Still no video in 5.2 - and more
O.K., I unistalled LR 5.2, deleted the preferences file. Restarted the computer. Installed LR 5.2. Restarted the computer. Still I am not able to import video's.
Win dows7 64bits.
I have done this trying to "Synchronize filder" with one rgat had been imported before in 4.1 but now woné show the movie files anymore.
So I tried it with a new one, containing a picture and a very small MOV (17270 KB) and now it takes forever ro import the picture.
So LR seems to be very busy importing the movie file (2 minutes) but just can't.
I would like to here from some Adobe employee what they are planning to do about this.
And for their interest: it took uninstalling and reinstalling PS CC too after the last update.
So Adobe: what is wrong with your updates? It all was without problems before CC came along (and the hackers followed).
Knowing that this forum is used mostly by volunteers I first would like to say that I appreciate their work.
My message was meant to trigger someone from Adobe too.
You are right, the previous version was 5.0. That is the one I have installed now. I posted a message about being unable to work with video in this thread: http://forums.adobe.com/message/5734831#5734831
The update from Photoshop CC also was a faillure: http://forums.adobe.com/thread/1304900 and http://forums.adobe.com/thread/1298023
In the meantime I'm working with the "old" version of LR and still believe things went wrong since CC came out - the latest LR may be the same as the CC version.
I have the "stand-alone" LR and a One App Photoshop CC.
Similar Messages
-
Possible to recover video after stupidly syncing and thus loosing backup file? :'-(
I have been so stupid.
My daughter of 3 managed to push 3 buttons on my ipad2 in the exact sequence needed to delete a most wonderfull video. In a panic, I ran to my imac and connected my ipad not realising that by doing so, it was syncing /backing up with itunes.
In each case, the iOS recovery tool of Dr Fone is not able to see anything except for the videos that are still on the ipad ...
And on the mac I can only find back one itunes file
So my questions are:
1) are these itunes backup files completely overwritten or is a new file made but the old copiy still somewhere on the mac yet made invisible?
2) does the syncing process overwrite the 'empty space' on my ipad (where the deleted video must be) and is this the reason that the dr Fone software can not retrieve my video?
3) is there any other tool out there more powerful out there to retrieve deleted files that have been deleted? like some forensics tools?
Thank you so so much in advance,iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Cheers, Tom -
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually. It gets weirder:
When looking at the empty screen with the name of my former playlist on top, if I tap the edit button on the phone, tap the + button to add a 'song' to the playlist, and then tap 'Done' without adding anything, I can see all my videos in the playlist with the red minus symbol next to each of them. But as soon as I tap 'Done' again they all disappear!
I saw on another forum that someone has had the same problem but fixed it by, and I quote
"If you go to Get Info and change the Media Kind from Movie to Music Video under the Options tab, they all now appear in the playlists!"
I'm happy this worked for him, but when I tap "File" in itunes, the "Get info" field is greyed out, so I can't test the solution proposed.
Any ideas?
ThanksSame problem on my ipad 2...but it works well on my iphone 4s.
Can somebody help me?
Thank you -
Crashes, graphics glitches, and more crashes when editing video clips
Can't for the life of me figure out why PE keeps crashing on me, so I'm here for help.
My system consists of a i7-970 hexacore, 6GB ram, 1x 500GB os drive, 3x500gb raid 0 drives (this is where my video clips are stored), 2x GeForce GTX460 video cards.
OS is Windows 7 Profressional 64 bit.
The video files I work with are generally in the 50-200GB size.
A little background - the videos that I am working with are recordings from Battlefield Bad Company 2 that I have recorded with some capture software called Dxtory.
I record at 1920x1080 at 60 FPS to avi files. The avi files are using the "xtor" codec (Dxtory's own codec)
[ISFT] DxtoryCore ver2.0.0.101
[ISRC] Video:YUV420 Audio:Speakers (Realtek High Definition Audio)
Audio is PCM 192000Hz recorded in stereo.
Let me start by saying I have not had trouble with this before until I started recording the videos at 60 FPS. 30 FPS worked ok (some crashes here and there, but they were bearable), but the frequent crashes started happening when I started working with the 60 FPS videos, done mainly so I could play around with slowing the clips down, etc.
Sometimes I can open and edit clips just fine.
Recently, a project that I'm working on is crashing when I try putting two different clips from different files together on the time line. I managed to get it to work once, and saved the project after that. Then, PE crashed randomly and when trying to reopen the project, it just crashes and won't let me get any further.
I should mention the graphics glitches as well - occasionally (especially when previewing video clips before adding them to the timeline) after I close the preview window, the graphics in PE will glitch out, causing random lines to appear in certain areas, graphics to stack on top of eachother and freeze up, and sometimes I can click on the "play" button in the main project window and hear everything start playing, but the graphics are completely screwed up to the point where I can't view the video or hit the pause button.
