Still msg tone Error exists in ios 5.1.1

i have noticed aftr more thn around 8 to 10 days of extensive use, the msg tone gets kinda repeat itself in a line thrice for just one message.. thn the only thing which helps is a restart.. hav anybody knows about this error ??? "fyi : i do know how to close or exit appz from iphone"

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Similar Messages

  • Error occured installing ios 8.0 on ipad2

    Hi support user,
    I am trying to update my ipad2  to ios 8.0  without using using iTunes. Update simply fail with a indication as ' error occured installing Ios 8.0', i have tried deleting the update file and downloading it again but still the same error. Current ios version is 7.1.1.
    please let me know if same issue has been faced before and any probable fix for it.
    cheers....

    Same issue here with iPad Mini. What should I do??

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

    After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

    No codes on the error just msg in the center of the ipad tell me that without any codes :@

  • Adding Custom Labels Missing for Contact Numbers After Upgrading to iOS 8.0 and issue still exists on iOS 8.1

    I noticed that after upgrading to iOS 8.0 on my iPhone 5s, adding custom labels for contact numbers got removed. It still exists on iOS 8.1 as well. Is there someone who is facing a similar issue or can someone help me how to get that back. Any suggestions would be greatly appreciated.
    Thank you.

    Hi Yugendra,
    Thanks for visiting Apple Support Communities.
    I have good news. You can still choose a custom label in Contacts on iOS 8. The option should be below "Other" in the list of labels when editing a contact. This information is found in the iOS 8 user guide:
    Contacts at a glance - iPhone
    Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit. Then tap the label and choose one from the list, or tap Add Custom Label to create one of your own.
    Best Regards,
    Jeremy

  • Still trying to install iOS 5.1.1. before upgrading to iOS 6.  It's downloaded but won't install.  Message:  "An error occurred installing iOS 5.1.1" but no further message.

    Ever since iOS 5.1.1 came out, I have been trying to install it to my iPad 2.  It is downloaded but I get the "Unable to Install Update" screen which says, "An error occurred installing iOS 5.1.1" but no other information is provided.  Do I have to do a complete restore to get this to install?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

    Hi everyone,
    I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
    I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
    What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
    However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
    For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly."  When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
    I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
    Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
    Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
    Does anyone out there have a suggestion for us? PLEASE HELP!!!!

    Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

  • Error when I try to open Firefox. Says Firefox is running in the background and cannot open. Suggests closing that window or restart system. This has happened several times recently. I reinstalled but am still getting the error. Any thoughts?

    I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?

    This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
    I know this sounds weird, but it has worked for me about 80% of the time.

  • Error 3194 with iOS 7.0.4 restoring

    Hello,
    I want to restore my iPodTouch 5g with iOS 7.0.4.
    He is already with iOS 7.0.4 but he's jailbroken. I wan't to remove the Jailbreak.
    So I go in iTunes and make shift+select my ipsw (7.0.4) but after "preparing the ipodtouch" I see the error -> 3194.
    Why ?? I just wan't to restore my iPodTouch with the same firmware ??!!??
    I already tested modify the host file, TinyUmbrella, change computer and cable.
    If you can help me !
    Thank you very much !

    Not good.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly. Please

    Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated.

    Thanks for the quick reply. Would zipping the pdf protect it through email...like I said, this is the first time I've had this problem and I've been getting pdfs though email for years.

  • An error occurred downloading iOS 7.0.3

    I have an iPad that is currently on iOS 7.0, I am trying to update to 7.0.3 using the OTA update. I keep getting an error reading "Software Update Failed an error occurred downloading iOS 7.0.3" We have 1100 iPad Retinas and I have only seen this problem on 1 iPad.
    These devices came to us pre-enrolled in JAMF's MDM "Casper" using the supervision of apple configurator. These were configurated on a device that we do not have access to and they are set to not allow connection from another Mac so iTunes update is out of the question.
    I have attempted the update on several different networks and still no luck. I know it is not Apples servers this time as it has been weeks since the new OS was released and it hasn't failed on any other devices.
    It goes all the way through the download and then fails when it says "Preparing". Any ideas of something to try?

    Do the update using iTunes on your computer.

  • I've been trying for 2 weeks to update my iPhone 4S (7.0.6) to iOS 7.1 OTA but it fails all the time...telling me software update failed An error occurred downloading iOS 7.1. ..I need some support pls!!

