STILL "No valid licence for this book" message. Help please.

I bought my first ebook in December from Waterstones for my Elonex ereader and this was ok. The next two books purchased from Waterstones came up with the message, "No valid lisence for this book." After trying to solve the problem of not being able to open/read them I ended up with, "Too many activations." I managed to get my activations re-set, yet am still unable to open/read the books because  I am getting the same message, "No valid lisence for this book." I have sent the case to Adobe, but as I waited and waited for the activations to be re-set I could be in for another long wait! Can anyone help please.

I am having the same problem with my elonex 511tEB. Did you manage to get yours sorted out and can you please tell me how  to do it.
I would be very grateful if you could help me as i am puzzled with it all.
My email add is : [email protected]
Regards
Aileen Buckley

Similar Messages

  • "No Valid Licence for this Book"

    I've authorised my computer and my ereader (Elonex) and
    have transferred over the ebooks in the correct way, but when I try to read them on the ereader it states "No valid licence for book
    ". I therefore can't access anything on there that I have just paid for...does anyone know what this means and what needs to be done
    - searched forums and FAQ's on sites for both Adobe and Elonex and nothing.

    I am having the same problem with my elonex 511tEB. Did you manage to get yours sorted out and can you please tell me how  to do it.
    I would be very grateful if you could help me as i am puzzled with it all.
    My email add is : [email protected]
    Regards
    Aileen Buckley

  • I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

    I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

    You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
    http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
    Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
    http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
    Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
    http://fastmac.com/bluetooth.php
    In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

  • No valid license for the book

    I have just bought a Hanvon ereader and it has adobe digital editions. I have authorised it as a device on my adobe digital editions on my computer and correctly transferred the book to my device but when I try to open it I get the message "no valid license for the book". Can anyone help me as this is the 2nd ereader I have tried with adobe digital editions and I haven't yet been able to read a library book on either one. My ereader is on the adobe supported devices list, it is a Hangwang Pty Ltd Wise reader N520.

    I want to add to this, after searching and reading many posts on this forum I have now checked the item info for the epub books I downloaded from my regional library and they say the followiing:
    Reading allowed on any device until 31/3/2014
    Copying not allowed
    This is frustrating as our regional library recommends download with Adobe Digital editions for reading books on any ereader device. Can anyone tell me how I can download direct to my ereader so I am not trying to copy from ADE on my pc to my ereader. I am desperate to get this sorted out.

  • Dreamweaver CC and Windows 8.1 - Can't Find A Valid Editor For This File Extension

    Was running the latest version with no issues and then I loaded Office 2013 .. Now when I am in the remote site and try to double click on a .cfm file, I get a dialog box..Can't Find A Valid Editor For This File Extension..
    I tried the support chat and they said Dreamweaver support was not available, try again later???
    So I thought I would reinstall the CC version and now I can see the Dreamweaver icon next to the files but still ... can't open the file..
    Any assistance would be appreciated?
    Leo

    The issue is only in Windows 8.x where when Dreamweaver CC is installed, it is not able to turn on the file type associations by default.  The workaround for now is to manually add the extensions both within Windows and then within Dreamweaver CC itself.
    Go to Control Panel > Programs > Default Programs > Set Your Default Programs and select Dreamweaver CC and then select 'Choose defaults for this program' and Select All or the extensions you want to open in Dreamweaver CC
    Start Dreamweaver CC and go to Edit > Preferences > File Types/Editors and add '.cfm .cfc' to the extensions and then add C:\Program Files (x86)\Dreamweaver CC\Dreamweaver.exe then click on Apply and Close
    That should be it.
    James

  • DW CC: Can't find a valid editor for this file extension

    Hi,
    I am using dreamweaver cc for 1 month now. I have been having difficulty opening .asp file.
    In the File panel, when i click on one of the asp files, the error message is 'Can't find a valid editor for this file extension'.
    To solve this problem, I will right click on the file and choose Open with > Dreamweaver.
    However, this is very inconvenient. Someone pls help!

