Still strange problems with 9600PRO...curious

I wrote some days ago about problems with my Connect3d Radeon 9600PRO.
The thing is that I tried it in my friends pc and it works fine (benchmarks and games without these "Graphical Corruptions and Errors" that made me reset my PC when they appeared)
Now, I have a 865PE MSI motherboard and another from Intel (PERL) and I still have this graphical errors playing and benchmarking. Whit my friend's Radeon 9600PRO exactly as mine one (from Connect3D) I didn't had this problems.
But I discovered one thing. If I put a 80x80mm fan over the graphics card, it doesn't have problems May it a be a "hot" problem?? May it be that the card is overheated??
If so, someone told me to change my radeon bios, but I don't know how. Can anyone tell me a page where it is explained.
Thanks

Download clockgen (just google it) and make sure your agp speed isn't too high. Lots of people have reported that MSI oc's on certain settings. Even though your friends card runs fine, it might just have more oc headroom than yours.

Similar Messages

Strange problem with new iBook G3 battery

Hi everyone!
I'm facing a strange problem with the new battery I've bought for my 12" iBook G3 800MHz (full specs PowerPC G3 800MHz CPU, 640MB SDRAM 133MHz, DVD-ROM, 20GB HDD, running OSX 10.4.11)..So I've got this laptop two months ago from a friend who wasn't using it anymore, and the original battery was almost dead: 141mAh of maximum charge was giving me about 6 minutes of work. I've recived the new battery yesterday (it was completely charge-less: the indicator lights weren't working), but it has this curious problem: when the iBook is off, it won't charge. I gave it a full charge with the laptop on, up to 100% (4414mAh), and was working fine. But this morning it started going crazy: osx gets bad charge readings, since the percentage jumps randomly from the correct value (and there stays about 2-3 minutes) to 3-4% or 100%. The battery itself is working: only readings are really bad. And there's still the odd "I'm not charging while iBook's off" problem..I'm currently trying to calibrate the battery: could that be the problem? I've already made PRAM, NVRAM and PMU resets..ideas? Thanks

Before sending it back try a PMU and PRAM reset.
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1431

Strange problems with memory dimms(Banks) in imac 27in mid2010

Hello dear Apple community. I had a really strange problem with memory dimms(modules anyway)
I have one really good imac 27in with i7 but as you know after some years the lcd screen became yellowish and cloudy
So i decided to clean it as i have some knowledge and i did that to others lcd screens with success.
OK so after successfully cleaning and working like new ( i mean not the external screen with magnets but the lcd internally)i started it.
Before dismantling my memory was 16gb ( 4x4 dimms)
After starting it a strange problem arise without any reason! Memory reduced TO 8 GB!!!! memory banks on the right as we seeing it didnt worked at all
and it was not from dimms because i swapped them..!!!
So after a lot of thinking and asking tech guys to take a second opinion all the saying (including me that logic board failed for some strange reason.
Some days before i installed CCleaner and also Onyx because after a lot of installations and uninstallations my mac became a little sluggish..
I thought that some serious preferences files removed or some hardware settings deleted with Onyx ( is very good and powerful program that can fix the pc and also destroy it in a second) so i removed and reset all preferences. But nothing changed.. So i put a new hard drive and reinstall OXS to see if something can change.
After formating HD to appleHFS+ saw system profiler that still couldn't see all banks(16gb). I remove logic board and i put another processor i7 that i have as a back up and still nothing( some saying that only these 2 things must be faulty if memory banks not working , processor an logic board and sometimes reinsatlling OS can fix it as i mentioned before. But still nothing...
So from my nerves and after so much testings and no sleeping for 2 days as it was working i pulled off the memory modules from the right bank i put them again ( off course nothing changed) and i close it. After i restarted it like a miracle finally i saw that i have again 16gb in system profiler!!
Tech guys here please give me an explanation to this because i gooing crazy! What happened and after i pulled off the dimms while it was working the problem fixed?? It is not recomended at all this action. I forgot to mention that i did Apple hardware test and nothing found..
Sorry for long post.