    The problem occurres after the downloading is complete and when its in "Preparing Update" procedure and specfically in its last progress (near the end). Suddenly a message pop ups saying that "Software Update Failed" \n "An error occured downloading iOS 7.1."
    I've restarted the update process for the 20 th time!!! and reset my iphone twice to factory settings, but still nothing change, same error occures...
    My iPhone specs
    Version : 7.0.6 (11B651)
    Model : MD235AE/A

    Try updating by using iTunes via a computer.

  • Error exists when Admin2 loads same file in BW but loads ok for Admin1. Why

    Hi,
    Why does this error exists when Admin2 loads same file but loads ok for Admin1?
    A u201CCalendaru201D column in a flat file has value 200810  i.e. October of 2008.
    BW Admin 1:
    When Admin1 loads this file, it comes out ok as Calendar Year/Month as 200810 in PSA and the load completes without any error.
    BW Admin 2:
    Now, for the same file, when Admin 2 loads (on his laptop), the load fails and gets the message that, "....  00810 is not plausible..."
    Somehow, it drops the initial 2 from 200810 during the load for Admin 2.
    The suspicion was that Admin 1 had as Default in SU3,
    Date format:  YYYY/MM/DD.
    Admin 2 therefore switched his to the same Date format:  YYYY/MM/DD.
    Yet, the described load problem still exists.
    Any suggestions?
    Thanks

    Hi,
    Yes, it is the same infopackage for the same cube, Admin 1 used to do this load, and is now moving on to a different project, so the only difference is that Admin 2 is now doing the same job from his workstation but everything on the Data Flow is the same.
    In fact, Admin 2 went to Admin 1, after forwarding the .csv file and on Admin 2's workstation, the same file was tested by Admin 2, using the same infopackage, and it loaded without the above problem for Admin 2.
    Thanks

  • Software Update Failed An error occurred downloading iOS 8.1.3

    I can not get the phone to update the OS? I tried different wifi points, and still no luck. I tried this at least 6 times with the same result. It looks to download, and then says it is 'preparing' for a while, and then it pukes out the message "Software Update Failed An error occurred downloading iOS 8.1.3". Anyone know how to resolve this? Thanks!

    I've made a blog post on this error "
    SOFTWARE UPDATE FAILED AN ERROR OCCURRED WHILE DOWNLOADING IOS 8.X.X
    I hope this might help for those who are facing problem to update their iPhone or iPad. Here is the link https://shrishailtalukar.wordpress.com/2015/01/20/software-update-failed-an-erro r-occurred-while-downloading-ios-8-x-x-solution/

  • After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?

    After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?

    Hi Josephineapo,
    If you are trying to update your iPhone over-the-air rather than through iTunes, and you are having issues with installing it, then I'd like you to please follow the steps outlined below.
    If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
    Update does not complete
    If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
    When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
    If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
    Resolve issues with an over-the-air iOS update - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

Maybe you are looking for

  • "filter failed" HP printers fails to work over the network

    I got the common error "filter failed" when using my HP Color Laserjet 1600 through the network. Yet the printer works fine using directly from the computer it is connected via usb. This is my home network and I am not here often, but I am fairly sur

  • Adobe Digital Edition Errors/Troubleshooting

    When installing Adobe Digital Editions, I  received a corruption error message." This occurs because the installation software coming from  Adobe's Web site is unable to communicate and pass information through  your companies Firewall or PC security

  • I've installed Firefox on a new computer, but my bookmarks from previous computer are not listed in the Bookmarks menu. Suggestions?

    When I sign in to my homepage -same homepage as on previous computer / igoogle firefox browser- there are no listings in my Bookmarks menu. I assumed the bookmarks would automatically appear once I signed in. Did I assume incorrectly? If so, is there

  • Games compatible with ipod nano (gen 4)?

    Where are the games in the iTunes store that are compatible with ipod nano (gen 4 ...the tall skinny one without the camera)? Or have they been replaced/ deleted? 'Cause I tried finding them, and they're nowhere to be found; I know they used to have

  • How to crete this query in PL/SQL?

    I have a column, CA_MOVE, in table Table1 in Oracle that needs to be populated with the following logic: IF hist_mis_cds.manag0s = "", then Table1.CA_MOVE = "" ELSE IF hist_mis_cds.manag0s <> Table1.CA_MOVE , then Table1.CA_MOVE = "X" ELSE Table1.CA_