Still No Network Drives Showing in Bridge but Everywhere else?

I am still somewhat confused because if I go to open a file in CS4 I have the option to browse my network; there is a network icon there and as soon as I click on it my network is immediately accessible. When I open up Lightroom to import pictures I have the same network icon and as soon as I click on that the network is again just there.
However when I open up Bridge, it says building criteria and when it has finished it only shows me the drives attached to the computer I am currently using and there is no network icon to click on, so why is this the case when Photoshop can see it and so can Lightroom?
Can anyone figure this out because it just does not make sense!

The issue with your artwork not showing is due to the size of your artwork - I asked Apple to take a look at your artwork - please don't change anything at this time.
We will get back to you once all is fixed or if there is something you need to change.
Regards,
Rob W
libsyn

Similar Messages

  • Windows 7 mapped network drive. shows as disconnected, cannot remove, not showing in registry

    a mapped drive shows as disconnected but still work in terms of getting into the shared network folder on our NAS.  but i want to remove it.  the commapnt prompt command wont do it.  you cant disconnected it because it doesnt see a networked
    drive.  and i looked in the registry and there isnt a registry entry for the mapped drive. in the mountpoint2 or whatever. 

    To troubleshoot, disconnect the connection first. Please refer to:
    How To Disconnect Non-Mapped UNC Path “Drives” in Windows
    http://www.howtogeek.com/howto/16196/how-to-disconnect-non-mapped-unc-path-drives-in-windows/
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Canon ir 2420 ufrii LT network printer show only processing but print not receive

    My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share ,  Thaks for you support  

    I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
    However there are 2 aur packages that provide the UFRII driver :
    - cndrvcups-lb (built from source)
    - cndrvcups-lb-bin (uses the binaries)

  • When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

    When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

    Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
    If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
    Also what is the version of ACR in the title bar?
    Gene
    Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

  • Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" help any1?

    Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?

    Hi chelsinator,
    You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
    The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
    Cheers,
    GB

  • P2035n not connecting to network, it show on it, but try to connected and it fail

    p2035n not connecting to network, it show on it, but try to connected and it fail. it was working for a day then  cant connect to it no, even after reinstalled. it looks like the printer is shut out.

    I had the same problem with my iphone 4S. I paired it to a Bluetooth device (Bose Sound speaker) and accidently "forgot" the device. After that I couldn´t pair it again, not could I connect it to my Time Capsule, it said the password was incorrect. However, both devices worked perfectly with another iphone and my mac. I tried resetting network settings, the phone, the wifi connection, but nothing worked. Eventually I ended up restoring my iphone, backed it up to the latest backup, and BINGO! everything works!!! Good luck!!!

  • Network drives showing repeating copies of directory content

    I'm experiencing a weird issue with mapped network drives under Windows 7. Sometimes it will list the contents of a directory normally, others it will list hundreds of copies of the contents, and sometimes it will keep listing them over and over without stopping. Occasionally refresh will show the contents correctly but it's a **** shoot. It's happening on all network drives. Server is running OES under SUSE 11 sp3 with the latest update from the beginning of the month. Have not done the distribution upgrade yet. Workstation I'm on is running Novell Client 2 SP3 for Windows 7 (IR5). I haven't noticed the issue on XP computers. Any idea what could be causing this? It seemed to start sometime in January or early February.

    Originally Posted by Mysterious
    On 03/12/2015 06:56 PM, FUBAR wrote:
    >
    > Mysterious;2349465 Wrote:
    >> On 03/11/2015 07:26 PM, FUBAR wrote:
    >>>
    >>> No I don't have that patch installed and the problem started before
    >> that
    >>> patch was released. Also there is no problem accessing files it's
    >> only
    >>> when browsing directories that the problem shows up.
    >>>
    >>>
    >>
    >> there is a TID about it
    >
    > You wouldn't happen to have the number or a good search phrase to find
    > it? I tried everything I could think of before starting this thread and
    > couldn't find anything like I'm seeing.
    >
    >
    tid7016264
    Thanks that looks like the issue I'm having. Guess it's just wait until it's fixed since there is no resolution.

  • Corrupted RAW files show in Bridge but not Photoshop?

    Hi,
    I have recovered some RAW files that were accidently deleted but most of them are corrupt in windows explorer (using recuva).  Adobe Bridge can see them but nothing else will open the files (or see them).  I really need to edit these files, any help would be appreciated.  I'm on win7 64 bit.  with adobe bridge cs 5.

    What type of RAW files are we talking about, NEF,CR2 or other?
    Bridge is just a flle browser, and RAW files are opened and edited in Adobe Camera Raw.  Do you just get a thumbnail, but it willl not open in ACR?
    Does ACR work with other RAW images that have not been corrupted.
    Do you have a backup (highly recommended) of these images somewhere?  Should be on seperate physical drive or on a DVD.

  • Windows 8.1 search of network drives shows UNC path based results

    How do I go about showing the network drive based path as opposed to the UNC based path in Windows 8.1?
    In Windows 7 when the user searched for files on a network drive it displayed results that contained the network drive. In Windows 8.1 these searches yield the UNC
    path.
    For example, Windows 7, if I search for TestFile.docx on Z: it will show a result such as "Z:\SomeFolder\SubFolder\TextFile.docx"
    Windows 8.1, if I search for TestFile.docx on Z: it will show a result such as "\\SomeServer\SomeFolder\SubFolder\TextFile.docx"

    Hi,
    Actually, I tested in my Windows 8.1 system, the result is that it does show (example)"Z:\folder" as the search result, like as Windows 7 system, here's the snapshot:
    Or am I missunderstanding something? a snapshot from your result would be helpful.
    Yolanda Zhu
    TechNet Community Support

  • My ipod touch screen has gone white with bright white spots, I have restored it but it is still white.  It shows in ITunes but I cant do anything with it.  Can anyone help please

    My Ipod touch screen has gone white with bright white spots on it.  I have restored it and it shows in ITunes but the screen is still white.  Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired).  Any help would be much appreciated.  Thank you in advance.

