Stills in the Palette
I have over 5000 photos in iPhoto. Does DVD Studio Pro have a hard time processing this many photos. I am asking this because when I open up the palette and click on stills, the program basically stalls. It can't seem to open up all of the thumbnails and this in turn seems to induce stalls in the other tabs within the Palette.
I believe that DVD Studio Pro cannot process stills in the Palette when iPhoto has nested folders. It works fine when I just click on library (with greater than 5000 photos - it just takes time). However, when I click on a folder which if have nested a couple of folders in (in iPhoto), the stills palette freezes.
Similar Messages
-
this is what the previous helped asked me to do, severely edited. then she told me to restart and i lost her.
You are now chatting with Firefox community member zzxc<br />
zzxc: Hello<br />
zzxc: Is it still in the add-ons tab/<br />
steve: hi. i dont see it. it usually is on the menu bar towards the left, at least before i did this upgrade<br />
steve: actually, i realize i dont know what an add-on tab loos like- previously it just floated between the "latest headlines" etc and the bookmark toolbar<br />
zzxc: look in Firefox->Addons<br />
steve: i'm on an imac osX snow leopard. i see add-ons under firefox>tools>addons, but when i click on that, nothing is opening<br />
zzxc: try going to about:addons in Firefox's address bar<br />
steve: if i understand, firefox>about just tells me that im using 8.0beta. the only place i see the word add-ons is under tools. unless im unclear about where you mean by firefox's address bar, which i'm thinking means the bar with my own bookmarks menu. the bar with the URL- i don't see anything on that like you describe.<br />
zzxc: ok - when you try to go to tools->addons, nothing happens?<br />
steve: it didnt my first 3 tries, and it opened a page which says: about:addons in the URL spot, and "add-ons manager" in the tab<br />
steve: just now opened that page<br />
steve: forgive my typing<br />
zzxc: ok - in there, look in Extensions. is downloadhelper enabled there?<br />
zzxc: (click it - you should see a disable button if it's enabled)<br />
steve: i assume it is enabled because the button there reads: disable"<br />
steve: btw, the i-click youtubedownloader and SpeakingFox say they’re incompatible with 8.0.<br />
zzxc: so it seems to be enabled<br />
zzxc: right click the toolbar and go to customize<br />
zzxc: see if the downloadhelper button is in the customize window<br />
steve: it's not there. the only addon there i recognize is Zotero<br />
zzxc: Do you see the downloadhelper logo on youtube video pages, to the left of the video title?<br />
zzxc: eg. look at http://www.youtube.com/watch?v=vpzUCA5i6zY<br />
zzxc: try with just downloadhelper enabled and no other add-ons enabled<br />
zzxc: other add-ons could be interfering with downloadhelper<br />
steve: ok i'll try that now- since the downloadhelper logo wasnt on the youtube page<br />
steve: ok. i disabled all except downloadhelper<br />
steve: but no downloadhelper logo appears anywhere on the toolbars or anywhere above<br />
zzxc: is there an error in Error Console about it?<br />
zzxc: command+shift+J on a mac<br />
steve: when i clicked on the errors tab, the window under it was blank<br />
zzxc: In Firefox, open the Firefox->Help menu and choose Troubleshooting Information. On the page that opens, click Copy all to clipboard. Finally, paste the clipboard into this chat by using CTRL+V. (You can also paste by right clicking and pressing paste)<br />
steve: ok thanks brb<br />
steve: hi zz. i clicked on COPY TO CLIPBD but it didnt do anything i could see. (is the clipboard something i find somewhere else? i am able to cut n paste that entire page if you want.<br />
zzxc: press CTRL+V in this chat<br />
zzxc: that should paste it here.Try:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
Hi, I am using Firefox 5. Suddenly I lost my bookmarks toolbar even though I have selected it to be visible in the view option. But I can still view the bookmarks toolbar in my all-in one side bar
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing -
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
I tried to ask a similar question before, however did not understand our issues well enough to even form a comprehensive question and the kind replies.
I apologize, unfortunately I've yet to resolve our problem.
All of our devices are under the same Apple ID & password (an IPhone 4s, an IPhone 4, and a Dell Laptop that uses Windows 7.) How in the world can
we separate them (so we can both use our free 5GB under the iCloud storage that each of our IPhone's offer, but "also" still use the same shared ITunes
account?
