order to use my apple keyboard, I have to turn it off and on when I get into Vista. It's annoying.
Anywho, if anyone can help me with my Vista problems, that'd be grand :P

Having Installation troubles with Adobe Flash and Reader

While downloading the Installer I get a "failed to initialize" warning at 50%. I've disabled my antivirus, and my firewall and I still get the same message. I'm in the process of updating my girlfriends laptop and these are the last two things I need done. any help?
Thanks;
Krazy2DKore
[spam link removed]

If you ever need to download them again, here are the offline installers (which won't produce messages like you received)
Flash Player: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Adobe Reader: http://get.adobe.com/reader/enterprise/

Having some trouble with importing audio and editing it in iMovie (iLife '11)

Hey guys. Hopefully some of you will be willing to help me with my problem.
Basically I have a video that I've imported into iMovie just fine, and I have a separate audio file that I want to lay over the video. I've figured out how to do this (throw the audio clip into iTunes, then import audio from the iTunes library browser within iMovie). My problem is that I want to have the audio clip I've imported from iTunes come in at a certain point on my video clip, and I want to completely mute the video's sound so that I can ONLY hear the audio clip I've imported from iTunes when that starts playing.
If anyone can help me on how to do this, or if I was confusing and anyone needs clarification please let me know and I'll do my best to replay as quickly as possible.
Thank you very much for any and all input!

Drag your audio track from the Music Browser directly onto the point on your video clip where you wish the audio to start. Don't drag it into the background, but onto the clip thumbnail in your Project. I'm assuming that you have already created a Project and dragged clips from the imported Event. All the editing has to be done in the Project - not the Event.
You will now see a green bar (ribbon) beneath the clip thumbnails, representing the inserted audio. If you click on the small waveform icon at the lower right below the Project thumbnails panel, the audio waveforms will appear (coloured light and medium blue).
You can slide the audio back and forth. You can trim the ends by hovering the playhead (red vertical line) over either end of the green bar until you see a cross-hair icon - click and drag inwards or outwards (subject to audio being available at either end). You can also click on the small gear icon at the start of the audio track and select Clip Trimmer - here you can trim the ends by dragging the yellow handles whilst viewing the corresponding video.
You can split the audio - place the playhead at the proposed split point on the highlighted audio track, right-click (or Control-click) and select Split Clip from the pop-up menu.
If you click on the small gear icon at the start of the track, you can select the Clip Inspector. Click on Audio Adjustments. Otherwise just double-click the green bar and select Audio from the Inspector. In the Inspector you have many choices for editing audio, such as, volume levels, ducking, fading, enhancement, equalizer settings and so on.
You can mute the original audio by double-clicking the video track (or using the gear icon), then reducing the volume in the Inspector's Audio tab. Another way is to use the Ducking feature. Open the Inspector for your added audio track and move the Ducking slider to the zero position - this will mute all other tracks running in parallel with the track you've inserted.
You can easily fade audio tracks in and out without using the Inspector. Open the waveforms by clicking on the waveform icon (as described earlier). At each end of an audio track you will see a small greyish coloured box as you hover over that area. Click and drag as far as you want to create an audio fade. As you do this you will see the waveforms drop in volume.
You can also select sections of audio in the audio track. In the bottom half of the audio track (with waveforms selected) click and drag to surround the selection with a yellow border. Now you can click on the volume line to adjust the volume up or down for that section. Drag the yellow dots to extend or reduce the fade on either side of the selection.
Hope this helps! I think I've covered the essentials.
John
Message was edited by: John Cogdell

Having HUGE issues with captivate 4 and vista- receive MP3/wav error messages and 0x80070005 error codes- Is there help out there?

Just uploaded Captivate 4 Educator Version to my vista machine (Dell XPS M1530). When right click Captivate 4 in admin mode, Adobe Acrobat 9 loads/configures. [Question- Why does this happen every time, and can I stop?]. I then I import my ppt. Then all the wav files embedded in the ppt come up with another error message unable to decode and import the selected wav/mp3 file. Then when I go to do text to speech, I can pick out the person "Kate" but I also get the same error message- unable to decode and import the selected wav/mp3 file. HELP! There has to be another person out there that has had a similar issue.

Hi there
Seeing as you just installed, have you appliled the update? Click Help > Updates... to check. If that option fails, try visiting the updates page at the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Trouble With Opening InDesign and now Photoshop and Illustrator

First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

The versions I am using are the CS6 versions.*

Trouble with internal keyboard and touchpad

Hi,
Yesterday I just out of nowhere started having some trouble with my keyboard and touchpad on my MacBook Air.
The problem displayed itself on various ways. One thing was that I couldn't press regulary with the touchpad. When I was pressing one time, it acted like a pressed with two fingers. When I tried to type in my password on the administrator page, some of the keys didn't work at all and some started to act weird. For example when I was pressing the letter B, the "bar" which displayes where you are in the text (don't know the word in English) went backwards, and when I pressed the letter F it went forward. This seemes so weird and also gives me a hope that it might be some setting failure though B stands for backwards and F stands for forward.
I could log in to the guestpage where I tried to write in "notes". In notes, no letters at all was working, only numbers. When I tried to shut the computer down from the apple symbol I was asked to write administrator name and password. When I tried to mark the name to write it, there wasn't a "bar" but a cross, but on the other hand did it work to write in the password field. But of course not B and F..
Usualy I'd just press the on/off botton until the computer lockdown, unfortunately the botton doesn't work. So the only thing I could do was to let the battery die and hope that it would start when I recharged it and pressed start, this didn't go as well as I hoped, so now I'm stuck with a dead macbook air.
Any ideas of what could be the problem or/and any solutions what might do the trick?
Extremly greatful for any answers

Yes you need to use a wired keyboard.

TS3276 I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Having trouble with wav files and sample rates

Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy

You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

I'm having trouble with iTunes synching and accessing the iTunes store.

I'm having trouble with iTunes synching and accessing the iTunes store. When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del. When trying to access the store, the progress bar stops halfway. I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
Any suggestions will be appreciated, it's getting realy frustrating.
Cheers for now,
Marty

http://support.apple.com/kb/HT1923?viewlocale=en_US
this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

Ive got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

i ve got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

Often a Restart and a Reset will resolve these issues...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On...

HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

I'm having a trouble with my iPhone iMessage.

I'm having a trouble with my iPhone iMessage.
I cannot send any pictures through iMessage only to my friend who's using iPhone4s.
iMessage without a picture goes well.
When I used iPhone5, everything worked fine.
But after I change my phone from 5 to iPhone5s, it's not working well.
please help me.
(sending pictures to friends using iPhone5&5s is working fine. It just not works with that friend(who is using 4s) only.)

Try this on the iPhone 5s go into settings turn iMessage off wait about 60 secs then turn it back on...under iMessage you will see it say waiting for activation...when it changes it will give a message that says iMessage can be sent blah blah blah...after you see that you will see an option that says send and receive ...click that...it should bring you yo a page that say you can be reached by iMessage at you should see you phone number with a check mark..it will be light grey...don't worry about signing into you Apple ID... You only need to do that if you are connecting you iPhone to another device (Mac, iPad, iPod touch) to receive the same iMessages on both...after that go back to the first message settings page again and at the bottom you will see mms messaging turn that off then back on....after that's done..tap you home key and send a test message
If it still doesn't work follow this http://support.apple.com/kb/ts2755

I'm having big trouble with my new mainboard: Part II

Hi
I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
-Krelian

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

STILL having permissions trouble with 7.2 and vista premium.

Similar Messages

Maybe you are looking for