Still need my old Nokia for one last important function

The iPhone is a great replacement for my old Nokia E62/T-Mobile, but there's still one must-have feature that's apparently missing on the iPhone before I can give up my old phone.
I connect my MacBook via bluetooth to my Nokia as a gateway for unlimited GPRS internet access. I use it all the time when traveling.
Anyone know of a way to possibly do this using an iPhone?

Not currently possible.
HOWEVER, you can fairly cheaply buy an EDGE data card (at least in PC Card form factor - not sure what you'd do with a MacBook, but I bet they exist as USB dongles). You could then swap the SIM card from your iPhone out and put it in the data card. It would be using the same account and calling plan, so unless AT&T is running some very sneaky checks on what is using the data, that would work fine. I used to do this with my T-Mobile Blackberry SIM when I had a Blackberry that wouldn't tether properly to a Mac.

Similar Messages

After updating libraries system still needs the old one.

Hi. Almost always when I upgrade library and som other packages, system still needs the old one but at the same time it needs the new one. Like when i updated gnome and libffi, it needs libffi.so.5 and libffi.so.6. When I run gnome-shell with libffi.so.5 I've got:
/usr/bin/gnome-shell: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
When I upgrade it, new error appears:
/usr/bin/gnome-shell: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
It happend with more apps. I think something is wrong with my system and i don't know what.

