Still looking for flex help

I had a couple of responses to my request for help that were excellent. Unfortunately, I have lost all my emails and cannot find the email of the people who responded. Could you please respond again at [email protected] I am still looking for some help.
thank you

I've provided this type of basic support to others at $50 per hour. I bill in 15 minute increments, so for quick questions you would typically pay
$12.50 per question, $50 / hour for more involved issues.
One thing, I'm more of a front-end guy, so while I can help with HTTPService connecting to PHP scripts, I'm not up to speed on ColdFusion,
Java, etc.
I have a day job, so I would have to respond outside the hours of 9 - 5 pacific standard time.
I have emailed you about this, so please reply to that email on this topic.

Similar Messages

  • My printer is a Samsung ML-2010R.  Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro.  Previously, I was running Mac Os X version 10.5.8 through this printer  on a 4 yr old Macbook. Any further help is most appreciated:-)

    My printer is a Samsung ML-2010R.  Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro.  Previously, I was running Mac Os X version 10.5.8 through this printer  on a 4 yr old Macbook. Any further help is most appreciated:-)  Humbly, bowiej

    Apple seems to be naming their operating sytems usability based on the respective turd size of the feline in question. Lions are big, very, very, very big.
    I had a system that served me well for 2 years until I mistaking bought a new machine which runs mega-turd (Lion). Foolish me, now nothing works properly, its a daily struggle to get anything working smoothly using my NEW mac mini. All my other machines work fine, even the windows machines and my Android tablet see all the network components and can talk to each other.
    My Internet service is over 3g which I share to the house using internet sharing via my brand new €800 mac mini running POS Lion, everytime the service is interrupted, Kaboom, the mini resets the DHCP server, but doesn't seem to refresh any of the components so connections drop everywhere.
    Its amateur hour at Apple folks.
    There are several posts alone relating to internet sharing, I have submitted a bug report relating to the non user controllable DHCP server (which may be at fault), but the response / solution from Apple was lacklustre and ultimately didn't work.
    See this, there are some work around's in there;
    https://discussions.apple.com/thread/3771614?start=0&tstart=0

  • Switched from NAS to external harddrive but Itunes is still looking for NAS

    I used to have a NAS (Net attached storage) and i switched to a Seagate 1TB external harddrive, I copied the whole Itunes library, program etc...and it runs but it is 7.6 version so it would not identify my ipod until i updated the software, so i go to update, download the update and go to do the update and I get a error message that it cant locate //nas/disk1 the old destination...I went so far as to delete itunes and Quicktime and redownload itunes 8.1 so i go to install it and it is still looking for //nas/disk1 now i have a folder with 375gb of music and movies and no program to run it.... I try to go into control panel add/delete programs and itunes is still in there so i go to delete and I get a error message that it cant delete it because it cant find //nas/disk1...*** I need help Please someone tell me what i have to do to I was able to delete quicktime but it still shows itunes and it will not let me install itunes...i did a search through the computer and ther are no files for itunes so i do not know why it is still trying to locate it from there....HELP

    Hi,
    The reason that you are getting the ! is because iTunes is still looking for the music on your external hard drive.
    You need to create a new library iTunes: How to open an alternate iTunes Library file or create a new one
    Now turn on iTunes Match and select add this computer. You will now see all your music in the cloud. When you want to add new music, revert to the original library on your external hard drive.
    Jim

  • I bought movies from iTunes but decided to download later as I was still looking for another one.  Now I can't find anyway to download them.  Anybody had the same problem?

    I bought movies from ITunes but decided to download later as I was still looking for another one.  Now I can't find a way to download them.  Anybody have the same problem?  Help, please.

    Hello William
    Check to make sure that in iTunes Preferences that Show iTunes in the Cloud purchases is check or check in the iTunes Store under Purchased to see if it rests there.  If you still cannot locate them, the report the issue to the iTunes Store.
    Download past purchases
    http://support.apple.com/kb/ht2519
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • Still looking for asd2.5.8

    Thanks to all that helped don't know if I burned it right but the software everybody gave me still won't work and need help I will be home tomorrow If someone would like to call me and maybe talk me through it that would be fine I can give u my number but am still looking for the software

    Right you are, was thinking of AHT I guess!
    Here's the full list...
    .DS_Store
    .Trashes
    Apps
    ASD OS 2.5.8GMc1.dmg
    ASD Read Me v2.5.8.pdf
    ASD Test Results Guide for G4 and G5 Computers.pdf
    ASD User Guide.pdf
    Burning ASD to disc.pdf
    Desktop DB
    Desktop DF
    diags
    Includes
    main.sc
    OF System Folder
    TCMs
    TestApps
    Thermal Calibration Results Guide for G5 Power Mac Computers.pdf

  • Why tomcat is still looking for old jar files?

