Still problems installing win7 on a Big Bang Marshal

could someone please instruct me how and what to do ?????
I have not been able to make a complete installation of win7 on my new build
The last message I have been given is that It was unable to update the registerdatabase data in the installation !!!!
I have done a CMOS clear up using the clear CMOS button and I do not know if that is the reason for my problems
Do I need to enable AHCI  and enable both hotplugs for my SSDs !!!!!!
Many thanks in advance    

AHCI may have some problems with SSDs, you can stick with IDE mode.
Pardon me for asking this but is your Windows 7 a legit copy?

Similar Messages

  • MSI BIG BANG MARSHAL -- UEFI-(Click-BIOS)-BETA Releases [MS-7670]

    I will upload the latest available BETA Release for the BIG BANG MARSHAL mainboard: E7670IMS.113 [v1.1b3]
    Changelog:
    E7670IMS.100 ---> E7670IMS.113
    - Fixed the system will hang in blank screen when press F11 to select UEFI DVD installing 64Bit OS issue.
    - Fix DRAM Timing not match SPD value.
    - Add the new BOM support.
    - Improve mouse compatibility in bios setup menu.
    - Change the Package C State limit item default value.
    - Fix the PC Health Status show N/A issue when use the User PassWord entering the Setup.
    - Fix can not entering dos mode issue when onboard lan controller set disabled.
    - Fix plug 4 dimm G-Skill F3-12800CL7D boot fail when XMP enabled.
    - Fix mouse click will hang 0Dh in some page when entering setup with user password.
    Flash/use this release at your own risk!
    For BIOS Update: >>Use the MSI HQ Forum USB flasher<<

    Hey guys real quick. So after updating to the new 7670IMS>310 bios so that I may use my GTX780s, I reinstalled with windows 8. Everything was fine until I was on teamviewer just last nite and upon switcing sides my bios got corrupted. How do I know you ask? Upon getting back into windows my LANS did not work so I had not internet connection. I tried uninstalling it from Device Manager and deleting it. After a few clrmos. I thought I would switch over to the other bios and see if the LAN works and it does because of the status lights because now it lights up. So I switch back to main bios and LAN works but it would not post whatsoever and just cycles through post finally ending with a " DE ". Not sure what the new LED DEBUG codes are but if someone could post it would be nice to be able to refer to it.
    Anyways on win 8, no matter what it will not let me into windows And when it looks like it will...gives me "your pc ran into problems and we are collecting data and we'll restart after" message. After a few of these wonderful messages, I decided I was going to flash my bios again. It did look like I was sucessful until after restart it did the same thing. Going through post I saw 19,15 then shuts off. Does this and ends with "DE" pc still on but nothing. No windows.
    I got lucky a few times and was able to get into my bios and decided I was going back to Win 7 64......I put the good ole XFX6990 back in and got windows 7 to reinstall and continue to flash my bios to an older one. I used your method before and it work> from 3.0 back to 1.5 then from 1.5 back to 1.2 for OC purposes. So i tried that method but it looked like it just reflash it with 3.1, odd.
    So after a few restarts everything seems fine, no cycles just normal. When I reboot normal process no double boots or cycles this time so I thought hey, that fixed my corrupted bios somehow. I thought I gotten lucky.... So I switch out the good old 6990 and in with my 780s. Reinstalled win 7 and upon completion of windows update. Again with the cycles of 19,15 turns off does this again over and over like 5 or 6 times and ends with "DE"
    And this is where I'm at atm. I remember when I DL'd the flasher and bios. I only saw 2 files which was " VALVE CHECK AND E7670IMS.310".
    When I tried to do it again with the same method as the first I have "
    #BIOS
    #BK_6.Z7
    #EFIFLASH
    #MSIHQ(icon)
    #MSIHQ_INFO
    #MT420"
    This time it does not go through the same when flashing, just tells me bios update complete. I've done this a million times and all have been successful.
    Basically I'm still on 3.1 bios but I 'm curious as what other methods do you suggest I try now? I have left everything alone after reinstalling windows and updates. Everything seems okay, reboots fine no cycles and still get the random hit or miss with 15,19 turns off cycles and ends with "DE". Would like to get a resolution if possible. Thank you and I know I said real quick right, but really. Thanks for any help.
    I'm going nuts!!