I am using vim in the console but have gvim because it is compiled with X copy/paste support.
/usr/local/lib is empty.
I just updated fully (included a gvim and vim-runtime update).
I deleted the files I added earlier (libffi.so.5, libffi.so.5.0.10).
I've also rebooted.
As you can see below, vim needs both libffi.so.5 and libffi.so.6.
[ismo@it ~]$ ls -l /usr/local/lib
total 0
[ismo@it ~]$ vim
vim: error while loading shared libraries: libffi.so.5: cannot open shared object file: No such file or directory
[ismo@it ~]$ ldd /usr/bin/vim
linux-vdso.so.1 => (0x00007ffff292d000)
libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x00007f755e1b7000)
libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x00007f755df04000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007f755dce2000)
libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00007f755da97000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007f755d849000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f755d555000)
libSM.so.6 => /usr/lib/libSM.so.6 (0x00007f755d34d000)
libICE.so.6 => /usr/lib/libICE.so.6 (0x00007f755d131000)
libXt.so.6 => /usr/lib/libXt.so.6 (0x00007f755cecb000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f755cb91000)
libm.so.6 => /lib/libm.so.6 (0x00007f755c89c000)
libncursesw.so.5 => /usr/lib/libncursesw.so.5 (0x00007f755c63f000)
libacl.so.1 => /lib/libacl.so.1 (0x00007f755c437000)
libgpm.so.2 => /usr/lib/libgpm.so.2 (0x00007f755c231000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f755c02d000)
liblua.so.5.1 => /usr/lib/liblua.so.5.1 (0x00007f755be01000)
libperl.so => /usr/lib/perl5/core_perl/CORE/libperl.so (0x00007f755ba87000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00007f755b86b000)
libc.so.6 => /lib/libc.so.6 (0x00007f755b4ca000)
libpython2.7.so.1.0 => /usr/lib/libpython2.7.so.1.0 (0x00007f755b111000)
libruby.so.1.9 => /usr/lib/libruby.so.1.9 (0x00007f755acfe000)
libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 (0x00007f755aaf1000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007f755a8ea000)
libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00007f755a6c7000)
libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00007f755a3c3000)
libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007f755a077000)
libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x00007f7559e4a000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00007f7559c14000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007f7559a10000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f75597fd000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00007f75595f2000)
libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0x00007f75593ef000)
libXi.so.6 => /usr/lib/libXi.so.6 (0x00007f75591e1000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00007f7558fd8000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00007f7558dce000)
libXcomposite.so.1 => /usr/lib/libXcomposite.so.1 (0x00007f7558bcb000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007f75589c8000)
librt.so.1 => /lib/librt.so.1 (0x00007f75587c0000)
libpng15.so.15 => /usr/lib/libpng15.so.15 (0x00007f7558593000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0x00007f7558391000)
libpcre.so.1 => /usr/lib/libpcre.so.1 (0x00007f7558137000)
libffi.so.6 => /usr/lib/libffi.so.6 (0x00007f7557f2f000)
libuuid.so.1 => /usr/lib/libuuid.so.1 (0x00007f7557d2a000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f7557b0c000)
libattr.so.1 => /lib/libattr.so.1 (0x00007f7557908000)
/lib/ld-linux-x86-64.so.2 (0x00007f755e7e6000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007f75576d1000)
libutil.so.1 => /lib/libutil.so.1 (0x00007f75574ce000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x00007f755721e000)
libpixman-1.so.0 => /usr/lib/libpixman-1.so.0 (0x00007f7556f96000)
libEGL.so.1 => /usr/lib/libEGL.so.1 (0x00007f7556d75000)
libGLESv2.so.2 => /usr/lib/libGLESv2.so.2 (0x00007f7556b70000)
libxcb-shm.so.0 => /usr/lib/libxcb-shm.so.0 (0x00007f755696e000)
libxcb-render.so.0 => /usr/lib/libxcb-render.so.0 (0x00007f7556765000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007f755654f000)
libresolv.so.2 => /lib/libresolv.so.2 (0x00007f7556338000)
libbz2.so.1.0 => /lib/libbz2.so.1.0 (0x00007f7556128000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f7555efe000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f7555cfa000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f7555af4000)
libX11-xcb.so.1 => /usr/lib/libX11-xcb.so.1 (0x00007f75558f2000)
libxcb-dri2.so.0 => /usr/lib/libxcb-dri2.so.0 (0x00007f75556ee000)
libxcb-xfixes.so.0 => /usr/lib/libxcb-xfixes.so.0 (0x00007f75554e8000)
libxcb-shape.so.0 => /usr/lib/libxcb-shape.so.0 (0x00007f75552e5000)
libwayland-client.so.0 => /usr/lib/libwayland-client.so.0 (0x00007f75550db000)
libwayland-server.so.0 => /usr/lib/libwayland-server.so.0 (0x00007f7554ecd000)
libffi.so.5 => not found
libgbm.so.1 => /usr/lib/libgbm.so.1 (0x00007f7554cc7000)
libglapi.so.0 => /usr/lib/libglapi.so.0 (0x00007f7554a82000)
libudev.so.0 => /usr/lib/libudev.so.0 (0x00007f7554874000)
libdrm.so.2 => /usr/lib/libdrm.so.2 (0x00007f7554669000)
libffi.so.5 => not found
libffi.so.5 => not found

My MacBookPro is less than 3 months old and for the last few days, it has been itslow to load anything, especially web pages. I get the rainbow swirl when loading or reloading. I guess I am spoiled. Up until now it was lightening fast!

My MacBookPro is less than 3 months old and, for the last few days, it has been loading so slowly, mainly with webpages. I have gotten the swirling rainbow "thinking" icon more in the last days than I have since I bought it. I know I'm spoiled and expect it to be faster than lightening (which it has been) but I am worried that I may have been compromised in some way, or, is there anything I can do as administrator to clear out some "junk"?

Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
Given that your MacBook Pro is so new, you should certainly contact AppleCare and take advantage of the free telephone support included in its purchase price.
Until then, if you are motivated to investigate this yourself consider the following:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or "failed".
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

Just ordered new iMac do I still need a modem/router for Internet access

Just converted to apple,ordered a new IMAC but little confused on Internet access.
does the extreme still need a modem/router,just a little confused after reading all the comments about poor connections etc.
Old windows soldier sorry if a little vague .

The AirPort Extreme is a router, but it is not a modem. You still need your existing cable or DSL modem. That device is usually supplied by your ISP and may or may not include the functions of a router.

Is a Mac/PC still needed as a "hub" for iPad?

