Still problems with external harddrive after sleep although 10.8.5 supplemental update is installed

I am on an iMac 24" late 2007. The external drive is a Hitachi (HGST) Touro 1TB (other drives are fine and never had a problem not even before the supplemental update). Disk utility finds no problems with the HD (had volume repaired never the less).
Is this just my iMac or are others here also still confronted with hd sleep problems after the supplemental update?
Thanks for your input.

I'm not having those same problems, but my USB3 external drives attached via a USB3 hub still are ejected improperly when the machine goes to sleep. Also, I've had aliases on the desktop disappear for no reason. I regret updating to 10.8.5 due to all the weird problems, and the supplemental update fixed a few things but it's still buggy... Fortunately, no data corruption from this. I keep my fingers crossed.
Since desktop sales represent 15% of Apple's revenues (and dropping), it's just a matter of time before they dump desktops all together. I see no reason why Apple would care if the desktop OS is buggy.

Similar Messages

Problem with external editors after moving photos

I moved my photos from an external HD to the drive in my new iMac. I did not change the names of the folders or files. Lightroom still works. The problem is that external editors, such as OneOne Perfect Photo and Color Efex, no longer work. I can't open photos from Lightroom to be edited in those programs. OneOne suggested fixing the disk permissions in Utilities. I tried that but it didn't work. I'm not sure the iMac even fixed the permissions, and the photos will won't open with an external editor. Any suggestions?

Reload the firmware update and make sure it completes.

Problem with external HDD after installing updates in Mac os X 10.5 leopard

Hi,
I just went out to the store and bought a copy of the leopard.
I installed it with nothing attached to the computer. Everything went fine.
When I went to update the software I had two packages there that I updates, so I had to restart the computer. when it started again it indicated that it had problems with my Iomega Ultramax 1tb disk. It says that disk repair failed and that I only have limited access to the disk. and since it's ALOT of data on the disk, I don¨t rally got the tools to copy everything to another location and then erase the disk and copy everything back. So does anyone know if there's a solution to this.
I'd be really happy to get a solution on this,
thanks alot.
Rich

When I'm using disk utility and use "verify disk" I get the following message:
"First Aid failed
Disk utility stopped verifying "UltraMax" because the following error was encountered.
Filesystem verify or repair failed."

Problems with external/usb after installing new hard drive

After having a new hard drive installed (from Mac 10.5.2 to 10.6.8) I have experienced 2 problems so far:
1. I am getting no response (from anything connected from my usb port) ie. mouse. But plugging in the mouse directly into the mac works fine.
2. After a few minutes, the sound from my production speakers (connected: macbook->usb cord->sound card-> production speakers) starts to skip and then no sound at all, however my soundcard is still working as I see the light is on.
Can anyone let me know how this can be fixed? I never had these problems before getting the new hard drive.

try doing a PRAM/NVRAM reset.......
that might sort out your issues.......
good luck.....hope it works for you...

Problem with external keyboard after firmware update

I had an external keyboard plugged into my Macbook Pro (I normally use it on my Power Mac G5). Did a software update on the Pro, had an update for the Aluminum keyboard. Didn't notice it saying not to have any external keyboards plugged in. After the software failed to update because of my external being connected, the external stopped working, both on my Macbook and on my G5 tower. When I connect a mouse to the keyboard, the mouse still works completely fine. But typing won't work.
Any idea of what I can do to fix this?

Reload the firmware update and make sure it completes.

Problem with external harddrive and disk utility

I have just about ran out of room on my iMac G3 so I went to walmart and bought a FreeAgent 320 GB external hard drive. On the bottom it says its compatible with my iMac G3 you just have to format it using disk utility.
So I open up disk utility and I see my hard drive. I click on it and then go to erase so I can format it to work on my mac. However everything on the erase page of disk utility is greyed out and and I can't click on anything.
What do I do? Thanks.

I recall that the old imacs could not use a HD over 130G or so unless they are partitioned. So you may need to make three partitions first with your disk utilities. It should format it at the same time.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Still problems with Apple id and emails after move to iCloud

Hi,
After move from MobileMe to iCloud, there are still problems with apple id's and emails.
I'm trying to delete a mail (email1) from one apple id, but nothing happens?
And when i'm trying to add a email (email2), that i Know isn't linked to another apple id, i get the message that it is already in use with another apple id?
It's a problem when you use these emails with facetime, imessage etc ...

