Still the same bugs?! (Ovi Maps, N8)

Hi!
I'm using Ovi maps lately quite a lot but I have some problems with this software, especially with the usability. When searching the net for bugfixes/help I found an older bug report on Nokia BetaLabs: http://betalabs.nokia.com/apps/ovi-maps-for-mobile-v3-06/bugreport/23781/top-10-bugs-in-ovi-maps-v-3... and my problems are still the same but Ovi Suite says that I have the latest version (v3.06, Map version 0.2.42.122 on N8-00)
My problems are:
1.) When searching for an accurate address (Street name, No., ZIP, City name) there is no hit for offline navigation, Ovi maps needs an online search. If I leave the house number out the offline navigation finds the street - Why aren't there the house numbers stored for offline navigation? There is mostly no sense in only finding a street but not the accurate address. As long as I only use the navigation inland that isn't a big problem as I have internet connection included in my phone rate - but it's a problem abroad because of high roaming rates ...
2.) So I have always internet connection on Ovi maps - problem is that sometimes when the UMTS-connection is lost (e.g.. in tunnels) there is a pop-up if I want Ovi maps to connect to the internet. If I choose "Yes" there is some seconds later a new pop-up where I need to choose the connection - That's very annoying! I can't find a setting like "always allow Ovi maps to connect to the internet". There is only a setting if I only want offline navigation (which doesn't work, see 1.).
3.) If there is more than one result I can't figure out what is the difference between the results (except the distance) because the exact address isn't scrolling and the results are only like "Country, State, ...." - I don't see the differences because there is only "...".
4.) I can't scroll through the map once the navigation has started. There is only this mode where I can scroll threw the turns/junctions. Sometimes I like to see where the navigation takes me before I start driving, that is hardly possible without a 'free-map-scroll-mode'.
One last point is the search-process: It is more comfortable to have a step-by-step search for the destination like all major satnavs have (TomTom, Garmin, ...) and bigger on-screen-keyboard because with this tiny letters it is quite impossible to add/change the address while driving.

AUTxRemoteC wrote:Now to the points from my first post:
1.) I've downloaded the maps via Ovi Suite on my mobile. Internet connection is only used for the search, but not everytime, it's only some kB but abroad some kB could be very expensive ;-)
2.) Thanks for this hint but everything was/is configured right as you said. This is more or less a general problem of my phone, maybe it has also something to do with my provider. Not only Maps asks regularly for the connection to use, other applications like the AR-Apps Wikitude and LiveView (from BetaLabs) but also some games are doing the same.
1. Maybe I misunderstand your question but I have no problem with searches right down to numbers in streets with the phone offline i.e the country, town, street, street number is found and the cursor sits over that exact address on the map. Perhaps it is a problem with your country's maps? In the countries I use the geo data is readily available right down to the individually surveyed plots of land in towns and cities (and hence to numbers in streets).
I often find it quicker to do a search for the country first if it is another country you are searching for the address in, then do the city, street number and name search.
2. I suspect that you have not barred such connections somewhere in the set up of your phone generally or else for for some app, or perhaps, as you have games, etc loaded, one or more of them insists on "phoning home" as some do and as they have opened a connection Maps asks to use it.
That with Maps 3.08 on an N8 but I do not recall any problems on earlier versions either.

Similar Messages

  • IPAD 4 screen flicker in App store as well as browsing via safari and vdownloader. I tried restore and reset, but still the same...

    Hi everyone,
    I just have my new Ipad4 last January 27, I noticed that while downloading a certain Apps in App Store then scrolling to look for more application, my screen would flicker like flashing or something blinking on it. I don't know what happened, why is it like that? Is it somewhat connected with hardware problem or does Ios 6 version still have a bug? I've tried using safari and other video downloader like vdownloader and I tried searching in youtube, still the same dilemma, it flicker also while browsing some video. Is it hardware problem? I already reset and restore my IPAD thou its a new one still the same dilemma happened again. What should I do? It was a gift for me and I'm really worried about it. Hope you could help me regarding it. Thank you so much.

