Still having trouble with update

A month ago I tried updating to iTunes6. Once that occurred it told me that I needed quicktime 7.0.3 and that I have 7.0.2. I've tried uninstalling and going back to the cd software...but then my music won't play. All my music will be in the library, but it won't play. So then I redownloaded iTunes6 and the original message comes up. Can you send me a patch or send me an older version of iTunes? I can't update my mini without it.
Thanks,
Lexi
  Windows XP  

hi Lexi!
you're actually not talking directly to Apple. this is a user-to-user troubleshooting forum. see:
What is Apple Discussions?
Once that occurred it told me that I needed quicktime 7.0.3 and that I have 7.0.2.
for that one, let's first try a careful standalone QT 7.0.3 install.
download and save to your hard drive a copy of the QT 7.0.3 installer. (we'll run the install from there rather than online.) switch off any antivirus and antispyware applications prior to the install.
Quicktime 7.0.3 Standalone Installer
if you get an error message on the standalone install, let us know what it says. (include error message numbers if you're getting any.)
if the install goes through, does your itunes launch again?
keep us posted.
love, b

Similar Messages

  • Are people still having trouble with iPhone/HP Laptops?

    Since I've had my Envy I've had no end of trouble with getting it and the iPhone to play nice. Any my search continues. So far, I have updated every bios, reinstalled Windows 7/iTunes many times, have restored the iPhone far more times than I care to remember and I am STILL having troubles with this thing. Having got through the Syncing issues with the PM55 chipset and iPhone I can now sync with my laptop. However all is not well as it would seem that I cannot sync my photo's. It doesn't matter if I have 0gb, 15gb or 30gb free, iTunes is telling me that there is not enough memory available. This error seems like an old one and there is even some info in the Apple KB but after following all that I still can't get it to sync my photo's.
    Some info on my setup:
    HP Envy 15 (all the latest drivers installed, bios F.24) Core i7-820, 8gb ram etc.
    iPhone 32gb, ver 3.1.3
    iTunes (whatever the latest one is)
    I should add that I can sync my iPhone with an identical install of intunes on my vintage Quad core desktop PC, but as I use my Laptop a lot more (and have all my media, email, and contacts etc on it) I would prefer to sync to it.
    Is there anything that I can do? Its very frustrating to have blown $4k on this equipment and it doesn't work...

    Well I tried deleting the photocache but alas, no luck. I also tried syncing with just the photo's enabled, and it worked! So then I enabled my other media and that copied across too! I thought I was on a bit of a roll here, but now whenever I try and sync it will do one of 3 things:
    iTunes will crash.
    iTunes will indicate that there is not enough memory on the device (+9GB free)
    iTunes will remove the iPhone from the sidebar (and my computer/disk management) even though it will continue to charge.
    Interesting point to note is that it works fine (cable/iphone/itunes/media library) on my desktop and macbook. Still really disappointed that I cannot get these two to cooperate. Also still haven't got any contacts from outlook but that may not be related?

  • Still having trouble with Gallery Slideshow

    Still having trouble with Gallery Slideshow, in Live Preview it bounces to  the top of the page but not centered where I like it.
    Hope someone can help.
    Thanks

    no is not hosted anywhere Im working on a Fantasy Photography site. from the image the top one is design mode and bottom is preivew mode. But my problem is
    as you can see from the images ( red boxes )  it moves when is in preview mode and the sizes of the images change as well as you can see. I dont know why? I tried figuring it out
    but no luck. I hope this helps.
    thanks

  • Still having trouble with audio on Macbook Pro

    I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

    Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

  • Any other iPhone owners still having trouble with AMDS?

    Even with the new iTunes update, AMDS didn't install. I managed to get AMDS installed independently with someone's method of copying new directory and registry files, but it's still not allowing the driver software to be updated on my iPhone. Anyone else out there just having problems with AMDS in general?

    Good gracious. Are you "Kate" from over there in the comments section? (I'm Tony, by the way.)
    I'm a bit worried that this might be related to the issue with your USBport.inf file that popped up in the sfc /scannow results from last year. The .inf files contain instructions on how a driver needs to be installed.
    It might at this point be worth attempting the procedures described from the document we following on the scannow on fixing files that scannow cannot repair.
    [How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
    (The one issue I'm worried about with that is the result from the scannow run that suggested that there might be an issue with your System Restore. I don't want to get you into a situation where you can restore if everything turns to custard for us.)

