Still images appear black in final DVD

I am making a 12 minute film on a Dell dimension 2400 using elements 2 (which I have done several times before without problems).
Project includes video and still photos.
Some of the photos appear black in the timeline and some appear black on the DVD.
What might be causing this? Thanks

Hi Alkynance,
Lots of free tutorials on Premiere Elements and excerpts from the Premiere Elements 2 In A Snap book at http://muvipix.com
Lots of the folks here are members there also. If you need any additional help, especially in the inspiration department, stop by for a visit. We have a free gallery where the members can post videos and photos, lots of free stuff like graphics, DVD Templates and Motion Backgrounds, Chat Rooms and a whole lot more :)

Similar Messages

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Attached is screen shot. What happens is I go to File/Automate/Merge to HDR Pro, then select my 3 images, which are flattened psd files (I have tried tifs and jogs too), hit OK, it processes them, but instead of the image appearing, I get this black image. You can see my original images at bottom... jpegs too),

Still images appear shaky.

Hi, I'm trying to burn a video I made in Final Cut to DVD, and when I watch the quicktime version of the video, everything is fine, but whenever I put it to dvd, these two stills come out shaky. What I did in Final Cut was freeze frame a shot when I wanted to transition. It looks great output from Final Cut, but whenever I burn it through iDVD, just the two still images are very shaky. What am I doing wrong? I am not sure how to adjust the burn speed if maybe that is the problem. It's just a regular 4:3, and I have tried both best quality, and best performance outputs. Any ideas? Thanks!

Hi Joseph
My bet is - this is due to interlaceing.
I would make new freeze frames - but +/- 1 frame from Your selected one.
I have connected my Camera via FW to Mac and to analog out a TV-set.
Now I can judge the result better and I think I can track those vibrating
freeze frames better by looking at the TV.
You could try to save out the freeze frames and use JES Deinterlacer and see
if this might remove every second line and replace them with the odd no.
=> Stop flickering.
Other flickerings originate in photos with very thin lines - to solve this I open
the photo in PhotoShop and apply Gausian Blurr => slightly unsharp but
a much more enjoyable picture on TV.
Yours Bengt W

When rendered, still images appear in low quality

Hello everyone.
I'm facing an interesting dilemna with Adobe Premiere Elements 8. It usually works fine for me, and with time I have learned to fix most of the details that usually bother unexperienced users such as me.
What happens is that I'm importing still images (JPEG) to my video, and when rendered they're final quality appears to be so low. I mean, you can see the pixels very large, square-like, you know... as if I had a small image and had it stretched out a lot, but that was not the case at all.
I never had this problem before, and I can't recall anything different on my part in this new video.
Any ideas as to how to fix this?
Thanks everyone.

Hi everybody,
It is a bit late to join this discussion but for vacation reasons I didn't follow the PE-Forum for a while.
I think I have a comparable problem like fmrees: Since a couple of days the resolution of the Preview in PE8 is rather poor. Unfortunately I can't say exactly when it startet. Maybe it begun after I rendered the project.
After having read this issue I deleted the rendered files, looked at the preview: still the same. Re-rendering didn't improve the result.
The difference between the problem of fmrees and mine is: I do not use at all still images. The only video sources are AVI-Files from MiniDV.
I looked at other PE-projects I didn't touch for several week: I have the same problem! So probably it is something in the PE- or project-settings, but I have no idea what it could be (I am rather a newbee in PE).
My Hard-/Software:
Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz 2.80 Hz
RAM 8.00 GB
OS
Windows 7 Home Premium
Video:
NVIDIA GeForce GTX 260
Philips 244E
Audio:
AVerMedia H789 PCI-E DVB-T
Realtek High Definition Audio
Premiere Elements V8.0

Still Images Appear Pixelated When put into iMovie

I've been working on iMovie 9, and have just downloaded the new iMovie 10 (I think that's the newest one!) anyway, when working on the previous iMovie any still images I uploaded from iPhoto appeared in my projects just fine, even when I was adding the Ken Burns effect etc. I have just imported this project into the new iMovie and now all of my still photos appear crystal clear for a second and then become horrifically pixelated.
I am completely new to this and need to get this sorted as it's for a university project and I just can't get past these horrible pixely images, when they were fine on the previous iMovie! Any help would be greatly appreciated.

This should only be a temporary effect. Once the clips have been converted in to ProRes (a background process) they will be OK. If you do more editing the affected clips will again appear blurred until they are reprocessed.
(In iMovie 9 you had to wait for the clips to be transcoded when you imported them, before you could do any editing. In iMovie 10 you don't have to wait but the transcoding is done in the background.)
Geoff.

Still images rendering black

I have been trying to import a still image with ken burns effect. It is coming into the program and then rendering and going black with no photo. I have tried Jpeg, Tiff what can I do????

