Still no joy re: headsets & speech?

2 years ago, this post http://discussions.apple.com/click.jspa?searchID=3706388&messageID=1442744
mentioned that "1.5 Bluetooth firmware states clearly that Bluetooth headsets may not be used with...Speech"
so now i have Apple Bluetooth Software Version: 1.9.5f4 and a plantronics 330 headset that i've successfully paired & talked to/from (although the sound input pref.pane is flakey: sometimes doesn't show any input level)-:
so are we still s.o.l?

let me add the keywords 'voice recognition'

Similar Messages

  • My iPad will no longer connect to my Sony wireless speaker after downloading the latest IOS software. It worked perfectly before. I have reset and reinstalled the speaker through NS setup but still no joy. Any advice would be most welcome.

    My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.

    Hi,
    When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
    So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
    You may try the steps below as of now and check the results.
    We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
    Once it is docked try the steps below:-
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    Open the above link; and then perform the Factory Reset as shown in Solution Two.
    Once completed try connecting to Wireless and check the results.
    though I am an HP employee, I am speaking for myself and not for HP.

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • Creative cloud quit, says "download again" and still no joy, same message.  Camera raw gone, Existing Lightroom and PS-12 won't talk.  What's up?  Looks like Creative Cloud trial botched up something. iMac

    Creative cloud quit, says "download again" and still no joy, same message.  Camera raw gone, Existing Lightroom 4.3 and PS-12 won't talk.  What's up?  Looks like Creative Cloud trial botched up something. iMac
    Tried a number of "fixes" from blogs.  No joy.  Deleted all my adobe apps, rebooted, and Creative Cloud says it needs to reload.  Went through that process, and it quit near the end, saying it needed to reload and directed me back to same Adobe site.  Hmm.  Round and round we go.  How do I get off of this loop and get my Adobe Lightroom and PS working fine again?  Whole episode started after loading CC and then PS said it didn't have Camera Raw.  Went and downloaded that, wouldn't load and said I needed Adobe Download Diagnostic (or something like that) went to suggested link, whereupon it tells me it is no loger available. 
    Looking forward to cleaning everything off and starting over!!  Any input gratefully accepted and I will NOT be trying CC again.  I am sure it is just fine, just not for me, now. 
    David Balcaen

    I forgot to write down my computer specs:
    iMac 27 Mid 2011
    2.7 GHz Intel Core i5
    4 GB 1333 MHz DDR3
    AMD Radeon HD 6770M 512 MB
    OS X 10.9.2

  • Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box but no joy, i have tried resetting the iPad but still no joy, have tried different plug sockets, different plugs/cables, help

    Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...

    Grumpy Gator,
    Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
    And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
    If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
    Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
    Hope this helps.

  • Hello, My software is asking me to sign in and i have a valid ID but it just spins out, the icon in the toolbar is blank so i have no way to do this. I have reinstalled the CC app but still no joy.

    Hello, My software is asking me to sign in and i have a valid ID but it just spins out, the icon in the toolbar is blank so i have no way to do this. I have reinstalled the CC app but still no joy.

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
    or
    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    OR
    Asked to sign in after paying may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    or
    http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

  • TS1389 I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Pa

    I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Paul

    Sounds like you have a "damaged track" or "damaged file".
    This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
    My situation: I bought the album today for my Mac,  MacBook Pro, iPad 2, and iPhone 4S devices.
    Issue: One song (only on my MacBook Pro) would not play, instead display "
    EX: left"
    Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
    2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
    3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
    4. Check your Music Library for your song (Should download inside the associated album) and hit play.
    EX: (Song I purchased that wouldn't play because of authorization, playing)
    Enjoy!

