Still not possible (4.0 EA3) to copy displayed column headings from ref cursor output.

Hi,
I've created an enhancement request to allow displayed column headings from ref_cursor output to be copied.
This is still not possible (4.0 EA3)
The ref cursor data can be copied, but not the headings..
See July 2012 discussion of problem in comments at
http://www.thatjeffsmith.com/archive/2011/12/sql-developer-tip-viewing-refcursor-output/

Hi,
I think you're out of luck... except if you're on 11g where you can use DBMS_SQL.TO_CURSOR_NUMBER to convert the REF CURSOR to a DBMS_SQL cursor, and then benefit from the DBMS_SQL package to get column details.
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_sql.htm#CHDJDGDG

Similar Messages

HT4743 Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it have been aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..

Hi,
Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it's aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..
Thanks,
Rennuss

Ask the content provider.

Recovery still not possible after 6760 attempts due to ORABPEL-11001

Version 10.1.3.1.0
Hi,
We have two BPELs which keep filling up the domain log with the line in the heading:
Recovery still not possible after 6760 attempts due to ORABPEL-11001...
I believe we have fixed any possible input directory issues but the error message continues to be written.
I expect that redeploying (rebooting server?) should end the messages but, either way:
Do you know if there is a setting on either the BPEL development process (jDev) or the SOA server where I can limit the number of attempts?
Thank you,
AG
Log lines below:
~~~~~~~~~~~~~~~
<2008-09-24 07:24:51,486> <INFO> <usareg.collaxa.cube.activation> <File Adapter:
:Inbound> Recovery still not possible after 6760 attempts due to ORABPEL-11001
Invalid Input Directory.
The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "${Such-and-Such_A.input.dir}"
Ensure that the following conditions are satisfied for the input directory :
1) It exists and is a directory (not a file). and
2) It is readable (file read permissions). and
3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and
4) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.
<2008-09-24 07:25:11,485> <INFO> <usareg.collaxa.cube.activation> <File Adapter:
:Inbound> Recovery still not possible after 3480 attempts due to ORABPEL-11001
Invalid Input Directory.
The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "${Such-and-such_B.input.dir}"
Ensure that the following conditions are satisfied for the input directory :
1) It exists and is a directory (not a file). and
2) It is readable (file read permissions). and
3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and

We are running on Unix.
The BPELs were deployed before the respective in-/output directories had been created. I think this might have caused the initial problem.
Once the directories were created (with full permissions -777), though, the messages continued.
I checked the descriptors on the deployed bpels and they seem to be pointing to the correct absolute path for the input files.
So, ASSUMING that the paths are now correct and permissions are ok:
Is there any way of making the attempts stop (as in "kill -9 annoying_bpel_process" ;) ?, or,
Is there a setting in the server admin side to limit the number of attempts in the future ?, or,
Do we need to redeploy the same Bpel after we created the directories ?
Thank you for your help.

I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?

I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?
This is highly important. I know the number from which the voicemail arrived, but have not been able to figure out how to retrieve it. I accidentally had the voicemail in the Deleted Messages folder, and then Cleared this folder. If there is any possible way I might be able to retrieve this message, even if there is a cost associated with it, please help me.
Thank you.

I think you maybe able to restore from backup if that voicemail was included in the backup. http://support.apple.com/kb/HT1766

[JS] Simple question: Is importing XML from variable of XML datatype still not possible?

Hi,
Am I correct assuming that there is still no way to import XML into an XML element, directly from a variable of data-type XML?
Will I still need to save data to disk, just to be able get it into the XML structure?
Thanks,
Andreas

I totally agree. I look for this improvement once in a while, when I do changes and improvements in my code. I hoped I just hadn't noticed some other way to do it "in memory". It seems very unnecessary with this disk access.
I filed a feature request at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.
Perhaps more people wish for the same... and evntually the XML import functions will be able to handle an XML datatype object as argument.
Best regards,
Andreas

LMS 4.2.2 DFM still not possible to disable Duplicate IP false positives?

I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!

I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!

Cannot delete e-mail account on iphone, profiles were deleted but still not possible to delete account

I am not able to delete e-mail accounts on my iphone. I deleted the profiles but I still cannot delete the account. In settings-general the profiles are not there anymore.

and I was able to delete the profiles successfully, but I still can't delete the account. I'll have to go to the store tomorrow. Thanks for your help.

Subtitles, still not possible? Workflow suggestions please.

Hi all,
I have a client who wants to have (burned in) subtitles under an excisting piece of video.
I was thinking "He... No problem in PPro", but to my surprise this isn't really possible. I've been searching the web, and besides the same question going back to !!2006!! there's no real solution.
The only suggestions I found are about doing this in Encore. But the problem there is that Encore cannot export to .mp4 or Flash video. Or export the video and have the subs burned in for convenience sake.
