Still won't recognize my ipod after the itunes update and iso

Just updated the Ipod so the ISO is upto date but still won't be recognized by iTunes.

Hey SnowbaII!
Here is an article that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

Hi jandroantonio,
Welcome to Apple Support Communities.
It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

I did the iTunes update and now I am getting a Windows error 126 message.

I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99606)

I tried to download the itunes update and at first it would say i was missing msvcr80.dl so I completely uninstalled itunes and its components, then reinstalled it. Now it says I'm missing"Applle Application Support" How do I fix this?

I tried to download the itunes update and at first it would say i was missing msvcr80.dl so I completely uninstalled itunes and its components, then reinstalled it. Now it says I'm missing"Applle Application Support" How do I fix this?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

ITunes still won't recognize my iPhone after I've followed every step

I purchased an iPhone4 off of a friend, he had completely restored it back to its factory settings before he sold it to me.
When I connected it to my iTunes it had asked to update it, so I did to 6.1.3. Now Every time I plug it into my computer it asks me to restore it, I click restore and it says it's updating, takes 4 hours then says there was an error. I've googled this and gone through all the steps and nothing is working. My iTunes still won't recognize my iPhone.
I had tried it on my brothers iTunes and it says "pairing record missing"
I also looked that up, followed all the different steps and nothing helped.
I've tried updating my iTunes, every time I try it crashes and says it "failed to install". nothing at all is working and I'm getting very frustrated and losing my faith in apple...
If anyone has any other idea, or advice, PLEASE let me know. it would be greatly appreciate.
Thank you
btw: I've tried the unplugging, rebooting, bluetoothing, everything I saw in the other forums and nothing helped.

why would your be frustrated and losing your faith with Apple? Sounds like your friend sold you a jailbroken phone.

Why can't I access the songs on my ipod after the software update?

I own three ipods (60G video, 30G video, and 4g mini) which I load on three different computers. I manually update them. I load music from my CD collection and they eacg have different music on them. The 30G was a recent purchase (used) and the first time that I hooked it up it required that I update my software (I have only done this on one of my computers). After the update, when the Ipod loads, the itunes shows the number of songs on the ipod but will not display the actual songs. None of the songs on the ipod are in any of my existing libraries as I tend to clear the librarries after loading the songs so that i do not fill up my computers with this stuff. Is there some setting that I should change to be able to view and modify these old songs on my Ipod short of blowing them all out and starting AGAIN? My Ipod video probably has 8,000 songs on it so I am not thrilled about starting again. Also, i can no longer play them through my computer because it will not pull up the list. Any advice would be appeciated. Thanks

Such a simple fix. I really did look at a lot of reference stuff to find the answer but could not.
true story ... back in the day, it took me about 20-30 minutes of quiet desperation to work out what the new rules for this were with the 7.0.x versions ...
i defer to Zevoneer when it comes to recovering music off an ipod. his post here may be of some assistance:
http://discussions.apple.com/thread.jspa?messageID=3741395#3741395

HT4623 How do you get your phone to work again after the iTunes update?

I did an update on my iPhone from iTunes and now the I only have one screen on my phone that has a picture of the iTunes app and the USB cord. I have plugged and unplugged my phone. I have tried to turn it off. I have turned off my computer, but I only get the same screen. What can I do to get my phone to work properly again?

That app should have a video on how to do that. IF not look at their support site.

How I "fixed" my iPod after the latest update screwed everything up

I am not sure if this will help anyone but here is what I have been through and done. I also don't know if this "fix" will last. So far it has been 24 hours and my iPod still works. To be honest I was surprised anything worked since this whole fiasco started. Good Luck!
(Please know I am not telling you to do this, just letting you know what I did and what happened. I have no idea if the slap to the hand actually did any good or if it is all just coincidence.)
After installing the latest iPod updater my iTunes would not recognize my iPod and when connected to the pc the iPod would simple flash do not disconnect. This would not stop no matter what I did. Once I removed the iPod from the pc sometimes it would go to the menu and have music on it and other times it would not have music on it. On some occasions I would get the folder with the exclamation point. I did try to reformat the drive through the pc and/or restore it through the updater but since it kept flashing do not disconnect the updater could not "mount" the iPod and the pc was never able to access the drive. At one point I was able to access the drive and reformat it but it said it could not finish the formatting. After three days of trying to do all of these steps over and over I finally put in a ticket to have it repaired by Apple.
I did reinstall iTunes to its latest update but kept the updater at the version that originally came with the iPod on the Cd.
Which leads me to the final step. I had heard that other folks had slapped the iPod against their hands and suddenly they would work again. So I figured, at this point, what do I have to lose? (Please know I am not telling you to do this, just letting you know what I did and what happened. I have no idea if the slap to the hand actually did any good or if it is all just coincidence.) I plugged the iPod in and watched it flash its message to do not disconnect, I reset it and then forced it to say do not disconnect, then quickly disconnected it. Once removed I slapped the side of the iPod against the palm of my hand. The drive did spin up and the picture which tells you to plug the iPod into the wall appeared, which I did. It showed the apple logo, a status bar ran and then went to the menu and reset itself.
I connected the iPod to the pc with the current iTunes program, old iPod updater version, with my playlists and library intact and it started to update the iPod with my library and playlists. Once finished I manually disconnected the iPod and safely removed the hardware.
So far it works fine. I used it at home and in my car. I have not tried to use the new updater again. Honestly I fear what would happen.
Dell Windows XP Pro iPod 3rd Gen 40Gig

