Stills not rendering

When I added the stills to 'Stage 1' project, they showed in the sequence with red bars over them, (opposed to the video clips which are yellow) and I'm assuming means they're not rendered? Why wouldn't they be? When I opened 'Stage 2' it showed the same thing, stills red/video yellow. I'm guessing it's my settings or something.. any help in regards to why this might be or how to fix it would be greatly appreciated.

jacqi_jones,
The imported stills need to be rendered because they (most likely) have a much higher resolution than the video footage and, therefore, sequence setting. I think one's system RAM and memory usage settings can determine what Premiere Pro needs to render after import, but I'm not sure. Anyway, it's not a big deal to simply render the sequence after importing still images. Some things to help you out:
This Help document discusses ways to prepare images for importing to minimize render time: Importing still images
This forum post covers the issue of resizing the imported stills for this tutorial so that they appear fully, not cropped: Sizing JPEGs
This video tutorial discusses: Why is there a red or yellow bar in my sequence?
For what it's worth, the red render bars appear when I open the Stage 2 file too:
Hope this helps!
Stefan

Similar Messages

Svg still not rendering

There have been a few topics about the svg import into Muse.
I'm still having trouble on my website design. I keep getting the error "unable to generate thumbnail" and when exported to the browser the image doesn't show up.
Would greatly appreciate any help!
Using:
Mac OSX 10.10.
Safari

Hi
in case you stil have this issue, please check this thread SVG files not rendering in Muse

Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
I noticed the following:
We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
No errors show in the log. IS THIS A BUG???????????????
UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
Edited by: user8333408 on Jul 7, 2011 9:23 AM
Edited by: user8333408 on Jul 7, 2011 9:24 AM
Edited by: user8333408 on Jul 7, 2011 10:08 AM

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

Adjustment Layer not rendering...

I have a fairly basic comp consisting of 3 or 4 3d layers spaced out along the Z axis, two precomps containing some edge lighting effects, a camera, a light, and the troublesome adjustment layer. The adjustment layer only contains some color correction and a flare. I thought perhaps a certain effect may be causing the layer not to render, but i eliminated that possibility by removing the effects i had and trying several other, the layer was still not rendering. I think I have exhausted all of the really simple solutions, nothing is solo'd, all the layers are visible in the preview, the layers are all in the correct order etc.. I can't SS the project right now as I am not at home, but i can tell you that I am working with CS5.5, on windows 8.1, i5 cpu, 8 gigs of ram. The really frustrating part is that a slightly earlier version of the project successfully rendered the adjustment layer and I don't remember changing anything major... Suggestions? Shots in the dark? Anything? I will post a SS later in the day. Thanks in advance to any and all who have advice.

No problem! Glad to help.
Don't forget to mark the solution as correct, so that future forum visitors see this thread as solved. Keep having fun with After Effects and let us help if you get stumped again.

FCPX sluggish, not rendering

I've been successfully editing a project in FCPX (latest version) for three weeks. Now, suddenly, it has become very slow and is no longer rendering. I've trashed the preferences, repaired the permissions, restarted, but nothing seems to help -- still slow, still not rendering. I have a 27" iMac with latest OS. My media files are on a separate hard drive. I should have plenty of memory. Why should this work just fine for weeks and then suddenly go South? I don't know what else to do and I'm heavy into editing an important project. Help!

I'm doing a project that involves a lot of stills with greenscreen, so basically the entire video is done with virtual backgrounds. This has worked fine -- the key is actually quite good. As I pointed out, I was zooming along doing very well with this, even succeeding in working with 4-5 layers of video. Then suddenly, two days ago, without me doing anything different, it got very sluggish and finally reached a point where it wouldn't render anything. It just sat. I've trashed the preferences, repaired the permissions, restarted, etc., I had even gone on line to get help and did everything they suggested (which was trash the preferences) and after our first session it actually worked better for a couple of hours. However, after rendering my work, the next day the same thing started all over again. I'm at the point now of having to work off the computer in my office, edit a little, burn a Quicktime movie, and place that on the time line in a new Event/Project, and move back and forth from home to work -- which, obviously is going to be a pain in the ***. I would just like a simple explanation of why it all of a sudden stopped working -- and what I can do to fix it.

