Still not fixed in CS6: Undo problem after Text Type + Move

I have noticed this very annoying Photoshop problem still has not been addressed by Adobe.
Breakdown:
Type text
Move text
If you undo the move, it will not only undo the move - but the text you typed as well
So technically it does 2 undos instead of just 1. Does this not irritate anybody else? It's so annoying.

Type text
Move text
If you undo the move, it will not only undo the move - but the text you typed as well
Between "Type Text" and "Move Text" are you clicking the Check Mark to commit text (or hitting Enter on numeric pad), then selecting the Move Tool to move the text?

Similar Messages

Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded. I just ran the update and it is still not fixed. What can I do???

Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded. I just ran the update and it is still not fixed. What can I do??? My plug are asking me to re-register them too. This is annoying. Please help!!!!!

How do you try to start the repair dialogue? By starting Aperture or by opening the Library?
If you not already have tried it with directly opening the library:
reveal your Aperture Library in the Finder
Whilst holding down Command(⌘)- option (⌥) double click on the Aperture Library.
Select "repair library" from the dialogue.
What about Frank Caggiano's questions above?
It would be really helpful to know, how many libraries you have, and if this problem is restricted to one of them.

Why iCal cancel of event edits issue is still not fixed after over 2 years?

Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
What would it take for Apple to start working on this issue?

Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
If you feel the same way, you should post a note here:
http://www.apple.com/feedback/ical.html
Message was edited by: SteveMc10123

Gmail archived/labeled Emails not showing problem FIX SOLUTION FOUND - BUT STILL NOT FIXED!

Newest edits in here:
http://forums.crackberry.com/general-blackberry-discussion-f2/please-send-very-important-10os-device...
100% FIX SOLUTION GUARANTEE for Gmail archived/labeled Emails not showing problem!
How to fix it? FIX "Show Read Filed Emails" button to respond to ON and OFF devices Blackberry HUB for Gmail accounts - NOW IT IS ALWAYS OFF if you press ON or OFF!
"Show Read Filed Emails" button ON and OFF for Gmail account works on Blackberry Blend desktop version!
Works with: Blackberry Blend desktop version responds to "Show Read Filed Emails" button ON AND OFF with Gmail accounts! (pressing "Show Read Filed Emails" button ON and OFF again and again, view in Blackberry Blend immediately changes in order you press ON or OFF, but Blackberry HUB is always on OFF)
Error/Bug: Blackberry HUB do not show Gmail labeled emails
Main problem: Blackberry HUB "Show Read Filed Emails" button doesn't respond to ON AND OFF and is always OFF fo Gmail account.
Main problem: ALL Blackberry 10OS devices Blackberry HUB"Show Read Filed Emails" button ON AND OFF doesnt respond with Gmail accounts!
"Show Read Filed Emails" button doesn't work with: Gmail accounts
Status: NOT FIXED!
OS version: Blackberry 10 OS version OFFICIAL 10.3.1.1565
PROBLEM FOUND!
I created new Gmail account send 5 test emails and made first 2 test emails labeled and made step by step set up on my Blackberry 10OS device to confirm this ''Show Read Filed Emails'' button BUG/PROBLEM/ERROR:
1. I signed in with my Blackberry 10OS device like this:
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338846d1425503380t-gmail-archived-lab...
2. When I set on Gmail account settings "Sync Timeframe" is set to FOREVER and "Sync All Emails Folders" is set to ON
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338847d1425503392t-gmail-archived-lab...
3. And at last I go to devices Blackberry HUB and see this:
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338856d1425505143t-gmail-archived-lab...
As you can see it doesn't matter if "Show Read Filed Emails" button is set to ON or OFF, Blackberry HUB doesnt respond at all, but Blackberry Blend view changes at same second then I press.
CONCLUSION: "Show Read Filed Emails" button ON and OFF BUG/PROBLEM/ERROR for Gmail accounts is confirmed and it STILL NOT FIXED!
Please spread the word to people who have all the power to influence and accelerate processes to FIX this VERY SERIOUS ISSUE or please tell me there could I send this FIX SOLUTION to to get fastest respond and get it FIXED ASAP. THANK YOU!
STILL NO FIX!

