Still installing software update after12hours and cannot reboot?

New i mac. Installing software update for 12 hours. Cannot turn off or reboot or do anything.

Hold down the power button on the back until it shuts down. Repeat and let it start up. Then, try the update.

Similar Messages

After Software update yesterday, ibook cannot reboot & stay in blue screen.

After yesterday software update, My ibook restart and got stuck in the blue screen with the spinning spiral icon in the middle of the screen.
I try to reset the pram and PMU but in vain.
I also use CRTL-V while rebooting and found the repeating last few lines which the command prompt shown was as follow:
localhost/system/library/coreservices/loginwindow.app/contents/MacOs/loginwindow s:Login Window Application Started
Anyone can assist, thanks in advance.

I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html

Just installed software updates and now can't log onto Safari because of some TelevisionFanaticsToolbar plugin. Help?

I just installed software updates to my computer and after restarting cannot access Safara. The message says because of a TelevisionFantaticsToolbar plugins. Cannot find on my computer. How do I delete this and regain access to Safari?

Save and/or quit your applications & documents Go to Applications>Utilities Folder Click Disk Utility Click the Volumne (HD) that you want to check. Click the Repair Disk Permissions button. (Don't worry about verifying) At the bottom of window when the repairs have finished, you will see the “most important thing”: Permission Repairs Complete The privileges have been repaired or completed on the selected volumne.
Restart your computer to confirm repairs.
http://docs.info.apple.com/article.html?artnum=106214 http://docs.info.apple.com/article.html?artnum=25751
http://docs.info.apple.com/article.html?artnum=25751

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

I was trying to update. Now I have a screen "Installing Software Update" and it's stuck

Trying to update. The screen has been stuck on "Installing: Software Update" and I can't exit or do anytihng.

http://support.apple.com/kb/HT1808

The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.

The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.

Really?
Is there no other option? No magic key combo that brings up a secret menu?
My imac just froze during a software update install and I too do not know what to do.

I installed latest software updates today and now iphoto won't work at all - heeelllppp!

Hello
i installed latest software updates today and since then iphoto will not work at all. The window oens but it remains blank, and when I go to force quit it says iphoto not responding, so it's as if it's crashing on startup. I can't access my photo library or put new photos in the library from my camera, in fact I can't do anything at all with it.
I am in Africa a long way from home and tech support, so please can anyone help me?? Im a bit desperate as my whole photo library is inaccessible, and it will be months before I am back in the UK.
I am not hugeley techie so plain English please.
Thanks

Hardware Information:
          MacBook Pro (15-inch Core 2 Duo)
          MacBook Pro - model: MacBookPro2,2
          1 2.16 GHz Intel Core 2 Duo CPU: 2 cores
          3 GB RAM
Video Information:
          ATY,RadeonX1600 - VRAM: 128 MB
Startup Items:
          AdobeVersionCue: Path: /Library/StartupItems/AdobeVersionCue
          ADSLAutoConfig: Path: /Library/StartupItems/ADSLAutoConfig
          HWNetMgr: Path: /Library/StartupItems/HWNetMgr
          HWPortDetect: Path: /Library/StartupItems/HWPortDetect
          StartOuc: Path: /Library/StartupItems/StartOuc
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:49:42
Disk Information:
          Hitachi HTS541612J9SA00 disk0 : (111.79 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
                    Macintosh HD (disk0s2) /: 111.47 GB (6.45 GB free)
USB Information:
          JMicron USB to ATA/ATAPI bridge 111.79 GB
                    (null) (disk1s1) <not mounted>: 32 KB
                    Backup (disk1s3) <not mounted>: 111.67 GB
          Vodafone (Huawei) Vodafone Mobile Broadband (Huawei)
          Micron Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.rim.driver.BlackBerryUSBDriverInt          (0.0.67)
          com.huawei.driver.cdc_usb_bus          (1.0.2)
          com.huawei.driver.cdc_acm          (2.6.2f17)
          com.huawei.driver.dc_net          (1.0.2)
          com.huawei.driver.cdc_ncm          (2.6.2f16)
          de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
Problem System Launch Daemons:
          [loaded] de.novamedia.nmnetmgrd.plist
          [not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
          [failed] com.apple.Kerberos.renew.plist
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.versioncueCS3.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.trusteer.rooks.rooksd.plist
          [failed] xxx.qnation.PeerGuardian.kextload.plist
Launch Agents:
          [loaded] com.adobe.CS4ServiceManager.plist
          [loaded] com.trusteer.rapport.rapportd.plist
          [loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [failed] com.facebook.videochat.[redacted].plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          MTN Pocket Internet
          Microsoft AU Daemon
          Vodafone Mobile Broadband
          Vodafone Mobile Broadband
3rd Party Preference Panes:
          Adobe Version Cue CS3
          BDSPrefPane
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          Trusteer Endpoint Protection
Internet Plug-ins::
          Flip4Mac WMV Plugin: Version: 2.3.2.6
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
          JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
          Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
          AdobePDFViewer: Version: 9.5.5
          QuickTime Plugin: Version: 7.6.6
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          Google Earth Web Plug-in: Version: 7.1
          RealPlayer Plugin: Version: (null)
          Silverlight: Version: 4.0.50524.0
          iPhotoPhotocast: Version: 7.0
Bad Fonts:
          None
Old applications:
          None
Time Machine:
          Information not available
Top Processes by CPU:
              32%          firefox
              25%          Vodafone Mobile Broadband
               3%          EtreCheck
               2%          WindowServer
               1%          ps
Top Processes by Memory:
          289 MB          firefox
          86 MB          mds
          55 MB          Mail
          52 MB          WindowServer
          52 MB          Finder
Virtual Memory Statistics:
          1.44 GB          Free RAM
          846 MB          Active RAM
          427 MB          Inactive RAM
          324 MB          Wired RAM
          383 MB          Page-ins
          0 B          Page-outs