As it stands right now, my son's phone (iPhone 4) is set up under our Apple ID & pw-which enables him to use the free 5gb's under the iCloud.
I cannot take advantage of the Free 5gb's iCloud on my IPhone 4s, because it's all "my info." on my son's phone (my email address & pw=what we've always used for our shared ITunes acct.)
A big fat mess I know, and don't even want to confuse things by asking about these SMTP's...1 thing at a time!
Not sure if it is still on his phone, however in trying to resolve this issue last time I set him up with a MobileMe address. I believe I entered my info back into his phone because it created a bigger mess!
Thank you in advance for any suggestions/help! It's taken me some time to gather the patience and courage to ask for help again in resolved this
issue!I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!! -
DID YOU KNOW?? - ABOUT ADVANCED COMPONENTS IN THE PALETTE??
<br>
Hi All,
DID YOU KNOW??
The IDE ships with the following Advanced Components in the Palette.
These advanced components are a set of JavaServer Page markup tags for advanced users. The components have no visual appearance and are useful to developers with experience in JSP and JavaServer Faces technologies.
* Encoding
* Faces Action Listener
* Faces Converter
* Faces Validator
* Faces Value Change Listener
* Faces Verbatim
* Link
* Load Bundle
* Markup
* Meta
* Parameter
* Script
Lets look at MARKUP component in more detail.
The MARKUP Component
You can drag the Markup component Markup component icon from the Palette's Advanced category to the Visual Designer to create a standard HTML tag. The Markup component enables you to insert HTML elements into the JSP page in places that HTML is not permitted.
When you drop this component on a page in the Visual Designer, you cannot see it on the page until you set the tag property. You can see it in the Outline window and you can select it there to edit its properties in the Properties window.
Use the tag property to specify the type of HTML element to insert. For instance, to insert an <hr> tag, set the tag property to hr with no angle brackets and select the singleton property .
To provide compliance with XHTML, if the HTML element you are inserting is a singleton element, you must specify the singleton property, which causes a trailing /> to be generated in the rendered HTML. For example, the <br> element is a singleton element that must be rendered as
to make it XHTML compliant.
If you want to specify HTML attributes in addition to id and style for the element you are inserting, use the extraAttributes property.
Learn more :-
http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/help/2update1/components/advanced_list.html
We would like to know the following from you :-
1) Are you using these Advanced Components in applications you are building? If so How and Where?
2) Did you face any challenges while using them?
3) Did you find any special usages/scenarios for using these components?
Thanks for all your inputs and for joining in the discussion.
K
</br>What would you like in the documentation? Do you have specific questions about particular components? Do you want examples? What's missing from the online help at http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/help/2update1/components/advanced_list.html?
-
DID YOU KNOW?? - ABOUT DATAPROVIDER COMPONENTS IN THE PALETTE??
Hi All,
DID YOU KNOW??
Practically all applications entail accessing data of some sort, often data stored in a relational database table or some sort of list, such as a vector or an array. Usually you need to read in data from the data source, but many times you have to update that data, too. The Sun Java Studio Creator integrated development environment, as another enhancement to its application model, provides data provider components that simplify accessing data sources, regardless of whether the data source is a relational database table, flat file, web service, vector, array, or some other type of data store.
A data provider component is a nonvisual abstraction for wrapping sources of data, and it represents a more generic and flexible data binding mechanism. A glance at the Palette indicates that there are many different kinds of data providers available to you. These include data providers for cached RowSets, ResultSets, lists, arrays, maps, table rows, and method results.
These data providers constitute a layer between a web application's components and its persistence tier, such as a database table, Array object, or Enterprise JavaBean object. This layer enables you to access data in a consistent way, even though data may come from different sources.
Lets briefly discuss the CachedRowSetDataProvider
The CachedRowSetDataProvider Component
A CachedRowSetDataProvider is a wrapper to data held in a CachedRowSet. The primary purpose of a CachedRowSetDataProvider is to facilitate binding to components in the IDE. A CachedRowSet stores the data retrieved from a database. In fact, the only information held by the CachedRowSetDataProvider is a cursor position into the CachedRowSet. Multiple CachedRowSetDataProvider instances can reference the same CachedRowSet, and each instance will have its own cursor position into the CachedRowSet.