I could treat all subs as titles in PPro, but this would take a lot longer. I cannot understand this basic functionality isn't available for PPro.
We don't all have Encore installed just for the sake of adding subtitles to a video.
If anyone has a good workflow for stuff like this, I really like to hear it. Preferably without resorting to installing all kinds of exotic apps and weird file shuffles.
Thanks!!
Rob

OE = PEBKAC I guess.......
I'll ask the admin to install Encore as well, as it might be handy to have installed next to PPro. Didin't know it comes bundled with it. Never had the need for it...
In the meantime I found an interesting script for AE called "pt_ImportSubTitles", that will import a Encore subs .txt file with all the timecode intact. From there you can go back to into PPro and import the AE comp as overlay on the videotrack.
Still a bit cumbersome, but workable for now and a lot faster than adding it one by one in PPro. Also the subs are still editable in AE, so it's a bit more fluid while working with it.
It would be very handy to have something similar in a future version of PPro, as subs don't always have to be on a DVD only.
rob

I am not able to delete a backup copy of iphoto library from my external hard drive.

I want to delete a copy of my iphoto library from an external hard drive. This drive is connected via my Apple extreme router. I drag the file to the trash but it just runs and does not seem to delete anything. 39 GB file. It is an older file and I want to clear up space on my external drive.

I figured it out just now.
I unplugged the drive from Airport Extreme and connected directly to the Imac via usb. Dragged the file to the trash and now it is gone.

Field Catalog not display column headings?

Hi All,
I have this type declared and I have created a table of this type
TYPES:
     BEGIN OF ts_vip_display_sort,
       orgeh         TYPE orgeh,
       org_txt       TYPE string,
       org_chief_txt TYPE string,
       vip_amount    TYPE p LENGTH 10 DECIMALS 2,
       vip_payout    TYPE p LENGTH 10 DECIMALS 2,
       vip_diff      TYPE p LENGTH 10 DECIMALS 2,
       seqnr         TYPE sseqnr,
       vcount        TYPE vcount,
       level         TYPE slevel_d,
     END OF ts_vip_display_sort.
I have specified each of the values I want to display on the screen but they are not showing up
CLEAR et_fieldcatalog[].
"org unit
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ORGEH'.
ls_fieldcatalog-coltext    = text-d01.
ls_fieldcatalog-seltext    = text-d01.
ls_fieldcatalog-scrtext_m = text-d01.
ls_fieldcatalog-colddictxt = 'R'.
ls_fieldcatalog-col_pos    = 1.
APPEND ls_fieldcatalog TO et_fieldcatalog.
Function to display:
   CALL METHOD gr_alv_tree_control->set_table_for_first_display
      EXPORTING
        is_variant           = gs_variant
        i_save               = 'A'
        i_default            = 'X'
        is_hierarchy_header = gs_hierarchy_header
        it_list_commentary   = gt_list_commentary
        it_toolbar_excluding = gt_toolbar_excluding
      CHANGING
        it_outtab            = gt_display_tab
        it_fieldcatalog      = gt_fieldcatalog.

I am sure you already [read this |http://help.sap.com/saphelp_46b/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm] and the deceleration of the internal tables are correct.
in bebug mode... verify if the gt_field* is holding the values.

Travel Expense: Error: Travel Exp already exist not possible to switch schema

Dear Team,
I am supporting Travel Management in one reputed company.
User facing one issue where TRF raised by copying one old TRF, during that time Travel expense report also getting copied. It is not giving any error while raising TRF in this process, but when the user trying to raise TER for the same he is geeing error: 'Travel Expenses already exist not possible to switch schema' Kindly suggest how can I stop this. Attached is the ESS Screen.
Regards,
Adi.

Hi Adi,
no. Leave that as it is. I wasn't entirely sure whether the field's value influences the TER in any way. But since it is = 1 and your TER schema collides, this is completely irrelevant. Still good to have this ruled out.
Have you checked what I wrote concerning FITVFELD_WEB? There's a checkbox in the schema "Overlapping Trips allowed" (loosely translated from German, might not be verbatim). If it's not checked, check it and retry.
Again though: 4 years ago, as I already stated in my earlier posts, these settings had no impact on the collision of Travel Expense Claims and coexisting TERs in the same time were not possible. I assume it is still not possible, so we're clutching at straws here.
However. If I understood your business needs correctly, you actually do not want the expense report data/indicators to be taken into account, because you just need the copy for the Travel Request, right? There might be chances for implicit enhancements and "killing" that bit information from the copied TE-Cluster entry so it doesn't stray into the copy of the Travel Request Copy anymore.
Cheers, Lukas

Federation merge still not available?

Is it still not possible to perform a merge operation which merges the content of two SQL Azure federations?
Considering that SQL Azure does not support cross-database SELECT/INSERT's, it almost sounds like I would need to retrieve all data from one federation, store it in some persistent format in blob storage, perform a DROP operation to extend an existing federation
and then import the data back into SQL Azure.
Is this still the case?

I'm sorry that you're having issues with SQL Database Federations. Unfortunately we are in the process of deprecating Federations, in part based on customer feedback.
You can find more details on the deprecation plan at http://msdn.microsoft.com/en-us/library/azure/hh597452.aspx
Thanks Guy

Internet Accounts (Mail/Calendar) still not working with Google account