  • My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

    my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

    my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

  • Authorised.i have removed itunes program and reloaded with lastest release still no joy

    when i try to down load my content from the cloud i get a error message not authorised on this pc.I have removed the itunes and reloaded with the latest release still no joy.Also have checked on my account where it states my pc is authorised. Any suggestions Thanks

    Sorry about the delay, pack. Brooding over what to try next.
    I'd like to doublecheck the malware possibilities with another malware scanner.
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

  • Frozen ipad 2 32 wi-fi os 6 .1 Tried restore , still no joy

    Hi, Tried restoring , still no joy.It did work for a bit when I restored it a few days ago after the same problem, now its done it again amd the system restore has not worked.Must be a software faulyt as its never been damaged.
    Any tips would be great.
    Had a look at dfu mode, not sure what this is and if it will help.
    Thanks
    Ray

    Hi, Tried restoring , still no joy.It did work for a bit when I restored it a few days ago after the same problem, now its done it again amd the system restore has not worked.Must be a software faulyt as its never been damaged.
    Any tips would be great.
    Had a look at dfu mode, not sure what this is and if it will help.
    Thanks
    Ray

  • TS1559 Done the update, did the reset- still no joy :-(

    Done the update, did the reset- still no joy :-( .... Anyone?

    Have you looked in your applications folder since you downloaded the Combo update?
    That is where it should be.   I also keep a copy in the dock, taken from the applications folder.

  • Rented film, fully downloaded (eventually) press play now then screen goes to authorizing, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

    Rented film from Apple TV  fully downloaded (eventually) press play now then screen goes to authorizing for 10 mins, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

    First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion.  To run Snow Leopard it has to be an Intel processor, not a G4.  What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
    Second, if you have erased the hard drive there should not be remnants of any prior content.  Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems.  You may want to consider simply replacing the hard drive so there are no questions about faults.  A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
    Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install.  If it continues to refuse, then it sounds as though there is a fault with the hard drive.

  • HT1541 the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!

    the email informing the giftee that album has been sent has not arrived after many resends. Email address is fine. Have even tried a second email address and still no joy!!!
    Anyone out there with any ideas?

    Your dad should go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Iphone 4s - fully working after ios7 update, but since ios7.0.2 update wifi is locked out. Tried all of apples recommendations and still no joy. Is there anyway around it?

    Iphone was working great, even after ios 7 update. However, since ios 7.0.2, the wifi has greyed out and wont work. I have done all the apple recommendations and even reset phone with apple tech help, but still no joy - is apple going to do another update to fix this problem???

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • I have  MACBOOK PRO - 3 years old, lately it is running very slow. I have reset it to factory settings - no joy. Did pressing Cntrl, option, shift   start button for 10 secs - still no joy. Any suggestions?

    I have  MACBOOK PRO - 3 years old, lately it is running very slow. I have reset it to factory settings - no joy. Did pressing of  Cntrl, option, shift keys and  start button for 10 secs - still no joy. Any suggestions?

    Were you trying to get to Recovery mode to repair the hard drive or reinstall?
    OS X: About OS X Recovery

Maybe you are looking for

  • WAS not getting started!

    Hi, my system s (sap bw NW04 platform) SAP web application server is not getting started.It is of 6.40 version. it always stays in yellow colour even after 1 day! i had found that in process list, dispatcher is stopped! i am pasting the log at develo

  • "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

    Hi, I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result t

  • External Antenna Not Recognized

    I am having trouble with a weak signal on one of my Mac PB laptops(titanium model) when I am in the furthest bedroom from my Airport, so I recently purchased a used Dr. Bott external antenna for my AEBS (the white dome-shaped one) which has an extern

  • Javascript based on PL/SQL function.

    Hey all, I'm developing an application with Apex and have run into a problem. I have a form page with the standard create, delete and cancel buttons. I need to be able to click the Create button, which will run a PL/SQL query, and based on the return

  • VBS script for auto integration for multiple channels

    Hello there, I would like to create a Diadem script to auto analyse multple channels in a tdms file. As I haven't yet gone on the diadem advanced course, I need help. I have tried the recording mode but I must pick each channel manually then integrat