My iPhone 5 and 4 both are having no trouble connecting to the Apple store, but my iPad (4th Gen) cannot either connect to Apple store, nor stream music using iTunes Radio. Keeps asking for my Apple ID and password. When I put it in, it says that I cannot connect. If I put it in wrong, it tells me its wrong. Tried changing my password on my desktop PC. The iPhones handled change and continued to connect, but iPad is unable to connect still.
Any solutions would be appreciated.

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Finder crashes with External Drive on Sleep Mode

I purchased my new iMac 21,5" less than a week ago, and I haven't had a problem with it except for one that it's been bugging me a lot.
I have a LaCie 1TB Quadra d2 external drive that I use to store footage (since it's HD, the filesize won't fit in my 500TB internal hard drive), but I noticed that sometimes when LaCie external drive enters in Sleep Mode, the Finder freezes and the only two ways around this, is to force reboot, because the Finder won't answer and won't open again, or unplugging the external drive without ejecting him first, which it's not safe for me to do, because I'm afraid of hurting the device, and the files in it are pretty important.
This happens almost everytime, especially after a long time on sleep mode. I usually leave Final Cut Pro transferring files all night (since it takes a long time) so I kinda need the sleep mode, but when I wake up, Finder and Final Cut Pro won't answer.
I updated to Snow Leopard 10.6.8 on day one. Is there a way to fix this? Is it normal? I read somewhere that some users were having trouble with external drives on Sleep Mode, but I can't seem to find any further information about this problem.
Thanks!

I've got a MacBook Pro 13.3" that's a little over a month old, with a LaCie 1TB LaCie d2 Quadra with USB 3.0, #301542U and I'm suffering the same problems and a few others with it. I've got a partition on it set up as my Time Machine backup drive. I've turned off the Put the hard disk(s) to sleep when possible in the Energy Saver preferences but I'm still having the sleep problem with it. According to the LaCie Manual:
By default, your drive will enter Eco Mode after 30 minutes of inactivity in order to conserve energy. To exit Eco Mode, simply access data on the drive and the disk will automatically restart. You can manage this feature using LaCie Desktop Manager. Click the Eco tab.
The LaCie Desktop Manager (in my case) only takes me to the Energy Saver Preferences in OS X to adjust the time there. Turning off Put the hard disk(s) to sleep when possible doesn't seem to make any difference, the drive still goes to sleep after 30 minutes. However, after 15 minutes the drive seems to wake back up, but then during the next 15 minutes goes comatose (no power light). Sometimes it will go through multiples of these sleep wake cycles without going into a coma, but eventually it does go into a coma. This happens in between hourly Time Machine backups.
After locking up Finder, Disk Utility and Time Machine multiple times trying to access the drive in this state I figured out that I could cycle the power switch to regain use of it (with a Finder warning of course) but this will only lead to file corruption eventually and I shouldn't have to resort to this. I've also dismounted it, expecting it to turn off and instead it goes into an extended spin down cycle (rapidly flashing light) and never turns off (or goes to sleep or what ever it's supposed to do) and once again requires turning the power switch off.
This is just too unpredictible and unrelable for me and as soon as I get the opportunity to do a 7 pass erase I'll be returning to the place of purchase. Based on the reviews of other external hard drives a drive from another company doesn't look to be much better of a prospect so I'm not sure what I'm going to do.

Problem with smart Playlist after Upadte to 10.6 - PLEASE UPDATE SOON, Backup not possible