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

Customization - Additional column inserted in Inbox - value not rendered

Hello,
   I have a requirement for customizing the inbox and populating the new inbox column with additional value. I made coding updates and everything looks good but the inbox does not render the new value at all. I made these updates and overrides.
Added the column name and value in \apps\cq\workflow\components\inbox\list\json.jsp . When I go to http://localhost:4502/libs/cq/workflow/content/inbox/list.json?_dc=1358787785033&start=0&l imit=40, I am able to see the addition variable and value added and displayed in list.json. For e.g. view of list.json
           "payloadPath": "/content/dam/geometrixx-outdoors/articles/a-simple-plan.jpg",
           "payloadPath_xss": "/content/dam/geometrixx-outdoors/articles/a-simple-plan.jpg",
           "payloadSummary": {
        "lifestage": "Authored",
           "payloadTitle": "a-simple-plan.jpg",
           "payloadType": "dam:Asset",
   2. Override and updated \apps\cq\workflow\extensions\inbox\cols. Added a new column, lifestage.js. Code in that js file is
    "header":CQ.I18n.getMessage("LifecycleStage"),
    dataIndex:"lifestage",
    ranking:30
    3. The inbox/list.json shows the value lifestage correctly. But still it doesnot populate 'lifestage' value in the inbox column. If I replace the dataIndex:"lifestage" with dataIndex:"currentassignee" or any other thing, the Lifestage column in Inbox is populated with the "CurrentAssignee".
Why is the lifestage value though visible through list.json not visible in Lifestage column? What else needs to be additionally done?
Thanks,

Sham,
     I followed exactly all steps like you mentioned. The value was not rendered. I put the alert messages. Please see the code below.
As lifestage is not subpart of payloadSummary, tried both record.get("lifestage") and (record.get("payloadSummary").lifestage but still both alerts shows undefined.I see alerts for 'Inside renderlifestage' but the next alert shows 'undefined'.
renderLifestage: function(value, p, record) {
            alert('Inside renderlifestage');
            alert(record.get("payloadSummary").lifestage);
            alert(record.get("lifestage"));
            return lifestageTpl.apply({
               "lifestage": record.get("payloadSummary").lifestage
Here is the output from inbox/list.json
      "item": "/etc/workflow/instances/2013-01-22/model_360104180212070/workItems/node4_etc_workflow_in stances_2013-01-22_model_360104180212070",
      "title": "Authorship Workflow",
      "description": "Select author for the authorship workflow.",
      "dialog": "/apps/lexmark/dialog/authorshipDueDateDialog",
      "participant": "",
      "currentAssignee": "Administrator",
      "startTime": 1358880950665,
      "metaData": {
        "workItem": {
          "historyEntryPath": "/etc/workflow/instances/2013-01-22/model_360104180212070/history/1358880950664"
        "instance": {
          "currentJobs": "",
          "currentJobs_xss": "",
          "workflowTitle": "authorship_workflow_test",
          "workflowTitle_xss": "authorship_workflow_test",
          "startComment": "authorship_workflow_test",
          "startComment_xss": "authorship_workflow_test"
      "payload": "/damadmin.html#/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payload_xss": "/damadmin.html#/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payloadPath": "/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payloadPath_xss": "/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payloadSummary": {
        "icon": "/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg/jcr:content/rend itions/cq5dam.thumbnail.48.48.png"
      "lifestage": "Authored",
      "payloadTitle": "downhill-ski-conditioning.jpg",
      "payloadType": "dam:Asset",
      "lastModifiedBy": "admin",
      "lastModified": 1323947520464,
      "lockedBy": "",
      "lockedBy": "",
      "timeUntilValid": 0,
      "onTime": 0,
      "offTime": 0,
      "monthlyHits": 0,
      "replication": {
        "numQueued": 0,
        "publishedBy": null
      "scheduledTasks": [
      "inWorkflow": true,
      "workflows": [{
          "model": "Authorship_Workflow",
          "started": 1358880950439,
          "startedBy": "admin",
          "suspended": false,
          "workItems": [{
              "item": "Authorship Workflow",
              "assignee": "admin"
      "scheduledTasks": [
      "comment": "authorship_workflow_test",
      "workflowTitle": "authorship_workflow_test",

