Still image export is not exporting interlaced images from interlaced video

I'm doing some quality tests and the video i have is 60i and i'd like to export stills from the 60i, but when i run it through quicktime conversion>export still image the resulting file has been deinterlaced. i've tried multiple formats and multiple frames, and it's always deinterlaced.
to restate, the video is interlaced and i want stills that reflect exactly how the video is and fcp is deinterlacing the still exports.

I usually export stills using the export queue, and I too have noticed that FCP6 now seems to de-interlace and resize the stills to square pixel dimensions automatically. I can't find any way to control or deactivate this option - anyone know?

Similar Messages

How can I take a still image from a video?

How can I take a still image from a video?

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do i subtract a still image from a video I have recorded

say I have a video and at one part of the video I pause it and would like to take the frame that is up on the screen and make it into a still image> how would I do that?

Your headline seems to indicate that you're trying to remove a still from a video -- while the body of your post seems to indicate that you're trying to make one!
I think what you want to do is create a Freeze Frame. If that is so, click on the little camera icon on the bottom right of the Monitor panel and select the option to insert it into your movie project.

Exporting an image from a video in final cut

Hey Everyone, I was wondering if there is a way of doing exporting a still image from a video in final cut.
Sometimes when I want to do this, I just take a printscreen of the video Full screened, but I know that's probably not the best quality.
Hope you can help me out, thanks in advance!
Rishi

videocrafter wrote:
David Bogie Chq-1 wrote:
Thanks for stepping into the conversation. Your post and the solution you offer, keep doing it till it works, implies many other issues, none of which are easily debugged from where I sit.
You need to get a life. The guy has been waiting for days for you to answer his question. You didn't bother, so I simply offered him some verification that he's not the only one that has seen the problem. If you knew how to read (maybe you should read it again) you'll see that I was not offering him a solution. Grow up David.
Message was edited by: videocrafter
It's not that I "didn't bother" to answer the poor guy, I've been making a living. Been shooting video and timelapse in Hells Canyon, on the Snake River, where my company has a series of hydroelectric plants. Fabulous weather, great scenery, and a sphincter puckering jetboat ride down and then back up two sets of Class 4 rapids. I got my priorities. I would not have traded the photography or the ride for the effort required to answer anyone's questions.
Thanks again for your contribution to the thread and your more recent character evaluation and time management suggestions. I'll keep them in mind in the same way I will try to recall Jim's Range Check admonition.
bogiesan

How to make a still image from video in iMovie 10.0.3

How do you make a still image from a video clip in iMovie 10.0.3?

See this User Tip by AppleMan1958 -
https://discussions.apple.com/docs/DOC-3231
John

Saving still images from videos

Hi, how do I save a still image from a video clip?

You can do this with a free app called MPEG Streamclip.
Detailed instructions are here at this link.
https://discussions.apple.com/docs/DOC-3231

How do i get a still image from my home movies in iMovie 09

On you tube it how's how to do this on iMovie 08, however, I cant find out how to create a still image from my home movie, and possibly export it to iPhoto,
any help much appreciated

John Codgell has some tips on how to use MPEG Streamclip to do this on this Discussion Thread:
Helpful Answer Re: can you make a still photo from clip

Can I capture a still image from a quicktime movie?

Can I capture a still image from a quicktime movie?

Yes. But how you do it depends on your version of quicktime.
If you have the pro version, you can easily use the "Export" option to output the video as a series of images.
For the basic version of quicktime, or if you want to quickly take make a still image of a single frame, you could just use the "Grab" application in OSX to take a screen shot.
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh364.html

Still Images from FCP 4

In dummies terms, how do I create still images from my FCP 4 project, save them in a file and burn them on a CD? i know I set it up in QT Conversion, take the image from VIEWER, but where does it end up once it's saved/ In the TIMELIN? Do I creat In and Out pooints? do I drag it to the TIMELINE? Looked in manual but it doesn't take me all the way. apprciate some help. thanks, Andy

In Dummies Terms:
In the upper right of this forum window there is 'Search Discussions" box.
Type in 'Export Still Images'
Hit 'Return'
Read through 500+ posts on this same topic.
Searching is good for your soul.
x

I am unable to import Raw still images from a Nikon D 80 into Premiere Pro cs 4. All jpeg images ok