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

No. You must connect your iPad to a computer (it does not have to be yours) in order to restore it to factory settings.
Once you're home, you can restore it from a backup.
Any content that you did not backup has been lost.
~Lyssa

HT1222 i completed a software update yesterday and whenever I try and launch iTunes now it crashes almost immediately. I have tried downloading an installing the latest version but to no avail - any ideas?

i completed a software update yesterday and whenever I try and launch iTunes now it crashes almost immediately. I have tried downloading an installing the latest version but to no avail - any ideas?

Have you tried temporarily turning off your firewall and antivirus software until the download has completed ?

Install Software Updates Step fails during Build and Capture

I have run into a problem while attempting to use the Install Software Update task during a build and capture task sequence. I have MDT 2012U1 integrated into SCCM 2012.
The Install Software steps find and use the Deployment Points fine and the Use Toolkit steps similarly are able to download their source files from the distribution points using the Network Access account. The Install Software Updates step, however
fails with an access denied error in the CAS.log.
I have found that I can work around this problem by setting the DP to allow anonymous access. After checking this box, the software updates install during the build and capture task sequence. Unchecking the Allow anoymous makes the problem recur.
I would like to not have to have the "allow anonymous access" enabled on the DPs for obvious reasons. Other packages download correctly from the DP with anonymous access disabled - they use the network access account. Install Software Updates
is the only step that seems unable to use that account to talk with the DP.
Is this a known issue? Is there a work around?

Thanks for the information. I will give that a try. I do have the SMSMP & SMSSLP (not sure I need this one in 2012) filled in in the Configmgr client install settings. Before I did that, it couldn't even find the SUP.
I am a little skeptical that the hotfix will fix my problem since most packages are downloading from the DP fine - it is only Software Updates that are failing to download. On the other hand, it is clearly a permissions issue since allowing anonymous
on the DP resolves the issue, all be it in a way I am uncomfortable maintaining in the long run.
That KB replaces a lot of key Windows system files. Hopefully, it won't cause more problems than it solves.
---additional thought
I wonder, could it be that Packages that work without this KB have package share settings with "Copy the content in this package to a packages share on Distribution Points" cleared/unchecked? This setting is not available for patch packages
- so I wonder if it is enabled by default behind the scenes. That could explain why the patch packages are affected and not the other regular application packages I have are not. All my regular packages so far do not have the
"Copy the content" box checked. Clients would be accessing the packages differently I suppose based on whether it was through a packages share or through the new SCCM 2012 package storage thing with the hashing.

HT4061 i have cellular data internet connectivity (no wi-fi) but can't download and install software updates

i have cellualr data internet connectivity (no wi-fi) but can't download and install software updates. how can i update the software?

i have cellualr data internet connectivity (no wi-fi) but can't download and install software updates. how can i update the software?