  • My graphics lost its mojo on big bang marshal.

    Things were going along quite happily until a week or 2 ago when things started lagging,  programs not quite opening as quick as they used to,  lags in web browser scrolling that sort of thing.  SSD was getting full so it got the business ( properly wiped with ocz tools and windows reinstalled ).  Things were still laggy so I run a 3dmark... I lost 1/3 of my graphics power.
    Where I was getting 36k on vantage,  Im now getting 24k.  Ive tried all sorts of things and 3dmark scores are still low.  When Im running graphics apps,  both cores are working at 100% but the temps are not getting that high.  According to afterburner the clocks and shaders are the right speeds.   Everything seems fine but its not quite.
    My rig...
    8gb of mushkin 2133 ( running at 1600 )
    2600k @ 4.8 ( run at 5.0 for benchies.  Still not got around to water yet )
    120gb ocz ssd
    2x6950 twin frozr ii
    msi big bang marshal
    corsair 1050 hx psu
    windows 7 64 ult
    http://3dmark.com/3dmv/3681293    <<-- 36k score
    http://3dmark.com/3dmv/4061865    <<-- 24k score
    http://3dmark.com/3dmv/4065557    << 1 card in slot 1
    http://3dmark.com/3dmv/4064981    << the other card in slot 1
    Single card speeds are about 14-15k,  normal speeds should be about 20k.
    GPU-Z says this http://www.techpowerup.com/gpuz/dzm44/
    the main difference I can see between the first 2 links (besides obviously driver version ) is the amount of video ram being reported.  The low score reports 4gb and the fast score reports 2gb.  Its like xfire isnt working properly.   Righto,  if anyone has any ideas,  I would be all ears and love to hear them.

    i did update the firmware and reinstall the driver  as u suggest and the problem persist
    http://img13.imageshack.us/img13/1254/23575005.png
    when i restart the computer i can see it in the boot menu and when the windows start here is what i get
    http://img199.imageshack.us/img199/4364/81488297.png
    when i go to the propriety i get this
    http://img198.imageshack.us/img198/2084/24869943.png
    i did test my usb device in the pc of my friend he have usb 3.0 also and it's working, the transfer is too slow ...did test it also on usb 2.0 and work too , and i did pluged my usb mouse and keyboard on port usb 3.0 and they work fine too
    another thing
    http://img547.imageshack.us/img547/7959/28794399.png
    i did install this driver many time and LU still telling me to update it

  • MSI Big Bang Marshal - Questions

    Hello all
    I am new here and I have been doing research on components for a new computer I am making a shopping list for. I have a few questions I have not been able to find any information online. Here goes
    1. Anything specific I should know about the motherboard other then whats in the specs? Problems, quirks, etc?
    2. Does the motherboard only support 2x Dual Video cards like 2x Nvidia GTX 590 or can I use 4x Nvidia GTX 480s?
    3. P67 motherboards with the nf200 on them support 24 pci-e lanes. if I use:
    PCI_E1 - 8x
    PCI_E3 - 8x
    PCI_E5 - 8x
    PCI_E7 - 8x
    Makes up 24
    But there are still:
    PCI_E2 - 1x
    PCI_E4 - 1x
    PCI_E6 - 1x
    PCI_E8 - 1x
    Left. Does that mean there are no lanes left and I coudnt even fill anything in the other 4 slots like PCI-E Sound, etc?
    4. If you do Dual, Tri, Quad-SLI and have a PhysX card, how many PCI-E lanes will your PhysX card consume? Is it set by the NVIDIA control panel, the number of lanes of the chipset divided by the mount of video cards or by the card itself?
    5. When people say Dual, Tri, Quad-SLI +PhysX, does it mean (Dual -1(PhysX), Tri -1(PhysX), Quad -1(PhysX) or does it mean (Dual +1, Tri +1, Quad +1)?
    6. I know Scalability of increasing arrays of video cards is pretty poor, but could I do Quad SLI +PhysX using the MSI Big Bang Marshal?
    7. Which is most advantageous, Tri SLI +PhysX, Quad SLI, Quad SLI +PhysX?
    8. Sorry, probably not related, but I wanted to do Raid with SSD's for very fast reads and writes yet have redundancy. I wanted to get some OCZ Vertex 3s and I was reading about how Raid 5 was interesting but apparently Raid 5 increases the degredation of SSD? Has anyone experienced this or have any suggestions on best raid configurations?
    Thank you for all of your help