I am unable to Import RAW still Images from a Nikon D 80 camera into
Premiere Pro. All jpeg images import Ok. A web search suggests I need "plug-ins" for RAW, but I can not find same. Any suggestions as to how to inport RAW files to PP CS 4 would be appreciated. I have just updated from Premiere Elements 4 which had no problem importing RAW still images.
Roygo

The way I see it (correct me if I'm wrong) but Raw is supposed to be where you have total editing control of the shot (as opposed to the camera). I believe the next step is to do the editing (i.e. color balance, exposure, etc) then make a regular image from that to use in whatever output you desire (print, web, etc.) Think of raw as the negative. Just being in raw doesn't in it self make it better.
Edit. This is from premiere help files....
Supported still‑image and sequence file formats
Adobe Premiere Pro supports 8-bit per-channel (4 bytes per pixel) and 16-bit per-channel (8 bytes per pixel) still-image files. It converts images with lower bit-depths to 8-bits per channel and images with higher bit-depths to 16-bits per channel on import. High bit-depth files are supported at one single-precision float per channel (16-bytes per pixel).
AI, EPS (Adobe Illustrator and Illustrator sequence)
BMP, DIB, RLE (Bitmap and Bitmap sequence)
EPS
GIF
ICO (Icon File) (Windows only)
JPEG and JPEG sequence (JPE, JPG, JFIF)
PICT and PICT sequence (PIC, PCT)
PNG (Portable Network Graphics)
PSD (Adobe Photoshop and Photoshop sequence)
PSQ (Adobe Premiere 6 Storyboard)
PTL, PRTL (Adobe Premiere title)
TGA, ICB, VDA, VST (Targa and Targa sequence)
TIF (TIFF and TIFF sequence)

Working with Still Images in a Video

Let's say I'd like to use a RAW still Image from my 40D Canon, which is 3888 x 2592, a 3:2 aspect ratio. I'm inserting it into a HD video, 720p, at a 16:9 ratio (1.0). I'd like to keep it large initially so I can pan or zoom in or out as desired. What's my workflow?: If I "Scale to Frame" it fits top to bottom but not laterally. If I show it in the monitor at 100%, it's much too large (but good for panning etc). How do you folks handle this, to work with the Ken Burns effects, keeping the frame aspect ratio correct, and keeping image quality good?
kdoc

That helps to a great extent: thanks Bill and everyone. A few thoughts and questions in follow up. I don't see under preferences anything about Scale to Frame Size (where is it in PrP/CS5?), but it does seem to come in by default not scaled. By right clicking the clip on the timeline on a PC I get the option to check or uncheck that possibility.
I also don't see Effects/Motion/Scale: where is that?
If I want to show my entire photo, as I originally worked it in Photoshop, I guess I need to then check Scale to Frame Size. And of course it doesn't fill the 16:9 aspect ratio laterally, even in landscape orientation, certainly not in portrait orientation. Do you leave it as is, with black margins, and/or do you crop to 16:9 in Photoshop before bringing it in the PrP to eliminate the black margins? (Bill has addressed this in his previous post). I'm gathering that if you don't want any black to show, a 3:2 DSLR Image within on a High Def (say 1280x720) video requires cropping. Do you folks crop in PS when resizing--you can't batch that. I see that Bill sometimes puts a new background behind, to eliminate the black margins.
Where in PS do you set pixel aspect ratio: I can't find it, though I only looked in PSx64, and not in PS x32? Actually I don't think one needs to answer this in PrP CS5: the image seems to come into PrP with the correct aspect ratio--for my Canon 40D RAW images it comes in at 3888x2592 (1.0) if I'm editing for a 1280x720 HD DSLR. I can convert my image to a PSD file in PS as Bill suggests (TIFF will work too).
I'm thinking that the new CS5 with Mercury Playback and 64 bits may handle these larger RAW images fine--but time will tell.
I don't quite get what Scale to Frame Size does (it seems to keep the height at full frame, and the frame aspect ratio constrained). or (in the dropdown) Fit vs. 50% or 100% does? Is it changing the actual image dimensions or just those which show up on screen? For example, I made an image in PS exactly 1280 x720 and brought it into a PrP video project which was also 1280x720, but the image overlapped at 100%. It fit the frame perfectly at "Fit" (from the dropdown).???
Remember that in PS, you can handle both portrait and landscape images for resizing with File--Automate--Fit Image. Just use the largest of the two pixel dimensions for both height and width. Or use Image Processor.
Thanks all
kdoc