Hi,
I'm thinking of getting rid of my home PC in favour of an iPad, as all I use it for is surfing the web. Do I still need a PC to be able to sync between my iPhone and iPad or can this all be done through the cloud now?
Tony

You do not absolutely have to have a computer any more in order to use an iDevice that is running iOS 5.
Just remember that if you buy movies for the iPad - you cannot download them again from iCloud - apps, music, TV shows, books - yes - but not movies.
So if you are a movie buff and want to buy a few and keep them on the iPad only - that is the chance to have to take if you do not sync with iTunes and something goes awry on the iPad.
If that is not an issue for you - then no - a PC is not required.

What types of containers need to be used for one-to-many relationships

While looking at toplink examples, I noticed that synchronized containers only are being used for one-to-many relationships even though it's not required by the documentation.
Is it required?
Also how does merge affect it? I'm gettning concurrent modification exceptions from time to time, while using iterators for containers from these relationships.
Does it mean that I have to use enumeration on vectors only and toplink merge isn't atomic? So there is no isolation when toplink merges the data from unit of work into identity maps?
There is nothing about thread-safety and threading aspects of accessing containers for CollectionMapping based relationships. Please advise.

Non synchronized containers can be used but may require some extra code to handle concurrent access. If you are accessing the objects from the shared cache (not cloned in a UnitOfWork) then you will need to isolate your iteration within a synchronized block, synchronized on the collection itself, or handle the ConncurrentModificationException if they happen rarely.
Because these are shared instances of these collections other threads may be writing to them while they are being read from.
--Gordon

Two printers need to be maintained for one key combination

Hi Experts,
Requirement:-For one condition record two print out has to be determined on different printers.
As per my understanding we can maintain only one printer for any key combination here as per the requirement if some one has any idea if we can maintain two printers for the same key combination.
Regards,
Dharmesh

Hi,
You cannot assign two printers to one single combination of Condition record.
This functionality is not possible.
regards,
santosh

IPhoto didn't create a new event for my last import

I imported some pics from my DSLR via an SD card just now. The photos are visible if I select "Last Import", but not otherwise. iPhoto has always defaulted to creating a new event each time I import (one for each date on the imported photos). I haven't changed any settings whatsoever, but I can't see these photos anywhere except "Last Import".
Any clue why?? And how to fix it?
Tks!
Butch

If the Photos are under 'Last Import' or 'Last N Months' then they are in the Library somewhere, just not where you are expecting them to be. We know this as both Last Import and 'Last N Months' are not places, just listings of elements in the the Library.
The two most common reasons that they can't be found is either an incorrect date on the camera or the Sorting (View Menu -> Sort Photos - or Sort Events, as appropriate) has changed.
Quick route to find them: Right-click on one of the images in Last Import and select 'Show Event'. This will bring you to the image in the Library.

Still need a new firmware for linksys one/cisco svr3500

now i tried over a year to just find someting about this either firmware or manuals or someting.. it freezes after a little time
and this didnt help me the phone support just send me around in a circle to ppl that dosent know anything and left me only with a phone bill since im from denmark
and after all that time used for nothing and have an expensive router just collecting dust that it just not funny anymore
1. May 10, 2010 6:17 PM (in response to Chris Rasmussen)
Re: linksys svr3500
Hi HightowerDK,
Contact the BAC (Broadband Access Center) for Linksys One support if you are in the USA on 1 866 870 5826
Regards,
Cindy Toy
Cisco Small Business Support
Community Manager

Hi,
Thank you for your quick reply.
My DVD drive is a SD-R6112 I found a frimware update on the page you have given searching on the model of my drive but when executing the exe file it says I don't need the update and program stopped.
On another forum someone said the third party firmware I installed should have changed some calibration data of my drive thats why I can not read any DVD-R anymore and no firmware will fix it anymore.?
I still can read CD's and original DVD's but I can not read DVD-R's anymore which is very annoying.
Do you know if Toshiba technicians could re-calibrate my drive?
Can I buy an intern DVD drive for my model?

