Still troubling issues on 6303c(need help)

1.some games and app shows "out of memory" error
2.i cant see progress bar and also cant fast-forward *.acc file type converted by nokia music manager
3.I cant chose all "application access" options.many options r unavailable.its really
troubling.i cant freely use other browsers bcoz of this
4.some applicion(like Ovi store) showing "conflicting with application" error
after updating my phone.downloaded again those app but same prob occurs.after
dat i cant even download ovi store its showing invalid application.
5.after i updated my phones opera mini.it doesn't stay in shortcut.every time
i restart my phone settings dissapears for opera.
6.Application list(in short-cut) still doesn't work.if i reset my phone it works.but after using
some application phone frezes again if i try to use applicaion list
My cell phone model is 6303 classic(v9.10)

i am having the same problem too. Actually i just bought my 6303 classic 3 days ago. I also updated to the latest vesion 10.10 per forum that may correct instability but still "0ut of memory to some even minimal apps. For instance the uzzap from smart. Imagine by just observing how the room chat goes in a few minutes say about 8 minutes will prompt and quit the the apps due to out of memory/java/lang/out of memory. This is some kind of embarrasing while i am having my chat. I hope nokia guys would do something to correct the problem. Thanks for the space

Similar Messages

In testing 9 and X, "Compare Docs" we have a critical issue and really need help!

For years we have used Acrobat 7 to do PDF compares and we love it! However, the company recently advised we must upgrade to 9 and then eventually to X. In testing 9 and X, Compare Docs we have a critical issue and really need help. Our PDFs are produced by IT in a batch process and one of our main, critical functions is to compare previous PDFs to current PDFs; however, in using 9 the Compare screen automatically sets the Doc Description for our PDFs to "Scanned Doc" and does not produce any differences! If you try to change the setting to Reports --it totally shuts down both documents without running! Version 7 runs the compare of the same PDFs beautifully, pointing out all the differences, as usual! Has this every happen to anyone? Do you know what we can do to our PDFs to allow version 9 to do the compare and produce results? Why is 9 treating these non-scanned PDF docs as such? Thanks so much for any help or insight you can give me on this issue!

(Moved the discussion to the correct forum)

Had this weird issue...Need help!!!

I got this issue, where user was not able to apply leaves on HR portal, which he was able to apply in past.
We did our analysis and found some roles were end dated by background job.
We extended the validity of the roles which were end dated, but he was still not able to apply for leaves.
Then I was suggested to remove the roles of users and assign them back and it worked.
Not sure why and how it got resolved....need help in understanding what happened here
Any response will be highly appreciated
Regards
Anshul

Then we can only speculate.
A possible speculation is buffering and some non-authorization attributes attached to the role, such as personalization keys. Some selects wait for the buffers to roll, others bypass buffering when selecting data which might have changed. This would mean that it was just timing that SU01 seemed to work, or SU01 triggered the bypassing of the buffer after the change but PFCG did not.
Anyway, as long as it worked in the end... :-)
Cheers,
Julius

Production Issue in Barcoding - Need Help

Hi,
One of our plant reported that there is a serious production
issue and they are not able to dispatch or receive goods. We
understand that the plants are getting 'ABAP Runtime Error' in
the hand held scanner and when we looked at the last transports,
we came across with the following error:
LOAD_TYPE_VERSION_MISMATCH
Please help me what is the issue and what needs to be done to
resolve this barcoding issue.
Thanks,
Sriram

please see OSS Note 713492 & 1010590 to see if this is your problem -
cheers
nandu
====================================================
OSS Note 713492 brief
Symptom
An additional time stamp check has been installed in the internal structure administration of the ABAP VM. This is supposed to ensure improved analysis of errors that may occur as a result of changes to dictionary types at runtime. In addition to the LOAD_TYPE_VERSION_MISMATCH short dump, the TYPELOAD_NEW_VERSION short dump may now also occur.
==========================================================
OSS Note 1010590 brief
Symptom
The ABAP program terminates due to structure components that are too wide (64KB or greater). Depending on the kernel patch and Support Package status:
when you generate the program, it leads to the error DDIC_TYPES_INCONSISTENT, or
when you execute the program, it leads to the error LOAD_TYPE_VERSION_MISMATCH.
Other terms

HT4113 My Ipad is disable.Now connected to I tune. But still cannot reconginsed it. Need help.