    You can configure that in your Operating System.  In my version of Windows XP, open any folder and  select TOOLS/FOLDER OPTIONS/FILE TYPES then scroll to the asp file type and select DW as the editor.

  • Can't find a valid editor for this file extension

    When I try to open access from within Dreamweaver I get this
    error message.
    Can't find a valid extension for this file extension
    I have MSACCESS showing in Edit > Preferences > File
    Types Editors
    Many Thanks for any help
    John

    Support for ColdFusion and other databases were removed from DWCC. You can add them back with the Legacy Extension, or adding a paid extension from DMX Zone...
    About 1/2 way down this page for the legacy extension: http://blogs.adobe.com/dreamweaver/
    It's a paid extension, but adds back a lot of the things that were removed...
    http://www.dmxzone.com/go/22072/dmxzone-database-connector-php

  • Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.

    also say explorer not reading SWF files and I have to reload them? Not sure what that is either,
    Thanks
    Jim

    Hi Nancy
    Trying to update my site got to make some changes.  Do you work on sites via remote? I am on Cloud.
    : Nancy O. 
    Sent: Monday, September 01, 2014 3:47 PM
    To: James Neidner
    Subject:  Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
    Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
    created by Nancy O. <https://forums.adobe.com/people/Nancy+O.>  in Dreamweaver support forum - View the full discussion <https://forums.adobe.com/message/6692200#6692200>

  • I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

    I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
    Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
    FROM: Terry Weber, Email: [email protected]

    https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

  • Receiver categ. PSG is not allowed by settlement prof. SD_ROS for this sender-message no KD031.

    Hi Friends,
    I am facing error message "Receiver categ. PSG is not allowed by settlement prof. SD_ROS for this sender Message no. KD031" at the time of creating sales order once entered material code.
    I have also searched the same through SCN and found lots of helpful responses, but my question is how this Settlement Profile is getting determined at the time of creating sales order?
    Thanks,
    Pratik

    Hi
    Go to OKO6 or OKO7... Change your settlement profile PP01
    However, I recommend not to change PP01.. Make a copy of PP01 and assign it your Prod order... Allow Order item in the settlement Profile
    br, Ajay M

  • I'm installing PS CS5 Exteneded on my new laptop. I get an error saying the serial number is not valid for this product. Help!

    I'm installing PS CS5 Exteneded on my new laptop. I get an error saying the serial number is not valid for this product. Help!

    If you purchased it from Adobe, it is registered and that would prove ownership as well as the emaill they sent with the serial number.
    https://www.adobe.com/account/my-products-services.html#MyProductsHeader
    Sign in with the email and password that you bought it under.
    Click on the triangle next to your product and you will see the serial number assigned to you.
    You have a valid record and proof of ownership. Try again.
    Gene

  • FrameMaker 9: Licencing for this product has expired

    A few weeks ago, I installed a licenced copy of Technical Communication Suite v2, but did not really get the chance to try it out properly at the time.
    Upon launching it yesterday, instead of the application launching, I just got a dialog box:
    "Licencing for this product has expired"
    Does anybody know how I can rectify this?
    Thanks,
    Jon

    Jon/Mike,
    If you had any of the beta versions installed, then this will mess
    with subsequent new installs if you didn't deactivate and remove the
    serial number before it expired. To kick start it back to live with
    the appropriate new serial number you can try these steps. Note: you
    don't necessarily need to uninstall and re-install the suite.
    1. Roll back your system clock to a point when the beta/prior version
    was working.
    2. Open up either FM/Robo/Captivate and select the "Deactivate..."
    under the Help menu.
    3. You will be prompted if you're sure and want to deactivate the
    whole TCS, etc. One important option here is that you can remove the
    serial number upon deactivation. You need to do this!
    4. Once deactivated and the serial number is removed, reset your
    system date back to normal.
    5. Finally start up any of the three main apps and you'll be prompted
    with the EULA that you have to agree to and then will be asked to
    enter the proper serial number.
    I hope this helps in your situation.
    Been there, done that... ;-)

  • Not a valid location for this request

    Having set up the iCal server based on Apple's instructions, I find:
    Enabling calendaring for a user in WGM does not stick, at least according to the dialog.
    When I try to publish a calendar for user 'hansen', I get the following:
    http://[email protected]/calendars/users/Test.ics is not a valid location for this request.
    What gives?
    Thanks.