Okay great news... My memory problems are solved and my Mac Mini is now running at 8 gigs of Ram. I tried the suggested DD3 1333 which the computer wouldn't even recognize.
So after visiting the Apple Store in the Fair Oaks VA shopping mall; they suggested that I try DDR3 8500 ram. I visited Micro Center in Vienna VA, and I purchased BGreg's Suggested Crucial Brand Ram. 10 minutes after I got home the Mac Mini booted on the 1st try with 8 gigs of Ram.
Some venting that Apple hopefully will read and mention to their resellers....
The people in the Apple section of MicroCenter in Vienna at first argued that the Mac Mini only supports 4 gigs. EVEN AFTER I SHOWED THEM THE SPECS on the Apple website. The clerk (who I am calling a clerk because by no means was he a "specialist") even suggested that the Apple site was wrong. On a later visit to MicroCenter to purchase the DDR3 8500, that the people at Apple recomended; Microcenter even suggested and argued that I needed DDR3 1333 and NOT DD3 8500. THIS WAS AFTER I TOLD THEM THAT Mac Mini WOULD NOT RECOGNIZE the DD3 1333 Dimms. Working in retail myself I don't go along with the concept that the customer is always right, however in this instance clearly I was.
I should point out that some of the staff in Microcenter really do try hard, however like with any business it only takes a few "know it all" bad examples to turn customers off.
Curious post thought; I wasted about $75 in gas driving to and from Microcenter because of their bad advice.

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with reminders when waking iMac

I'm having a strange problem with reminders in Mountain Lion, and I thought someone might be able to help. If I have a reminder set, and it goes off when my iMac is asleep, after waking the iMac I can't dismiss the reminder. I can click on "Close" or "Snooze" once, and there is the puff of smoke like it has been dismissed, but the notice is still on the screen (even in the Dashboard view), and hover over it only gives the spinning beachball and I can't access notifications with the two finger swipe. So far, restarting my iMac is the only solution I have found to this situation.
Is anyone else having this happen? Is there an easy solution? Thanks!

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

Strange problem with DatagramSocket and DatagramPacket.

Hi!
I got a strange problem with UDP sockets:
Client (hardware device) send binary data messages, consisting of bytes and shorts fields (8 and 16 bits). But when I tried to read byte array, received from socket, I got some type anomaly. For example:
byte[] buffer = new byte[1024];
DatagramPacket packet = new DatagramPacket(buffer, 1024);
socket.receive(packet);
byte[] data = packet.getData();
System.out.println("Received data:");
for (int i = 0; i < packet.getLength(); i++) {
System.out.printf("%h:", data);
I got such thing: 34:4:fffffff1:ffffffdb:ffffffdc:20:1:1:0:2:50
If I try to parse it using ByteArrayInputStream and DataInputStream
ByteArrayInputStream is = new ByteArrayInputStream(packet.getData());
DataInputStream dis = new DataInputStream(is);
int head = dis.readByte();
int recvinfo = dis.readByte();
short count = (short)dis.readShort();
System.err.printf("Decoded:\n head: %h\n recvinfo: %h\n count: %h\n",
head, recvinfo, count);i got following:
Decoded:
head: 34
recvinfo: 4
count: fffff1db
So I get Integer entries in byte?! array. I also got Integer even I try to read and cast it as short in short!!! variable.
Please help!
P.S. Sorry for my bad English.

Rather fortunate that it auto-casts(or rather, that 0xFF is int by default, rather than attempting any type-detection as most languages do), as otherwise the brackets would have been in the wrong place. If it was still a byte after the "& 0xFF", sign extension would still occur.
For the sake of the less bit-literate reading this thread, it should be explained that the reason for this was large bytes being interpreted as negative numbers, which translate to negative int, which in hexa become very large ints. That's about as verbose as I can be about this without writing the equivalent of a wikipedia entry about 2s complement.

Strange problem with Contribute 3

I have a strange problem with Contribute 3. One of my page
editors changed a single page on my web site and submitted it for
review. When I go to review the page, 75 pages show up to be
reviewed. If I try to edit the actual page that was changed, it
tells me I can't approve the changes until I accept the changes on
the other pages and each of those pages gives the same message...an
infinite loop. The only way to get around this is to reject each
page individually and this took several hours. She tried again and
the same thing happened. How can I fix this problem. I think it is
a bug in Contribute because 74 of these pages had no changes to
them.

