Still waiting for a response from Adobe regarding the post "Printing a pdf from a marked-up pdf".

Still waiting for a response from Adobe regarding the post "Printing a pdf from a marked-up pdf" dated 15 Dec 2012 9:20 AM.

Look everyone that comes here with a support problems has gone through all the normal channels, around and round in circles with no one seeming to be interested. They've called every phone number, every email address they can find. They have been put on hold and bounced fifty times to another operator only to be hung up on. If Adobe would bring back support to main land and have people that know what's going on instead of having people that people can barely understand read from scripts. Scripted information only applies about 10 % of the time. I'm just giving people an alternative. after they have torn their hair out going the normal route. If they had been able to get a solution they wouldn't be coming here for help.
There should be a forum set up just for people to air these issues and Adobe employees forced to man it. Then we wouldn't have to have such a Bad attitude. Right now Adobe's Support reputation is worse than Intuit's which did have the absolutely worse on the Planet. Now they are number 2.
You know it yourself that Adobe's support is absolutely worse than terible. However to prevent me from being banned from the forums I will simply will provide the adobecare email address from now on
So let's sweep it under the rug.

Similar Messages

I just got my iPhone yesterday. Everytime I try to download anything it keeps displaying "Your Apple ID has been disabled." and I do not know what to do. I sent off my e-mail to Apple last night and I am still waiting for a response.

I just got my iPhone 4 yesterday after having a Blackberry for 3 years. Everytime I try to download any type of application it keeps displaying "Your Apple ID has been disabled." Before activating my iPhone I downloaded the most recent iTunes. I even went back today I reset my password after some minor research made the suggestion. I sent an e-mail off to to Apple last night after their Apple tech was no help at all. He is the one that suggested the e-mail and that he could not help me. I am really frustrated at this point. I am hoping that someone will be able to help me out. I was extremely excited about getting my new iPhone 4 and now I am just over it! Help please!!!

USER-kswest wrote:
BTW I have gone to the "Contact iTunes Support" and do NOT get anywhere. That is why I am here!
You need to contact iTunes support and send an email by following the link I posted.
Simply going there does nothing.

FF28.0 (de): Though menu option "Offline" is checked, Firefox still waits for responses from online sites

I have own webpages and modify them locally on my notebook.
After having made changes, *before* uploading them to my webhost company, I use to have a look on them "locally".
To manage this, I check menu option : Datei -> Offline arbeiten (German version, in "en" probably File-> Offline)
This worked pretty fine for years, up to and including FF 27.0.1.
Now with FF28.0, though "Offline" is checked/activated, FireFox still waits for online answers and does NOT display my changed sites (residing on the hard disk).
What happened? Must I now use IE to test my website changes locally?

Using Work Offline would only work for web pages that you have visited and that are in the disk cache.<br />
You can't use this to display web pages that are modified locally for testing.<br />
To do that properly you would have to access them via a local server that is running on your computer.

Firefox freezes about five seconds after I open it, and whenever I use Ctrl+alt+delete to close it I get told that it is waiting for a response from me.

I am having a problem with Firefox. Whenever I open it, it runs fine for about five seconds and then freezes. A small white rectangle appears in the upper left corner of the browser window. The screen still scrolls fine, but whenever I try clicking on anything (including the menus in the toolbar), it just gives me an unresponsive 'ding' sound. When I try closing the programme with Ctrl+alt+delete, I get a message saying 'The system cannot end this programme as it is waiting for a response from you'. I originally had this problem with an earlier version of Firefox and tried installing Firefox 4 to see if this helped. It worked for two days and began doing it again. I have already tried un- and re-installing Firefox and restarting my computer, and Firefox will not run properly for long enough to let me disable any add-ons or plug-ins. What can I do to fix this?
I've added a couple of screencaps of the problem. (or tried to)
[http://i53.tinypic.com/161hvh2.jpg The white rectangle]
[http://i51.tinypic.com/dwsq1.png Error message]

Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

I am still waiting for my student approval to set up the Adobe creative suite. Can you please help?