  • Still having trouble with Adobe Flash

    I believe that I have interrogated all of the FAQ's and followed the help suggestions.
    i have uninstalled and reinstalled Flash 3 times.
    I am still getting the message "you need Adobe Flash to play this video".
    ShockWave enabled.
    You Tube works fine.
    My system:
    Windows 7 (Home Premium)
    Flash player version: 11.9.900.152
    Internet Explorer
    Any help would be appreciated.
    Thank you in advance!

    Does Flash appear to load on this page on Step 5?
    http://helpx.adobe.com/flash-player.html
    If so, what URL's specifically are you having problems with?

  • Still having trouble with NeoSpeech

    I have re-installed NeoSpeech and I am still having problems.  I read the comments about this but I have not seen anything that fixes the problems I am having.
    When I select the Kate voice it works, but if I select the Paul voice you don't see that short processing status, and no audio is created.  It selects the Paul option in the drop-down, but there is no audio.  If I create audio with Kate, then switch it to Paul, nothing happens and the voice remains Kate.  As I said, I reinstalled but nothing changed.  What else should I do?
    To Adobe: Does this feature have bugs, or should it be working?

    no is not hosted anywhere Im working on a Fantasy Photography site. from the image the top one is design mode and bottom is preivew mode. But my problem is
    as you can see from the images ( red boxes )  it moves when is in preview mode and the sizes of the images change as well as you can see. I dont know why? I tried figuring it out
    but no luck. I hope this helps.
    thanks

  • Still having trouble with Adobe Viewer

    I'm still having the issue that when I have multi state objects, (state 1 is off the page, state 2 is on the page) the hidden state (state 2) is showing up on the iPad Adobe Viewer when you click the |||| icon from the menu in the upper left corner. In the overlay creator panel 'tap to play/pause' is not checked.  'Cross Fade' and 'Hide before playing' are checked. 
    Any help would be appreciated!!  thank you!

    What I was able to determine:  In the Oject States where all the states are listed.  The State where there is no object in view needs to be listed first. (doesn't matter what state number it is, just needs to be first in the list)  When I did this for all my MSO's there was no viewing problems!!  Thanks for leading me down the right path. much appreciated!

  • HT4061 hi im still haveing trouble with my ipad its not conected i must be doing something wrong tell me again how to conect my ipad

    why am i haveing trouble downloading to my ipad it froze

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Still having trouble with Adobe AIR - Trying to download free trial.

    I'm having an issue with Adobe AIR.  Last month I purchased Photoshop CS 5.5 with the agreement of a free upgrade to Photoshop CS 6 10 days after it comes out (should be today that I get the CD key, right?) and I'd like to get myself ready to just plug the key in and go, especially considering the trouble  I had actually downloading PS CS 5.5 (not too promising, eh?).
    I can see the yellow DOWNLOAD button and when I click it Adobe AIR comes on and asks me to read the license, etc.  I click AGREE and... it closes immediately.  Every time.
    I've tried on a few different browsers and don't have any anti-virus messing with it.
    Thanks for your help anyone and everyone.

    You will still need to resolve the AIR issue to install the software as we use it's components in many of our Creative Applications.  I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html.
    You are also welcome to follow the steps listed in http://forums.adobe.com/thread/981369 to initiate a direct download.  Depending on the Adobe product though you are installing you will need to have Adobe AIR functioning for a successful installation.

  • Still having trouble with low internal memory

    LG Vortex -
    I couldn't even download a 136kb app today.  It says I have 18.6 MB internal storage space available.  All of my big apps are installed on my SD card, NOT on my phone and I have cleared the cache AND all the data on single thing in my manage apps settings (which ticked me off because I am aware by doing that I have lost my place in the book I was reading....)  I do not use my phone for email at all, but I still went into gmail and cleaned out all emails and deleted the trash (less than 1MB total).  I've turned off sync on everything except backup assistant.  I can't even update my existing apps because just by signing into Google play store I run out of internal memory.
    Any other suggestions?  I'm sorry, but what a piece of trash phone.....I will be so glad when my contract comes up so I can get rid of this piece of junk. 
    Thanks in advance

    Thank you for your response.  My dialer storage is only 216kb in size, with 0 used in cache.  I don't have an SMS backup, only contact backup (backup assistant). 
    I guess I"m just frustrated because so many smart phone users watch movies, read books, etc on their phones, and I can barely get mine to run a basic app. 
    I did more paring down tonight and got it up to 21 Mb. Better than 18 I suppose
    Thanks for the suggestions

  • Still having trouble with iTunes movie rental

    Running a Mac w/iTunes 7.6. It brought down the whole movie, but just as it's about to finish, I get an error that says "We could not complete your iTunes store request. An unknown error occured (5103). There was an error in the iTunes Store. Please try again later."
    The content is still there. I've tried refreshing, etc. Still, the same error. I logged it to Apple, but got a generic reply telling me to update to the latest version of iTunes, etc.
    Anyone else getting this?