Still haven't solved this, even the backup no longer works...Would anyone be interested in helping me by letting me send them a project, making one simple change for me, then saving the project, returning it to me and exporting it as wav?
this would help me tremendously...
let
me
know
if
u
can
help
anyone be interested in helping Mr

Strange problem with motherboard H67MA-E45(B3) =( please help

Hi, I have a strange problem with my motherboard . I have a H67MA-E45 (B3) (MSI-7678) , when i try to update it ( http://www.pcbrain.it/images/stories/msi/H67MA-E45/bios/14.JPG ) , i choose the fourth option "Select one file to update bios" , but the bios did not recognize the update file (E7678IMS.1C0) into the Usb flash drive , but if i choose the second option (select one file to boot) the file is recognized. First I made a backup of the bios, and into the USB flash drive has been created a file called "E7678ICX.162" (my current update). Why the extension is IXC ?!? it should have been IMS ! . I tried changing the file extension "E7678IMS.1C0" (the new update) into "E7678ICX.1C0" and when i select the fourth option , the file is recognized! . Obviously I have not started the update , but if I proceed with the update, changed the name of the extension, is it safe? Or do damage?..please help me :(
P.S. Sorry for my bad bad and very poor english , i'm italian =)

Quote from: HU16E on 28-September-11, 04:38:29
Manufacturer's Website info;
"KHX1333C9D3B1K2/4G 4GB 1333MHz
(2 x 2GB) CL9-9-9-27 1.5V"
Still think there is a batch conflict or possibly a bad stick in the new sticks. Might test each new stick individually for a bad one. Again, the other solution for an 8BG kit may be the new Kingston HyperX PnP's. Could you post a screenshot of CPUID's CPU-Z Memory & SPD Tab for one of the new sticks?
Added: Actually, screenshots of the old sticks Memory & SPD Tab may be of help too. It may be tRAS or tRFC differences between the two kits. Just speculation at this point though.
All the batchs works perfectly...this is the screen http://imageshack.us/f/163/ramkk.jpg/ ...save and zoom
EDIT: The old stick are SLOT #1 and SLOT #2 ...the new 3 and 4

Strange problem with SSL Sockets using more than 10 Clients

Hi
I�m using Jsse ( JDK 1.4.2_06 ). I have coded a Client/Server Applikation acting over SSLSockets or over unsecured Sockets. If I use unsecured Sockets everthing works fine, but if I use SSLSockets for the Connection and about 20 Clients, the Clients often can�t connect to the Server and the following Exception was thrown:
java.net.ConnectException: Connection refused: connect
Could it be that there is some strange problem with SSLServerSockets relating to this phenomenon?
If I use only a few Clients the Exception occurs never or only sometimes.
Has anyboby an idea what is happaning there?
Regards Chrisli

Hi
From the description of your scenario, you have coded your own server side of the application. I would advise that you consider moving your application to run under Tomcat framework and test if you still get the same exception.

Strange problem with Domain Values

Dear All,
I encounter one strange problem with Domain Fixed Values.
Background:
We have a custom domain ( ZXREF2) created for custom data element(ZXREF2) which has replaced standard dataelement in BSEG for field XREF2. This domain has 12 Fixed values. The idea was to have F4 help for field "Reference Key2" in FBL5N/FBL01 tcodes. It is working fine with these 12 Fixed value, means, on F4 we could see all these 12 values and when selecting a line from F4 the entry got thru the screen validation ( plz note hat this validation is like checking the mandatory value so this is done even before PAI).
Problem:
The requirement was to add a new line to F4 values( tecnically, 13th record in domain ZXREF2). We added this line to domain and moved to Quality system. Its working fine in both Dev and Qality, but the strange problem occured after moving and testing in Production.
In production, we could see all 13 lines in F4 help. BUT, after selecting the new one( 13th one), and after the value appears on screen field, when Enter is pressed, it gives error message "Enter Valid value".
This error message also comes when we enter any value which is not there in F4. That means, system is able to recognize the new value in F4, but falied to validate that.
We thought that, this might be the problem with Buffer, and request Client to re-start the system. Even after system restart, it still gives the same error message.
Please note that, the error message is triggered even before PAI of the screen called. So noway( I already tried system debugging) we can debug this error message to findout the rootcause.
Any quick help would be highly appriciated.
Thanks and Regards,
Prasad.