I am still waiting for my student approval to set up the Adobe creative suite. Can you please help?
Jasper

Why are you asking this in the Adobe Reader forum?
Best contact Adobe Customer Support.

For some reason my video just says, "waiting for a response from _____"?

For some reason the video chat doesnt even read that the other person has accepted the chat? I know the person who I am trying to video chat has no problem connecting with other people. Help please?

HI,
iChat 2 through to iChat 6 then Messages beta in Lion and Messages full app in Mountain Lion can do Video chats.
I have an older G4/1ghz Dual Processor computer booted in to OS X 10.4.11 and iChat 3.1.9
I have issues with Messages trying to Invite the iChat 3.x.x machine.
It's video chat window does the same as yours, stating it is " Waiting for a response from xxxx"
However no Visible invite ever appears on the iChat 3. computer.
On the other hand I can invite from iChat 3 to Messages and make a connection.
I am not having a issue from Snow Leopard (iChat 5) to Messages in Mountain Lion.
I had based my first reply on the Question
For some reason the video chat doesn't even read that the other person has accepted the chat?
(i.e. nothing about the computers involved).
From the newest MacBook Pro (not retina) to the new MacBook Pro (not retina).
This bit in your latest reply does really tell me where you bought them and what was installed when you got them and what is Installed now.
Some people have described problems on Lion machines after installing the latest Apple Remote Desktop Client
(Everyone has Apple Remote Desktop Client on their System and it is used with iChat in iChat Screen Sharing - it provides the Engine as it were. It also does the Screen Sharing within the Finder as well as providing one end of the Apple Remote Desktop help)
As a starting point I would go to the app's menu > Preferences > Video Section ans set the Bandwidth Limit on both machines to 500kbps
This can help if there are vast differences in Internet speeds at either end.
8:01 PM Tuesday; August 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

CCP related: A timeout occured waiting for a response from the ECU

Hello All,
            I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
       Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
    Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
-Lucky.

Hello,
          I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
I am sending you a link which gives you some insight about the installation of CCP command set and the use of the toolkit with the USB CAN hardware.
http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
Attachments:
can manual.pdf ‏1437 KB

Forbidden Screen - Error: "Still waiting for root device"

Greetings to all! I come to you with my boot troubles as a supplicant, in the hope that someone can help.
I have a PowerBook G4 15-inch, pre-Intel from late 2005. Until today it always worked and rarely hanged. All I've ever needed to do when in trouble was reboot. I've updated the Apple OSX software regularly and have never touched the hardware, except once 18 months ago to add memory. All I do with this machine is use it. It's been weeks since I installed any new software.
There were no warning signs before the problem started today.
FIRST SIGN OF TROUBLE: The machine was unusually slow, showing beach balls on every minor move. I powered down conventionally and later turned it on again. After a minute I got the "Forbidden Sign" grey screen, which I had never seen before. So I rebooted, and got that again.
+I turned to the only other available machine (very old PC, unfortunately) to browse for solutions, and have so far tried the following:+
1) BOOT FROM INSTALLATION DISK: Forbidden Screen. After a couple of attempts I removed the disk (by clicking trackpad on power up). At some point, in desperation, I even tried Disc 2.
2) RESET PRAM (Command-Option-P-R on power up) : I got three chimes, then the grey screen. It stayed on the apple and gear for many minutes. At least it never went to the Forbidden Screen.
3) FILE SYSTEM CHECK (Option-S on power up) : After a few steps it shows error messages (see below) and starts repeating, "Still waiting for root device," over and over.
4) RESET NVRAM (Command-Option-O-F on power up) : I got a blue screen with text and was able to input "reset-nvram" (response: OK) and then "boot." Result: Forbidden Screen.
5) SAFE START (Option on power up) : Forget it. Forbidden Screen. Same when I try it with "C" as some sites recommend. Same with or without the Install Disk in the DVD driver.
6) POWER MANAGEMENT UNIT RESET (Shift-Control-Option-Power): Subsequent boot still produces Forbidden Screen.
*THE ERROR MESSAGES*
Here are some of the messages when I start up with Option-S:
CSRHIDTransitionDriver::probe booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCKeyEventDriver" has no kernel dependency.
Apple PMU::CLOCK RESET! PMU WAS PROBABLY RESET SOMEHOW!! +(Yes, I did that, but it wasn't showing this before I did, and it WAS showing all of the following.)+
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from /chosen: +(I think the long code that follows is the serial number?)+
Waiting on <dict ID="o"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
PMUMS::start ERROR: failed to find IOATABlockStorageDriver
Still waiting for root device
Still waiting for root device
Still waiting for root device
+(etc. ad infinitum)+
*So now I'm begging anyone for answers to these questions:*
Am I doomed?
Does anyone know what the problem is?
This seems to be happening prior to disk access, as it happens with or without the Install Disk. So do I still have the hard drive working? Is my data on it?!
Was resetting the Power Management Unit a bad idea?
What can I do next?
THANK YOU THANK YOU THANK YOU!
Nicholas from NYC