All of my computer hardware is fine, all drivers, and PE, are up to date.
Can someone please help me figure out what is going on? I'll be happy to provide any more information that might help out.The most likely issue is the codec that your program is using the create your video. It's apparently not compatible with Premiere Elements.
This often happens also when people try to record their on-screen video with FRAPS.
You'll see lots of discussions on this issue in the Premiere Pro forum. However, it's even more pronounced in Premiere Elements, which is designed to work almost exclusively with camcorder video.
Some video programs are a little more versatile with this type of video. Some people have found Corell's Video Studio better at handling these non-traditonal formats.
But I did a Google search on Dxtory editing and couldn't find any information on it.
Sorry I can't offer a solution. But I can pretty much assure you that Premiere Elements isn't it. sorry. -
I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you
Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.
-
Can I disable plugin-container.exe in 20.0.1 and still stream video?
When I try to stream TV shows with Firefox, I receive high Firefox disc usage warnings from my Norton antivirus. I believe this is due to the gigantic plugin-container.exe that Firefox apparently runs the Flash player inside of. When I look at it in Taskmaster plugin-container has been using 150 k + after just a few minutes and continues to go higher the longer I watch. If I continue to watch without doing anything, eventually the video begins to stutter and then stops while the sound keeps playing. My system slows down to the point where it takes 5 min to stop the player after clicking the control, and a half hour for my system to process the commands to shut down Firefox and restart.
I've been able to work around this by putting the AV into extended Silent Mode to save CPU and by closing the browser after each and every episode, then reopening it again. Obviously this isn't an optimal solution.
I tried shutting down plugin-container using the Taskmaster but this also killed my video. When I closed the window and restarted the video, the plug-in-container came back. In this current version of Flash 20.0.1 is there a way to disable it forever that will also allow me to stream video? IE8 didn't play nice with web pages but Firefox isn't playing nice with video streaming. Is there a fix that doesn't involve a new PC?
Hard drive currently has 298 Gig free
5/10/2013, 18:06:35
Machine name: TIGERFLOWER
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.130307-0422)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dimension XPSGEN5
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A02
Processor: Intel(R) Pentium(R) D CPU 3.20GHz (2 CPUs)
Memory: 2046MB RAM
Page File: 460MB used, 3476MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)Thanks for the ideas and suggestions. We know the problem isn't with Flash because I was running it without huge background files or lock-up up while using IE8.
Installing an older version of Flash isn't an option because newer versions resolve some of the memory usage and flickering problem that older Flash versions caused on the new Hulu site. Some sites also require the newest patch and return an error message if an older version is detected.
I'm not sure what protected Flash mode does or doesn't do and hate to mess around with Flash when we already know it's been running without issues on my system using the other browser.
What I DO know is that the problem only started occurring when I made the switch from IE8 to Firefox. This weekend I had it happen again when I only had Firefox open and the Norton AV running out of Silent Mode in the background. Only the Flash thumbnails on the Hulu home page were active, not the Flash player and I started to get slowdown and lose mouse control.
I posted the issue over on the Norton forum also but don't expect a workaround. I think disabling that huge plugin-container file might help. By the time I've watched one video both Firefox and plug-in container are up around 200k each, much,much, much larger than anything else running on my system.
So is disabling plugin-containter still viable? Firefox crashing is never going to happen, if plug-in container freezes up my system first. Continually closing and reopening Firefox as a workaround doesn't seem to be way it was intended to perform. -
Recently when I try to play a video on Firefox I get the same message that I need to download the latest version of Adobe Flash Player. At least 5 times I have downloaded Adobe Flash Player 11 Active X and Adobe Flash Player Plugin 64 bit. Problem is that even though I have the latest version I still get the same message when I try to watch videos on Firefox. The frustrating thing is I can watch videos on Internet Explorer and Google Chrome as well as on Safari. How does that make sense?
Today, I upgraded to Firefox 10.0.2 (x86eng-us) hoping that would enable me to watch video on Firefox but it made no difference either. I would rather use Firefox as my default browser but if I can't get help so I can view video on it I will be forced to use another browser.Hi arpriltime,
Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
Hopefully this helps! -
Is there any good Linux software to show slideshows, videos and more?
Hi.
We are trying to replace windows and apple on all computers in our church. Now, I know we will most likely hang on to some of our macs for video editing purposes, but we have identified several computers that runs Windows that can easily use Linux.
We have come across one nut that we have yet to solve, and I would hope that someone would have some input on how to do this.
