Still will not run on Vista using Forum suggestions
I tried the suggestions posted in the support forum but the NI design suite 10 still not running in my computer with Microsoft Vista OS. I remove and re-install the software by following NI engineers removal process sent via email and still not working. This is the error shown in the display -" NI Design Suite 10.0 has stopped working. A problem caused the program to stop working properly. Window will close the program and notify you if a solution is available."- Junt
Hi Junt:
I'm just checking to see if you were able to solve your problem? If you are still experiencing difficulty, some additional information would be helpful.
What version of Windows Vista are you running (eg. Home Basic)?
What language is your operating system?
What is your user name?
Does the error occur during startup, or sometime afterward?
If the error occurs during startup, do you get any other errors. For example, any errors about loading plugins? Can you see on the splash screen if Multisim has stopped after while loading a particular plugin?
Garret
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.
Similar Messages
-
I tunes still will not run on XP
I have tried all the tricks listed and still I-tunes will not run on relatively new windows XP, Dell machine (also newly purchased I-pod), - I have disabled virus protection, I have loaded most recent versions of i-tunes, I have cleared temp files and reloaded. I tried loading Q-time player as a stand alone. I deleted old folders of I-tunes and Q-time and reloaded. I-tunes down-loads without any error message, I-pod connects to USB and charges - and shows up as an "E" drive. But clicking on i-tunes icon, or loading audio disk or connecting I-pod all fail to visably launch i-tunes (nothing is seen in task manager after attempting to launch I-tunes - but on shut down of the computer I get the message that I-tunes is not responding and must be shut down manually). Already 10 hours spent on this
Hello DWTB,
Reboot your computer.
Then follow the steps in this article:
iTunes for Windows doesn't open after upgrading
Gary -
TS4123 After following ALL apple advise, iTunes store still will not run....
After exhausting all suggestions on the iTunes pages, I still can not get access to the iTunes store. All software is up to date & iTunes has been uninstalled & re-installed with no effect. All functions of the player are fine, but there is no access to the store or the updater. I have also used the "autoruns" program suggested with no help there either.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 RR789AA-ABA a1646x
iTunes 11.1.5.5
QuickTime 7.7.5
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B7580D97C400
Current user is an administrator.
The current local date and time is 2014-04-27 20:33:16.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.5.5 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {5A2E3825-CB3D-4C98-8F0F-1C98FA4AEE30}
Description: Intel(R) 82562V 10/100 Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Apr 27 13:27:38 2014
Lease Expires: Mon Apr 28 13:27:38 2014
DNS Servers: 209.18.47.61
209.18.47.62
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
An unknown error occurred (0x80096004).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-27 20:32:27.What happens when you try to open iTunes?
Does it just hang with iTunes.exe running i=on the processes tab in the Task manager even though it never opens?
If so here are a couple of simple things to try:
A couple of simple things to try:
XP
http://support.apple.com/kb/TS1776?viewlocale=en_US
Vista or Win7
http://support.apple.com/kb/TS2363?viewlocale=en_US
Stop the bonjour service, this FAQ has instructions:
http://support.apple.com/kb/HT2250?viewlocale=en_US
If stopping the Bonjour service works, it can be uninsatlled if you don't need what Bonjour does. -
ITunes latest up-date will not run on Vista 64 bit system
Downloaded and installed latest iTunes version Friday 21/1/14 but program would not run. Error message 'MSVCR80.Dll is missing. Repeat download.' Repeated downloads give the same message. Tried to uninstall and reload my original iTunes download from 2011 but that now gives the same error message. I'm running 64 bit Vista. Does anyone have a suggestion???
Hi, here are a couple of links that should help.
http://support.microsoft.com/kb/827218
http://kb2.adobe.com/cps/000/6b3af6c9.html
This one is the MS forum, sort of hard to follow, but the info is there.
http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/3c12694b-0e3d-417 e-bf3f-6ba53b9a8253
Hope these will help.
Thanks,
eidnolb -
System Restore will not run on Vista Home Premium
I cannot get system restore to run on my T61 using Vista Home Premium I get messages like:
"The Restore point could not be created for the following reason: The writer experienced a transient error. If the backup process is retried the error may not reoccur". It did.