PDF not rendering right in firefox

I have a PDF file I created on my website and noticed that in FF it is not rendering the images correctly (specifically the background image) The file renders fine in IE and Chrome but not in FF, which produces a lot of odd lines in some images and the background. I have had several people check this for me and they have the same problem, the PDF will just not show correctly in Firefox, even one person that tried it, FF will not show any pictures for her on the PDF. Did not know where to post this, as it is not really a question but an observation.
Shy

I am sure this is helpful for those that are computer savvy like myself, but most readers of my PDF newsletter on my site are not. So it will not help them much, heck I spent 10 mins. in chat last night explaining to them what a URL is, most still did not understand. I will pass the info on anyway just in case, telling them this is only a problem if they are a FF user, or that they can use IE or Chrome if they like so it renders correctly.
Thank you
<blockquote>
Hey Shyannes,
It is rendering differently because IE uses the Adobe reader plugin to display PDF's and Chrome uses a custom PDF viewer. Firefox also has a custom PDF viewer (different than both IE & Chrome).
Firefox users can view the PDF using Adobe reader by following these steps:
#Click on the Download button (the one to the right of the print button).
# Change it from Save file to Open with: '''Adobe Reader'''
#Click OK.
Hope that helps.
-Curtis
</blockquote>

Design view of jspx not rendering : Error exercising tag : afh:head

I'm using JDeveloper 10.1.3.4 and I have an intermittent problem where by the jspx does not render correctly in design view - it just shows a whole load of nested boxes.
By following a suggestion from another website I turned on "Design time messages in log" in jdeveloper JSP visual editor preferences.
The error messages being sent to the log window are :
Error exercising tag : afh:head
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.renderkit.AdfRenderingContext.getTranslatedString(AdfRenderingContext.java:70)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.jsLibs.GlobalVariablesScriptlet.outputScriptletContent(GlobalVariablesScriptlet.java:49)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.jsLibs.Scriptlet.outputScriptletImpl(Scriptlet.java:111)
Error exercising tag : af:forEach
javax.servlet.jsp.JspTagException: 'begin' and 'end' should be specified if 'items' is not specified
     at oracle.adfinternal.view.faces.taglib.ForEachTag._validateAttributes(ForEachTag.java:320)
     at oracle.adfinternal.view.faces.taglib.ForEachTag.doStartTag(ForEachTag.java:93)
Error exercising tag : afh:body
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.renderkit.core.CoreAdfRenderingContext.getStyleClass(CoreAdfRenderingContext.java:211)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.XhtmlRenderer.renderStyleClass(XhtmlRenderer.java:338)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer._renderLibraryDownloadElement(PanelPartialRootRenderer.java:480)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderPPRSupport(PanelPartialRootRenderer.java:340)
How can I fix this ?
Cheers,
Brent

Hi Didier,
Sorry, intermittent problem is not very descriptive ! What I actually meant is that some of my applications have the problem while others dont. Once the problem exists, it always does regardless of restarting JDeveloper.
Starting JDeveloper using the console provided similar error message to outputting the JSP visual editor to the log file :
SEVERE: Element End name:head does not match start name:script
04-Dec-2009 17:28:38 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElem
ent
SEVERE: Element End name:html does not match start name:div
Reading other posts, problems seemed to stem from errors within the faces-config or web.xml files so I compared them between apps displaying pages correctly and ones that weren't. I found a difference in the filter-mapping section of the web.xml. Changing the entries to match the applications that displayed correctly has worked !!
The entries for the apps that didn't display correctly :
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
        <dispatcher>FORWARD</dispatcher>
        <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jspx</url-pattern>
    </filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>ordDeliverMedia</servlet-name>
</filter-mapping>
<filter-mapping>
    <filter-name>jhsAuthenticationFilter</filter-name>
    <url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
    <filter-name>jhsAuthenticationFilter</filter-name>
    <url-pattern>*.jspx</url-pattern>
</filter-mapping>... and the entries for the apps that did display correctly :
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfFaces</filter-name>
        <url-pattern>*.jspx</url-pattern>
        <dispatcher>REQUEST</dispatcher>
        <dispatcher>FORWARD</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <url-pattern>*.jspx</url-pattern>
        <dispatcher>REQUEST</dispatcher>
        <dispatcher>FORWARD</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <servlet-name>ordDeliverMedia</servlet-name>
    </filter-mapping>
    <filter-mapping>
        <filter-name>jhsAuthenticationFilter</filter-name>
        <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>jhsAuthenticationFilter</filter-name>
        <url-pattern>*.jspx</url-pattern>
    </filter-mapping>Somehow the filter-mapping entries for the adfFaces and adfBindings filter got all screwed ? Strange as the application has always worked fine, the only (obvious) problem has been the jspx pages not rendering properly in design view.
Once updating the web.xml with the correct value for these two entries, the pages are displayed correctly :)
While I don't like blindly making changes like this to the web.xml - the application still seems to function !
Cheers,
Brent

