Still out here after 48 hours

-Northern California near San Francisco!  Can't imagine what the problem could be and why Apple is stonewalling!

Turn off  "Find My iPhone" in the settings. This helped me.

Similar Messages

  • ICloud calendar times out by one hour

    My iCal is fine, this is where I usually enter my info.
    iCloud is one hour behind, I have entered the correct time zone. It doesn't matter where I access my iCloud from it is still out by one hour.
    I did take some screenshotsof both calendars to demonstrate but the content was not 'allowed' to be uploaded, whatever that means. Any ideas

    this is the solution fromanother post
    Well, I finally figured it out myself.  It is not very intuitive.  By double-clicking on the account name in the upper right of the main iCloud window (in one's browser), one can change the time zone.  However, by itself that will not cause anything to appear differently.  Nor will telling iCloud to refresh the calendar.  It is necessary to logout of iCloud and then log back in.  That sets all events in the right time zone.

  • My iTunes won't force quit and says it's still syncing my iPhone after hours of syncing.

    My iTunes won't force quit and says it's still syncing my iPhone after hours of syncing. I had plugged in my iPhone 4S in the morning before I left for school, it synced almost completely, and then it got stuck on "Finishing Sync". I pulled my iPhone out because I had to leave to go to school, and iTunes is still stuck on "Finishing Sync". I tried force quitting and restarting but it's of no use. Now I can't use iTunes at all.

    Scratch that, I TRIED to shut down but I guess iTunes overrided it because it still thinks it's syncing

  • Can I still hang out here even if I get rid of my MSI nForce???

    After MSI's stellar performance on my RMA, I have an ABit NV7-133R on order from newegg. :D
    I just was wondering if you guys still want me to hang out here even though I'm giving the K7N415 board the boot out the door as soon as it gets back home.   8o
    Hehe... I miss the old forum.  :O
    SunnyD

    Before everyone keeps replying to this thread,
    Look at the date of SunnyD's Post!!!
    Quote
    2002 -07-13, 04:05
    He has been gone for over a year now!!!
    His last post in these forums was:
    Quote
    2002 -07-17, 08:16
    Richard

  • When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

    When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

    also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

  • After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

    After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • My daughter cannot remember her passcode for her iPhone 5. She needs a phone number that is stored in the phone and cannot remember her passcode. we have tried many groups of numbers and now we are locked out for an hour each time we put in the wrong pass

    My daughter is out of the country until May. She did not take her iPhone 5 with her. Now she needs a phone number that is stored
    in the memory and cannot remember her passcode. I have tried all of the possibities that she e-mailed , but none of them work
    and now I am locked out for an hour each time I enter an invalid passcode. Help? How can I get around this to access the phone?

    Follow the instructions at http://support.apple.com/kb/HT1212

  • HT201342 I'm still confuse  with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you

    I'm still confuse  with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you

    The iphone and ipad must be connected to the same icloud account.  Are you by chance using different IDs to connect from each device?

  • I have set up icloud for the first time on iphone 4 and its still says downloading after 12 hours.  Is this right?

    I have set up icloud for the first time on iphone 4 and its still says downloading after 12 hours.  Is this right?

    I think you may not using the right technical terms.  When backing up to icloud, there is no way you'd get a message saying things will be wiped.  This message may be displayed when you are performing a RESTORE from a backup and then trying to cancel it.
    If you are doing a restore, then you can reboot and restore again.

  • I have a iPhone 4 S 16 GB.  I cannot connect to my home Wi Fi.  I tried several of the things I saw out here and it's still not working.  It just keeps trying to connect over and over but never conencts.

    I have a iPhone 4 S 16 GB.  I cannot connect to my home Wi Fi.  I tried following some suggestions I saw out here but nothing helps.  It just keeps trying and trying to connect. 

    You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

  • A3.01 still keeps crashing here after ProKit update...

    I was keeping my fingers crossed, but in 64-bit mode A3.01 still keeps crashing after the ProKit update.
    Anyone with different experiences?
    Kjell Are Refsvik
    Norway

    What did the Genius Bar recommend?
    Almost every time I've run into freezes, they've been resolved by deleting preferences.
    If you're running 10.1.2 or higher, just hold down the option and command keys at launch.
    If an earlier version, I'd download and run Digital Rebellion's Preference Manager.
    Russ

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Need ANI details of calls landing during Out of business hours

    Hello All,
    Our Contact Center management has raised a new requirement to report with the ANI details of calls landing at any skill groups during put of business hours.
    Options that we have is
    1. Webview report - Call Type 22 and 23
    But in this, If we specify put of business timings and generate the report it will give the number of calls and not its ANI.
    2. Call detail report from our custom report application.
    Here the problem is, this report will give details of calls landing during business hours alone. The reason is that only the calls that utilizes VXML ports in CVP gets to this custom report. The calls coming in during of hours is handled at ICM level and to play the out of office hours prompt it utilizes CVP port not VXML and terminates the call.
    Is there any way to get this ANI details without having to modify this custom report much. Please assist in this. Let me know if you need any more details.

    That's pretty strange.
    Let's just see how you are doing this. Once you detect the out of hours situation in your Routing Script (either by checking a Global variable refreshed by an Admin script or by having a Time of Day node directly in the routing script), do you set a Call Type?
    Then after setting the call type, I assume you play a CVP message and Release the call. Correct?
    When you query the TCD on this call type you should only see your after hours calls. Let's look at one of the calls.
    You should see two rows in the TCD, one with the DNIS of your number on the gateway, or from the PSTN carrier, and one with the VRU transfer label (say 8111111111) - maybe that's in the DigitsDialed column, I'm not in front of an HDS database and can't check. This is all you should see for a call that comes out of hours.
    Both these legs should have the same RouterCallKey with different RouterCallKeySequenceNumbers.
    Do you see this?
    What is happening with another call at a similar time with a different RouterCallKey ? That doesn't make sense.
    Maybe you could do a query and show us the output?
    Regards,
    Geoff

  • When system is switch on(poweron) long beep and display is coming after hour

    hello sir
    when system is switch on(poweron) long beep and display is coming after hour
    This question was solved.
    View Solution.

    Hello @anandgopinainar,
    I am not quite sure what you are trying to say here. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    As well if you could please elaborate on what is going on so that I understand it would help as well.
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • When I sync with my iphone i get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage.  How do I turn this message off?.

    Question: 
    When I sync with my iphone I get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open.  This continues until I quit Entourage.  How do I turn this message off? It interferes with any other work I am doing.   I appreciate any suggestions.

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

Maybe you are looking for

  • Can we trigger a workflow from e-mail create event?

    Hi Experts, My scenario is very simple-Whenever a mail is send for approval to the approver,two workitems-Approve or Reject should be created in the Appover's inbox.On clicking on any one workitem, corresponding mail for approval/reject should be sen

  • Cannot view third party flash (windows 7)

    I've been trying to check the box to enable me to allow third party content but it will not check no matter what I do. I've seen people post about this before, but the other posts were from users with different operating systems. I'm running windows

  • Restore from disc

    i am trying to restore my i tunes library from back up discs but 2 of the discs say there is not enough memory and wont restore can anybody help please?

  • I brought iphone 6 for my brother but its not getting start

    i brought iphone 6 for my brother but its not getting start

  • How to turn many rows into one row with many coloums

    When I have a table for example NR   DATA 1     abc 2     dfg 3     hijI must convert this into a view that would look like: 1        2         3 abc    dfg       hijThe number of rows is dynamic. So I cannot make a static view. I cannot use pivot be