Learn more :-
Working With Data Providers
http://developers.sun.com/jscreator/learning/tutorials/2/dataproviders.html
Data Provider Components in Java Studio Creator
http://developers.sun.com/jscreator/reference/fi/2/data-providers.html
Using CachedRowSet and CachedRowSetDataProvider in the Sun Java Studio Creator IDE
http://developers.sun.com/jscreator/reference/techart/2/insert_row_in_table.html
We would like to know the following from you :-
1) Which of the DataProviders are you using in applications you are building? Also How and Where?
2) Did you face any challenges while using them?
3) Did you find any special usages/scenarios for using these components?
4) Do you have any feedback/comments/improvements which you would like to see with using Dataproviders?
Thank you for all your inputs and for joining in the discussion.
K.
-
my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!
Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081 -
I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.
jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen) -
OK, so I'm clearly a newb. I thought if I asked a question, it would post, and now I'm being told to post a comment, so I'm asking the same question again. Sorry I sound like an idiot. I'm new to this apple/mac stuff.
Why does iTunes/iPhone 4S insist it can't find a song on my PC or my phone when it is on both? This is resulting in me being unable to use the ringtones I created from these songs, but I can still play the songs.If you have added the ringtone file correctly to iTunes, it will appear under iTunes 'Tones' library.
If you don't find Tones library in iTunes, go to iTunes menu EDIT/PRFERENCES under GENERAL tab, check the Tones Box under Library source to display Tones library in iTunes.
iTunes accepts only m4r file as ringtone and has to be less than 40secs. -
Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?
I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well. -
I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.
I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.
-
I don't know what to do. My iPhone 4 just all of a sudden had a blank white screen. It still shows the bar at the top with the signal, time, and battery life. But the rest of the screen is white. If I touch the screen it acts like it's selecting something and gives me the choice to "Copy". It will still charge when I plug it up, but i cannot turn it off or lock the screen. I tried leaving it alone for awhile to see if it will lock on its own, like it normally would, and all it does is dim the screen. I guess im going to try to just let it die, and then see what happens, but if anyone else has any suggestions (other than taking it in to be looked at or getting a new phone) I would greatly appreciate it!
Any number of things could have caused the phone to do this. If after the reset you are experiencing additional problems, the next step in the troubleshooting process is a restore from a backup. Make sure you have one before you start the restore process. If that does not improve things, then you may have to restore as a new device. Remember, restoring as a new device will delete all data off the phone. Make sure all of your pictures are imported to the computer and all other data is synced to supported applications on the computer before restoring as new. See this support document about backups http://support.apple.com/kb/HT4946, and this about restoring the phone. http://support.apple.com/kb/HT1414
-
After iOS 8 update doesn't sign in my FaceTime and icloud email account keeps saying incorrect password even after putting right password
I have already tried reset option already still says the same incorrect Please HelpHi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian
-
4 voice memos in iTunes backup from iPhone had ! marks and would not play so I deleted them and although they are still on the iPhone, they will not sync back to iTunes from iPhone.
You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
Maybe you are looking for
-
Currently My scenario : File to XI to IDOC Based on the Employeenumber in the File I need to Group them as IDOC and then I need to send to the R/3 for further processing. This has been acheived with a simple BPM and its working fine now. I am hardco
-
i accidently clicked on an advertisement banner on the app formspring, and i am worried that the website the ad took me too may have a virus that will steal accounts from my ipod. i am using an ipod touch 4g
-
Another Problem with XI Lookup
Shame on me... I think I've read all of the topics regarding XI Lookups and still don't understand the whole thing: My need is: I have to read a SAP-Table to substitute a Value in my Mapping. So I have to create a Function in my SAP-System, which ich
-
Best way to export a 4:3 720x480 24p animation for DVD
We've been working on an animation for the past couple of months and it's the first one we've done. It's going to go onto a DVD and the project is 24fps progressive. The video looks extremely good in Premiere Pro, but when I export as an Mpeg2-DVD
-
Unix linebreaks with Windows UTL_FILE
Hi there, I have a problem writing linebreaks using the UTL_FILE package. Here's my code: utl_file.put_line (lv_file_handle, 'First row'); utl_file.put (lv_file_handle, 'Second row' || chr(10)); utl_file.put (lv_file_handle, 'Third row' || chr(13) ||