Firefox 35 not rendering some progressive jpg files

Followed with interest discussion about a similar problem being experienced by EGCDAN ( https://support.mozilla.org/en-US/questions/1044546).
Before trying to follow the possible solutions offered, I checked the same page with IE 11 and all the images rendered perfectly as they did at one time with Firefox.
You can check this by loading my page http://www.consider-the-lilies.org/Jack-go-to-bed-at-noon.html and hover over the line: "(Other wildflowers in the Gallery with short-lived blossoms include Chicory, Blue-eyed Grass, Scarlet Pimpernel, Virginia Spiderwort, and Asiatic Dayflower.) "
No problem with IE, at least for me; still partial rendering for Firefox for some of the images.
???

I have Win 7 Firefox 35.0.1 > no problem.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Page not rendering correctly

I have a site I am going to that is not rendering properly, instead of seeing a standard page I see a list of links, followed by pictures. Kind of like you usually see on a "Site Map" page. I have contacted the webmaster and he says it does render properly on his safari. It does render properly for me in FF, so I figure it has to be something in my setup. I have disabled all extensions, enabled Java and JS, no go.
Here is what I am seeing on Safari (6.0.5):
Here is how it should render:
Thoughts?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Tableview not rendering correctly

Hello,
I am running into some problems witth my tableview rendering correctly and I think it is related to a SP but I can't find the issue to fix. My tableview is rendering extremely slowly and not correctly at all. Inputable fields are not open for input (even though I opened them up in my iterator) etc... I have searchedthru SDN and OSS and still I can't find an answer to my issue. I put a break point in my start page and started debugging runtime->session_manager->header_script( ). This is the very first thing to execute in my BSP. Even before my window.open('main.do' etc... executes. While I was debugging I started looking at the variables. and I noticed that they are looking funny. For example I displayed MPAGE_CONTEXT->M_OUT and the contents look like this
Strange huh? This BSP is working in our QA environment and the MPAGE_CONTEXT->M_OUT contents are displayed as 15<\CLASS=CL_BSP_WRITER_HTTP>. Has anyone seen anything like this before? I am really pulling my hair out of my head. Did I mention that I have been doing code compares between the 2 environments on everything and I don't see any differences? I have been doing compares on my BSP as well as CL_HTMLB_TABLEVEIW, SAPMHTTP etc.... The only difference is between the 2 systems is QA is on SP47 and DEV (the broken one) is on SP51.
I am getting alot of **illegal reference** in the contents of alot of my variables as well.
I did post a similar question to this one before and I did get some helpful hints that I did try but its still not working. I am hopeing that by adding more description it will jog someones memory.
Cheers,
Rich
P.S. This dang issue is very depressing

Hello Thomas,
Well isn't this an interesting little transaction. After the basis team left I ran it for BSP applications only. What they don't know won't hurt them(hehe). Any way it hasn't resvolved my issue. I re-ran ITMVC2 and when I display variable main_view in do_request of CL_BSP_ITMVC2_MAIN I still get a **illegal reference** in the contents of that field until the create_view method is executed. Then it is displayed as .
Now in the system that works the contents of main_view in do_request are displayed as <>0 and after the create_view method executes then the contents of main_view are displayed as 20<\CLASS=CL_O2DSWT0NXG3ZWICN0VQJDBF4SNB>. No squiggly lines, no colons and no **illegal reference**. The are not alot of differences but enough to give me serious grief.
I have opened a message with SAP and hope to hear from them ASAP. Additionaly I will add what I just did (meaning running a small SGEN) to the message to aid in their debugging.
Thanks alot for your input and if you think of anything else I would be eternally grateful
Cheers,
Rich

