Still the classloader
I am using a stateless session bean inside a servlet but I'm getting the ClassCastException...
I have already set the classloader tag to false and it still doesn't work.
What else do I have to do to solve this problem?
Thanks in advance,
Nuno Geraldes
It's all working now...
It was only an error in the narrow call.
Similar Messages
-
Hi everyone,
I just have my new Ipad4 last January 27, I noticed that while downloading a certain Apps in App Store then scrolling to look for more application, my screen would flicker like flashing or something blinking on it. I don't know what happened, why is it like that? Is it somewhat connected with hardware problem or does Ios 6 version still have a bug? I've tried using safari and other video downloader like vdownloader and I tried searching in youtube, still the same dilemma, it flicker also while browsing some video. Is it hardware problem? I already reset and restore my IPAD thou its a new one still the same dilemma happened again. What should I do? It was a gift for me and I'm really worried about it. Hope you could help me regarding it. Thank you so much.Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?
5GB is typically not enough space to download a movie. Often, movies take from 3 - 5 GB to begin with. The only option you have is to delete more things from your iPad. You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.
-
I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please
You have to provide your computer's administrator password in order to install Flash Player.
-
Bug Report: New conversation window stills the sys...
Bug Report: Skype Desktop: New conversation window stills the system/keyboard focus.
When the UI is in multi-window mode and a conversation window pops up (due for example to a newly received chat message), that window steals the system/keyboard focus, even though it appears in a minimized state in the Windows taskbar. And this should not happen by default, because it is impractical (especially for screen reader users). And it didn't happen in Skype 6.21 and earlier. But since the new UI was introduced officially in Skype 7.0, it started happening constantly.
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Move the system focus to another application.
7. Tell someone to send you a chat message. When the message arrives and the conversation window pops up minimized in the Windows Taskbar, everything seams to be as it should. A few seconds after that however, the system/keyboard focus gets moved to that new conversation window, even though it is neither restored/maximized (it is minimized), nor it is visible on the screen (except as a button in the taskbar).
Actual results:
When a new conversation window pops up in the Windows taskbar, it stills the system/keyboard focus to itself from the currently focused application.
Expected results:
Skype's popping up new conversation windows should not still the system/keyboard focus to themselfs from the currently focused application.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design -
I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these emails at one time from the phone?
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Copies of a Project - still the same in Portal
Dear SDN,
me and my team are facing a problem regarding copies of a WD Project.
We have tried to make different copies of the same Project (one per programmer), in order to avoid conflicts while deploying and testing.
(Unfortunatly we have to work in the same project, because the Components are integrated).
But once in the portal, it is still the same, even with different names.
E.g., when I make some modification and deploy, the other pregrammer see my modifications in its version of the Project.
When testing, each programmer has its own link:
- SolicitacaoContratacaoCopia001/SolicitacaoContratacaoApp
- SolicitacaoContratacaoCopia002/SolicitacaoContratacaoApp
- SolicitacaoContratacaoCopia003/SolicitacaoContratacaoApp
I just would like to know what happens, internally in the Portal, that the Projects doesn't get separate!
I thank for any kind of help!!
Best regards!
FabioGoto your project file in workspace..and copy your project into different location and then there is a file called PROJECT, open that with notepad..
you may see the below lines
<projectDescription>
<name>your_project_name</name>
within <name> tag give the new project name & import. This name will become the new project name.
Hope this will solve the issue.
Raja
Message was edited by:
Armin Reichert -
My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
I just upgraded my iPhone 4 and iPad Mini to iOS 7, suddenly they both can no longer access to iTunes nor App Store. The message says "Cannot connect to App Store". After some research, I did reset all, and still the same. Can anyone have a clue? Thanks,
As I mentioned earlier, when I clicked on the App Store or iTunes Store, the message reads "Cannot connect to iTunes Store" or "Cannot connect to App Store" depending on which I clicked.
I did check iTunes & App Store, it used to show my Apple ID there, but somehow it shows empty there. I then manually typed in my Apple ID, it just won't work. I know for sure that my Apple ID works as I tried logging online using that ID fine, but my iPhone and iPA
Thanks, -
windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.
Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps. -
i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........
I seem to be having the same problem on my brand new iPhone 4S. Everything was working fine on the phone until I updated to iOS 5.1.1, but now I no longer receive push notifications for the native Mail app, Instagram, or the Facebook app. I still seem to be receiving SMS texts and iMessages via push, but the aforementioned apps need to be opened before I can receive missed notifications (having them open in the background seems to make no difference).
Thanks for any help that you may provide!did you try notifications under settings? You can customize it as per your requirement, for each application.
check this out: http://www.gottabemobile.com/2011/10/12/ios-5-how-to-use-notification-center/ or http://reviews.cnet.com/8301-19512_7-20120625-233/ios-5-notifications-a-deeper-l ook/
Maybe you are looking for
-
Is there a way for me to "gift" or send an album download from my iTunes account to my daughter in another city?
-
i know its a noob question but how do i sign in to my me account? in safari where do i go?
-
I restored my ipod touch however the apps will not sync. I tried to re-download but I changed my apple id as my old id is no longer a valid email address. Any ideas out there please?
-
Data columns overflow when viewing in HTML or infoview
Hopefully there's a simple answer for this. I have several reports created in Crystal 2008 or XI R2 that sporadically display data incorrectly when viewed via either HTML view or published to BOE XI 3.1 and viewed in infoview. The symptom is when da
-
SAP Conference for Treasury Management 2014
SAP Conference for Treasury Management 2014 Join us in Chicago from Oct. 21-23 for this educational event Register Now! Location: Fairmont Chicago, Millennium Park 200 North Columbus Drive Chicago, IL 60601 At the event, SAP will provide you with th