If you select one month for mail days to sync, only one month's worth will be synced and available - the last month which will be constantly changing to the most recent 30 days. Select No Limit for Mail Days to Sync.
Show 1000 recent messages is for the selected mailbox only and if there are more than 1000 messages in a mailbox and you have one month for mail days to sync selected, if the last 30 days for the mailbox includes 100 messages, only 100 messages will be available.
Are these additional server stored mailboxes separate mailboxes and what I mean by that is not sub-mailboxes for the Inbox mailbox?
Since you have had this issue with other operating systems, the common denominator is your Hotmail account. Have you contacted Hotmail technical support regarding this issue you have had with other operating systems?
All server stored mailboxes with an Exchange account should be available with the email client used to access the account. If all are not available when accessing the account as an Exchange account with an email client, something is wrong with your setup for these mailboxes at the server level.

3.1EA2 bug still not fixed - Members of package body not listed in the tree

Hi, I was working today with SQL Developer again and found that this bug is still not fixed even when it was reported more than 1 year ago!!!
I did a quick search and found it here
Package Body Tree not always showing
The problem is when you expand the package specification or package body tree, not all members of the specification/body are listed. This is mostly observable in the package body, but it regards to the specification as well.
Consider this case:
CREATE TABLE EMP (
    ID               NUMBER(6,0) DEFAULT 0,
    NAME             VARCHAR2(20 BYTE) DEFAULT NULL,
    DEPT             VARCHAR2(20 BYTE) DEFAULT NULL,
    FUNCTION         VARCHAR2(20 BYTE),
    PROCEDURE        VARCHAR2(20 BYTE));
CREATE TABLE LOOP (
AREA    VARCHAR2(5),
VALUE   VARCHAR2(2));
CREATE OR REPLACE PACKAGE Test_Package1 AS
gvc_const CONSTANT VARCHAR2(10) := 'xxx';
PROCEDURE Test(p_RC OUT NUMBER,
               p_ID IN NUMBER);
END Test_Package1;
CREATE OR REPLACE PACKAGE BODY Test_Package1 AS
PROCEDURE Test(p_RC OUT NUMBER,
               p_ID IN NUMBER)
IS
BEGIN
--INSERT INTO EMP (ID, NAME, DEPT, PROCEDURE) VALUES (1, 'Tina', 'xxx', 'xxx');
--INSERT INTO EMP (ID, NAME, DEPT, FUNCTION) VALUES (2, 'Jeff', 'xxx', 'xxx');
--INSERT INTO LOOP(AREA, VALUE) VALUES('a','b');
NULL;
END;
END Test_Package1;Compile the package specification and the body. Expand the spec + body in the tree. Uncomment any of the commented lines in the package body and compile the body again. Now expand the package body again and look what is displayed.
Why? It is because SQL Developer handles words "Function", "Procedure" and "Loop" as keywords and according to them does the parsing.
Another case
CREATE OR REPLACE PACKAGE Test_Package1 AS
gvc_const CONSTANT VARCHAR2(10) := 'xxx';
TYPE Loop_rec IS RECORD(
item1   LOOP.AREA%TYPE);
PROCEDURE Test(p_RC OUT NUMBER,
               p_ID IN NUMBER);
END Test_Package1;Compile just this specification and try to expand it in the tree. Again, during parsing the package, SQL Developer takes the word "LOOP" into consideration and fails to parse the specification.
There is exactly the same problem when you declare functions from external dll libraries in package body. Since there is no "END;" in this case, SQL Developer's parser fails...
To me it seems you simply blindly took some keywords like "FUNCTION" and expect there will be some "END;" keyword corresponding with it.
Can anyone have a look at this and finally fix it?

Hi,
Thanks for trying out SQL Developer 3.1 EA2 and providing a clear, reproducible test case for this issue. I logged an internal bug for it:
Bug 13438696 - 3.1EA2: FORUM: CERTAIN KEYWORDS IN PKG BODY BLOCK MEMBERS FROM CONN VIEW TREE
It seems the bug noted in the other forum thread you reference has been fixed, but really had nothing to do with problems discussed either here or there. That fix involved adding an Edit Body... item to the Package context menu in the Schema Browser, not displaying Package members correctly in the Connection view tree.
Regards,
Gary
SQL Developer Team

Latest Lenovo Update (B6000_A442_001_020_140620_WW_WIFI ) DOES NOT FIX 4.4.2 problems

Ok so I muddled my way through installing B6000_A442_001_020_140620_WW_WIFI on my Yoga 8 and can report that it fixes none of the 4.4.2 issues reported.
-Volume rocker still upside down in one oritentation
-Performance is still crappy
-NETFLIX is still corrupt
etc...
Hopefully Lenovo fixes these issues before they decide to OTA an update to us.