Hi Zmajev,
If you are having syncing issues after an update to iTunes 11.2.2.5, you may want to try updating to the most recent version (iTunes 11.3, which was just released yesterday) and see if the issues still persist. You may find the following article helpful:
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
Regards,
- Brenden

I think my battery is fried. It gets really hot sometimes when I charge it now it won't charge at all. It froze up after the last update and I can't use it at all.

My phone froze up after last update and I can't use it at all. I think the battery is fried as well. It gets really hot sometimes when I charge it and now it won't charge at all.

Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds of holding both buttons. If still nothing try Reset while on Wall Charger, this can take about 20 seconds of holding both buttons while on Charger. If still nothing and you decide to Restore you iPhone with iTunes on computer, you may need to use DFU Mode Restore. Here are steps: Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode.

I cannot sync or edit my iPod after the latest update!

After the latest iTunes update 11.2.2.5, I can no longer add new songs or playlists to my iPod! Is this a new revamp of how syncing works, or is my installation faulty?
I can no longer see the playlists on my iPod through iTunes. If I want to add a new song, one or many, or add a playlist, it asks me to remove all my songs on the iPod.
Even so, it refuses to let me add one song at a time, nor will it let me create playlists unique to my iPod. I have to create the playlist on my PC, and then sync it to my iPod. If I delete the playlist from my PC, it will also delete it from my iPod. I do have 'manually sync' turned on.

Hi Zmajev,
If you are having syncing issues after an update to iTunes 11.2.2.5, you may want to try updating to the most recent version (iTunes 11.3, which was just released yesterday) and see if the issues still persist. You may find the following article helpful:
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
Regards,
- Brenden

Why won't my iPhone work after latest iTunes update on Windows XP?

Not the most technically savy guy. Tried to sync my iPhone on my computer like I have plenty of other times before, but got a warning message saying that the hardware that I was attempting to install has not been verified through Windows XP (or something to that effect). Now, my iPhone will not work. The screen only shows the USB icon and iTunes icon with arrow in between signaling to connect to iTunes.... it is already connected to my computer!

I have a trick to resolve this problem ; uninstall all programs which make up itune such as iTunes,Apple Application Support ,Apple Mobile Device Support ,Apple Software Update and Bonjour. After uninstalling those programs,download and reinstall the current version iTunes. It can help you to sync your iphone with iTune.

Can't copy podcast to Ipod after latest Itunes update

I have an Ipod Nano. I just recently updated Itunes with whatever the latest update was. I subscribe to several podcasts and I downloaded the latest episodes. When I went to copy the latest episodes to my Ipod, an error message popped up telling me that the podcasts could not be copied to my Ipod because they couldn't be played on my Ipod. Why am I having this issue?

On your iPod, go to the Video menu, then go to your video settings and turn TV to Always Ask or off.

Tried the itunes update and it did not download properly. Now I get an error 7 message and also a msvcr80.dll missing message. help?

I tried to download the last itunes update 1/22/14 and it did not download correctly. I can't access itunes at all. Tried to uninstall and download from website but I get error 7 (Windows 126) message and also msvcr80.dll is missing from your computer message.
any ideas?

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

HT2292 After the Itunes update my ipod nano is not being recognised by the computer or Itunes.

It says and ipod has been detected but it could not be identified properly. I have tried all the solutions on the website but nothing is working since the update

I have tried all the solutions on the website but nothing is working since the update
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Still won't recognize my ipod after the itunes update and iso

Similar Messages

Maybe you are looking for