Thanks for your reply, Louie!
In the meantime I have succeeded in booting via the Install Disc using Option on power up. The Hardware test shows nada wrong. Disk Util repair goes up to "Rebuilding Category B-Tree" and then fails. Frustratingly, the HD is somehow visible, because the diagnostics correctly identify it and give correct values for empty space. Right now I'm running the Erase Free Space option and it's working - how is that possible? I've gotten into Single User mode and tried various FSCK commands. Sometimes it comes back with the superblock error and "Bad Magic Number" which I believe indicates a corrupted block within the boot sector. I can't figure out how to reassign without reformatting and losing the data. This will cost me a few weeks of data, but really not that much work - still set me back by days.
Next step will be to start taking it apart, as you suggest, starting with the easy matter of trying with just one DIMM or switching the DIMMs.
Thanks again, and if anyone knows how to help - how does one reassign a superblock from the Single User mode?

Really poor customer service - still waiting for B...

Just a quick post to see if a moderator could help me…or as a last attempt for BT to at least acknowledge my recent complaint (or apologize).
I’d be interested to hear if other users have had similar problems (to any one of mine as it crosses different forum topics)…
I’d like to think I’m writing as an objective and reasonable customer and a loyal customer at that. Suffice it to say, in this competitive marketplace, I’ve not been impressed with BT in the last 3 months.
My automated email complaints response is 110110-007990 (if that helps).
Given my numerous attempts to make contact with the BT customer services team; I am doubtful that I shall receive the courtesy of a reply. I do not intend to repeat my complaint in detail here but in a nutshell, following the home move team promising various things such as:
1) a waiver of the line installation charge if I continue a full service package (which I gather is £127.99 for flicking a switch at the exchange);
2) a reduction in my billing generally (as I was “out of contract” for around 6 months so I was paying a DD around £65 p.m for line rental, basic phone, Broadband opt 2 and basic BT vision);
3) an expedited home move switchover within days (not weeks).
However, none of this happened and like many recent posts my billing has gone crazy. To cut a long story short BT have renegaded on all the promises made and the switchover service has been, at best, terrible.
1) I was in fact billed for an install plus delivery charges (£8.98) for a superfluous BT home hub and BT vision box (which never turned up).
2) My bills (and DD) have risen to a level which I simply cannot fathom as the BT invoicing system requires a degree in accounting to understand.
3) And after ordering on the 3rd December, I’m still waiting for my broadband activation after the phone line was only activated late last week. (To add insult I was told that an engineer would call (so took a day off to also receive the broadband kit) and allow access if required but it was cancelled and rescheduled twice). Now hoping for the 18th Jan – 37 days after ordering – woohoo.
I’m now seriously thinking of leaving …. There’s no incentive for me to stay now I’ve been charged and that charges have increased beyond the VAT increase. I suppose one customer like me will not make a difference to the BT annual report, but if my experience is typical of how customers are treated; if I were a BT shareholder I would be worried.
Solved!
Go to Solution.