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • TS4611 do 2013 ipads have the same bug hampering internet use as mac air?

    do 2013 ipads have the same bug hampering internet use as mac air?

    I couldn't get my internet to hold at home on my new MacBook Air though it worked in other places and this is what I was told (p.s. the update seems to have worked and everything is running smoothly now):
    Some MacBook Air (Mid 2013) computers may encounter an issue that, in rare instances, may cause an intermittent loss in wireless connectivity. The Wi-Fi menu bar icon may or may not indicate that a wireless connection still exists.
    Resolution
    Install MacBook Air (Mid 2013) Software Update 1.0 by running Software Update, or by downloading the update directly.

  • I'm trying to activate icloud.  It asks me to verify my e-mail address by entering my username and password.  It keeps refusing to accept my password.  I've have changed the password twice now.  Still the same result.  What do I do?

    I'm trying to activate icloud.  It asks me to verify my e-mail address by entering my username and password.  It keeps refusing to accept my password.  I've have changed the password twice now.  Still the same result. It did however accepted my password to join Apple Support Communites just now. What do I do?

      I had the same promblem using my ipad2, I thought i was going crazy, then I noticed once when I put my user name in and checked it was right, one time it dropped the last letter of my U/N as went to hit submit so i went back put the deleted "m" back into ".com", hit enter, put in my password multiple times, tripple checked, no joy. So I hit remote on my iphone4s did the same UN/PW and it worked first time! I had the same promblem with accessing YouTube - I know I was putting the right UN/PW in but it wouldn't let me in, then miraculously one time it did... could be a letter dropping bug...

  • I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

    I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

    5GB is typically not enough space to download a movie.  Often, movies take from 3 - 5 GB to begin with.  The only option you have is to delete more things from your iPad.  You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.

  • Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it

    Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please

    You have to provide your computer's administrator password in order to install Flash Player.

  • I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

    I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Copies of a Project - still the same in Portal

    Dear SDN,
    me and my team are facing a problem regarding copies of a WD Project.
    We have tried to make different copies of the same Project (one per programmer), in order to avoid conflicts while deploying and testing.
    (Unfortunatly we have to work in the same project, because the Components are integrated).
    But once in the portal, it is still the same, even with different names.
    E.g., when I make some modification and deploy, the other pregrammer see my modifications in its version of the Project.
    When testing, each programmer has its own link:
    - SolicitacaoContratacaoCopia001/SolicitacaoContratacaoApp
    - SolicitacaoContratacaoCopia002/SolicitacaoContratacaoApp
    - SolicitacaoContratacaoCopia003/SolicitacaoContratacaoApp
    I just would like to know what happens, internally in the Portal, that the Projects doesn't get separate!
    I thank for any kind of help!!
    Best regards!
    Fabio

    Goto your project file in workspace..and copy your project into different location and then there is a file called PROJECT, open that with notepad..
    you may see the below lines
    <projectDescription>
         <name>your_project_name</name>
    within <name> tag give the new project name & import. This name will become the new project name.
    Hope this will solve the issue.
    Raja
    Message was edited by:
            Armin Reichert

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • HT4528 After upgrading to iOS 7, my iPhone and iPad can no longer connect to App Store. I did reset all settings, still the same. Please help

    I just upgraded my iPhone 4 and iPad Mini to iOS 7, suddenly they both can no longer access to iTunes nor App Store. The message says "Cannot connect to App Store". After some research, I did reset all, and still the same. Can anyone have a clue? Thanks,

    As I mentioned earlier, when I clicked on the App Store or iTunes Store, the message reads "Cannot connect to iTunes Store" or "Cannot connect to App Store" depending on which I clicked.
    I did check iTunes & App Store, it used to show my Apple ID there, but somehow it shows empty there. I then manually typed in my Apple ID, it just won't work. I know for sure that my Apple ID works as I tried logging online using that ID fine, but my iPhone and iPA
    Thanks,

  • Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
    The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
    And Book is still available on the book-store for purchase.
    (If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
    And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
    (If it is the case, then you have to use the correct userID)
    I hope it helps.