Even B6000_A442_001_021_140703_WW_WIFI does not fix visible errors.
Google music and google movie works with small stuck or crunch sound every 20-40 seconds. Especialy music performance is poor.
Google maps crashes. Street view is death.
Volume rocker does not switch orientation.
Lenovo guys fix it please asap. Those problems make yoga tablet very bad piece of hw.
Thanks.

OS 4.1 on iPhone 4 still doesnt fix the proximity sensor problem! and now?

Dear Apple
iPhone 4 ***** !!! 4.1 still doesnt fix the prox.sensor problems and every 2nd call or so is interrupted by this problem, how do fix it an what should I do now and what are you doing to fix it ????

We are iphone users like you.
As provided, you are not addressing Apple here.
The iphone has a one year warranty. If yours is defective then Apple replace.
Contact Apple to arrange for this.

HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.

my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.
Any Suggestions?

Restart the computer.

IPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1

iPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1
No bug in Chrome or other third party browsers.
When are Apple going to fix this bug? It's painful.
more info here:
http://stackoverflow.com/questions/19012135/ios-7-ipad-safari-landscape-innerhei ght-outerheight-layout-issue

Tell Apple not other users.
Use http://www.apple.com/feedback/ipad.html

Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade

Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade ?

...And google says:
Tethered camera support in Lightroom

My iPad air won't charge at all and I don't know if it's the charger or port help!i have had a new port put in before and it worked fine after but it's not working now! I have spent way to much trying to fix this thing one problem after another?

My iPad air won't change at all, and I don't know if it's the port or charger cable it is charging normally but it just won't charge. I have had a new port put in before after a charger getting stuck in there but it worked fine after and now it's not working at all! I don't know if maybe it's the charger getting old but I have spent far too much money on this iPad then I should have as it's one problem after another witch is causing me lots of stress.

Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall.

IPhone 1.1.3 does not fix my iCal sync problems

Still having my wonderful iCal sync problems.
Got the old "iTunes could not sync calendars to the iPhone "name" because an error occured while merging data".
Gettin' kinda old after at least a month.
I've tried every suggestion in this group besides generating a new Admin account.

... wait a sec... oh wait a sec....
I just may have fixed my problem. Deleted <user>/Library/Calendar (Leopard calendar) and <user>/Library/Application Support/iCal (Tiger calendar) and then deleted all data and settings on my iPhone and I can finally sync a darn calendar without iTunes complaining.
Was even able to re-import one of my calendars and have it show up in...wait for it... BOTH places. OMG - welcome to the 21st century!
Even got rid of duplicate birthday calendars my iPhone had been building up!
Joy to the world! Woot Woot.

Verizon ellipsys update did not fix the app memory problem!

The Verizon update for the ellipsys did not fix the original issue with the storage of apps on the device. The update gave you the capability to move apps to your tablet space; but, the device's pre installed apps cannot be moved. Those apps take up roughly 500mb of the allotted 1gb of space.
This tablet was meant for my parents to use and they can't be sitting here umistalling and disabling preinstalled apps just to use there tablet.
Please include in the next update a reallocation of memory for more app storage space. I have already moved all available apps over to the tablet space: I have 4 gigs open on their tablet and only 200mb for apps? Crazy sauce...

I called Verizon 2nd level tech support and they assured me there is NO ED06 update's said they haven't even finished rolling out ED05 yet. I think they just told you that to get you off the phone. I also have a Fascinate and have had problems and can't get them to replace my phone with a different device. I want the Droid Charge since it is the only other one that has the AMOLED screen that I originally chose the Fascinate for . They had a program that ended on July 28th the day that ED05 rolled out. They offered the Droidx, the Incredible 2, and the Droid Charge to replace the Fascinates that were having trouble. I had called to report my issues during this replacement program but was not told that it was going on and now they won't give me the Droid Charge because it has expired. I think since there are STILL issues-they need to bring this program back and allow us to get a different phone. I have been a customer of Verizon for 10 years and have 7 lines so I am REALLY disappointed that they can't work with me (or other customers ) especially since it is not something we did to the phone. It is a problem with either Verizon or Samsung. I don't know where to go from here but maybe if they hear enough from others that didn't have any success with ED05 they will start to replace them. I will probably go to a higher level to voice my concern. Let me know if anyone has any success getting a new device especially the Droid Charge.