Cheers. for the first 6 months it was a locked ip profile, always reset after phoning bangalor and speaking to the "have you reset your router" robots. for a few hours or a day or more, I'd get 2-3mbps then crash, back down to 135kbps. The mods here (after first banning me for reposting what they had mailed me) were quite helpful, I think they were/are frustrated that there is little they can do for genuine line quality problems, the ones that will cost money/time/effort to sort. Actually time and effort didnt seem to be a problem, I had no end of openreach blokes come to the house, sometimes 2 came at once, all with the same stories of woe, trackers in their vans, being sent out on useless jobs they had already reported were down to line faults/quality but being sent out again and again. And not just to me, I had the same guy just a couple of times but all were routinely demoralised with some kind of deep routed hatred for their managers that due to the trackers were now able to see where they were at any time.
bonkers mate, like I care what they think of their manager. at first when i mentioned the problem with using the broadband and phone together, there seemed to be some interest but when the problem was confirmed, the umbrellas came up, broadband said it was the lline, the line people said it was the broadband. line people also said when they test, the bb will be unplugged and if there is no fault, i will have to pay 130-ish quid. thing is the phone works ok without the bb plugged in. i tried everything, new adsl socket, standing on one leg, the lot. then got a capped 500kbps rate for option2. at least then i didnt get back to 135kbps everyday.
i signed a new contract in november, god knows why, Im now buying myself out of it.
there's one born everyday eh?
if bt were really interested in helping they would send out a smart person that would try and figure out why my neighbour gets 3mbps and i get 500kbps at a capped rate and 135kbps at the adaptive rate technology has done its business on my connection. I've had 3 routers sent to me, Ive bought a netgear all were no help. Its the line bt!!!! somewhere there is a fault. yes im far from the exchange, so is the guy next door!

Notification from Adobe regarding Flash Player Updates

Hello,
I work with a county wide non profit library system and we seem to have issues every so often with bringing up websites that use Adobe Flash to run their video player and game functionalities within the websites. I've contacted Adobe to try and find out if there's any way at all that we could get on an email Distribution list to notify us everytime the Flash Player application plug-in for the web gets updated. This would give us a "heads-up" pro active approach to this issue and allow us to serve our patrons more efficiently and effectively rather than waiting till we get complaints that our PCs aren't running Flash on them when we know that we are and the build just isn't the same.
Any Help would be appreciated.
Mike

please ban this spammer:
seninlebiromur.com
-----Original Message-----
From: seninlebiromur.com [mailto:[email protected]]
Sent: Friday, May 28, 2010 12:30 PM
To: Subject: [Flash Player] Notification from Adobe regarding Flash Player Updates
Thanks http://www.seninlebiromur.com
This message was sent to: indianamichael
To post a reply to the thread message, either reply to this email or visit the message page:
http://forums.adobe.com/message/2850085#2850085
--end--

5 months + and still waiting for a phone line

27/05/2013 Placed order for line and broadband. Paid for 1 year service in advance.
This was to reconnect a line I had cancelled in in January as we started a major re-fit/renovation at our house and were out of it for 4 months. Transferred line to a new address at this time (different exchange)
18/06/2013 Engineer scheduled to visit. - Waited in for 6hours, no one turned up, no contact made
19/06/2013 No one got in touch. I telephoned. Problem with line. New appointment made for Monday 15 July 2013
15/07/2013 Engineer did not turn up, no contact made again after waiting in most of day.
16/07/2013 I called and told work on line not completed. They needed to do external work. Given assurance I would get a call on 21/07/2013 as work scheduled to be completed by then. It had been accelerated (had been told this before come to think of it)
21/07/13 No one called, again
22/07/2013 I called and told work still not completed but would be by 25/07/2013 so to call back and arrange an engineer visit appointment
25/07/2013 I called , told work still not completed, would get a call by 29/07/2013 when work will be completed – to arrange another engineer visit. I filed online complaint
29/07/2013 no call. I called, no update, call again in 2 weeks
Numerous calls in August, and 2 online complaints. Now getting texts telling me there is no update and promising to get in touch by a certain date, they don't. New line needed as exchange reached capacity. Old line no good, have to lay a new one. Still being told order will be accelerated. Still waiting for the "advisor in our delays team to monitor the job and contact the engineers for a full investigation to be done so we can provide you with an accurate update."
Still more calls in September along with numerous calls (me) and 2 from BT to say they have no update!
Still being told the biggest load of rubbish as an excuse, eg me "but I had an active line in January" you "ah that is openreaches fault, they come and physically rip out and remove the wiring if a line is cancelled" or: BT- "we cant talk to openreach ourselves, we can only email them" me - "that's funny as your colleague on the last call claimed to have spoken
with them after leaving me on hold for 5 minutes"
October. Called today. ( now have a telephone number with a PIN number) Still no progress. They started digging on September 5th according to one email. I asked were they using a tea spoon, they even replied in email NO!
What am I supposed to do now. I am to get an update "tomorrow", but going by all previous updates it will be we will call again in 10 days - the don't. Time spent waiting for engineers - 2 days, time spent on phone/emails etc - 5+ hours.