I am out of my place now. Due to some error, I used different pass code. Now my Ipad is disable. I manage to connect to I tune. But still cannot recongibse the Ipad.
Need help to restore the I pad .
Thanks

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Optical out and internal spaeker issue.. i need help..

how can i get rid of the internal speaker sound without disconnecting it from the board or pluging any 1/8 trs jack at the back while using optical out.
need help ...... thanks!!!!

Hi, and a Warm Welcome to the Power Mac G5 Forum!
Presumably it's the Startup Bong that's getting on your nerves - as you shouldn't be hearing Application sound from the puny internal speaker if you have set all the Preferences to use optical audio-out.
The Bong is part of the Startup routine in firmware, and goes to the basic audio circuit because OS X, and your Sound Preferences selecting optical audio-out, haven't been loaded at that initial stage.
The hardware solutions you have already mentioned.
These may be of interest
http://macupdate.com/info.php/id/16425
http://www.versiontracker.com/dyn/moreinfo/macosx/25458
http://www.versiontracker.com/dyn/moreinfo/macosx/28685
Personally, I find the tinny Bong mysteriously reassuring. Good Luck.

Angry birds rio quit working on my ipad. When I try to start the game, it shuts down completely and goes to the main menu screen. This started when I downloaded the latest app. The other angry bird games still work. I really need help.

Angry birds rio quit working when I installed the latest app. I even uninstalled it and started over. When I try to start the game, it goes back to the main menu. I need help badly but in simplest of terms so I'll be able to follow.

Have you tried closing the app completely ? From the home screen (i.e. not with Angry Birds 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Angry Birds app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Adobe Audition 5.5 Audio Issues! I NEED HELP

I am currently using Adobe Audition 5.5 on Windows 7. and it is also 64 Bit. I downloaded Asio4all and i am able to record just fine on Adobe. But the music wont play through my headphones. I can see that the song is playing due to the spikes i just cant hear it. I have been suggested to check the Asio control panel for the volume, but i also have no clue where that would be at or how to access it! I need help ASAP!

I doubt whether this has anything to do with ASIO4ALL...
Try right-clicking on the loudspeaker in the bottom right hand corner of your screen, and exploring the sound options there. You should be able to find the output that's driving your headphone socket, and its appropriate volume control. I can't tell you any more than that, because all systems are different, depending on what hardware you have - but the volume control properties are where you should start looking for answers.

Love the X2 except for 3 main issues which I need help or clarification with

Hi Everyone, I have pretty much copied and pasted my post from the Motorola forums (with a few minor edits) over here as I do need a little bit of help or insight on my issue.
I have scoured through the Droid X section trying to find solutions to my problems and I haven't been able to get a solid answer anywhere (here or on other Android/X2 forums).
I have an X2. I really like this phone. It is solid and has crystal clear sound quality. However, ever since I have had it I have seen intermittent issues pop up and I would like to get some feedback on them or get things put into perspective that it is a known glitch in the interface between the Android OS and the hardware. I bought the phone at Best Buy and every time I bring it in (either back to Best Buy or a Verizon store), as the issue is intermittent, they won't replace the phone. The people at Best Buy have told me to "do a battery pull every morning" which completely offends me as I never had to do anything so drastic with my original Droid until it finally decided to reboot on me every 2 hours (this is when I upgraded to the X2). I had to pick it up from Best Buy as I needed a functional phone immediately and no Verizon store in the area had the X2 in stock.
The first (and most important issue)... Every once in a while, even though I have full signal, when somebody calls me, my phone will not ring or vibrate. It will ring the full six times on their end but does not show up on my phone as ever receiving or missing the call. After the six rings on their end, it goes to voicemail and after they leave the message, only the voicemail indicator shows up. Over the past month this has happened multiple times (once or twice a week). Those who don't leave messages have had to hunt me down because they thought I had left my phone elsewhere as it never rang or notified me of an incoming call.
The next two issues are still important to me but they are more of an inconvenience than anything else.
Sometimes (yes, this is intermittent too but it happens daily), when I wake my phone from sleep, all of the antennas seem to be off and it takes a good second or two to show back up in the status bar (3G, Bluetooth, etc). My question is, have all of the non-CDMA antennas "gone to sleep"? The signal bar for the actual cell service are still there, just not the other services (3G/1X) or wireless settings (Bluetooth/WiFi) for a couple seconds.
Lastly (and this may be a direct link to the previous question), when I use the "Google Talk" application, the messages I send go through very quickly, but sometimes I do not get replies for a long time after they are sent (30 minutes to and hour later). If I wake the phone, sometimes a previously sent message will come through, and when I check the chat log in Gmail itself, the message was sent from quite a while back (15 minutes to an hour).
I know I am brand new to your community, and I am sorry to have to burden you all with a post like this as my initial post. However, I have always liked and used Motorola phones with Verizon/GTE (all the way back to the MicroTAC series of the early 90s) without issues or incidents for the most part. As my original Droid was starting to act up I decided to jump on the X2 as it was just released. I understood that it was not going to initially come with Gingerbread and I said I would be patient for the update to come and hopefully it would bring a new level to the phone itself as well as solve some (if not all) of the issues. However, now that it is past my return date, and there is no update as of yet, I do require assistance.
Thanks in advance for any assistance or insight,
Tuan