  • HT4972 i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........I seem to be

    i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........
    I seem to be having the same problem on my brand new iPhone 4S. Everything was working fine on the phone until I updated to iOS 5.1.1, but now I no longer receive push notifications for the native Mail app, Instagram, or the Facebook app. I still seem to be receiving SMS texts and iMessages via push, but the aforementioned apps need to be opened before I can receive missed notifications (having them open in the background seems to make no difference).
    Thanks for any help that you may provide!

    did you try notifications under settings? You can customize it as per your requirement, for each application.
    check this out: http://www.gottabemobile.com/2011/10/12/ios-5-how-to-use-notification-center/ or http://reviews.cnet.com/8301-19512_7-20120625-233/ios-5-notifications-a-deeper-l ook/

  • HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

    can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

    Try a new SIM from your carrier.  If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

  • Hi, My mac book pro starts lag, after shut down is still the same. Every application is taking 3-6 seconds to open, if I type something in Word letter appears only after 2 - 4 seconds, Whats going on and how to fix it ?

    Very slow performance
    Even after shutting it down and restarting still the same.
    Laggin a lot
    Please help!!!

    First, back up all data immediately, as your boot drive might be failing.
    A possible cause of a slow user interface is a large set of image or video files on the Desktop with preview icons. If you have more than a dozen or so such files, move them to another folder.
    Another possible cause is iCloud activity, especially Photo Stream synchronization. If applicable, uncheck all boxes in the iCloud preference pane and see whether there's an improvement.
    Otherwise take the steps below when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Select the 50 or so most recent entries in the log. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message. You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Download error. Tap to retry.     Why? I have a wifi and still the same message?

    Download error. Tap to retry.... Why? I have a wifi connection and still the same message, and even connected to desktop the same for ipad. Help :-)

    I'm getitng the same thing.  I'm beyond sick of this iPad.  It's a third generation Retina Display and it turned into a pile of cat turds after iOS 7.  It got so bad I restored it and used iCloud. It was still god awful.  I restored it and didnt use the iCloud backup and hoped that whatever was wrong would be avoided....nope.  IF I can get a download going it nearly kills my entire iPad.  I will open the cover and wait over 30 seconds just for the screen to light up.  I will hit the home button to close an app and wait nearly a minute in some cases for it to actually close.  Then to top off all the annoyances it just fails and loops over and over. 
    I bought Apple products to avoid stuff like this.  Very unhappy.

Maybe you are looking for

  • My Safari crashes immediately upon opening.

    The title is pretty clear. I've been trying to use Safari all day but the software does not seem to want to comply. Please help. Process:         Safari [17704] Path:            /Applications/Safari.app/Contents/MacOS/Safari Identifier:      com.appl

  • Seemingly Impossible Problems with iTunes

    I've never had any problems with iTunes until a few months ago, and I've been unable to use the program since. It all started when I upgraded to iTunes 10, and my computer randomly started to freeze every time I tried to open the program. I thought t

  • Extracting info from HTML documents

    My program returns the HTML of any web page entered by the user. The HTML documents that are returned all contain pricing infomration that I want to extract. Any idea of the best way to search an HTML document for specific infomration I require. Seem

  • Wish to cancel subscription

    I wish to cancel my subscription and have not found an avenue to do so, even after extensive research on the site and these forums.

  • One more question about upgrading HD

    EVeryone was really helpful last time, I have one final question: Does the name matter for the HD? I have bought my HD, used SuperDuper and am actually already working off the new HD via Firewire. Does it matter what I NAME the new Drive? When I used