*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. *com.apple.iMovie.plist *
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
iMovie updated ?
QuickTime updated ?
Mac OS version ?
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

Can not make still image using share in Final Cut Pro x

This is what I get when trying to make a still image under share.
(com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
This is a new error message. Was able to make still image before.
Thanks for anny help in solving this problem.
Russ Andris

Hi again Russ,
just posted this over at Compressor because of the Compressor related error message I was getting wheN i tried to 'Share' a sill image from video.
Thanks for the tip Russ, I did not know that one. I had tried using cmd+shift+3 with Snapz Pro to screen capture which intially worked but then did not. I tried ditching the prefs and the apps with Digital Rebellion but had no luck in saving a still. But, I installed the new FCPX update and on first try I was able to export a stll frame, on one laptop anyway. BTW, must say, I am not keen on the 'Share' notion in an app like FCPX. What I considering I am doing when trying to obtain a stil image is exporting or saving not sharing. I hope Apple might considered amending such terminology, share seems appropriate for iTunes or iWeb but not FCPX.
One more thing, a truly odd one. Files marled as .mov from my Fujifilm X100 will not import into FCPX!!
That is truly amazing - Quicktime files not recognised by an Apple aplication!! Our trials are not over.
D

Large images appear black

Large images may appear as black blocks. I've used 9GAG as an example because it happens quite often on 9GAG (so it was easy to find an example), but it happens on some other websites too. The images are displayed correctly in other browsers.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

When opened, my image appears black with a few red lines at the top, yet the thumbnail looks as it should be. How do I fix this?

I have been working on an illustration in Photoshop for a few months now. When I tried to open it yesterday it came up as a single layered black image with a few red lines at the top. I have no idea what this is. I have not even used red in my artwork. However, no matter how many times open this file, the thumbnail still looks like my artwork, as it should be. How do I fix this? Will I be able to get my artwork back? Please help! Thank you in advance.

Make sure you has the latest Windows Device driver for your display adapted from its manufacturer's web site installed on your system. Perhaps you updated the device driver with a Microsoft Windows Update. Microsoft update does not always install the correct update needed fpr Phoroshop.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

CMYK images appear black in Preview 4.2

Hello.
When opening CMYK images in Preview or in Safari, they appear as black and unreadable!
Is there a way to fix this problem?
Thanks.

Is this any help?
http://docs.info.apple.com/article.html?path=Preview/3.0.1/en/pv1013.html

Why do my images appear black when I insert them into documents?, Why do my images appear black when I insert them into documents?

For the last few months when I try to insert images into word, powerpoint etc and also PDF's they appear as black.
My suppliers have also noted that this happens when I send images to them for artwork etc.
Any clues please?
Thanks!

At a guess? Because they're the wrong colour profile. But who knows, with that amount of info to work with it might also be the wind direction
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
Regards
TD

Still Images Going Black

I am working in Pro CS3. It's a HP 1.8 with 2 gig of RAM. I keep importing still pictures in different projects (different pictures in different projects). They keep coming up black. They do recover or if you click on them enough they do come back that way. Is it a RAM issue or settings. I can't seem to find the solution.
Thanks,
Steve

As well as size, I have read that pictures created by a device that puts "extra" information in the file header won't work well... solution is the same as Jim gave, open in a known good photo editor and resave so the extra header information is stripped away

Still image with button selection

I'm a newbie with DVD Studio Pro so pardon me if this is a stupid question. I've created my own menu background in Photoshop for a standard menu. This is a chapter index menu. My buttons highlight and function correctly, playing the proper assets. However, in addition to selecting a button and seeing it highlight, I'd also like to have a still image appear in one quadrant of the screen. Each button would trigger a different still image to appear in that quadrant (the stills are taken from the assets relative to each button).
I've tried bringing the stills in as shapes and putting them in a drop zone in that quadrant (which looks great) but can't figure out how to get the buttons to trigger each image. Is this even possible? Am I trying to do something in a standard menu that can only be done in a layered menu? My understanding is that you can't have music with a layered menu (I do have music) so I'd like to do this in a standard menu.
Thanks for any help,
Dan

Basically layer menus would do this, but they do have issues with compatibility (really it is a series of menus wheen it is done)
But to trigger sections like you described, no real way of doing that. You can play with overlapping buttons (NOT A GOOD IDEA) and color mapping, but to get what you want, really no good way without series of menus or perhaps using a track as a menu with subtitles/images, and even then iffy how it will work on some machines

Reverting layer of still images sent to Motion back to still images

Hi, I drag selected a series of still images on a layer in FCP then sent that selection/layer to Motion for editing. How can I revert the layer back to the still images?
Or, alternatively...
The problem is these still images appear squarish in FCP's Canvas and in Motion...they are rectangular 16:9 images in their native format...so I am considering dragging each individual image back onto the Canvas and then dropping them onto the Canvas's "replace" overlay -- to hopefully update the images in their original dimensions.
I'm unsure of why these images are no longer 16:9...perhaps there is a more efficient way to restore their original dimension. There are about 50 of them...I am unsure of what I have done to make them squarish.
Thanks (new to FCP)

opened old version, cut and pasted, reconnected then replaced

Still images on TV

I edited a video with parts where there were still image taken from video clips. When compressed and played on TV, The pixels of the still images appear to go crazy. Can it be fixed?

Yes, you need to make sure you are using only one field as opposed to a frame. What you're likely seeing the flicker of one of the fields. I don't have FCP open right now, but I'm sure someone will help.
Give me a sec and I'll open FCP and look.

Still images appear black in final DVD

Similar Messages

Maybe you are looking for