    Apple tech support said it was time/date, but my time/date were correct, and I was using the "get time from Apple" feature. So, they had me delete a folder, and they de-authorized all my iTunes. Then, when I re-authorized, it worked fine. So, problem fixed, though when I asked why this worked, the tech responded "dunno -- someone tried that with someone else and it did the trick"
    Go figure. Down side: it took me 3 days to get a fix. Up side: Apple support helped over the weekend (which I didn't expect) and the problem is fixed, so that's helpful

  • Still having trouble with Photoshop CC

    Hi,
    I've continuing to have problem painting in Photoshop, and was wondering if anyone else was encountering the same problem. The issue is not so much a brush lag
    as it is a spilt second freeze/stall just before a brush stroke. It doesn't happen continuously, just every few minutes and primarily on thin lines (5-10 pixels) on higher Opacity.
    It's very distracting. I'm tried all manner of different things after having gone through forum posts (Photoshop preferences, Wacom driver updates, raising and lowering performance).
    Unfortunately nothing seems to remove this momentary freeze. At this stage I can't tell whether it's an issue with Photoshop, the Wacom (an Intros 4), or my iMac. Everything put the Wacom
    was purchased within the last two years.
    Any thoughts or suggestions would be greatly appreciated.
    thank you,
    Dave

    My Intros 4 is close to five years old, and I'm wondering if it's age is the problem. Overall, Photoshop/Wacom work but it just seems to freeze/delay when I either use a fine pixel size, or go to another section of the screen to paint. I've had an issue like this in any Photoshop version I've run. It began with Photoshop CC and I've not found a solution yet. I feel like i've tried everything but purchase a new Wacom.

  • I am having trouble with updating Itunes

    Hi can anyone help me out with this. The other day I tried to update my Itunes from 11.1.3 to 11.1.4. The update wasn't successful. I then tried to update via the Itunes website however that led me to a error message. That message said "Service apple mobile device. (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services."
    Another thing that I tried was restarting my computer and that didn't help with the issue. I uninstalled Itunes and I am still getting the above error message when I am attemping to reinstall it.
    Has anyone else had this issue? If so is there anything that was done to resolve the issue? Everything with my itunes was working fine until I tried to update it.

    Hello, JRA24ever. 
    Thank you for visiting Apple Support Communities. 
    I think the best option would be to completely uninstall all components of iTunes in the order specified of the article below.  Once this is done attempt to install iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    If the issue persists, try the steps in the article below. 
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Cheers,
    Jason H. 

  • Anyone having trouble with updater 5?

    Just seems to hang after the updater 5 screen then do nothing.  server is still running under device manager.  I'm running T61 windows 7 with all updates.

    Same problem after automatic update to version 5 on a T420 using Windows 7 Ultimate x64.
    Starting, splas window appears for a few minutes and then nothing!
    Content of tvsu_exe.log:
    TSS(L) 1: 23:15:42:0517 tvsu.cpp(1825): Installdir: C:\Program Files (x86)\Lenovo\System Update
    TSS(L) 1: 23:15:42:0579 tvsu.cpp(1754): Installdir: C:\Program Files (x86)\Lenovo\System Update
    TSS(L) 1: 23:15:42:0579 tvsu.cpp(1775): szCmd: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
    TSS(L) 1: 23:15:42:0673 tvsu.cpp(579): StartTvsukernel : admin
    TSS(L) 1: 23:15:42:0673 tvsu.cpp(586): Begin InvokeUacSdkViaService
    TSS(L) 1: 23:15:42:0689 tvsu.cpp(431): Installdir: C:\Program Files (x86)\Lenovo\System Update
    TSS(L) 1: 23:15:42:0689 tvsu.cpp(466): szCmd: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
    Content of service_log.txt:
    Info 2012-09-25 , 11:15:42
    at Tvsu.Service.Client.CommandLauncher.ExecuteCommandLine(String command)
    Message: The current user is a Vista Administrator, the request will be handled by suservice -System context-
    Severe 2012-09-25 , 11:15:42
    at Tvsu.Service.Client.CommandLauncher.Main(String[] args)
    Message: Error launching command
    Exception:
    Message: Object reference not set to an instance of an object.
    Type: System.NullReferenceException
    at Tvsu.Service.Client.CommandLauncher.ExecuteCommandLine(String command)
    at Tvsu.Service.Client.CommandLauncher.Main(String[] args)

Maybe you are looking for