Still no fix for aspect ratio problems

I was hoping this new version would fix the aspect ratio problems with importing clips other than in the DV codec, but alas, it was not to be.
My problem is that if I import a clip that is 720x486 (non-square pixels, uncompressed), iDVD doesn't interpret it correctly. It places the clip with small black bars (like a little letterbox) at the top and bottom of the screen, then scrunches the image vertically, sprinkling it with stairstep artifacts.
What's frustrating is that versions up to iDVD 4 didn't have this problem and imported clips in any codec beautifully. It's been a known issue for a long time.
Furthermore, Apple's solution is to convert the clip to a self-contained DV movie (hello, disk space!), which is also undesirable because of the quality loss and poor colour compression. After the latest QuickTime upgrade, exporting in DV doesn't work, creating a clip that is half-field and blocky.
Argh! This is a real problem because many of us use iDVD to make screeners for clients, and it looks unprofessional. It's also a very inaccurate and somewhat useless tool when the clips are of clean lines, titles, and smooth, solid graphics, which show the stairstep effect the most.
I'm at my wit's end having exhausted all other suggested solutions (and please don't tell me to use DVD Studio Pro instead). Anyone else come up with a fix or have the same issue?
Previous discussion on this issue here: http://discussions.apple.com/thread.jspa?threadID=204675&tstart=0

Sorry, but the answer is - for professional use, use
DVD SP
No, it is absolutely not the answer. EVERYONE I know in my circle of professionals uses iDVD for banging-out quick screeners of TV spots, film clips, dailies. In fact, it's one of the main reasons they added OneStep to iDVD. DVD Studio Pro is for authoring commercial-level DVDs, with a learning curve and pricing structure appropriate to that.
I'm not going to spend time learning DVD Studio Pro just to do quick one-offs, for one, and it's overkill anyway. Not only that, but it costs a lot more than iDVD.
The inablity to import a QuickTime clip -- on Apple software, no less -- is not cool, especially since it doesn't seem an excessive thing to ask (and it used to encode just fine). It's a very basic task considering everything else iDVD has been written to do, and crosscoding and re-encoding video is a basic functionality in QuickTime.
I'm not asking iDVD to prove the existence of dark matter in the universe; I'm just asking it to play a QuickTime movie properly. Which is what it's supposed to do.
There was a work-around, supplied by Apple, but it no longer works for me, so that's why I'm asking what worked for others.

Has anyone found a solution for fixing the dvd reading problems after installing snow leopard?

I installed snow leopard on my macpro tower and my dvd player will not read dvds. My archived dvd all come up blank but on my laptop their fine. All my other dvds are just spit out. I have seen hundreds of post about this in the forums but I haven't come across a solution. Apple told me they have never come across this issue which is disturbing to say the least.

Leroydouglas
Thanks, I did see that thread and way too many others like it. My drive was working fine up to the minute I installed snow leopard and now I can't read all my archived dvds of the last 5 years of my work. Nor will it read the training dvd "New" that I just bought. It also won't even read the iwork disc that came with snow leopard. Of course all these disc work fine on my other make that didn't get the snow leopard upgrade. Apple support told me they never heard of anything like this. I took it to the apple store and they think it the dvd drive itself. Please, it plays cds fine and accepts new dvd media...some. Countless people have had their drives go out right after the snow leopard install.
I'm sorry but what happens to a dvd player or what hardware problem happens to only allow a player to read a few dvds but all cds. Could someone explain to me what breaks. Apple saying I need to by a new dvd player from them is crazy. Why do I get the feeling that if I install snow leopard on my other machine that the dvd player will also break. How also can apple not have any record of this happening to others.
I work with windows machines and linux boxes and Macs and I'm sorry I trusted an upgrade to a mac os that has been around for a while. If I would have checked the forums the way I do with anything I work with I guarantee I would not have upgrade to snow leopard after seeing all the people out their with this issue. It is also shameful that apple says it has no knowledge of this problem.

Still not fixed in CS6: Undo problem after Text Type + Move

Similar Messages

Maybe you are looking for