    Please help me it is a very serious problem.
    I updated one of the jar files used by the project. I am using a new method that is available only in the new library. I removed the old jar files in my local system, and everything worked fine. Then I commit those files to the subversion, which is in the testing server, and then I created the war file. The war is successfully created, then I deployed to the tomcat. But, now there is an error in the portion I am using the method that is only available in the new jar files.
    One of the error when I go to that portion is:
    1. No Such Method Exists
    The other errors on log files are:
    1.
    WARNING: Failed to open JAR
    java.util.zip.ZipException: No such file or directory
    2.
    validateJarFile(tomcat/webapps/ROOT/WEB-INF/lib/j2ee.jar) - jar not loaded. See Servlet Spe
    c 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
    Please help me, I have tried every other way to solve this. I have tried removing all the old jar files there were, and replacing with the new one. I have tried creating a war file and ftping to the testing server.
    I problem is still there and it is because the testing server's tomcat is still looking for old jar files. I used Netbeans and add jar files as usual method.

    Check the contents of your WAR file that you are deploying on the testing server to see if it contains the JAR that you can't find.
    More than likely you are building your WAR file and your new JAR file is not being included in the build.

  • Looking for Flex devs for a non-profit project

    Hello,
    I'm looking for Flex developers [both knowing Flex or wanting
    to learn it] willing to work on a non-profit project within
    www.supcom-live.com.
    The project is very interesting, long-term and will be
    rewarding in the future.
    We are using PHP, Typo3 and vBulletin therefore those skills
    are desired, but there is nothing one can't be learnt. Java
    programming is possible but we would need to build an API.
    Please contact me for more information.

    Hi,
    Are you still looking for Java programmers? Can we participate in your work offline? I am in France now. Tell me what exactly you need? I am 5yers experienced in Java technlogy.
    Reply back to [email protected]
    Regards,
    Murthy

  • I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

    I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
    Currently use a Mac with the latest Mavericks 10.9.4

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • TS2776 I cannot get my IPhone to recognize my new computer; it's still looking for the old one.

    My IPhone won't sync with a new windows 8 computer.  It's still looking for the old one.  How in the he11 do you change the name of the PC the IPhone looks for?

    This user tip should be useful
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Looking for some help in creating an ItemFilter for a Targeter

    Looking for some help in creating an ItemFilter for a Targeter
    Need a examples for creating itemfilter and TargeterFirst

    Hi David,
    We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
    extension before, I think you could consider getting help from
    syncfusion forum, more syncfusion experts can help you on this issue.
    Thanks for your understanding.
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT2731 Hello my I tune account name is edited . I've changed my billing information and I think the I tune is still looking for my old billing info, which is not active anymore.

    Hello after changing my billing information my account is still not working. I think the sistem is still looking for my old billing info. and that info is not working anymore. will you please check it and advise.

    Welcome to the Apple community.
    I have asked for your email address to be edited out. Post your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.
    If you have already changed your account information with Apple at my Apple ID, in order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

  • Still looking for examples

    Hi
    I have heep of books on Java security, but am still looking for examples that show how to Create, Import and Export certificates PROGRAMMATICALLY.
    Does anyone know where I can find these.
    regards

    I can create certificates using Keytool, but I was wondering how to create certificates using java API

  • Moved files to 'F-drive', but iTunes playlists still looking for 'D-drive'

    I've just reconfigured my hard drives and moved my iTunes folder to my F-drive. All of my playlists are still looking for teh old D-drive.
    Is teher a way of modifying the playlist files?
    Thanks,
    Steven Lyall

    I've had this problem too. Only way I know is either use smart play lists or rebuild your play lists from scratch
    If anybody else has a solution or a program that can resolve this it would be great.

  • HT1386 I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi.  How do I change the WiFi computer associated to my iPhone?

    I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi.  How do I change the WiFi computer associated to my iPhone?

    Hi Terri571,
    Welcome to Apple Support Communities.
    See these steps for setting up Wi-Fi syncing between your iPhone and new computer:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    Wi-Fi syncing
    Open iTunes
    To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
    In the Summary tab, select "Sync with this [device] over Wi-Fi".
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
    The iOS device is plugged in to power
    iTunes is open on the computer
    The iOS device and the computer are on the same Wi-Fi network
    While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
    Click Apply or Sync to sync the iOS device.
    If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
    Best,
    Jeremy

Maybe you are looking for

  • I can no longer use my remote to access my music

    I use my remote to choose my songs on iTunes, but out of the blue yesterday it no longer works. It brings up all of my playlists but when I select one there is no music there. When I go to choose a song, album, or artist, the screen says either "Erro

  • How do i restore data after hard drive replacement

    I recently had to have my HD replaced (failed after nearly six years). the data was recovered and is sitting on my desktop in a folder. How do I restore that data (login, passwords, photos,etc) so it is the default login on my mac?

  • Group by making difference in result when only when ID is selected.

    The following query returns nothing since there is no data matching criteria in tables which looks good to me: SELECT SUM (ci.premium_amt),'START PROGRAM' FROM hr.group cg, hr.request pi, hr.rate ri, hr.info cc, hr.allocation ci, hr.index fi WHERE cg

  • ./crsctl check status error...

    Hi, i have installed 10gR2 CRS(10.2.0.1).i am getting following error when issue the command root@rac1$./olsnodes -n rac1 1 rac2 2 root@rac1$./crsctl start crs Attempting to start CRS stack The CRS stack will be started shortly root@rac1$./crsctl che

  • Calling ALV Block List twice

    Hi all, I am calling ALV block list twice. In I block list user selects any record and then clicks on a button and then control goes to II block list. My problem is that when i come back from II to I list, and select any new record, the selected valu