Hi MCM66,
Thanks for posting and welcome to the community!
Sorry for the problems you've had getting services reconnected. Hopefully the renovations were well worth it!
I can help sort everything out from here. Click on my username and under the section "about me" you'll see the link to "contact the mods".
Whenever we've received your details we'll take it from there.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Single User Mode: Still waiting for root device

iMac G4.
I reset the NVRAM, PRAM. It won't attempt to boot from anything but a OS 10.4 cd; booting from OS 9 cd just leaves me at the flashing question mark icon.
If I try to boot from OS X cd, it comes back with the prohibitory sign.
If I try to boot into single user mode, it gives me a bunch of "...."has no kernal dependency lines, then a 'still waiting for root device' line, and repeats that.
Something to the effect before the 'still waiting for root device' is "Waiting on <dict ID="0"><key>IOProvider-Class</key><string ID="1">IOResouces</string><key>IOResouceMatch></key><string ID="2">boot-uuid-media</string></dict>"
Any help please?

Nevermind...I found out that the hard drive was bad...still puzzles me why it wouldn't boot from CD though, as I thought they all should even if no drive is present.

10.6.8 Netboot - "Still waiting for root device"

Hi all,
I am having trouble with one particular 10.6.8 Netboot image that is hosted on a Mac Pro running 10.5.8 Server. (The main 10.5.8 Server is currently hosting about 15 other Netboot and Netrestore images that work with no problem.) I built the image on a 10.6.8 Server using System Image Utility from a fully updated 10.6.8 restore image on an external hard drive. The external drive was started up on MacBook, MacBook Pro, and iMac systems ranging from Late '06 to Early '11 revisions. Software update was run on every startup, but came back fully up-to-date every time and never encountered problems starting up each from the external drive.
I then ran Disk Utility permissions repair on the external drive from the 10.6.8 Server Mac Pro and built the Netboot image in System Image Utility. Although I am fairly new to this process, I have already successfully built several 10.6.8, 10.7.5, 10.8.5, and 10.9 Netrestore images as well as one 10.9 diagnostic Netboot that all work perfectly. I followed the same process when creating the 10.6.8 Netboot image.
The image I created, called 10.6.8 Diags 3.0, shows up in the Netboot list, but when I attempt to boot it shows the Apple logo for a bit before showing the "circle slash" symbol. Verbose mode shows that it hangs when starting and repeats "Still waiting for root device" over and over again and never does anything.
I have rebuilt the 10.6.8 Diags 3.0 Netboot image several times to rule out the possibility of corruption durring image creation. I have also tried to create the image from a Firewire attached external drive as well as building the data on the external drive into a .dmg on the 10.6.8 Server and then creating the image from that. All methods of creating the image yeild the same "Still waiting for root device" error when attempting to start up on any system supporting the 10.6.8 kernel.
Netboot settings in Server Admin are the same as other Netboot images that are functioning: enabled, diskless, Intel (grayed out), and NFS. I have verified that all enabled image index numbers are unique and even tried several different index numbers on the problem Neboot image.
Again, all other Netrestore images I created on the same 10.6.8 Server work just fine when added to the Netboot directory on the 10.5.8 Main Server, but the Netboot image of 10.6.8 Diags 3.0 does not. I'm not sure what else to try at this point, any ideas?