Hello Max,
I guess DB Utility ( SE14 ) is to be run only when there is a change at structure level, to make Runtime and Database objects in sync. Here, we just added a new line to existing domain, and this added a new row to the Database table DD07T/DD07L.
Could you please expalin it more clearly if your view is different that what I just described.
Prasad.

Strange problem with P35 Neo

Hi there.
Got a strange problem with a computer that got a P35 Neo system board.
The problem I got, is that the computer don't boot. If I reset the CMOS,
I can get the computer to boot, but then it hungs on loading Vista.
Then I try to repair my Vista. Then the computer hungs while loading the DVD.
I have tried to boot with only one RAM in the computer, but the problem still
there...
I have tried to reset the CMOS by changing the JPBAT (I think it called so) jumper
and to pull out the battery.
I have tried to disconnect all, but one HDD and but I can't say that it worked any
better...
Any ideas how to find out the error?
2 x 2 GB Corsair RAM
Intel dual Core CPU
Radeon 1950 PCI-E
1 Samsung SATA HDD
2 Seagate SATA HDD

Quote from: BOSSKILLER on 25-August-08, 20:31:15
What PSU you have? Corsair Powersupply 550W Black, ATX/EPS
Provide better details about memory sticks used. Corsair TWIN2X 6400C4DHX DDR2
What CPU? Intel Core 2 Quad Q6600 2.4 GHz
BIOS version onboard? Note sure, since I'm not right at the computer for the moment. But I think it's 1.0 since it is brand new from store.
Do memory check with >>Memtest86<< Well, it's kind of difficult, since the computer dont boot.

Strange problem with KT4V

I have a strange problem with the board
when booting,the cdrw only blinks and can`t read cd`s.
I have tried swapping to another cd-rom,but still the same problem.I updated to the new bios (1.9)without problems.
my specs are:
KT4V
512MB PC2700
MAXTOR 80GB HARDDISK
MSI 52X24X52 CD-BURNER
MSI GeForce4 Ti4200 64MB DDR DVI

Quote
Originally posted by THE VIKING
I updated to the new bios (1.9)without problems.
When begun it to happen?
Before or after the BIOS update?

Strange Problems with XDK v10 Beta Version

Hello together,
I encounter two strange problems with the new 10.1.0.0.0 Beta release of XDK. I already posted them in the Beta Release Testing Forum, but got no replies, so I decided to start another try here. Maybe anyone can help me...
I upgraded a fine-working XSQL web application from XDK 9.2.0.4 to the new 10.1.0.0.0 Beta release of XDK. Since then, two bugs came up, which are reproducible by will:
1.)
When processing XSQL insert-requests, the error given below is thrown. I already found an entry in the bug database that says that exactly this error should have been fixed since 9.2.0.3 (see http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230695.1), but no it seems to be there again.
This is the stack trace:
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/sql/OPAQUE
at oracle.xml.xsql.actions.XSQLInsertRequestHandler.handleAction(XSQLInsertRequestHandler.java:118)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:158)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:171)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
2.)
When I deploy and start the application now, I always get the following error only once(!) after deployment when I call the application for the first time:
XSQL-017: Unexpected Error Occurred
java.lang.NullPointerException
at weblogic.jdbc.oci.Statement.executeQuery(Statement.java:865)
at oracle.xml.xsql.actions.XSQLQueryHandler.handleAction(XSQLQueryHandler.java:161)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:158)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:171)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
When I reload the same page, it works. However, this is not really a good state for productive use.
Any ideas? After days of research, I'd be very glad for any help.
Thanks alot,
Eckhard

Once again me:
I guess I should partially revoke for the second topic: The error described above under 2.) seems to be rather a Weblogic versioning problem than a XDK bug, as it only occurs when deploying the application to WebLogic 7.0 (instead of 6.1, which was used before). Maybe I should search the BEA docs for an answer.
However, the first bug is still a problem to me...

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

Still strange problems with 9600PRO...curious

Similar Messages

Maybe you are looking for