    Quote
    P67 motherboards with the nf200 on them support 24 pci-e lanes. if I use:
    PCI_E1 - 8x
    PCI_E3 - 8x
    PCI_E5 - 8x
    PCI_E7 - 8x
    Makes up 24
    By my count, that makes 32 lanes. If not done so, a lot of pre preparation information can be gathered at the MSI Global Website. All the basic & more detailed information can be found there. The downloadable pdf manual is usually much more comprehensive than the manual that comes with the board as well, & can probably answer a lot of your questions. I don't believe the board can do Quad GTX 480 SLI.

  • MSI big bang marshal B3 HECI pointer mismatch

    Hi all
    I have a MSI big bang marshal B3 with a 2600K cpu, i flashed the motherboard with 3.1 and 3.0 bios but can't change cpu multiplier 
    Finally i went back to 1.5 bios and all is good but now i have the "HECI pointer mismatch" at boot and can't find my secondary HDD in Windows.
    I tried the MSI USB flashing Tools but same problem 
    Thanks to all for your help 

    You have this issue due to a downgrade without a special archive required. It is actually recommended to use bios 3.1 any way. Note that you need to use +/- keys of numpad to alter core ratio in later versions.
    https://forum-en.msi.com/index.php?topic=166680.msg1220674#msg1220674

  • MSI Big Bang Marshall (Intel P67) - MSI ClickBIOS II?

    Hello, MSI related population of the planet.
    I would like to ask if there is a BIOS ClickBIOS v2 for the motherboard Big Bang Marshall?
    MSI only informs there is a ClickBIOS and it looks like the 1st generation. However, on other motherboards
    which were launched approximately at the same time (such as Z68A-GD65 or Z68A-GD80) there is a 2nd
    version of MSI ClickBIOS. My question is, if the MSI ClickBIOS II is also available for Big Bang Marshall board?
    I thank you kindly for your answer and wish you a nice rest of the day!
    Best regards,
    lazyone1

    Best way to find out may be in contacting MSI Technical directly. Only the Z68 G3's had Click II, not the first released Z68 B3's.
    >> How To Contact MSI <<

  • How to configure the bios of the big bang marshal p67 (help)

    Good afternoon people I'm new here, I hope to be posting in the correct forum, and come on, I recently bought a Big Bang Marshal P67 B3, I'm using a vcore [email protected] to 1:42 daily and a kit of 2200MHz 2x2GB Gskill PIS, but whenever I play the machine locks up and has the blue screen, I'd love your help on all the settings I need to do to leave my bios over 100% stable.
     Thanks in advance for help.   

    Quote from: HU16E on 04-August-11, 11:28:03
    Right click 'Computer', then left click 'Properties', 'Advanced system settings', 'Startup and Recovery' 'Settings', uncheck 'Automatically resart'.
    Disabled.
    Thanks buddy, now I found.
    I'll take and post all the screens of my bios, if possible tell me if you configured everything right or if I need to change something ok.
    Every time I try to run prime95 linx or just going to play, does not take long to see this screen.

  • Problem installing win7 in bootcamp via usb

    Hi, I switched my early 2011 MBP's superdrive with a Corsair SSD a couple of months ago and managed to install windows 7 on it with a usb key and bootcamp using the VMWare method (A long and tricky process, but it worked). Everything was working well until some system files on my win7 drive were damaged (Impossible to launch the wlan service, frequent random freezes, etc.). I tried to repair the system install but wasn't able to do so (Impossible to repair on boot since I have no DVD drive and my system restore option was unabled for disk space reasons...). I then tried to reinstall (overwrite) windows 7 via bootcamp (I created a new win7 install usb stick, then tried to reinstall it at boot but it said something like "No installation disc found, please insert the win7 install dvd and press any key", in other words, windows boot utility wasn't able to see my usb stick).
    Now, my situation is the following: I managed to boot back on OSX, I see my second SSD but it's now empty and formatted as "BOOTCAMP" (not a problem since I want to reinstall win7 completely).
    Is there any way I could still make a fresh win7 install via USB on that SSD drive or is it easier if I just remove the second SSD from my MBP and install win7 on it by connecting it to my PC...?
    Thank you,
    Jean.