    Thank you, Harry.
    The non-sticking indication is the result of an error in your setup. DNS should be correct to allow the calendar server to find your server at www2.rc.org
    I have no problem finding the server via a web browser.
    Additionally, iCal server should have your server entered in its setup panel on port 8008 or 8443 depending on the use of nonSSL or SSL. Ensure the correct port is open.
    8008 is open. I can also see the /calendar data by logging on via a web browser.
    And lastly your OD master LDAP directory needs to be up and running at 127.0.0.1.
    So your user can be assigned within the LDAP directory and not the local directory containing server assignments.
    You got me here. Now, I tried to enable the OD service and set up the server as a master. But I can't change the user to using OD - I get an error.
    Looking in the OD General settings, I notice that the inverse DNS has given it the the host name list.rc.org, which is another name for the same server. Could that be a problem? I need list.rc.org to be available.
    I just started this server (moved from 10.4), so it's not like I've had chance to mess up much. The accounts I'm trying to use for iCal are new accounts, not imported from 10.4.

  • I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.

    I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.

    Hello vinay34,
    If you are having issues with activating your Apple ID for FaceTime and iMessage, then take a look at the article below to get it sorted out. Make sure that you have the Date and Time set to Automatic as well as any other steps listed in the article. 
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/en-us/ts4268
    Regards,
    -Norm G. 

  • Twice I have tried to buy this software and been refused. Can you please find me a valid reason for this

    Twice my request to but an upgrade to export psd has been refused. As I already have bought in the past this is very strange and annoying. It also means that the work that I have in hand cannot proceed. Can you give me a valid reason for this?

    Hi dcg41,
    There was a service outage yesterday that may have affected your purchase: Adobe Service Outage Update | Adobe Customer Care Team
    However, if the error is persisting today, please double-check the credit card information that you're entering, including the expiration data and CCV. If all that checks out, I would encourage you to contact Adobe Customer Support to resolve this issue. Here is the contact information: http://helpx.adobe.com/contact.html?product=acrobat-com&topic=signing-in-to-or-managing-my -account#
    Please let us know how it goes.
    Best,
    Sara

Maybe you are looking for

  • Premiere Elements 11 won't launch

    G'day, I downloaded the trial version of PRE11 a few weeks ago, but I couldn't get it to run. Upon launch I get the welcome screen with two choices, to launch the Organizer or the Video Editor, but neither of these actually start. It seems as it is t

  • Question about utl_file_dir

    Dear, i have 2 node apps EBS R12 12.0.5 node1 = app tier node2 = db tier show parameter for utl_file_dir i could see 2 locations /usr/tmp and ....... the job OAM Applications Dashboard Collection.most of the time is fine, sometime it shown completed

  • Print Layout Problem

    hello all, im wrongly posted this in SDK, im reposting it here. thanks. i made a UDF Invoice Number(BP invoice #) in Marketing doscuments in the document Header and i want to print this Invoice Number in the outgoint payments.my problem is i cant fet

  • How to develop complib using NetBeans IDE?

    Anyone has done this? I don't know which project type I should use. Thanks.

  • Sync Log

    I've set my Itunes 10.1 to sync one my photo folder Into this folder there are 158 files .jpg When i click sync button, itunes work for 1 minute and does'nt show any errors but on my Iphone 4 there are'nt new pic files ! Itunes save a log file to und