Still having problems with dark prints in lightroom and photoshop

Below is a quick comarison of prints out of Aperture on the left and Lightroom on the right.
I have my monitors calibrated and my printer 3800 profiled.
I am not double proofing.
I also put the print adjustment slider to 25 on the lightroom print.
Although the photo below is not an accurate representation you can see the the colors and saturation are compleatly different.
And the one from Aperture matches my monitor!
Now I switched to lightroom because of the rendering of the raw files and the amout of adjustments that can be preformed, along with profiling cameras.
What I am now doing is processing in Lightroom exporting to Aperture to print and load on to my iPad.
Not a great workflow!
Anybody got any suggestions?

What are your print settings? Managed by printer or using a profile in Lightroom? Are you using the correct profile for the paper? What version of Mac OS? Are you using the very latest printer driver for your printer? I.e. more info needed. My prints from LR come out identical in tone to those from Aperture.

Similar Messages

Still having problems with Yahoo's Music Service and my Zen Mi

I think I did a pretty good job searching the forums for a solution to my issue, so please don't flame me if I missed something
I'm having major licensing issues with Yahoo's Unlimited Music Service, even after doing the following:
. I'm running Windows XP SP2 (all updates accounted for and installed)
2. I'm running Windows Media Player 0
3. I installed the Windows DRM patch for this issue: KB8922
4. I upgraded the firmware for my Zen Micro from the factory setting to .02.05
I'm still getting errors in MediaSource stating that a license is required to transfer the file I downloaded from Yahoo Unlimited. I get similar errors when trying to transfer in Yahoo's Music Engine.
I read in the forums that firmware version .02.05 is more recent than 2..02. Is this correct? If so, shouldn't version .02.05 have all the enhancements and functionality found in v2?
In any case, this was a gift to my wife for her birthday, and it's currently useless to her at the moment, so any help you can offer would be greatly appreciated!
Thanks!
T.

Thanks for the quick reply, Jason.
I've tried updating from .02.05 to 2..02 several times (although other posts on this forum suggest that this shouldn't be possible). After the dri've on the Micro is formatted during the upgrade process, I get an error when the unit tries to reboot stating that the unit 'can't be started correctly', and that I should reboot and start the process over. The update process fails in the same place every time.
I've tried disabling the Enable Detector feature in MediaSource before updating, but that doesn't help either.
Now, I'm guessing that the only way to upgrade to 2..02 was from .0.03, but I evidently chose poorly. Is there <EM>anything</EM> I can do, or am I stuck with crippled functionality?
Thanks again for your help!
T.Message Edited by terrylar on 05-9-2005 04:6 PM

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Hi all, I'm still having problems with my security questions as they were not the ones I answered. Now I'm confused

Still having problems with my security questions as they were not the ones I answered and now I'm confused.

Howdy Paul,
If you are having an issue with your Apple ID security questions, you can reset them using the steps in this article -
If you forgot the answers to your Apple ID security questions - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Still having problems with wireless connections with the new lions os

is anyone else still having problems with there wireless connections on the new lions os? What a poor job apple did

No.

Still having ******* problems with downloading apps

Still having ******* problems with downloading apps

I know. Alot of people think that 1.1.2 solved it. Looks like it didn't.
lenn

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

HT201210 I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

simply try doing a back up and restore
when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
good luck !!

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit. What can be causing the issue?

Hello, please checkout my post concerning lagging issues.
I've also provided a link to a video I've recorded showing the Illustrator behavior on my iMac 27"
Adobe Illustrator Cs6 Lagging Extremely Slow on Yosemite 27" iMac i7 late 2013

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

Having problem with the printer with type "PDF Publisher"

Hi,
We are having problem with printing PDF reports with print style as "PDF Publishrer". The concurrent program errors out after it generates the report. But when we try that with style "PORTRAIT" then it prints successfully. We have tried with a number of printers and a number of reports. The results are same. So my understanding is it has something to do with the printer configuration from the EBS side.
Any help in this regard is highly appreciated.
Pratap

Hi Hussein ,
Thanks for the response. The details are provided below.
The application is R12.1, Database 11.1.0.7, OS is Solaris 10.
The database characterset is US7ASCII.
The printer type is --PASTA Universal Printer Type
The log file does not give any error but the program completes with error. I am coping the log file below.
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RAXINV_SEL module: Invoice Print Selected Invoices
Current system time is 20-JUN-2011 14:23:10
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='10100'
p_trx_number_high='10100'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 96
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10100
MSG-00010: 14:23 1 Transaction: 10100
Report Builder: Release 10.1.2.3.0 - Production on Mon Jun 20 14:23:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 895365 on node PAUPRJ01 at 20-JUN-2011 14:23:48.
Post-processing of request 895365 completed at 20-JUN-2011 14:23:51.
------------- 2) PRINT   -------------
Printing output file.
Request ID : 895365
Number of copies : 1
Printer : SPOT
##################################################################

Still having problems with dark prints in lightroom and photoshop

Similar Messages

Maybe you are looking for