Thanks for the replies everyone.
The responses I received over at the Moto forums said the same thing about the battery saver mode. However, I have had the same issue with the radios shutting off during the day while it is in "Nighttime savings mode" so I'm just thinking it's an oddball glitch with the phone's power management settings and clock. I have recently changed the battery mode to "Performance Mode" from Nighttime Savings" as I have the phone plugged into the charger at night anyways. I'm hoping that will take care of both my radio and gtalk issues.
@Wildman: I have heard the same thing about the GB update from a Verizon rep very recently myself. I am still going to hope for an update sometime in the near future, but I do recall the first update for my Original Droid was months down the line from the release day.
@Droiddude: Are you just cycling the power? Or are you actually doing physical battery pulls? If cycling the power works for you it would lessen the burden of pulling that Incipio case (Verizon Double Cover) off my phone every time to do battery pulls. It's a great case but wow it's a tight/snug fit.
@vereyezuhn: I understand that there are possible dead areas in which my main issue may occur. I even have a prepaid phone for the times I am in a Verizon dead zone. However, when my issue occurs, I will be in the same spot for a while. I will receive all my calls, miss one in the manner I have spoken, then receive the following calls normally (SMS/MMS does not seem to be affected either as I seem to receive all of those). This is why I have this specific issue. I have recently cleared the phone's cache partition as well as update the PRL using *228 option 2. We will see over time if this eliminates the issue or at least makes it much more rare.

STILL Error Code: 0x8004fd2b *I need help*

I am still receiving this error message... I searched for the Intellisync file on my computer and I do not have this file. I have uninstalled and reinstalled the desktop software, and this does not eliminate the error.
I really would like to get this resolved.
Thanks.
Katrina

I am not sure what you have tried. I ended up having the same issue a couple of times and have resolved it through what I recorded in the following link to another message:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
The last time I had to do this, I just had to open the file and resave it....each time, waiting another 45-60 minutes of sync time to find out where the next error occured.
hope this helps.

I HATE your new version - I want the OLD one back!! I have vision issues. I need HELP

This morning Firefox dowwnloaded its newest version 3.6.18, As a result, the display on my screen went from 100% to about 60% making it difficult for me to easily see the details. The same applies to all my bookmarks. I tried to download a previous version as I did the last time this happened without success. I need your help as I have vision issues. Previous versions allow3ed for full screen display at low resolution.

http://www.oldapps.com/firefox.php

Basic (?) IMovie to DVD issues...need Help

Guys I am simply trying to get IMovie projects, nothing too long or fancy, onto DVD that will play on consumer systems. ITs proving to be quite exciting, but not very successful.
I am using Toast (not IDVD), Panther, QuickTime 7Pro, and Imovie 3.03. It is my understanding that I should export DV Stream from IMovie and then Toast will convert it to DVD (mpeg2, is that correct?)
The problem is none of the export options seems to work, it just fizzles out and I get a message 'fail'. I've tried "Full Quality DV' under the Quicktime menu (BTW could this format meet my criteria, or would I then have to do some QuickTime magic...).
and I've also tried "Movie to DV Stream" which is under the Expert menu....and which BTW has its own
options like 'interlaced', DVC-Pro...etc.etc.)
Nothing I've tried works so far. Its only a one minute movie and I have plenty of RAM and free space.
Please, any ideas for the perfect Expert Export? Thanks...