    If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem.  I would make an appointment at the Genius Bar of an Apple store.

  • LENOVO U310, windows 7, SSD drive showing in bios but not in the disk management

    Hi,
    I recently installed windows 7.
    But after installing I found out the the computer is not waking from sleep. When I enter the password and press enter the screen becomes blank. I have to again restart the system.
    Doing some googling I found out that SSD drive does the caching when iRST is used.
    So I tried to look for SSD in the Disk management, But I can see only 1 500 GB HHD. It doesn't show the SSD drive.
    Even the Intel Rapid Storage technology is not detecting. It shows internal empty port 0.
    But when I checked in the BIOS, in the system information i can see the SSD mentioned.
    If any one of you have faced the same problem and/or know some work around then please help.
    Thanks,
    Sumit

    Sounds one of the following problems:
    1.) The drive is formatted MBR w/ win 8 features enabled / legacy disabled.
    2.) A "dynamic" drive is present.

  • Network drives show while connected

    I have a WD NetworkCenter Drive connects to the network via CAT5, here is the poser, this will not connect or be seen while I am wireless, but once I plug in the CAT5 Cable, all SHARED drive connections are there. Would some one please tell me what am I missing here? I have a MBP with the latest and greatest OS, up to date, and am connecting through and Airport Express.

    Thank you for the reply
    1. I have looked all over as to where I can set the router mode and cannot find anything referring to what you posted.
    2. The default router address the the home is based on starts with 192.168.58.55 the WD Netcenter Drives IP is 192.168.58.106 , so to me thats GOOD TO go Correct?
    3. I am accessing the Airport Express Via, the Airport Utility in the Utilities section on my MBP

  • External TM drive shows zero contents, but no space available

    I bought a new iMac i7, sold my G5 Quad and wanted to recover some files from my G5 Time Machine backup.
    I connected my TM external 1.0TB drive to the new iMac. It shows free space of only 100GB, used 870GB... but contents zero, nada, no back up, nothing! The drive is empty, except I only have 100GB "free space".
    I'm freaking out inside - just a little, since there must be slightly over 175GB of images now missing, residing somewhere — invisibly — on my TM drive. Any suggestions or help anyone?

    Charlie Fellowes wrote:
    Hey, thanks... but I tried both those options earlier. The +'Browse Other TM disks'+ saw nothing,
    What do you mean? Did the disk appear in the list of disks containing TM backups?
    yet TM prefs clearly tells me there is only a shade over 100GB left on this (1.0TB) drive.
    What do you see if you look at the disk with Finder? (Be very careful not to move, change, or delete anything there via the FInder). There should be a single folder named Backups.backupdb. Inside it should be a single folder with your old computer's name; inside that should be a series of folders with the dates & times of backups.
    My data transfer has been successful with two exceptions — music and images.
    WHAT data transfer? What did you do? Didn't you say nothing was there?

  • Why does the drive shows 55.39GB but samba share of the drive shows 31.31GB

    Hello,
    I've got a mac book pro late-2007 2.2GHz 100GB drive with lion installed. I just freed up a ton of space totaling 55.39GB of space according to Finder on the macbook pro itself. I go to mount it via smb/afp (tried both) and the drive appears with only 31GB of space. What happened here?
    I need all 55GB of space.
    Please advise.
    Shinko

    It sounds like you have a partitioned harddrive with at least two partitions and Samba is reporting the space remaining on It's partition?  Possible?
    Hope this helps

  • How can I change the BlackBerry Link Network Drive mapping from Z: to something else?

    Hello,
    I generally have a mapping to my NFS server on Z:, and my iTunes library has a relative path to Z: for all of my music - the fact that Link is automatically picking Z: as my network sync target for my device does not work for me to sync music, or anything really. I can't figure out how to change this value to something else.
    I found the registry key: \HKEY_CURRENT_USER\Software\Research In Motion\Device Manager\Device Settings\<DEVICENAME>\VolumeMapping with a default blank REG_SZ - can I use this key at all to manually change drive mappings for my device? If so, what is the key/value pair I need and will this mess up any assumptions taken inside the Link software for synching?
    ... Also, I have a Feature Enhancement Request to go along with this issue: Add a "Change drive map letter" button beside the "Turn on wireless connections to my computer" button in Link, and add the same option in the context menu to the 'Device Manager' for the mapping (which currently just says 'Explore').
    Thanks for the help,
     - Jeff

    I do not know a lot about this subject but since Device Manager is not a Device and the BlackBerry Phone is not recognized as a Device in Disk management unless Mass Storage is turned ON it looks as if by design you cannot change the Drive Letter.
    Also if Mass Storage is turned On in the Phone Settings File Manager and BB link will not work but the BB Phone will then be recognized as a Device in Disk Management and the Drive Letter can be changed, this has no effect on the Drive Letters for Device Manager.
    Normally to change the Drive Letter and Paths of a Device once the Device is plugged you would go to Administrative Tools, Computer Management, Disk Management, right click the Device and choose "Change Drive Letter and Paths"
    Changing the Registry or Uninstalling Device Manager but keeping BB Link or looking for a Utility that can change the Drive Letter such as the one that many XP users had called TweakUI (only worked in XP) or changing the Drive Letter for your Network may be the only way.

Maybe you are looking for