Apple, Apple, Apple... (again)
Is it so difficult to let things, that are quite good, just there where they are??
After updating my iTunes, OS Lion and some other stuff 2 days ago, I have now a big problem with a smart Playlist in iTunes 10.6. Before updating all things was right.
The problem: Now, AFTER UPDATE, my Playlist ist totally empty!
Before they were over 2000 songs in it.
And because this is my major-smart-Playlist, which is established to my whole other Smart-Playlists, the other ones are also empty.
And this is not the first time Apple.
It´s good, if you - apple guys - just added something like new categories to sort of music (like "iCloud-Status" or some others).
BUT WHAT DID YOU THINK, WHEN YOU DELETED THE OPTION "VALUATION" - mh??? (I hope in english this is the word that used in Itunes - my iTunes is in German)
So I don´t mean the "lines" - I don´t know the right english word - when you see the music. There you can fade in "Album-Valuation" - new - AND "Valuation" - old.
But I mean in the options of the smart-playlists - THERE ARE ONLY "Album-Valuation"!!!!! What the heck....
EVERYONE NEEDS THE NORMAL Song-"Valuation" - and not the album (because normaly you decide by each track how good he is and not by the whole album).
You can let the Album ones in it, BUT PLEASE BRING THE NORMAL ONE BACK.
So, in my case, I tried to go back to iTunes 10.5.3 with my nice Time-Machine-Backup. So, but I couldn´t because there came a bug-message that said something like "It is not possible because OSX need the Programm".
What is that?
I also couldn´t delete the iTunes app from my app-folder.
So, and now?
I had to totally restore my volume !
What is that for a solution?!
So please think before you delete any functions, who is needed by many people.
And if you did, maybe ask some users, that uses for example smart-playlists alot, if there is a problem about some changes, you want to add.
I hope anyone from Apple read this and also answer me. Because I´m upset about that.
In every iTunes-Update I am concerned about what will be after the update.
For example in the past, there was more than one changes in iTunes with the Valuation. First, there was just whole stars to set for every song. Than, after a long time, Apple decided to give the options for also half stars. So I said to myself - hey that´s great, that I don´t have to use external apps anymore to set these. So I did this to many of my songs (and that´s many).
Than - after an Update - wow, all half stars rating are gone ! Great Apple, really great.
I was VERY upset.
So after an other update, the opportunity to give half stars are back.
I thought, my god, it is so difficult to talk with other guys, that worked before on iTunes if I am new or just to look if there was already a change in that part of the app???
So, apple guys, please don´t think that I want to attack you. But please be more carefull in the future. I hope that I don´t have to worry too much about so stuff. I really have better things to do with my time.
So, have a nice weekend.
Greetings from Germany.
Marco Blum

Hi..
Use Lion Recovery to reinstall the Mac OS X.

MBA not always recognizes external display after sleep

Hi,
I have a 2011 MBA and use it on a external display (Dell 2709w) with the lid open. The issue with this MBA is that after sleep it often (every second time I wake it up) doesn't show anything on my external monitor. In order that the external monitor works again I have to plug the DVI cord out and in or press recognize monitors under monitor settings.
I also did a PMC and SMC reset but both did not help.
I have also done a complete reinstall witch did not help as well.
I also did a test with a MBA from a friend (exact same model) and his always works with the external display after sleep while mine only works every second time.
Could this be a hardware defect? sound pretty strange to me, but who knows...

I have managed to make the Apple Hardware test by just pressing "D" while restarting. The test, however, did not find any error - but this does not surprise me as I think it only tests the ram.

Inkscape/X11 Problems with external Monitor

Hello,
I´m using Inkscape to create vector art on my MacBook Pro.
Since my update to Mavericks I´m having problems with X11. I have the version 2.7.5 of XQuartz installed currently.
After some troubles, Inkscape opens up just fine.
But I cannot drag Inkscape over to my external monitor, which is based to the right of my notebook.
Inkscape simply disappears.
I´m quite the DAU ;-) with Computers and Software, so it would be nice, if you can help me.
Thanks a lot in advance!
Best,
Sonja

How about trying a native Mac app like iDraw http://www.indeeo.com/idraw/

Problems with external context mapping

Hi ,
I am having the following problems with external context mapping from one WD component to another.
Problem description:
In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
After i have created the component for the used component I try to fill values in the source node contextB thru this code:
wdContext.currentContextB.setB(value);
But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
Thanks in advance for your help.
Best regards
Sourav

HI,
Valery : I personally checked by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
wdContext.currentParentNodeElement().setFname("Abhijeet");
wdContext.currentParentNodeElement().setLname("M");
i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
if this doesnt solve your problem, please post the expanded exception.
hope it helps
let me know if you face nay problem
regards

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Peggy
You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
Two more questions:
1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
Daveben

Still problems with external harddrive after sleep although 10.8.5 supplemental update is installed

Similar Messages

Maybe you are looking for