Half a year after the release of Mavericks, it's still not possible to use Apple Mail and Calendar with my Google account. There's always the same error message:
There was a problem setting up the account.
An unknown error occurred.
I don't understand why this problem couldn't be fixed yet.

I have the same setup and it works just fine.
Reboot into Safe Mode and try again. Post back with the result.

Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

Hi,
I have tried installing "Dell Wireless 1701
802.11 b/g/n, Bluetooth v3.0+HS Driver "
But I saw neither wireless nor Bluetooth was defined.
As the drivers listed below are only the driver for wireless and bluetooth, I almost tried all of them, except the last three.
File TitleImportanceRelease DateVersionActions
Intel Centrino Wireless-N 1030 WiFi Driver
(Driver)
Other Formats
Description
Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
Intel Centrino Wireless-N 1030/Advanced-N 6230
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
Driver
(Driver)
Description
This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
Dell Wireless 1702 WiFi + Bluetooth Driver
(Driver)
s
Description
This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
Intel Centrino Wireless-N 1000, Centrino Advanced-N
6230, Centrino Wireless-N 1030, v.14.2.0.10, A01
(Driver)
Recommended
Description
This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
Intel Centrino Advanced-N 6230/Wireless-N 1030
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Add to My Download List
Dell Wireless WLAN 1502 Half Mini-Card Driver
(Driver)
Description
This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
Intel WiMax Link 6150 Driver
(Driver)
Description
This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
Ethernet Controller Driver
(Driver)
Description
This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
I had to install Dell Wireless 1702 WiFi +
Bluetooth Driver
The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
well, although there was a folder added in documents folder named 'Bluetooth Folder'
Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
still not working will.
The sceen shot shows the device manger before installing Dell
Wireless 1702 WiFi + Bluetooth Driver
These screen shots shows the device manger after installing Dell
Wireless 1702 WiFi + Bluetooth Driver
I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating program of this device is up to date. As this screenshot shows.
What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
Also, I have tried to install Intel
Centrino Wireless-N 1030 WiFi Driver
But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
means, is it because Dell Wireless 1702 WiFi +
Bluetooth Driver is being installed
Could you please take some of your preciout time out to read carefully my points below to finish this problem?
first:
Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
I don't have any other drviers which can do more than the what Dell
Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen). the bluetooth was added for both laptops as you see in these screenshots below:
The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
The Bluetooth devices of Mohammad's laptop whosse Bluetooh is defined well in device manager.
But there is still problem in the device managre as shown in the screenshot listed before.
Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
below), I can show what is inside it.
However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot:
Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below) However,
the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
But which driver should I reinstall because I have already installed the Dell
Wireless 1702 WiFi + Bluetooth Driver almost twice?
A man should convert his anger and sadness into strength to continue living in this life.

Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
Therefore, you are seeing the error.
If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
Balaji Kundalam
Thanks a lot,
I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
The Bluetooth is integrated with
the laptop, then where other services will come from, all service are related to Bluetooth.
If there are some additional services not related to Bluetooth,
then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
on the name of my laptop in the Device and printers.
Also, I really have installed a
BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
but when trying to install the same
BCBT7(Broadcom Bluetooth) on Dell, I faced the error below, although there is an icon for Bluetooth in
the system tray. Also, the Bluetooth is integrated as
you have seen in the device manager.
You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
Bluetooth is having some problems in the device manager.(First Screen shot below) However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
A man should convert his anger and sadness into strength to continue living in this life.

How can send emails over a eircom account i read some were this not possible is ther any fix for this as i am thinking of buying a ipad Air not much use if you can not send emails or answer them thanks

I believe you can only look a your emails if you have a eircom email account and you can not send or answer them with a eircom account if this is so can anybody tell me if there is a fix for this problem or would i better off just useing another email account that will work with ipad Reason i ask is i am just about to buy a ipad air and if this is not possible to use my email address to send emails from my ipad i would be better off with my laptop Thanks Napster

There are lot's of posts via a google search and it seems you certainly can set up your eircom account on your mailbox on iPad. Read this thread link:
https://discussions.apple.com/thread/4022610?tstart=0

Still not possible (4.0 EA3) to copy displayed column headings from ref cursor output.

Similar Messages

Maybe you are looking for