I also get "Rescue and Recovery Backup Service stopped working and was closed. A problem caused the applicaion to stop working correctly. Windows will notify you if a solution is available." It did not.
I have also been advised no restore points are available.
The net effect is I cannot use System Restore at all!
Has anyone else had a problem like this with system restore? Lenovo has been no help.I have had a number of Dell computers and this is my first (and last) Lenovo. When it was quite new and the problem occurred , I contacted them but they just blew me off..
RHMSo i assume that your T61 originally came with Vista Home premium installed??? Did you make the Recovery Media disks when you first got your machine??? If not call Lenovo up and obtain those disks, and then use them to reinstall your service partition and your OS.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
I had firefox 4 which worked fine and I downloadd 5 now neither will run and I have done the things it says in help
I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there. -
Java 6 update 3 not running with Vista
Previously I have had not problems with getting Java applets to work, but I just got a new computer with a Vista operating system and I cannot get any applets to work. I tried uninstalling and reinstalling the lastest JRE from Java's website many times. I also went through their help and made sure the configureations matched that of IE7 which I am using. I have tried older version and even update 4, but I cannot even get the java test machine to work. There is just a red X that eventually shows up after a long wait. Currently, I have update JRE 6 update 4. I have not made any major changes to my computer as it is only a few days old, so I figure that it must be something that is not compatible with Vista. Below is what my Java Console reads after it fails to run when I test my VM on Java's website at http://www.java.com/en/download/help/testvm.xml :
load: class testvmDynamicJavaCom.class not found.
java.lang.ClassNotFoundException: testvmDynamicJavaCom.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 moreI have a similar post on this subject goto "gordon freeman" java 1.6.0_06 will not run in Vista.
On my system there is a workaround if you open control panel/user accounts, then turn user account control on or off, untick user acccount control and restart the machine then goto website www.javatester.com to test if appelets run! I leave user account control on until I have to goto java website and then disable visit site and then renable this requires 2 restarts everytime I visit a java site. The problem is some sort of permissions issue created by either corruption of the registry by remnants of previous versions or configurations of previous versions it goint ot take me years to work it out. None of the turkeys at Sun have got any idea how to fix this I now am working with Microsoft in an effort to have this problem fixed! -
Downloaded Flash Player yet it still will not work.
I have downloaded and installed the latest flash player onto my brand new macbook air, yet it still will not allow me to use flash player. When i go to say watch a video on youtube it says that I do not have the latest version of flash player and will not allow me to watch videos because of this. I have tried all the trouble shooting pages and I still do not understand and cannot get it to work. Please please help, this is infuriating.
What version does it tell you that you have installed at http://helpx.adobe.com/flash-player.html ?
-
the firefox set 7.01 up file can be downloaded but will not run do I have to update to 4 the 5 up to 7?
download run setup
unable too run setup everytimeThe longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is. -
I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?
I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner -
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update serverTry this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP
Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H. -
Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
the differences between os operations & dlls loaded but am unable to find the OS issue.
Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?You must provide the exact name and version of the software for anyone to attempt to answer your question. Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
Maybe you are looking for
-
SMS: unable to open. message format not supported...
hey folks i've seen a bunch of guys asking this same question on another threads with no reply, is this a OS bug or something? from time to time i received SMS from my contacts and sometimes I am not able to open them and i got a message: "unable to
-
I'm getting an " application" cannot be downloaded at this time message. With any app I try to download/update. Why is this happening and what can I do about it ?
-
Hi all, I am compressing with my favorite group of presets, and am suddenly getting a strange error. Three of the presets suddenly fail the compression and I get an error in the batch monitor that says (in red) "3x crash service down". I have no idea
-
Need to download/update iPhone to new computer.
My old iMac has a full disk. I bought second, used iMac, also running 10.5.8, which I want to use to upgrade my iPhone 4. I saved all apps and purchased iTunes to the newer computer, but when I tried to download & upgrade I am getting the message tha
-
Dear Gurus, I am new to EBS can somebody help how get the following error resolved: When I go to http://vpcss.virtualprofessionals.com:8000/OA_HTML/AppsLocalLogin.jsp link it doesn't show the login screen and just hangs up at wating for reply. Your h