    "I tried to reinstall it at boot but it said something like "No installation disc found, please insert the win7 install dvd and press any key", in other words, windows boot utility wasn't able to see my usb stick"...

  • Having problem installing Win7 using Bootcamp on Mac Mini 2011

    I'm trying to install Win7 using bootcamp on my new Mac Mini 2011. I first partitionned the disc using Bootcamp assistant. Then during Win7 installation I select Partition 4 BOOTCAMP, format it to NTFS, then when I try to select the drive, it says that the drive is not compatible for the installation.
    Is there anything I missed???
    Thanks

    I had a similar problem when I selected upgrade instead of complete install. I want to make sure your aware that you should click the complete option instead of upgrade when you reach that portion of the win7 install. Then you need to select part ion 4 like you have stated and format it to ntfs.
    But it seems that you've already done all of that. My advice would be to go back to the Mac side, restore the partition using bootcamp and again partition it. You need at least 25gb of space for 64 bit. I would recommend using at least 40gb. Just trying to help. I apologize if I misunderstood your problems. But make sure you click on the opposite choice of upgrade, I did my mini last night lol but I can't remember the exact name of the option I think it's complete, then select part 4 and click format....

  • Problems Installing Win7 using External, USB DVD Drive

    I have a mid 2010 15" i7 MBP which I upgraded to from 4GB to 8GB RAM courtesy of OWC.  I recently upgraded the 500GB 7200RPM HD with a 240GB OCZ Vertex 3 and using an OWC Data Doubler, I replaced the DVD SuperDrive with the 500GB Hard Drive.
    I used an External USB DVD Drive to install OS X SL On the SSD without issues. Also, I got all my updates and software installed and working without any problems.
    I've been running great for about 2 weeks now, so I decided to install Windows 7 64bit Ultimate. I ran Boot Camp Assistant and partitioned the 240GB SSD in half 120/120. Everything went fine with creating the partition. I selected to Install from the Win 7 DVD media in the USB DVD drive and rebooted.  I got a grey screen.  I turned the computer off and turned it back on.  Holding down Option, I selected the Install DVD from the Boot Menu.  I then got a screen with the Apple Logo flashing intermittently with a Circle/Cross Hatch.  So I can't get the Windows Install to start to save my life.  I know the External, USB DVD works since I used it to install OS X and I have no problems using it in OS X.  I Know the media works because I tried a test install, without activation in a VMWare Fusion VM. 
    Any suggestions are appreciated?

    So here is the answer.  The Firmware on the MacBook Pro only supports installation of OS X from External Media and will not install operating systems from 3rd Parties.  I tried to install Windows XP, Win7 Ultimate  32 & 64bit, and Ubuntu 11.04 but no success.
    Supposedly, the MacBook Air does support installation of 3rd party operating systems from external media, but I have no way to confirm this.
    I ended up reinstalling the internal DVD drive installing Win 7 and Ubuntu on the SSD.  Using rEFI, I'm able to triple boot all 3 operating systems.  Then removed the drive again and reinstalled the 2nd HD. Everything seems to be working fine.
    I'm looking for someone who has experience in Mac EFI Hacking to see if there is a way to enable booting 3rd Party OSes from external media.  I'm guessing someone could examine the MBA firmware and figure out how to hack that capability into the MBP.

  • Problem installing Win7 64 bit on early 2008 iMac 2.66 GHz

    I have read posts elsewhere that, contrary to what Apple says, it is possible to install 64 bit Windows 7 on an early 2008 iMac 8,1. The problem I'm having is that I can't get the iMac to boot from the 64 bit Windows 7 install disc. The error I'm getting is "Bootmgr is missing". I can view files on the disc just fine when I'm in OS X, so I know the bootmgr file is on the disc. But it refuses to boot from it. I know this hardware can support 64 bit cause I can boot OS X 10.6.2 into 64 bit mode.
    Anyone else run in to this? Thx for any help.