Dragging a large still image from the browser into the viewer crashes FCP

Okay, I've not seen this problem until just a couple days ago but was wondering if it was just me or if everyone has this problem? I've found a work-around, but let me explain the problem first.
I'm creating a growing up photo montage. I scanned all of the pictures myself at 300 dpi (as I've always done in the past) and saved them as TIF files. Some pictures as relatively small, i.e. 3.5 mb is size and do just fine, but it appears anytime I drop a picture into the viewer in preparation for the the timeline, it will crash FCP if the image file is any larger than about 5 or 5.5 MB. Now I know there is a limit on the resolution of a still and it shouldn't be any larger than 4000 pixels in either direction, but that is not my problem, the problem appears to occur with large files. I've used large still files before in past projects without any problem, so this is why I'm stumped. I've went as far as trashing my preferences, but that didn't change anything. I've even tested a still image from a past project that was something around 9 MB (or was it 19 mb?) in any case, it also crashed FCP but... I've used that picture before in past projects without any problem. I even created a new test project just in case my project file itself had a problem.
My work-around is to simply drop the still image from the browser directly into the timeline, thus bypassing the viewer. This works every time without a hitch. I can even double-click on the still now setting in the timeline to load it into the viewer so I can add effects or keyframes or whatever without any problems (thank goodness). So, has anyone else experienced this problem or is it just me?

Is this image saved in a colorspace mode that is anything other than RGB?
CMYK & Grayscale images will cause problems.
Some light reading regarding your choice of 300 dpi: http://www.scantips.com/no72dpi.html
Unless you plan on panning and zooming your images, the best procedure is to use one of the video preset templates in Photoshop and paste your content into it. Scale and position using the Transform controls. For best results save as a TIFF without compression. Don't forget, always in RGB colorspace.

DVCPRO HD 720P: pixel aspect ratios with still images from Final Cut

I am currently trying to get still images from a trailer I am working on with Final cut pro. The footage is DVCPRO HD 720P 24pn and the interlacing and pixel aspect ratios have been giving me a lot of trouble in photoshop. I am able to convert the PAR but it is for preview purposes only...? I need the file to be saved with the converted PAR. How do you do that???
Also, the de-interlacing filter on photoshop doesn't seem to help the quality of the photo.
Anyone have any ideas?
I have searched and searched and only found somewhat related questions, so maybe I am the only one trying to do this...

Why are you doing interlace if you have 720p?

I have read some forums but cannot obtain a still image from iMovie. How do I do this in iMOvie 11 9.04.

Hi
Can anyone tell me how to obtain a still image from iMovie 11 version 9.04. I have read some forums but cannot find the solution. I have also read the Apple help pages but the instruction does not fit the options available. I need to get a few stills from a movie to add the stills to the website. PLease any help?

Thank you Neil,I have a macbook pro with snow leopard v.10.6.8.included intell core 2 duo with a processor speed 2.5ghb with one processor and cores 2.
can i download onto my laptop an update by internet to my imovie 8.0.6 directly or as i have read, the system will not let me do that unless i have imovie 9.0.0 already which i do not have.
Perhaps i misunderstand you. Do you mean purchase a software copy from an apple Store and the can i directly upgrade.

Create still images from video files?

from http://gadgetwise.blogs.nytimes.com/2009/04/16/5-new-photoshop-tips-for-photographers/ , "You can now preview video in Bridge and create still images from video files."
I just installed the 5.4 Camera Raw Update.
I can preview the AVI files from my Nikon D5000, but have not figured out how I might create a still image ( other than stopping the movie, and dragging to copy ) Have tried searching adobe, this forum, have not found more info ion this.

Stop the video at the desired point, press the Shift, Command, and 4 keys, drag the cursor so that the whole picture is highlighted, let go of the button, and open the PNG on the desktop.
(35300)

Still image export is not exporting interlaced images from interlaced video

Similar Messages

Maybe you are looking for