Ooooh. I've been reading similar pages on cidori.org and just assumed it was one of those. Remarkable how my google searches didn't find that one. Thanks for the pointer, and I'll go try it.
Thanks again, Dan.

HT1577 how do a get a refund on a ridiculously slow downloading rented movie for my apple tv dispite a 5mb/sec down load speed? my first experience with appletv movie rental. no good. rented at 4:30pm. still waiting for standard def movie to finish at 8:1

how do a get a refund on a ridiculously slow downloading rented movie for my apple tv dispite a >5mb/sec down load speed? my first experience with appletv movie rental. no good. rented at 4:30pm. still waiting for standard def movie to finish at 8:10pm. Not good enough.

Thanks for the pointers folks. Yeah, 1.5GB is pretty poor isn't it? There are other suppliers, but you have to get a their phone line installed to access the internet so it's an £85 setup fee plus a day off work for a guy to come round and drill a hole in your wall before you even get to the monthly costs.
Don't get me wrong though - I'm certainly not an Apple basher, but am equally frustrated with both them and the ISP.
Virgin Media spend all kinds of money advertising their broadband as the fastest in the UK, but don't tell you (up front anyway) that you'll be cut off if you actually try and use it.
Apple on the other hand carry on with their 'it just works' mantra, but with Apple TV this only applies if you meet certain criteria (again, not mentioned up front).
I guess it aint a biggie, as i was gifted my Apple TV, and love all the other stuff it does, but from the number of posts on this forum can see that there's a lot of angry customers out there who want explanations as to why they're having similar problems to me.
Will be very interesting to see if Apple release any kind of software update that turns the flash drive from a buffer to permanent storage, to at least ease some of the pain...
Message was edited by: McGinty

IBook is not starting up - "still waiting for root device"

The 600 MHz / 640 MB / 20 GB iBook did not want to wake up and after forced shutdown would not start up. grey screen. With MacOS X CD - "prohibition sign", MacOs 9 - no start at all
I had 2 partitions on the HD one with Tiger and other with 9.2.2 - none of them appear in the list of startUp folders. would not go into the Target mode.
I know there are few threads here with similar problem - I went through them but nothing of the suggestions would help.
Did reset the PRAM (only once though) - when I still heard the startUp chime
Did reset PMU
Left the machine unplugged for about 12 hours
Now I managed to get into single user mode while attempting to start up from a Tiger DVD. Here is what I see on the screen:
"using 1638 buffer headers and 1638 cluster IO headers
Extension "com.apple.driver.AppleTexas2Audio" has no kernel dependency.
(then there are 14 extensions listed that has no kernel dependency)
Firewire (OHCI) Apple ID 30 built-in now active, GUID 000393ff fe6ce976; max speed s400.
ADB present: 8c
ApplePMU: CLOCK RESET! PMU WAS PROBABLY RESET SOMEHOW!!
Security auditing service present
BSM auditing present
disabled
rooting via boot-uuid from / chosen: 7FF85 (a lot of symbols)
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1"><IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Still waiting for root device
still waiting for root device
and so on with "still waiting..." again and again
also I did not hear start up sound anymore. Yesterday it was still audible.... can someone please help?!
iBook dual USB Mac OS X (10.4.5)

thanx for replying. Last night I finally managed to start up the machine using a FireWire ext HD as a StartUp Disk. Disk Utility and TechTool Pro and Disk Warrior are not showing the internal HD at all.
Since I was not able to use any start CDs including original MacOs X and 9 Cds maybe it is a problem with Data Cable that connects both HD and optical drive with logic board? It is hard to imagine why it would come to something like that. Overheat? I did not have enough free space on Tiger partition - 1GB. Maybe that. I am starting to look for a replacement HD....
iBook dual USB Mac OS X (10.4.5)

Still waiting for a response from Adobe regarding the post "Printing a pdf from a marked-up pdf".

Similar Messages

Maybe you are looking for