    Thanks Hatter. That did the trick. Actually, the link you sent me lead me to this site:
    http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/
    That site links to this:
    http://test.andersonshatch.com/2009/11/08/select-cd-rom-boot-type-prompt-during- vista-server-2008-r2-windows-7-x64-boot-on-macbook/
    and that's what I used to create a DVD that was bootable by my early 2008 iMac.

  • ITunes10 problems installing (Win7 x64)

    Did some googling and searching, couldn't find anything related to this version of itunes.
    I am on a CLEAN installation of Win7 64-bit. Upon downloading 64-bit iTunes and running, i get the message: The installer encountered errors before iTunes could be configured.
    I have no clue what could be the cause, all other software install fine, redownloaded the iTunes setup countless times, ran on administrator, all the general attempts have no success. If anyone could advise me it will be greatly appreciated.
    I also own an iPod touch so i require iTunes to sync.

    What the last error message in the Windows application event viewer from MSInstaller?
    That may give us a clue where it's failing.

  • MSI Big Bang Marshall B3 RAM and VGA card compatibility question

    Hello
    I am thinking about upgrading my RAM and VGA card but will those be compatible with my mobo?
    Zotac GTX680 AMP Edition and GSkill Ripjaws 4x8GB F3-12800CL9D-8GBXL kit.

    Hello
    I am using Corsair 850W PSU and my BIOS version is 1.5. I made an error by installing v3.0 BIOS but thanks to dual BIOS feature I was able to save my system.
    I am thinking about buying those RAMs because there is a great discount on Turkey at the moment. (Nearly half price of other competitors)

  • ClickBIOS II update for Big Bang Marshal?

    Will MSI release a ClickBIOS II update for the Marshal (and/or older P67 boards like the GD53/55/65/80)? The new interface is day and night in comparison with the older ClickBIOS and is much more pleasant to work with. It would be nice if these were added for people who paid good money for their less-than-a-year-old boards, especially the $399 Marshal.

    Quote from: Jack on 28-January-12, 18:42:09
    The answer is most likely going to be "NO". The chipset is old already (Z68 came after that, Intel 7 chipsets are coming out soon (X79 is already out)).  Click BIOS II was never advertised for this board nor was an update promised. 
    Click BIOS II would also not add anything in terms of functionality, it would only be an aesthetic upgrade. 
    That is exactly my point as I detailed in OP. The user interface is a lot simpler to work with compared to the original ClickBIOS, and porting it over should require minimal effort as it doesn't need to adapt to any functional changes. I know very well when the chipsets were released, but P67 is the same generation chipset as Z68 with similar (less) functionality of Z68. The question is not in the chipset, but rather MSI's business model that will decide whether or not they're willing to extend their support for slightly older motherboards, not to mention they will have to release a BIOS update for all P67 boards to add Ivy Bridge compatibility anyway. If you ask me, spending less than an hour to port over the interface to extend that support would be an incentive for customer loyalty.

  • A75MA-p35 Raid 1 Install Win7 drivers not found

    Hi all,
    Looking for a bit of help here, Problems installing Win7 Home Prem on a mirror raid. I followed the PDF manual uk.msi.com/product/mb/A75MA-P35.html#/?div=Manual  to the letter for how to create the raid, But the issue is cant seem to find any drivers to detect the HDDS, Or The DVD drive for that matter.
    I have:
    Set BIOS SATA mode to : Raid
    Used the BIOS CTRL+F Option, to create the raid. (  RAID Option ROM utility... )
    Booting from Win7 CD, Its asking for drivers for the drives The PDF above says use the driver from >
    : \\ChpSet\AMD\Packages\Drvers\SBDrv\SB8xx\RAID\ 
    (and then, please select a folder whch was classfied accordng to OS.) "
    This I have tried, But Its not listed due to the "Incompatible driver" Checkbox.
    I have tried forcing it to install this driver, and others from the CD/Net  But with no luck
    Anyone got any clues?
    Thanks

    Link worked.
    Thanks for the help.  Much appreciated.
    Tis all installing now.
    Confused to why the drivers from the motherboard CD didnt work tho?
    @Xmad.
    The USB stick was showing up fine pal, Just the drivers I was throwing at it, Didnt want to work. I did try installing the other drivers to see if they worked anyway with no luck.
    Sigh, whilst writing this. More errors on screen :(   Back shortly!

Maybe you are looking for