Discover It i was itching to apply for one last card untill I garden for 1 year

Thank you and yes taxi is right 2013 is not long ago at all. Last time they denied me was in May and it was for to many recent auto inquiries(manage to challenge them and have it removed),the charge off, and my student loan balance to loan amount was too high 75%... I paid it down to about 45%.
My auto inquiries were removed and my student loan balance was reduced however the chargeoff still remains.
I am aware that I need to garden and I plan to because I am shooting for the best buy credit card either store or the platinum (soon to be visa) and judging by 5 New accounts this year and 2 more accounts being added and the inquiries, best buy might look the other way.
I just hope these new accounts being open so close to the dates don't raise even a red flag in 3 years from now.

Peanut6 wrote:
I just applied for my final credit card discover it and boy was the application talkitive. i mean I supplied all the information and clicked submit application than the system said wait 60 sec it took me to another page to answer more questions time of employment and time of residence stuff like that i make $36,500 a year and work here for this amount of time blah blah blah. after submitting that page it said to wait 60 sec and than it said You're almost done,Thank you for your applicationwe just need afew more minutes of your time I called and spoke to a gentleman and he said "sorry we cannot make any credit dicision right now our system is undergoing maitenance call back in 24hrs" wow this is my 3rd time that i have applied with in every 2-4 months each My Current scores(Updated today) EX 662                15 inquiries
Equifax 665        9 inquiries
TU 691              5 inquiries
I have a charge off from BOA in 2013(settled for less than full amount)
120days late department of education in 2013(paid down 45 percent)1 collection in 2013 (paid full amount)4 recent New accounts from JANUARY-March 2015 amd two recent inqiuresMy utilization ratio is 11%my aaoa 3.4years Current cardsBank Of America Cash Rewards $2000Home Depot Consumer $6000Walmart Store Care $5000QuickSilver One MC $2000Wells Fargo Secured Card $500 todays approved cards but not yet reportedCpital one QuickSilver VISA CL$3000Care Credit CL$5500  what do you guys think will be the result when i call tomorrow? hmmmm lets see what you guys think. i am going to call tomorrow and update the results of it hereSorry you got denied, i was lucky to get approved but with low CL...question: why did you apply for a care credit card? you have decent cards already and i dont think you needed that one. Just IMO

Do i still need a redemption code for subscription purchase

I have had Premiere Pro put on my computer using a friend's adobe ID, i switched it to my ID and purchased a plan for just Premiere Pro. all steps followed to the best of my knowledge but when i start the programs (i have Premiere Pro CC and Premiere Pro CC 2014 for some reason) but both ask for a redemption code i never received. I've raked my brain and searched the internet for hours but to no avail. why does the programs ask for something i never got and only help i find for my question was that subscription based purchases don't need one.

>put on my computer using a friend's adobe ID, i switched it to my ID
That is not according to the license agreement Licenses and terms of use | Adobe and it appears you still have "something" from your friend on your computer
Log out of your Cloud account... uninstall... run the cleaner to remove all left overs... sign in to YOUR Cloud account and install fresh
-http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Do I still need two hard drives for video editing today?

I have heard time and time again that editors should use two hard drives when editing in Final Cut Pro, it was even written in part of the Final Cut Pro 7 user manual. One was used for the system and Final Cut Pro software and the other was used for storing video.
Is this still true with the newer SSDs available today? Since they do not use a rotating disk, can't my video and Final Cut Pro X work to maximum performance? Or is it still a bad idea to have your video and software on the same drive?
I would be curious to what some have to say and thank you in advance for your help.

Will it work on one drive ?.. in short Yes. Will it work well when I start doing multiclips with lost of angles and a separate track all being ingressed from HDV and wav? .. I suspect not so well .. You see the bottom line is that you are correct in so far as SSD's have no moving parts but the input/out speed (I/O) is not all that fantastic. Multiple video streams when doing multicam (for example) will cause a huge data quantity needed at fast speeds to be shipped back and forth .. SSD's are fast at boot up but after that the there is not all that between them and ESATAII internal drives (I have four ESATAII in my Mac Pro)..
Best practice advice is to have a fast separate drive, preferably connected via Thunderbolt or FW800. The whole thing just works more efficiently and - better. All in all I would say yes if you can afford it and are going to be doing lots of editing which gets more advanced you will not regret the second drive investment.
Jim

Do we still need 3rd Party aps for phone calls?