HT1444 My system is frozen on installing software update. The blue line has not moved for 6 hours. Is there a way to disconnect and restart my Mac?

Can anyone give me a suggestion how to restart my system if possible or stop the installing software update that has been idle for over 6 hours?

Press and hold the power button for 10 seconds.

Installing software is happen and reboot nearly one day after system recovery.

HP installing software is happen and reboot nearly one day after system recovery.
I have done the recovery for my lap
1)After recovery done system get reboot and hp software installation menu has came.
2)HP software get installed , and then rebooot.
3)This HP software installation menu is come and reboot the pc and again it come. it doesn't finish
this is running more than 24 hrs.
4)please guide to resolve the issue.
System Model: HP Pavilion dv5 Notebook PC
Operating system: Windows Vista Home Premium
Please use the link to download the video of my problem, which used understand the issue:
https://www.dropbox.com/s/bf7e08lmdrn32t1/HPSoftwareInstall-1.rar
https://www.dropbox.com/s/4k4rug8pvs3w6qu/HPSoftwareInstall-2.rar

Satellite C75D-A7370
ordered recovery media from Toshiba and installed it. .... I tried to call Toshiba support, but because I am outside my warranty, I was told I would be charged for support.
It is running Windows 8..even though it is supposed to be on 8.1 (according to the sticker on the bottom of the laptop).
The product key is buried in the hardware.
According to the spec above, the original model shipped with Windows 8 and needed to be upgraded. My guess is that they later shipped the same model with Windows 8.1.
It appears Toshiba shipped the wrong recovery media.
Explain that when you call.

Applying all update\patches during 'install software update' step

Hi,
I have created software update group (around 10 updates\patches) and deploy it to 'unknown computers' collection. Ts 'Install software update' step scans through and only installs 2 updates out of 10. I have kept deploy property as 'required' while publishing
on 'unknown computers' and 'install software update' has 'All Software update' selected (other option is mandatory update'). I want to have all the 10 required update to be installed . any idea what should be the settings on 'deploy' prperty for software group
that install all the updates in the group during 'install software update' step? Any pointers will be appreciated
Regards,

Hi,
Yes , they need a reboot and reboot is happening automatically. I believe, once reboot is done, other patches should take over with installation. I don't see any information for another updates that are part of same software group. For these 2 succefully
installed updates log has below that indicates they reboot and finish.
WUHandler has log:
1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB2862330) (35dcb297-873a-45af-bb19-e8b18aedd5bb, 202) WUAHandler 2/5/2014 8:09:02 AM 2760 (0x0AC8)
2. Update (Missing): Update for Windows 7 for x64-based Systems (KB2834140) (88152097-0294-4098-b27c-d2fd479e9831, 202) WUAHandler 2/5/2014 8:09:03 AM 2760 (0x0AC8)
Update 1 (35dcb297-873a-45af-bb19-e8b18aedd5bb) finished installing (0x00000000), Reboot Required? Yes WUAHandler 2/5/2014 8:09:06 AM 2348 (0x092C)
Update 2 (88152097-0294-4098-b27c-d2fd479e9831) finished installing (0x00000000), Reboot Required? Yes WUAHandler 2/5/2014 8:09:09 AM 356 (0x0164)
Update (35dcb297-873a-45af-bb19-e8b18aedd5bb) has finished the post reboot operation. HResult: 0x00000000. WUAHandler 2/5/2014 8:10:46 AM 2152 (0x0868)
Update (88152097-0294-4098-b27c-d2fd479e9831) has finished the post reboot operation. HResult: 0x00000000. WUAHandler 2/5/2014 8:10:46 AM 2152 (0x0868)
Any pointers to figure out the status of other patches\updats that are part of same group?
Regards,

Installed software it response and feeds but prints nothing

installed software it response and feeds but prints nothing

Which updates were done?
Have you checked and made sure your permissions are correct? This is done with Disk Utility, which is found in the Utility folder in Applications. At the same time Verify the drive, as an added measure.
Also try deleting the following preference file com.apple.systempreferences.plist
It will be replaced by the system when necessary.
If it still is not correct, I would down load the 10.4.11 combo update, repair permissions again, then install the combo update.

Still installing software update after12hours and cannot reboot?

Similar Messages

Maybe you are looking for