In the lobby, we have a windows computer hooked up to a tv. On the screen we are showing Slideshows with information on upcoming events, videos from meetings, twitter and also a list of all the Buses leaving from the nearby bus stop. The latter one is hooked to "Västtrafiks" (our local bus company) API, and update in real time.
All this is very easily done in WPF (Windows Presentation Foundation). Since there is no support in mono for this yet, we are looking to replace the application all together. However, we can't seem to find a suitable replacement. We have all been looking for a while, and we are starting to think that we may have to write our own program in Java.
Now, this would be a huge time sink, so I hope that some of you might have some insight about a software that could fulfill our needs.
The basic requirements are Image slideshow, background Music, Video slideshow, twitter feed, and perhaps rss feed integration. Now, the ability to show Västtrafiks time table would be neat, but I think we can hack that ourselves if we find a suitable open source solution for the rest.
I am going to try to get a video on what it looks like today, to get a better understanding about what it is.skottish wrote:
Before this thread drifts, the primary goal is here:
kveras wrote:In the lobby, we have a windows computer hooked up to a tv. On the screen we are showing Slideshows with information on upcoming events, videos from meetings, twitter and also a list of all the Buses leaving from the nearby bus stop. The latter one is hooked to "Västtrafiks" (our local bus company) API, and update in real time.
I have some questions: How is the formatting on this? I mean, is the slideshow, video(s), feeds and such all on screen at one time like an American cable newscast?
Yes, if I understand you correct.
A bit more information. Today we use a Dropbox folder to add media, like videos and images etc. After every loop that the software has made it stops to check if the folder has any new files. If it has, it automatically includes it in the feed, as well as deletes any media that has been removed from the folder. So everything is managed by uploading to the folder from anywhere, the box itself is headless and is only running this single output.
Today we only show the output on one single screen. But it may be interesting to do this over several screens in the future.
We could use openshot and manually edit the feed etc, but that takes away the ease of use. The idea is that anyone with something to say should be able to upload it without any tech skills. Right now, we are thinking about porting the functionality to Java, however I think that this would be at least 50 work hours to get it functional. -
I am trying to play some videos from the internet and I get the message "missing plug in". I click on the message and downlaod adobe flash player as prompted. When I log in again to play the videos, I still get the missing plug in message. Any suggestions??
that used to happen to me all the time! I would recommend going to a different sight or attempting to download it again ( you may have missed a step it can be tricky).
-
i converted my videos to mp4 but itunes still refuses to let it work and shows a winow that says "....... (item) an not be copied to itunes because it can not work on your ipad" although mp4 files are supposed to work on my ipad. i tranfered all music and pictures to itunes but i can't transefer my videos. What should i do?
Since I am impatient and can't wait for 90 minutes for an answer, I have decided to lose everything on my iPod and try to remember all the songs I had on them. But if anyone can help me prevent this in the future, that woud be great!
-
I have a iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it
Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem. -
I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."PHONE LOCKED
If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212 -
The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound. I updated software today. Still sound & video not working.
Please help.One of the following steps should help.
1. Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Web Content:
Click in the box for "Enable Plug-ins".
3. Check whether you are currently in YouTube HTML 5 trial.
http://www.youtube.com/html5
At the bottom left of the page uncheck the box for
"You are currently in the HTML5 trial".
4. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes next to all items.
Check the box next to "Remove all website data".
Click "Reset".
5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
Safari > Preferences > Extensions
Best.
Maybe you are looking for
-
Summary Report with 4 Dimensions and 5 Facts
Hello OBIEE Czars: I have a problem. I am trying to make a summary report with 4 Dimensions and 5 Facts. Out of that only 2 Dimensions are Confirmed. Now when I try to bring in all the facts, I get view display error. I searched forum for similar iss
-
Hi Experts, We are planning to upgrade our NW 7.2 system to NW 7.31, based on your various material I understand that PO is part of the NW components. Requirements are as below: 1> We need to trigger the BPM workflows when there is a status change in
-
How do I fix slight distortion in background in generating sine wave
I'm getting a slight distortion in the background when I run the following code, the distortion is very slight and sounds like buzzing. Because of its subtle nature it makes believe there is some sort of aliasing going on with the byte casting: Note:
-
Ant build script not working...
Hi! I'm having problems using Ant to build a WLI-application in a HP-UX production environment. I exported the Ant buildscripts in Weblogic Integration (in NT) and made minor adjustments which do not change classpaths or anything for the taskdefs use
-
Why can't I read this ZipFile?
hi, this code looks right to me, but it will not read anything. I have a zipfile, called 'cdtemp.001' which has only 1 zip entry, called 'cdtemp.x001', which i am trying to read some bytes from. Here is the code: byte temp[] = new byte