Currently have 2 Skype numbers subscriptions and have always used SkypeMate as my 3rd party ap for connections, which works perfectly. Yesterday, I forgot to open SkypeMate after initializing Skype, but all my Skype calls, including one from USA to NZ, still went through without SkypeMate. This morning, to test it again, I called from my mobile to my Skype number and lo and behold, all calls went through without turning SkypeMate on. Granted, I don't get a dialtone when calling without SkypeMate enabled, but once the number connects, the phone rings as usual and the calls connect flawlessly. So, the bottom line question is: do we need 3rd Party aps when using Skype as a regular telephone? Or has it always been this way and I just discovered it by accident?

It's always been like that. Without Skypemate the phone turns into simply a USB mic/speaker. You will be able to receive phone calls, and answer them manually on the computer you just won't be able to dial out using your phone's keypad. When older versions of Skypemate become incompatible the first thing to go is the keypad capability. Semi functioning versions of Skypemate can still give you the ability to answer phone calls by lifting the receiver or its equivalent. So if you don't require the ability to use the keypad on the phone to dial out then you can simply continue to use the device without Skypemate. I'd be surprised if answering the phone on the keypad actually worked, as I know that functionality does not work with my device without Skypemate and and older version of Skype (6.21).

Does white need to be transparent for one color t-shirt printing?

Hi,
I made one color (black and white) graphic as an Illustrator file for a guy who is printing it with one color on t-shirts. Some of the white areas are formed from white objects on top of black objects and some are transparent areas like the background that shows when the Show Transparency Grid is selected from the View menu .
The guy told me his printer said that there are white objects in the graphic that need to be transparent.
I don’t have any other information. I don’t know what kind of printing, printer, and t-shirts are used. Initially the guy told me not to worry about that, he will prepare the graphic for print but now he is asking me to turn the whites to transparent. Given the situation, I’m suspecting if this is the right approach.
I would like to learn the right way of doing this and I will greatly appreciate any advice, and input.

If you make a compound path...the artwork will be OK.
That cannot be assumed as true without actually seeing how the artwork is built. In any of these situations, a normal even-odd winding will cause unwanted black reversals:
Difference regions between any white and black fills (for example a white path only partially overlapping a black path).
Intersection regions between two or more white fills.
Intersection regions between two or more black fills.
Without knowing the artwork stack, the most likely "one-size-fits-all" solution would be the Merge Pathfinder. But even that assumes that all paths are filled, unstroked paths; no Brushes, etc.
But as has already been stated, when printing separations or composite, white means "no ink" unless the white is a spot color Swatch. The strange-sounding request from the printer may also be due to white objects being accidently set to overprint.
The surest thing for a beginner not understanding any of the above would be to just rasterize the whole thing to 1-bit at a moderate resolution, assuming it is all line art and is drawn at 100%.
JET

I need the "old" FCPX for my Mac book

Where can I download the "old" fcpX, I bought one two years ago and use it on my I Mac.
Now I want to use it on my Mcc book pro (an old one, MAC OS X 10.6.8 8GB Ram) if I travel

Not trying to police anything, but if you have a legitimate, licensed version of Final Cut Studio on your iMac, it was installed from a set of disks _ not a download.
That license allowed users to install on one desktop and one laptop, So those same disks should be used to install the apps, including the "old FCP" on your MBP.
I don't recommend copying the apps. It will probably work fine most of the time but far too often, problems arise down the line that would be avoided by a "clean install" of the apps; then – very importantly –successively running Software Update until there are no more updates.
If you would like more input on this, post over at the Final Cut Studio forum.
Good luck.
Russ

Still need my old Nokia for one last important function

Similar Messages

Maybe you are looking for