I have not used Toast myself to make a video DVD, but I don't think you need to go to the trouble of exporting any sort of file. Instead simply open Toast, pick the appropriate tab, then take the .mov reference file from your iMovie project folder and drag and drop it into Toast. I think that is all you have to do. Have you looked in the Toast help files? I think they go over this a bit in there.
Also, many people experience trouble with QuickTime version 7 and Panther (10.3.9) so perhaps there lies some of your problems.
Patrick

My z10 battery still stucked at 95% . Need help ASAP .

Hi everyone, I'm facing a very frustrated moment in my Z10, my battery do stucked at 95% when ever it's charging. I've did the method by Jsanders ( remove battery while charging ) I've did that method roundly 2hours since yesterday, only sometimes it can be charged till 100% , but when I check About> hardware .. It's showing 98% and its not same, hmmm please please please help me out feeling so sad do I need to downgrade my OS maybe? Pleas please help me. Your time is much appreciated

Vincci, there is no need to start an entire new thread on the very same issue.
Your other thread: http://supportforums.blackberry.com/t5/BlackBerry-Z10/MY-Z10-BATTERY-WONT-FULLY-CHARGED-STOPPED-AT-8...
Remember what I posted in the other thread:
"Remember, those charge percentages are basically on an estimation of the software's interpretation of the charge level in the battery. That percentage is calculated from a number of items such as charge history, current power level of the battery and other things beyond me. What shows as a 90% charge could actually be 95%, or thereabouts."
The device OS will rememeber the battery ID of the battery and doing the process I outlined can and will reset the on-device battery meter. Just try it again in a day or so, and then again later.
But, the bottom line is that 95-98% is basically 100%. You're talking about battery charge estimations, not concrete amounts. This is not like filling a five gallon water bucket and only getting 4.5 gallons in.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ITunes Album art/possible meta data issue? Really need help

So ill try and break this down as simple as possible...
I moved all my music from my Windows PC to my brand new MacBook Pro. All the song info/album Art and everything matches just fine on my windows pc. However on my Mac when itunes downloads any artwork it puts in artwork from other albums and artists. When I click on the song up in the iTunes sidebar lists Artist/Songs from an entirely different album. I have tried fixing all Meta data and converted ID tags and matched everything perfectly to iTunes Store but it still things the artwork is for another artist and the sidebar diplays the same info. I have even cleared out my library and copied to an external and reimported but same issue. I dont want to sit here and fix every single artwork problem especially when the information to the album is literally word for word match in iTunes store.
My other fear is that if iTunes thinks some of my songs are completely different artists when iTunes Match rolls around my songs will not populate correctly?
Please any other ideas? Like I said the album meta data is 100% matched (Artist, Song, Genre, Year, tracks)

clever point...
jere7my wrote:
some album covers just aren't exactly square, particularly if the CDs are sold in cardboard flip-cases.
I deal with artwork in a more hap-hazzard way, but most of the time, i get SQUARE results...
Just Google the album title, then click the IMAGES tab. More times than not, I find the album cover in multiple sizes and about every time, at least one version that is truly square.
All i need to do then is click the image, then again at the top of the resulting Google page (to show just the image - out of it's surrounding page), then drag the image directly to the Album Artwork Placeholder in the GET INFO tab (that has already been opened on multiple items - the whole album).
Beavis2084

My IPod 4th doesnt not turn on when i plug in to charge it its still wont turn on i need help and the screen is black help please!!

ok last night i was ok and nothing happend to my ipod but, when in the morning just to cheack the time its off and i didntturn off the ipod so i thought if it out of battery ill charge it. then when i plug it in to an outlet it still wont turn on please help i tried everything how turn it on and such it still wont turn on help!!! Please!!!

Try here:
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store.

Still troubling issues on 6303c(need help)

Similar Messages

Maybe you are looking for