JSF tags are not rendered in error page

I have configured error page for HTTP 404 error in web.xml like this
<error-page>
<error-code>404</error-code>
<location>/Common/error.jspx</location>
</error-page>
Faces Servlet is configured as follows
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
My error page (error.jspx) looks like this
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html" xmlns:trh="http://myfaces.apache.org/trinidad/html"
xmlns:tr="http://myfaces.apache.org/trinidad" xmlns:c="http://java.sun.com/jsp/jstl/core">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<html>
<head>
<title>Error Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
</head>
<body id="b1">
<h4 style="color:red">An Error Occured. Please click Back button or Signout.</h4>
<input type="button" value="Back" onclick="history.back()"/>
<tr:commandButton id="cb1" text="SIGN OUT" action="exit" actionListener="#{Login.LogOut}"/>
</body>
</html>
</jsp:root>
When I deploy application and run into 404 error, page displays error message with only Back button. I don't see SingOut button. I have checked url and it follows /faces/* pattern. Still to double check, I made a change and configured servlet mapping in web.xml as
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
<url-pattern>*.jspx</url-pattern>
</servlet-mapping>
Still commandButton is not rendered. I understand that my error page don't have access to FacesContext or not going through Faces Servlet. I know this is a small issue, but couldn't figure out what can be done. I have also tried using .xhtml and .jsf as per googled suggestion. But no luck
I have tried different solutions to my problem and googled for solutions. But I couldn't get it resolved.
So can you please provide any suggestions...
Edited by: user1818355 on May 22, 2013 2:29 PM

I think my faces servlet is configured to handle URLs having /faces/* pattern. I don't have any folder named with faces but I can access all my web pages which have /faces/ in their url. All jspx pages in application are configured in task flows. So I think they have access in FacesContext. But error page is configured in only web.xml and some how it is missing access to FacesContext and not rendering JSF tags. Any help?

Graphics plain 2D objects are not rendered while an action occurred!!!

Hi, I am designing a game in Swing. Currently I am designing the maze for this game. The maze is generated by using Depth First Search algorithm. In my main JFrame, I have some JPanel. One JPanel, named mazePanel contains the maze. There are some other JPanel also, which contains the JButton for controlling. Following is the mazePanel code.
import java.awt.Graphics;
import javax.swing.BorderFactory;
import javax.swing.JPanel;
public class MazePanel extends JPanel {
    private MazeGenerator mazeGenerator;
    private boolean startNewMaze = false;
    public MazePanel() {
        setBorder(BorderFactory.createTitledBorder("Maze"));
        setToolTipText("This is the maze");
    public void addNewMaze() {
        startNewMaze = true;
        mazeGenerator = new MazeGenerator();
    @Override
    public void paintComponent(Graphics g) {
        super.paintComponent(g);
        if (startNewMaze) {
            mazeGenerator.generate(g);
            startNewMaze = false;
} There is one JButton, which calls the method mazePanel.addNewMaze() and set the Boolean startNewMaze to true. After setting the startNewMaze, maze should be generated. i.e. mazeGenerator.generate(g) is inside if() condition. Method mazeGenerator.generate(g) recursively draw the random maze. That is why I don’t want to run this method not more than once.
Up to this everything is looking fine. But while I am running the main JFrame and clicks on the JButton, maze is not rendered in the mazePanel. Sometimes when I minimize and maximize the JFrame, maze rendered (might be because of repaint() occur). Even if I comment mazeGenerator.generate(g) inside if() condition and put some g.drawString(). The string is not rendered while action performed (i.e.Pressing JButton).
Where is the problem? Please help.
Thank you.
Edited by: 889823 on Jan 28, 2012 3:28 PM (Code was not formatted correctly. I forgot to make use of tag)

This kind of thing sounds simple but in reality is fairly tricky. I dealt with these kinds of situations for years while learning java, and still sometimes do.
You only posted a snippet of your code, from which we can't go through and debug what your problem is, but I would just say that this is the general pattern
1. Receive the event to create a new board. This can in reality be any event that will cause your UI to change
2. Do whatever processing you need to do to get your Component ready to be painted again. You can do short jobs on the UI thread. For longer jobs, look at the SwingWorker class
3. When you are done processing and ready to redisplay, call repaint() on your Component. Make sure after you call repaint() that any work being done on the UIThread finishes, so that this thread can then handle the repaint request
Edited by: tjacobs01 on Jan 28, 2012 1:37 PM

Stills not rendering

Similar Messages

Maybe you are looking for